BluRay playback freezes read and Stop or proximity reader

Similar Questions

• Reading problem, when I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB

  When I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB, im using adobe production premium cs6

  Here is my card in my machine.

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: of 2.66 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 cache (per CPU): 4 MB

  Memory: 8 GB

  Bus speed: 1.33 GHz

  It is found on all projects, I'm still under snow leopard, I have a NVIDIA GeForce 7300 GT graphics card, and yes the playhead stops after a second reading of a video in the source and program window.

  After hours of research and troubleshooting, I managed to solve the problem by signing on the standard user and account logging in as an administrator. Somewhere in the standard user account prevents play video.

  I'll recreate a different standard user account and see if that fixes the problem.

  Thanks for your response

• My computer freezes and stops working as soon as the antivirus is used.

  Original title: My computer has detected a virus.

  & He is obviously infected by a virus, but now when you run any number of different programs of not doing a full scan is detected. What should I do?
  I rebooted, it about 3 times & the virus survived still reboots.

  It freezes and stops working as soon as the antivirus is used. When you try to reinstall the Virgin keep PC, gets it to halfway through the installation, stop & comes with a blue screen.

  Hello
   
  What is the blue screen error code?
   
  System freeze may be due to viruses or some third party applications. So let us, start your computer by disabling all third-party services and see if it helps.
   
  Method 1:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
   
  Method 2:
   
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Audio playback starts and stops after a few seconds

  original title: Audio playback

  By my speakers (Windows 7) starts and stops after a few seconds.  I have troubleshooted but found no problem.  I configured and tested with good results, but the problem persists.  Anyone else know this or knows how to solve the problem? PLEASE HELP :)

  Hi NuttyNetty444,

  If you have not already the case, follow the steps in this document. This should solve most common sound problems in Windows.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• Please help me and stop send me around why you money see chargin: Welcome to the Adobe® Acrobat® Reader® DC ReadMe file. Acrobat Reader is the free viewing companion for Adobe applications that produce files Adobe Portable Document Format (PDF from Adobe)

  Please help me and stop send me around why you money see chargin: Welcome to the Adobe® Acrobat® Reader® DC ReadMe file. Acrobat Reader is the free viewing companion for Adobe applications that produce files Adobe Portable Document Format (PDF from Adobe). To create, improve, revise, edit, and share information in Adobe PDF files, read more on Adobe Acrobat Pro ms and Adobe Acrobat Standard DC by visiting www.adobe.com/go/acrobat.

  What is your question?

• Transfer of large files on home network freezes and stop the transfer

  I have a HP Desktop running Windows 7 and laptop HP on Vista 64-bit. I have two networked computers on a home network with a 3Com network 10/100 16-port switch.  When I try to transfer files greater than approximately 2.5 gigabytes between two PCs, file transfer will hang and stop after about 2.5 gigabits. Below the size of this file, generally no problem, the transfer ends. The two PCs have file sharing turned on and as mentioned on any file less than 2.5 gigabits transfer / very well.  Is there some sort of transfer of files, size limit on Windows Vista and 7 OS?  Are there settings that I can change to allow to transfer large files? I got an old Sony PC running Windows XP and I could transfer files more than 2.5 gibabits to my storage device shared networked home without any problem.  But under Vista and 7 OS, even once, I can't transfer any file more 2.5 gigabits to my home network shared storage device.  Anyone has any ideas how to solve this problem? Thank you. NEOhio123

  I fixed this problem on my laptop running Windows Vista 64 bit. I remembered that first of all, this started occurring after that I used the IOLO System Mechanic 9 network optimization tool to optimize the settings of my network on my laptop.  So I ran the cancellation on my Windows Vista laptop, and now the laptop with Vista will once more to transfer large files. If a note to all of you who use System Mechanic... do not function of optimization of the network on a Vista PC tool run... .or if you wash and start experiencing problems of transfer of large files... run the cancel this function and rebooting.  You should be able to transfer large files again. I just sent IOLO an email to warn of this problem with the optimization tool of the network within their product of System Mechanic 9.

