Bold synthesized in PostScript format

Similar Questions

• Formatting lost bold text after generating report through BI

  Hi Experts,
  I have a problem with printing APEX report to PDF using BI Publisher.
  I created a few Oracle BI Publisher rtf via plugin model in Word format.
  Then, I loaded the xml file and check the preview in PDF format. Everything worked fine in MS Word.
  
  When I run the report via APEX, bold text is simple - formatting is lost.
  I put the correct font in the editor font BI.
  
  Where the problem should be?
  
  Specs.
  Oracle 11g
  BI Publisher 10g
  APEX 4.1
  
  Thank you
  Concerning
  J :D

  Now, what you need to do is to connect to the Publisher BI and under font mappings, ensure that good fat police is installed for this font. If it isn't then you must download the bold font on the server and set it up.

• 8 of blackBerry Smartphones WMV format

  Hi, I was wondering if "BOLD" can support the format of WMV 8. I know that it supports 9 format but it is twice slower than 8 during the encoding of videos.

  I am tired of playing WMV 8, and obviously, he does not play, it may be that there is a way around this problem.

  Thank you

  Alex

  Check the knowledge base articles below-

  Media types supported on the BlackBerry smartphone

• How to insert an image .png in the postscript file that with /ASCII85Decode, filters /LZWDecode.

  Under linux, I want to develop a calibrated printer driver.

  where to print a document, I get sending file postscript postscript printer driver, the content of the file is shown below:

  %! PS-Adobe - 3.0

  %% BoundingBox: 0 0 612 792

  %% HiResBoundingBox: 0 0 612,00 792.00

  %% Creator: GPL Ghostscript 910 (ps2write)

  %% LanguageLevel: 2

  %% CreationDate: D:20151103175615 + 08 '00'

  %% Pages: 1

  %% EndComments

  % BeginProlog

  CurrentFile /ASCII85Decode filter /LZWDecode filter cvx exec

  "(J.'GP1) YJ2: a-L/6rF = & 5] f ', $9VMV4PfsINPg $lJV; < [.@O%03.smQ('PQ#V^%=ggiP:i9P6m1

  (& e, #6QsIUEP1 ^ W4j % > VfmLeP21i ['0XteJ5' - rMBI73qYi] MqRS: _____) [:!] GtMG0% ^! tgdCBfAL)

  [[FIC *'* + _5Lbn > 92]] a #cSAZ & > A@c2Y\jd2S! P$:g'tTf,7oM*o%:D37/I$S.] \mgscphMRIG413

  (Z = Q; ") 5F8) ' Qr"(=NfCOoQ) ibUD "" CCLE1_ #S2 = * J! 5rCj3Lri1 "f$ rI5 + n6R8\ * imVK6JF'6bb

  ...

  In this file, contains a string in /ASCII85Decode /LZWDecode filter, what is the meaning of this chain, this content it contained? And how to generate this string.

  And now I want to edit this postscript file, and add a .png image to print content. How can I do?

  Thank you very much for your help!

  This indicates that the data is compressed with LZW compression, then this is a compact representation of ASCII-oriented. LZW is used in GIF, but this does not mean that someone dumped a GIF file.

  PNG files using Flate compression, but you can't empty a PNG into PostScript file. Your steps

  1. understand the PostScript imaging model.

  2. understand the PostScript image format.

  3 understand how filters are specified in PostScript format.

  4 completely parse and decompress the PNG. I hope that there can be no alpha channel!

  5 convert the PNG data you analyzed in PostScript.

  6. Add the appropriate image transformations.

  7. Add in PostScript. Discover the point of law cannot be simple.

  Working with formats JPEG is a little simpler, as most of the JPEG files are directly compatible with the DCTDecode filter.

  If you do not have the PostScript language reference manual, you need, and you will need to spend a few weeks or months immersed in it...

• BUG - in flash pro CC, "bold" and "italics" TextFormat properties have no effect on the rendered text

  Concise problem statement:

  If you compile with CC pro flash and use the method "setTextFormat' of a TextField, the 'fat' and 'italic' argument of TextFormat properties have no effect on the rendered text. If you compile with flash pro CS6, 'fat' and 'italic' properties work as expected.

