Blurry display - PC does not start

Similar Questions

• Display Manager does not start after Satellite A210-117 wakes up from his sleep

  Hello

  I have some difficulty with a Satellite A210-117 PSAELE-00E00MFR. I installed W7 x 64 professional and display driver ATI Catalyst to Radeon HD 2400.

  My graphics card appears in Device Manager as an ATI Mobility Radeon HD 2400 with the current version of the driver 8.970.100.3000 from AMD, and I can't find a better.

  So far, so good, but as soon as W7 goes into 'sleep' or 'hybrid sleep', the display manager does not re - start correctly. He keeps trying to display Windows, but finally the phone re boots.
  But if I put the laptop to 'Hibernate', then he wakes up fine.

  I don't know if this problem is known, because I can't find anything on the Internet on this subject independently to obtain the latest driver. Anyone an idea how to solve this problem?

  Thanks in advance

  Concerning
  Eric

  Post edited by: ebouge

  Hello

  On the page of the Toshiba UE driver (Archive), you will find drivers for Win 7 32 bit A210.
  Driver ATI 8.452 - 080109 is available too.
  Its a previous version and I recommend to test the unit by using this version of the driver

• HP Mini 210 - 1084TU empty is displayed and does not start F10 F2 doensnt work

  When I turn on my HP Mini 210 - 1084TU food cover shows caps lock shift light is solid and the button not fuction - the screen appears blank and not push further.

  What I tried was:

  1 hard reset - 3 times

  2. by pressing f10 or f2 or f11 on power but nothing happens

  Please, guide...

  Found the solution...

  removed the battery cover and just removed the RAM... rubbed with the square of the Eraser again and removed the battery inside waited some time and place it again... and the system is reset... it works... all my data is safe!

• Will be using Firefox recently and I'm very happy with it. However this up-to-date Web site mybroadbandspeed.co.uk does not work. It displays but does not start the speed test. IE works fine. Any ideas please?

  Rebooted PC without result. The laptop has a wireless connection.
  All other wireless Internet connections work fine to this day using Firefox. Internet cable connection to the main PC also works OK with mybroadbandspeed.co.uk

  It's a Flash object then try to update Flash to the latest version via http://get.adobe.com/flashplayer/

  You should do it anyway because the version you have installed currently is a safety hazard. See http://www.adobe.com/support/security/advisories/apsa11-02.html

• Qosmio G20-108 - does not start

  Just buying the G20 - 108 worked OK for about 2 months. Now, after being in charge of the day to the next, powers, gives the startup sound, the lights on the keyboard, power backlight the display but does not start. Sometimes after 3-4 minutes tune windows startup can be heard, not always.

  ADV69

  Hello

  You see the Toshiba BIOS screen after turning on the laptop?
  You can access the BIOS?

  If you see something on the screen and access the BIOS, I would recommend load default settings here.

  But, generally speaking, for the moment, it is difficult to say why this happens, so you should test step by step.

• Satellite P20 does not start - BIOS are not displayed

  I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.

  Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.

  Thank you

  Hello

  Maybe you have a problem with your battery from the Machine.
  Please make a new start without the battery.

  Go that wasn't you maybe has a possibility with a display of extern.

  I hope this is a help.

  By

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• Thunderbird Setup does not start by double clicking on

  Downloaded Setup for Thunderbird 31.4.0
  Double-click the installer does not start the installation program (even if a process is created as seen in Task Manager).
  The reason for downloading the installation program has been that the automatic update failed to 31.3.0 and asked me to download the installer.

  Platform: Windows 8.1

  I tried as admin and also disabling the AV/Firewall.

  A reboot solved the problem and I was able to run the installer and install 31.4.0 after the restart. However there is a thunderbird called "Software Update" window that displays a progress bar and says "Download update" & "Connecting to the update server" - but it seems to be stuck there forever.

  I killed the process of updating the software and the system now seems to be at peace.

  Thanks for the help!

• MacBook Pro-life extendable start-up chime, but does not start

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Have you tried resetting the SMC?

  Reset the management system (SCM) controller on your Mac - Apple Support

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Laptop does not start

  My laptop froze and I had to force a stop to turn it off. Since then, it does not start upward. It shows the Toshiba screen briefly as usual then goes to a screen asking me to start up as usual, or try to repair the startup problem.

  If I choose to start up as usual it displays the Windows logo and then after a short period back to the previous screen, if I choose the option repair the screen turns white with a white arrow cursor display and then nothing seems to happen. I left this white screen on during a few hours, but nothing.

  Any ideas?

  Start your laptop and press F8 to display the advanced startup options.
  It work?

  If Yes please try to start the operating system in safe mode. Can you do this?

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.

• Portege R100 does not start

  Can someone help me please. My Portege R100 does not start, when I turn the following text appears: in touch with tomorrow toshiba. After a few seconds a black screen with a blinking cursor on the left side of the screen.

  Thank you very much

  Hi Rehana,

  The Toshiba screen you will see first is the initial start screen is displayed while loading the BIOS. Once the BIOS has completed its process of loading, the system tries to boot the operating system and it is at this point that you have found the black screen with the blinking cursor in the upper left.

  Unfortunately, this indicates usually that the laptop can not load the operating system from the hard drive, or because the hard disk itself has not the contents have been damaged somehow.

  You might try to charge your laptop in 'safe' mode (press F8 during the initial loading of the BIOS) or you can try to boot your laptop from a bootable CD/DVD and hard drive.

  Finally, you can try to re - install your OS from the recovery CD.

  Kind regards