  UNFORTUNATELY, my new desktop computer running that Windows 7 has still this problem , it stops file transfers after about 2.5 gigabits are sent to my device of storage attached to the network or the laptop. I learned that this seems to be a problem in a way. I can pull large files of my storage device, network or laptop, I can not just to transfer large files to these devices with the Windows 7 desktop. So if anyone has any ideas of how to resolve this problem of transferring large files with Windows 7, I would appreciate your insight.
  NEOhio123

• MacBook Pro slow and stop, memory or HARD drive or motherboard?

  These last few months my Macbook Pro medio 2012 begins to slow down. I was thinking of a resettlement but has not had the time yet.

  Last month, he really slow started to freeze and stops instantly. It reboots and then I get a gray screen saying with the icon (a card with a questionmark in there) that it cannot find the boot disk drive. I close it again with the button and restart, then it starts normally. This would have me believe it has something to do with my HARD drive or the motherboard, but then again I'm not a tech guy so I guess just really. Then I got the idea to do a test of material, with this error as a result: 4MEM/62/40000000: 0x81d97590

  After searching the Web, it would mean that my memory would be bad/broken. I read in another post to download an app called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong. But today I did once again when my Macbook was slow functioning again and went to do some other stuff. When I came back my Macbook has a black screen, a Word to insert a boot disk. I just stopped and restarted again and started normally. It is a little slow to clear grey screen with the apple logo.

  So my question is, does anyone know where the shoe pinches, RAM, HARD drive or the motherboard? Will also contribute to a reinstall? Can I check if my RAM is always placed properly or is maybe dirty? I use an application called memory monitor for clean working memory from time to time. I'm updating to El captain, wanted to do it instantly when I want to do a clean install on my mac, but I think I'll wait with that I know where the problem lies.

  Really hope someone can help me!

  Kind regards

  Mike

  This was the report on closing down:

  accident report

  Anonymous UUID: 2DD0FAD1-4D38-B739-F019-9F395B5DB6AD

  Sam Nov 28 17:54:55 2015

  Panic report *.

  panic (cpu 0 0xffffff80037c127e appellant): "launchd died\nState to the last Exception:\n\n"@/SourceCache/xnu/xnu-2782.50.1/bsd/kern/kern_exit.c:363.

  News of the UUID:

  uuid = 0x7fff61d7e000

  uuid = 0x108fa1000

  uuid = 0x108ff1000<4396b358-725e-3ec0-bcbb-e4bf75fe1fb0>

  RAX: 0 X 0000000002000001, RBX: 0000000000000006 RCX 0 X: 0X000000010A2800E8 RDX: 0 X 0000000000000000

  RER: 0X000000010A2800E8, RBP: 0X000000010A280190, IHR: 0X000000010A27FF40, RDI: 0 X 0000000000000001

  R8: 0 X 0000000000000000, R9: 0X0000000108FE09F0, R10: 0X00007FFF91399B02 R11: 0 X 0000000000000206

  A12: 0 X 0000000000000000 R13: 0X00007FFF9688D7E0, R14: 0X000000010A2805D0 R15: 0X000000010A280790

  RFL: 0 X 0000000000000206, RIP: 0X00007FFF9139795A, CS: 0 X 0000000000000007, SS: 0 X 0000000000000023

  Wire 0xffffff8021e8a970

  0x00007fff9768fdab

  0x00007fff9768fec8

  0x00007fff976893b4

  0x00007fff9c109a6c

  0x0000000108fcf907

  0x00007fff96a7de73

  0x00007fff96a80dc7

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff80220c1798

  0x0000000108fb8c91

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8021e8a000

  0x00007fff96a8226e

  0 x 0000000000000000

  Wire 0xffffff8021fb15c0

  0x00007fff96a81925

  0 x 0000000000000000

  Wire 0xffffff803a4bd000

  0x00007fff96a8a4e6

  0x00007fff96a8293b

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a821a3

  0x00007fff942c605a

  0x00007fff942c5fd7

  0x00007fff942c33ed

  0 x 0000000000000000

  Wire 0xffffff8037edb2e0

  0x00007fff8fbeaf1a

  0 x 0000000000000001

  0x00007fff61d8a475

  0x00007fff907537b5

  0x00007fff9765e648

  0x00007fff9688d7e0

  0x00007fff9688fddf

  0x00007fff96a7de73

  0x00007fff96a7e8ca

  0x00007fff9688e0a7

  0x0000000108fcc393

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8025fd2e28

  0x00007fff942c33dd

  0 x 0000000000000000

  Mac OS version: 14F1021

  Kernel version: kernel in Version 14.5.0 Darwin: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

  an application called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong.

  This is not the right way to think about memory problems. When the test of the RAM ALL said that there is a problem, it's the truth. RAM problems are very difficult to isolate, and a diagnostic runs, but can't find the problem, if NOT "nothing was wrong" which is "he cannot find the problem immediately."

  This isn't a mystery. DIMM RAM, not another thing is more likely to fail. Then you could try Rember running all night, you could try to remove one of your DIMMs and see if chess stops, you can try to get a new DIMM and see if they work better.

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Qosmio F20 keeps overheating and stops after 4 h

  My F20 is 5 months old and keeps the unit from overheating and stopping. It does when it worked for about 4 hours. I use a cooling and support to the recommendation of the support line, I've updated the bios.

  They also suggested it works without the battery attached unit, but when I removed the unit from the battery and it ran on the sector it would not pass.

  Any suggestions?

  Hello

  First of all, please check the energy saving settings.
  The cooling method must be on "Maximum performance".
  Also change the method of control of the CPU on 'Auto '.

  In addition, you should check if there is enough room around the laptop.
  It is very important because of the airflow.

  In addition, you can check the ventilation openings. It is possible that the cooling fans may not work correctly because of the dust and debris inside the ventilation openings.
  I read a lot of comments here in the forum and it seems that fans of cleaning might help. You can try to use the vacuum.
  But if you do, be careful!

  If the laptop overheats after this procedure so I would recommend contacting the Toshiba service partner in your country. Your laptop should be covered by the warranty at the moment.

• Equium A100-549: DVD & CD playback is slow and jerky

  Hello!
  DVD and CD playback is jerky and slow (sound and image). This problem occurred out of the blue! One day was playing very well and the next, when we tried to play a DVD is a different problem. I put the other DVD that plays very well the night before, but without success - it wasn't the DVD in particular. I tried the audio CD I played before and to my disappointment the same problem. I ripped a CD on my laptop and it played very well - it is not the sound card. I used a lens cleaner, but it did not work.

  I run Toshiba Diagnostics, no problem. I even scanned the HD and defrag, nothing - so I doubt there is a problem with Windows. Problem with two media players, windows one and the Nero one - is not due to lack of players. I drop the phone or hit him or spilled something on it. And this problem really happened from one day to the other. I had all the windows and driver updates two weeks before the problem occurred, by paying in the meantime several DVDs and a few CDs with no problems. What should I do?

  Fortunately, the laptop is still under warranty, but I would prefer if there is a way to fix at home, because services of take time...

  Laptop: Equium A100-549 CM360
  Windows XP
  Matsita DVD Ram UJ841S

  Thank you for your help.
  Vasilis

  Hello

  I hope that your device to factory settings and not your own installation of the OS. You didn't write what CDs and DVDs you use, but I hope that use you the original one.

  Before you play DVD movie try at first to end all unnecessary process and stop the antivirus application if you have one. RedHawk is just, but I'm sure that DMA setting is standard by factory settings.

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• DAQmx: set up a digital acquisition continues with start and stop trigger

  Hi all

  I write because I can not find a solution to my problem.

  As written in the title, I just want to do an continuous (continuous sampling) a digital line. The fact that it's a digital line instead of an analog is no big deal, I guess. I want to start the acquisition on a rising edge of digital trigger (PFI0 for example) and stop acquisition on a trigger too (forehead down on the same signal (PFI0 even then) or a new front amount). This way I could precisely control the time of acquisition or of the start or stop other devices.