  Apparently, the only way to make the text to display correctly with flash pro CC, is to change the name of the font (add the suffix "Bold", "Italic", or "Bold Italic".) This means code that dynamically changes the font styles only works in CS6 or CC, but not both. By example, if you use the "bold" text property makes daring in CS6 and regular CC, whereas if you change the name of the font to add the suffix "Bold", the text makes daring in CC and DOES NOT at all in CS6. It is therefore difficult for a team to CS6 in the CC of transition.

  Steps to reproduce the bug:

  1. create an xfl 2 TextFields on stage, as well with the font "Trebuchet MS" and "regular" style, a named boldTrueText that contains the string "" BOLD"= true", a named fontNameText that contains the string "fontName ="BOLD"Trebuchet MS". Create 2 more TextFields on the stage of Visual reference, both with a font "Trebuchet MS", one with the 'regular' style, one with ' bold '.

  2. Add the following code in the Actions Panel on frame 1:

  import flash.text.TextFormat;

  import flash.text.Font;

  var format: TextFormat = boldTrueText.getTextFormat ();

  format. Bold = true;

  boldTrueText.setTextFormat (format);

  format = fontNameText.getTextFormat ();

  format.font = "Trebuchet MS bold";

  fontNameText.setTextFormat (format);

  var fonts: Array = Font.enumerateFonts (), count: int = fonts.length;

  for (var i: int = 0; i < count; i ++) {}

  var make: police = fonts [i];

  trace ("fontName:" + font.fontName + ", fontStyle:" + font.fontStyle);

  }

  3. Save and compile with flash CS6 pro and flash pro CC.

  Results:

  With flash CS6 pro, "" BOLD"= true" makes "BOLD", and "fontName ="BOLD"Trebuchet MS" IS NOT RENDERED.

  With flash CS6 pro, what follows is drawn:

  fontName: Trebuchet MS, fontStyle: "BOLD"

  fontName: Trebuchet MS, fontStyle: regular

  With flash pro CC, '"BOLD" = true' makes regular, and "fontName ="BOLD"Trebuchet MS" makes "BOLD".

  With CC pro flash, what follows is drawn:

  fontName: Trebuchet MS, fontStyle: regular

  fontName: Trebuchet MS bold, fontStyle: "BOLD"

  Expected results:

  The same text is rendered in flash CS6 and CC pro. I don't know why this behavior has been changed in flash CC pro - it causes silent failures in the code that dynamically changes the font styles. I expected the CS6 flash pro behavior remain the same in the CC, as follows:

  With flash pro CC, "" BOLD"= true" makes "BOLD", and "fontName ="BOLD"Trebuchet MS" IS NOT RENDERED.

  With CC pro flash, what follows is drawn:

  fontName: Trebuchet MS, fontStyle: "BOLD"

  fontName: Trebuchet MS, fontStyle: regular

  If you do not break backward compatibility (to others), you can do both behaviors works in flash pro CC, as follows:

  With flash pro CC, "" BOLD"= true" makes "BOLD" (the police is always 'Trebuchet MS'), and "fontName ="BOLD"Trebuchet MS" also makes "BOLD".

  With CC pro flash, what follows is drawn:

  fontName: Trebuchet MS, fontStyle: "BOLD"

  fontName: Trebuchet MS, fontStyle: regular

  fontName: Trebuchet MS bold, fontStyle: "BOLD"

  I introduced this bug with the form of bug and also with adobe bugbase (in case it is not obsolete) - I'm just trying to maximize my chances of getting a fix.  Has anyone else encountered this bug?

  Thank you for reporting this issue. As a result of your efforts, it is reproducible and reported internally.

  Will update here once the fix is available.

  -Mabrouk

• Formatting issues of legend when inserting variables

  Hello

  I came across a bug similar to what is being talked about in this thread: http://forums.adobe.com/message/3893978

  When I insert a variable into a legend (with police: Tahoma, size: 12, style: "BOLD"), it changes the formatting. The text is larger, in a different location and is a different font.

  Does anyone know if occurred since this thread? I'm trying to match the font of a Web site, so unfortunately the suggested solution style it (put a variable empty in each caption so they match) will not work for me.

  Thank you!

  ___

  More info on exactly what I do:

  The project is a simulation that is registration of the user on a Web site. I have an input box of text with an associated variable (username). On the blades, there is a header on the Web page that says:

  Logged in as: Student 1

  I want to replace the user name that was registered Student (1) by simply change the background in photoshop to clear it and add a text caption that has the username variable. For now, however, the formatting is so that the variable seems strange; I can't match the original text on the Web site.

  It was worse in CP5 in CP5.5, and it depends on the font you use. But it is "by design", the text is rendered differently when the variables are inserted. It's very embarrassing, you can enter a report, do not know if this will help however. Complained a lot about this, also on the fact that you cannot use the actual styles (sometimes they are changed to a completely different font, even the wheelbase to serif).

  Lilybiri

• Metadata to InDesign to PDF via PostScript

  Have been playing with placing the metadata in a file, InDesign CS4 and then generate a PostScript file.  Then distill the PS file to PDF format.  (seems silly, but it's a customer's requirement)

  When I check the PDF metadata is missing.  When I check the PostScript file, I see the placeholders for metadata, just no metadata.

  Any suggestions for how to prepare the PostScript file?

  Thank you

  Metadata (as well as the color management profiles, tagging and much more) are lost when you create a PostScript file, and then use Distiller. The PostScript format is earlier than all these things are ever ready to ensure their conservation. That is why to create PDF in a different way is essential.

  You need to choose file > export > Adobe PDF (Print) or (Interactive) to preserve metadata. You are using the wrong method of creation of the PDF file.

• Illustrator CS5 - can not make custom size during the 'impression' of a PostScript file

  Hi all

  I recently picked up Illustrator CS5, and while this year's model, of course, is beautiful, I'm having a problem when I save a file (or print) in PostScript format. My goal is to convert the file to PDF using Distiller and in the print dialog box, the domain PPD in previous versions said something along the lines of Adobe PDF 8.0. In CS5, I don't have the option to select the PPD drop (I can't find the file you want to add to the list). In addition, I can't do a 'pdf size custom,' only predefined paper sizes. I had to resort to opening my files in CS3 to convert them into PostScript files. I foresee it becoming a problem, once I have start diving into some of the new features in Photoshop CS5.

  I feel that the program has not been installed with a plugin Adobe PDF and I can't seem to find a substitute online which is not 1999 (!). Is there a way to get this plugin file that is using my copy of CS3 in my CS5?

  I'm on a Mac by the way, version 10.6.

  This problem is actually caused by Snow Leopard. The problem is that a new feature of security introduced in 10.6 will not allow the printer PDF work, so you can no longer write a postscript file using the print function. Apparently Adobe has yet to find a work around, or they chose to lose just this feature. Either way, here's the article Adobe describing the problem...

  http://kb2.Adobe.com/CPS/509/cpsid_50981.html

  I hope this helps.

  Fuzz

• Paging PCL Postscript problem

  Hello

  I have several print files that contain a PCL job and one or several Postscript jobs.  The PCL job will print a cover letter that is one or more pages and it is printed front.  The Postscript tasks can be any number of pages from 4 to 9 and must be printed duplex with each Postscript job to go on a new page.  Each task a PCL Postscript code before and after the work of Postscript. I inserted a duplex command in each Postscript job and which produces the duplex output desired with each Postscript job to go on a new page.

  Everything goes fine until I met a file that don't have pages not properly. This file has a job of PCL and Postscript three jobs with pages 7, 8 and 7, respectfully.  When this file is printed the second 8 pages Postscript job starts on the back of page 7 of the first task of Postscript.  In addition, when this print file is sent to my printer it is destroyed in only two print job (the work of PCL and Postscript jobs).  This is in contrast to the other print files when each task in the print file becomes a separate print job on the printer.

  From what I've been able to determine until there are some in the Postscript work that causes the problem because I can take this Postscript job and insert into a print file that works properly and produce this problem in the file of the print job.  I tried to insert a false startjob 0 pop in an attempt to force the printer to put an end to the job, but it did not work.