  Since this is a digital acquisition, you need to do first "something": create a fictitious analog input task and get the clock back to the digital input. I setting this analogue of the task to start on a trigger. It works but I can't find a way to stop it on another trigger.

  Do u hav no idea how to implement it?

  Finally I have not found an easy way to break cautiously the VI to wait for a trigger (in case you want to start an acquisition with different settings for example). Do you use the task to Abort or is it better to set a deadline to playback digital channel VI until the outbreak occurs?

  Any help would be appreciated!

  Thank you

  Config: LV 2010, latest version Daqmx and USB card or 6251.

  Hi Chris,

  One way is to use counters as Kevin described. For me, it's usually easier to create the dummy task that has the timing engine (as I HAVE), but it depends on what resource you have on your board you will not need .

  In fact, the example is the same thing that you need to measure continues - just what you need to do is remove the counter part and replace the trigger reference to be external (your stop trigger).

  with this approach, you should be able to do the continuous measurement - I noticed that you need DI - in fact with few changes you should be able to use this example. DI does not have its own timing engine, that's why you should use the external sample clock. If we use the example to create dummy HAVE to provide the sample clock, and we start DI task until we start to HAVE fake, then we can get pretty much continuous clock which begins start trigger and stop the trigger of reference.

  Take a look in the change - once again, I have not tested, but logic seems to be OK.

  

  with sincere friendships.

  s9ali

• Why is that when I run a defrag it goes only to 3% and stops.

  1. when I try to run a defrag on my C: hard drive it starts and stops after 3%.
  2 recently, I had to go through the shutdown process twice each time before my computer shuts down.  After the second attempt, he always closes down, but don't not before giving me a message that it can not read memeo and asks me if I want to close.
  3. I'm on a network via wifi with an HP printer and sometimes it prints and sometimes he completely ignores me.

  I don't know if all these problems are related, but I thought that defragmentation can help and then it would not perform defragmentation from 3 percent.  I tried to shut down my computer for several hours before trying again, but nothing helped.  I tried to do a "Clean-up & Shutdown' of my desktop icon and she also reached 3% in the defragmentation and would go no further.

  Hello

   
  1. what version of Windows 7 use you?
  2. What is the exact error message?
  3. do you have any error message when defragmentation fails?
   
  To solve the halting problem, try the next method.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.
   
  To solve the problem of printer, try the following methods.
   
  Method 1: Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 2: Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  To resolve the problem of defragmentation, try the following.
  
  Check your hard drive for errors:
  1. click on start,
  2. click on all programs.
  3. click on accessories.
  4 right click on command prompt,
  5. click on run as administrator
  6 write chkdsk /f /r and press enter
  7 follow the instructions.

• Why is my video playback so choppy and grainy

  original title: WHY IS MY VIDEO PLAYBACK so CHOPPY AND GRAINY?

  I have all the latest drivers installed, IV ' e run each melody of the regime as possible, free of any virus or spyware, and I have a broadband cable connection! It is therefore frustrating IV ' e tried adjusting the video acceleration, screen refresh rate, same added more memory and the problem still persists. Both flash and silverlight videos play well, though a bit grainy and choppy during the action scenes but still another reading of the videos more like a slide show than a real video. Please help it is such a pain!

  You or anyone needing help: Please type msinfo32 in the start menu, and then press ENTER. File | Save on the open screen. File saved on disk sky then paste a link here and I'll show you how to fix things to the top.

  In the meantime, delete your LSO of the machine who follow you in all browsers and destroy the power of lightning:

  AdobeClearFlash

  @OP - a problem I already see with what you have said is "tune up." A proper functioning of that Windows does not have a tune up and these applications only destroy the excellent work that Microsoft has done by making their operating systems. You'll be better off uninstalling applications like that.

  Next best step: uninstall any antivirus in safe mode with 3rd party manufacturer tool. Reboot and install MSE to replace.