  If someone can provide some suggestions as to how I can try to debug that file, so I can determine what the problem would be very useful. Thank you in advance.

  David

  Questions about how a particular model of printer manages physical imagery of the mixed flows of PCL and PostScript are really beyond the scope of the language, PostScript itself. It is questions about how a particular printer manufacturer implements its pipeline of page in conjunction with the transition from one language to the other treatment. The solution would probably vary from supplier print to print the vendor and model of the printer even with printer model. Nothing explicitly to the PostScript format for you help with this particular problem.

  I suggest that you only contact your printer's technical support organization. They would be (or expected) have information that may help you solve your problem.

  -Dov

• Dear God help me! Why Adobe should turn PhotoShop into a one-program-fits-all solution?

  Hi people,

  It is a form of cry a hole deep enough... I am a professional Retoucher and Artist/Illustrator... Not to boast or waving for attention here, but I spent the last two decades at the top of my game, where using photoshop is concerned, but it seems that this comfort zone is over... I'm drowning my beloved software turned to quicksand under my feet. The very foundation of my professional knowledge has turned to despair because I don't know what to do about this!

  I was silently dying for about two months now after having upgraded from CS3 using CS5... Whenever I update, I roll with the punches. There are sometimes good things, but especially now, professionally speaking, the bells and whistles just weigh down me. Adobe moves the goal post trying to respond to casual users, while undermining the elegance of the function first in the program.

  The question that started me here today is, "removal of pixels" using the "Delete" key when in quick mask, it's driving me crazy...

  PLEEEEASE someone tell me how to disable the 'fill' dialog that appears whenever I press the DELETE key (when I'm in the quick mask).  I want to just delete the "background color" (as I've done since the beginning of time) without the dialogue that adds a new step in the process... It used to be that if I wanted a 'dialogue', I simply press 'shift + delete' (which was a PERFECT solution when I wanted more options), but now this 'shift + delete' is the default position and I don't know how to get around to keep my workflow simplified as possible... Time is money, and the madness at work is a bitter reward for the upgrade of a piece of really professional software.

  I ask Adobe, why trouble what is not broken? ... It used to be perfect... NOW I have 20 YEARS ' worth of reflexive habit creating anxiety in my workflow whenever I now try to use this database functions. It is amazing to be honest. I'm using Photoshop since version 2.5, and the point is that I used to use all Adobe graphics software programs in a concentrated state of MINDLESS... it's to say, ' without thinking '. But no more...

  What's with the constant will to these things too? Once the most elegant of all the software programs (even means Adopbe Illustrator, which reached its peak at version 6), using Photoshop today reminds me heavy Corel Draw dates back to 1989, which was so big and horrible compared to the 2 Illustrator and photoshop 2.5 in those early days... Once upon a time, you knew what the program was, and you know what you had to do the work GET done using the tools available. Now, instead of using the full extent of the program and all these "benefits" I ignore a large part of them, coz they mess HALL added things...

  I want the simplicity of 'form follows function' in the software...

  I have to ask, what's with the new 'zoom' in the PS that doesn't work the same way in other CS5 programs, which are the same as the older versions? ... It is not a bad zoom, actually it has its strong points when you used to, BUT, there is a deployment ridiculous, half-baked idea that should have been implemented across the entire suite programs prior to release. Now, I am suffering between the new zoom jerk in the PS and the traditional zoom (perfect condition) which remains in Illustrator and indesign. It's like having someone cut the grass unless you walking along minding your business.

  You want to work with 3D? ..... Why not use a 3D program dedicated to who will do the job properly and leave the retouch editing tool... I want just a chisel which has a 'Blade '... I have need a tracking radar garnished with x-rays that also allows me to see through walls when firing grenades at my woodwork. ALL I want is hardened steel, and a solid feel in my hands... The program to weaken the bells and whistles in PhotoShop. ..... . WHAT the hell is the 3D feature in Photoshop for? ... Abobe should bring back Dimensions (since nothing they have done since the abandonment of this program can hold a candle to the functionality of this EXCELLENT program niche) for TRUE 3D construction and rendered in postscript format.

  With extensive experience and skills in reference is now an inflexible "rod" down my back, when it comes to this new version. It feels like 20 years of competence goes in the toilet. And for what gain for the serious and capable user? Software and interface additions that undermine the essential power of these once wonderful programs to work effectively, is finally bold and a burden that the software itself does not have to bear.

  Does anyone think this way? Is what someone else frustrated by the bells and whistles overbearing? In my humble opinion, Photoshop has turned to sludge. Try to be all things to all people might expand the market and sell licenses, but she leads me into the wall on a daily basis... Maybe I'm just too old, but I want to get out the tools now...

  Someone please give me and answer this riddle of 'remove key '... I'm going to lose my mind do my 'job '.

  Thanks in advance.

  Sincerely,

  Charles

  Post edited by: blackdog667

  Regarding deleting key bringing up the dialog box to fill (this happens only on a layer of background BTW) - the development team implemented this way to allow the discovery of the user of the Content Aware feature - which is what you want to use for most users, when you delete a part of an image. In earlier versions of Photoshop, the delete key was located to "fill" will be background color (this also only occurs on a background BTW layer) for which he was already a shortcut (cmd + delete) who loses his reason makes the shortcut [Remove].

  Zoom behavior change was also a case of discovery of the user. It is in fact fairly intuitive if you're not used to the way inherited from the zoom. The key is to understand how the new behavior.

  Activate the zoom by clicking on the area you want to zoom in on and hold down the mouse button. When you drag to the right, you zoom in on the point where you clicked initially. When you drag to the left, zoom you out to the point where you clicked initially.

  If you decide that you still prefer the old behavior, you can disable the new behavior by selecting the Zoom tool and unchecking 'Scrubby Zoom' on the toolbar options.

  As pointed out by other users, it seems that you need to update your OS and Photoshop with the latest updates.

  Photoshop to keep updated: http://adobe.ly/PS-Up-To-Date

• half top of the textInput is not visible

  So, I'm working around the issue of text using qnxui.swc and QNXSKins.ane entry in Flash Professional CS6. Now, half upper text in my inputText field is not visible on the BlackBerry Z10.

  It works fine when tested in Control/Test Movie / In AIR Debug Launcher (Mobile), but after installation on the Z10 BlackBerry the textFormat makes the top half of the text disappears. The text is no textFormat tiny 8pt.

  Import qnx.fuse.ui.text.TextInput;
  Import qnx.fuse.ui.text.TextFormat;
  Import qnx.fuse.ui.text.TextInputIconMode;

  public var inputField:qnx.fuse.ui.text.TextInput = new TextInput();

  format = new TextFormat();
  format.minSize = 20 * screenscale;
  format. Color = 0x000000;
  format.font = "Arial";
  format. Bold = true;

  instformat = new TextFormat();
  instformat.minSize = 20 * screenscale;
  instformat. Color = 0 x 999999;
  instformat.font = "Arial";
  instformat. Bold = true;

  inputField.format = instformat;
  inputField.addEventListener (FocusEvent.FOCUS_IN, blackinputtxt);
  inputField.addEventListener (KeyboardEvent.KEY_DOWN, checkenter);
  inputField.width = 200;
  inputField.height = 100;
  inputField.text = thisname;
  trace (InputField.TextHeight);
  inputField.clearIconMode = TextInputIconMode.UNLESS_EDITING;
  inputField.x = s140;
  inputField.y = 20;
  inputField.maxChars = 11;
  inputField.restrict = "A-Za-z0-9."
  addChild (inputField);

  Thanks for the boost in the right direction. Apparently textInput.format must be set after textInput.text. In addition, do not use textInput.prompt that I couldn't solve the problem with command prompt. It's the only way I could get textInput to work without using the hack of the space. I guess it will be backwards compatible with the old BlackBerry OS 10 the textFormat cannot modify properties of text except the color.

  package
  {

  import flash.display.MovieClip;
  Import qnx.fuse.ui.text.TextInput;
  Import qnx.fuse.ui.text.TextFormat;
  Import qnx.fuse.ui.text.TextInputIconMode;
  Import qnx.fuse.ui.text.TextInputBase;
  Import qnx.fuse.ui.text.TextFormatStyle;

  public class textinputfix extends MovieClip
  {

  public var inputField:qnx.fuse.ui.text.TextInput = new TextInput();
  var format: TextFormat;
  var instformat:TextFormat;

  public function textinputfix (): void
  {

  format = new TextFormat();
  format. Color = 0x000000;

  instformat = new TextFormat();
  instformat. Color = 0 x 999999;

  }

  public void enterplayername(thisname___tring):void
  {

  var text = thisname;
  inputField.addEventListener (FocusEvent.FOCUS_IN, blackinputtxt);
  inputField.addEventListener (KeyboardEvent.KEY_DOWN, checkenter);
  inputField.width = 200;
  inputField.height = 50;
  inputField.text = text;
  inputField.clearIconMode = TextInputIconMode.UNLESS_EDITING;
  inputField.x = 140;
  inputField.y = 20;

  inputField.maxChars = 11;
  inputField.restrict = "A-Za-z0-9."
  inputField.format = instformat;
  addChild (inputField);

  }

  public void blackinputtxt(e:Event):void
  {

  inputField.removeEventListener (FocusEvent.FOCUS_IN, blackinputtxt);
  inputField.text = "";
  inputField.format = format;

  }

  public void checkenter(e:KeyboardEvent):void
  {

  If (e.charCode is 13)
  {

  internship. Focus = null;
  inputField.removeEventListener (KeyboardEvent.KEY_DOWN, checkenter);
  setplayername();

  }

  }

  }

  In this way, you can pass a string 'User instructions' inputText and it will appear grey. Once the user clicks the inputText field, instructions disappears and the text entered by the user will appear in black.

• Difficulty garbaged PDF

  Hello!

  I have a bucnch of documents in PDF format (~ 2500). The problem is that most of tham have some sort of garbage: there are a lot of characters of 'emptysquare '.

  Here is an example search PDF in Acrobat Reader (XI)

  

  And here is the document itsrelf example: http://s3.amazonaws.com/adobe_test/m_05_0007.pdf

  My goal is to make all these documents are displayed correctly, and I hope that you can offer tools or ways to reach my goal.

  What I tried:

  1. edit this file with Acrobat.

  Since some fonts are embedded, Acrobad told me to install Swiss721SWA font family. No problem.

  After installing the fonts, I was able to make changes, removal of the square characters and pressing space makes its own character.

  But there are real problems:

  -positioning of the cursor is not accurate on these characters of 'place '.

  -After removing the 'square' with backspace character, the text "jumps" and it is not easy to return to the proper position.

  -J' I need to edit files of more than 2000. 2 problems described above makes the goal with respect to the moon.

  2. I tried to export the file in PostScript.

  I have no knowledge on the Postscript format, nor any of the analyzers

  Using the method of trial and error, I found the sequence which is mapped to these "squares", and using automated "Find and replace" tool was able to make the change, BUT:

  -export in PostScript is not automated. Is there a way to create a bacth job?

  -It turned out that the same sequence of code (in some cases) the '-' character as well, so they got lost after the treatment. As I said earlier, I have no knowledge or postscript Analyzer. I've been able to identify, with my own eyes, how to distinguish the two sequences: when it encodes '-' char, text inside certain blocks of Postscript.  The block is started with the sequence of text XRRX [B] N [/ b] and ends with XRRX [B] M [/ b]. But these sequnces are generated randomly in exposrting and each bock in each document has a different ID. And I am really unable to "search / replace" tool allows to identify them.

  -J' have to bulk PDF hyperlinks. They are not exported to the PS, nor can I copy links to the original PDF on a newly distilled from Postscript.

  

  The doc after conversion: http://S3.amazonaws.com/adobe_test/m_05_0007_ps.PDF

  3. I tried to remove the PDF of embedded fonts.

  -It seems to work better (except some "square," which always there)

  

  ( http://s3.amazonaws.com/adobe_test/m_05_0007_unembed.pdf )

  -hyperlinks preserved sre

  BUT:

  -I lose a few original formatting on machines pre-installed wihtout Swiss721SWA police. CAN I INTEGRATE FONTS AGAIN? How and which tool to use?

  -It is not automated. I need to open and save more than 2000 files manually.   Is there a way to automate the removal of the embedded fonts?

  OK I can perhaps live without police exact match, but spend the days of opening and saving these files is not a proper way.

  4. the FireFox browser displays this PDF files very well (latest FF uses it's own PDF processor).

  

  -It is only FF. I can't save in a nice look.

  5. I tried Adobe InDesign, because someone says that it is used for the design of PDF documents, but he could not even open a PDF file.

  So to summarize:

  -What tools are best used to remove the "characters".

  -Is it possible to embed fonts in the PDF format.

  -Is it possible to automate the removal of the embedded fonts (all or specific) PDF?

  -Are there any other ideas?

  PS: What makes the Adobe Reader software to view these squares?

  Aandi Inston wrote:

  I think that if you were able to get this analysis by Adobe (and it is unlikely in the extreme), you will find that the bug was in PREVIOUS versions to not show the character notdef. It may also have been a bug in the old Distiller, or it can have faithfully retained a bug in PostScript.

  Confirming that, in fact, the problem is in the PDF itself. Apparently, the space character itself is not defined in the police and as a result, according to the specification PDF .notdef glyph (the square box) is displayed. Because we do not have the original document or the intermediate PostScript that has been distilled to produce this PDF file in Acrobat 4.0.5 (released over 15 years ago), it is difficult to determine where in the process screwed up things. We know that valid fonts of the era, with standard desktop applications, this is not a typical result.

  Examining the inner workings of the PDF file, I can say that when there are valid areas that show on the page, it's due to displacement of the horizontal current position rather than actually insert a space character.

  The current versions of Acrobat and Reader do the right thing by viewing the PDF file, as is.

  With regard to the possible "fixes", given that the file you provided has been protected by password, I couldn't try a few things such as incorporating policies and then re-incorporation even (assuming that you have access to the same) using preflight in Acrobat Pro.

  -Dov

• Error postScrips

  I am a user of Indesign CS2 and I have a problem with the PS files. export to pdf. files. First is PS file much bigger than in the previous amendment to this document (I modified the text only, no graphics), and Moreover, it is impossible to create a pdf file. This file PS files.

  Agy weeks is everything is OK.
  Could someone advice me?
  thnx

  h.

  Exported PDF can contain live transparency, layers, bookmarks and other interactive content, marking of Niçois visually handiccapped users and so on, rather than who is supported in PostScript format.

• Purpose of Converter PDF Adobe Advanced Options

  I am curious about the purpose of the " Advanced Options " (also called " Advanced Document Settings " "") for the Adobe PDF virtual printer.  For example access from an application via

  Print(.. . Select Adobe PDF as printer) > Properties > Layout > Advanced .

  I've included a screenshot for clarity.

  Options include the Paper Size .  Above all, I am interested in the creation of PDF to MS Word documents, and the layout in Word would negate the Paper Size option, I'm pretty sure.

  There is an option for Print Quality .  But the joboptions files (profiles accessed via ... > Properties > Adobe PDF Settings > Default Settings/Edit ) seem to control the ultimate resolution output printing.

  There is an option for PostScript Output Option , with possible selections including " Optimize for Portability "and" Archive Format ". ""  I'm interested in the PDF/A output, but these two evocative PostScript options appear only useful if the postscript file was going to be created/used/manipulated.  It seems that nowadays the postscript file is not usually explicitly created, but serves as a 'hidden' intermediate in the creation of the PDF file.  See also http://www.freeframers.org/archive/01/msg00050.html

  Am I right to conclude that the 'Advanced' options are a feature inherited , not useful to anyone who creates PDF files in a single step - instead of printing to a file in postscript format, followed by the creation of PDF files using the Distiller?

  See for example http://forums.Adobe.com/message/1240330#1240330

  Kind regards

  DIV

  I pretty much agree. However, the print quality may be a great. I use 300 dpi and a lot of people recommend 600 dpi. The 1200 dpi is well beyond what is normally required. A place where the 1200 is a major problem is in preparation of slides in PDF format. If you have drawn with lines of 1 pixel color, they will be 1200 dpi. Imagine the problems when viewing on a 96 dpi screen, a factor of more than 12 less pixels. A yellow line 1 pixel is almost unreadable because of the way the line is sampled for display. If 300 dpi is used for print quality, then there is no problem. I found this one on the hard.

  Most of the other settings let you alone, or change somewhere else.

  In your example of another post DOC file, your A4 came out as a letter for me. The paper defined in the DOC file is A4. My default in Acrobat's letter. Thus, the WORD does NOT replace the printer setting. You must set the paper in the printer separately, similar to the right paper in the printer.

  I'm still struggling with all the differences that you are trying to report on your other post. There are differences, but I am not sure of the reason. You might want to look at a page in the PDF document audit optimize see were the resources are used.

• ORARRP REP-826: printer driver invalid "ps" specified by the DESFORMA parameter.

  I'm trying to implement ORARRP to print the text or pcl web.show_document. It is ultimately being able to print to a queue of windows which is a redirect to a doclink server to capture the report for the conservation of documents. The doclink server can only read text or pcl and is able to decolate pages and the index for later retrieval.
  
  My application server is on Windows Server 2003.
  I configured the file httpd.conf with the following MIME types: (using Enterprise Manager Application Server Control)
  application/x-orarrp-text .rrpt
  application/x-orarrp-ch .rrpp
  
  My form code is the following: (directly from the white paper "Oracle Reports distance printing utility - 1.3.4 with my settings)
  
  DECLARE
  Report_Id report_object;
  hTimer timer;
  vcFile VARCHAR2 (255);
  vcResult varchar2 (30);
  BEGIN
  / * Generate a unique file name Pseudo-aleatoire * /.
  vcFile: = get_application_property (USERNAME) | TO_CHAR (SYSDATE, 'YYYYMMDDHHMISS');
  / * Us will produce Postscript output in this case therefore add an extension of .rrpp * /.
  vcFile: = vcFile |'. RRPP';
  / * Find an existing report object and set the parameters * /.
  REPORT_ID: = FIND_REPORT_OBJECT ('test_report');
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_EXECUTION_MODE, batch);
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_DESTYPE, file);
  / * PostScript format * /.
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_DESFORMAT, 'ps');
  / * Desname in our file name generated
  Note: < PhysicalDir > refers to a location on the
  Web server that we read from SHOW_DOCUMENT() * /.
  SET_REPORT_OBJECT_PROPERTY (report_id, REPORT_DESNAME, 'c:\runtime\': vcFile);
  / * Set the name of the report server, once again, that would be softcoded * /.
  SET_REPORT_OBJECT_PROPERTY (REPORT_ID, REPORT_SERVER, 'rep_aporaapp_frhome1');
  / * Save the report managing in a world as well * /.
  : OVERALL. ReportHandle: = RUN_REPORT_OBJECT (report_id);
  / * Save the filename generated for use in the when-timer-expired * /.
  : OVERALL. PrintOutPut: = vcFile;
  / * Create a timer to monitor the reports.
  It is set to check 4 times per minute * /.
  hTimer: = CREATE_TIMER('PRINTER_QUEUE','15000',REPEAT);
  END;
  
  
  When I run the trigger of the form, I get:
  FRM-41214: cannot run the report.
  
  and if I don't
  http://aporaapp:7778 / reports/rwservlet/showjobs
  I get the following:
  
  Completed with error: < br > REP-826: printer driver invalid "ps" specified by the parameter DESFORMAT.
  
  I'm only able to get the report to the compilete with REPORT_DESFORMAT, "pdf".
  
  any help would be appreciated,
  Louis
  
  Published by: user1065650 on September 29, 2009 14:26
  
  Published by: user1065650 on September 29, 2009 15:24

  Hello

  To retrieve the output generated by the reports, you must use a URL like:

  : http://application-tier server: port/reports/rwservlet/getjobidxxxx & Server = repservername

  where:

  -xxxx is the jobid returned by RUN_REPORT_OBJECT
  -repservername is the name of the report server

  Concerning