Formatting lost bold text after generating report through BI

Similar Questions

• Right side of the text in the report are cut during report generated in PDF format

  Right side of the text in the report are cut during report generated in PDF format.
  In the report layout text is FLUSH JUSTIFIED. Text block is the same size as the outer frame.
  When the report is generated in PDF format, text is only JUSTIFIED to the LEFT and to the right looks like cut. Text beyond frame is invisible.
  But when I text selection in the PDF report that all the text is selected and I can copy and paste this text into any editor.
  What is a cause of this error and how can I solve this problem? In my view, there is error in report engine.
  Report Server Version: 10.1.2.3.0
  
  See photo. [http://1.bp.blogspot.com/_tSW8j23gT08/TKXn84zyRMI/AAAAAAAAAGE/KkNibanTSao/s1600/report_error.JPG]

  Don't know what your operating system and it could make a difference. If you're on Unix/Linux, try changing the uifont.ali file. (make a backup first!).

  Here is an example of the changes that I made to correct a similar problem:

  # Mapping of MS Windows

  #Arial = helvetica
  # 'Courier New' = courier
  # "Times New Roman" = times
  #Modern = helvetica
  #"MS Sans Serif" = helvetica
  # "MS Serif" = times
  # "Small fonts" = helvetica

  #Arial = 'arial.ttf '.
  Arial = helvetica.8
  "Courier New" = courier.9
  Arial.12 = helvetica.8
  #helvetica.12.Bold = helvetica.9
  #ArilMT is helvetica.9
  # "Albertus Extra Bold" = helvetica.9

  [PDF]

  #Arial = courier
  #arial = courier

  # Support for the languages of the far East:

  #itcadvantgardegothic = arial
  # "ITC front guard Gothic" = arial
  #itcadvantgardegothic = arial
  # "ITC Avant Garde Gothic" = Arial
  # changed to courier 06-25-2009
  itcadvantgardegothic = Helvetica
  #itcadvantgardegothic = arial
  "ITC Avant Garde Gothic" = Helvetica.11

  # Required
  #itcadvantgardegothic = arial
  # "ITC Avant Garde Gothic" = Arial

  [PDF:Subset]

  #times = "times.ttf".
  #courier = "cour.ttf.
  #helvetica = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  # 'Avant Garde' = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #itcadvantgardegothic = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  #courier = "cour.ttf.

• How to "BOLD" a static text in oracle reports 10g.

  Hi all

  I've created a report manually, I want "BOLD" type static text... I have tried with conditional formatting, but thanks to the conditional formatting, it not bold text, it "BOLD" fields only.

  How can I get "BOLD" static text. I tried with SRW, but it does not work...

  Here is the code I try, it gives no error when compiling, but it does not work...

  If (: emp_pension_type AS a 'RETIREMENT')

  then

  SRW.set_font_weight ('BOLD');

  end if;

  Windows server 2003 operating system

  DB 11g

  10g generator

  any help will be grateful...

  THANKS for the cooperation, I solved the problem with the method of column alias.

  Thank you very much, Mr.

• Formatting of "BOLD" reg. apply to text

  Hi all

  Can someone help me with this problem. I need apply formatting to bold the specific text of the textframe content.

  Here's the scenario.

  var SEQ = 0;

  var doc = app.activeDocument;

  NP = doc.pages.add ();

  Marg = np.marginPreferences;

  GB = [marg.top, marg.left,

  doc.documentPreferences.pageHeight - marg.bottom,.

  [doc.documentPreferences.pageWidth - marg.right];

  oldRuler = doc.viewPreferences.rulerOrigin

  doc.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;

  var aqFrame = doc.pages [-1].textFrames.add ();

  aqFrame.geometricBounds = GB;

  previousTextFrame = .textFrames doc.pages [-2] [0];

  for (var aq in aqCont) / / aqCont Array have a content

  {

  SEQ = (aq * 1) + 1;

  aqFrame.contents += 'Q' + seq+ "\t"+"Au:"+"\t"+aqCont[aq]+"\n";

  }

  doc.viewPreferences.rulerOrigin = oldRuler

  In this, I need 'Q' + seq IE Q1, Q2, Q3... one must be bold.

  Power required:

  Q1     UA: Text1

  Q2 AU: Text2

  Any help is greatly appreciated. Thanks in advance.

  ~ Sathya Rani M

  Hello

  If there is not a separate for those paraStyle content you can do forward

  (charStyle 'Fat' is defined):

  sBold = doc.characterStyles.item("Bold");
  aqFrame.paragraphs.everyItem().nestedGrepStyles.add({
       appliedCharacterStyle: sBold,
       grepExpression: "^Q\\d+"
       });
  

  execution after the content is placed

  Jarek

• How to set the size of text with the report generator

  Hello.

  I'm trying to set the size of the text with the report generator, but I find that I can't do this. Here is an example of the code that I use. Can someone tell me what I'm doing wrong please?

  Thank you, Alec

  

  I was generation from a word template.

  I hacked my version of the Toolbox to give me maunal indicator control "model? He had obtained his permenatly self stuck on "T". I exposed this flag outside the API, so I can control under certain weather conditions I may or may not use the model police.

  Does anyone know how to use this toolkit, or I did the right thing?

  Cheers, Alec

• Unwanted in PDF format bold text

  Windows 7, Word 2010, Acrobat X Standard

  I created a Word document with non-bold text and many images (.png for most).

  After creating the PDF file, the text on each page containing an image is "BOLD".

  I discovered that if I check the box for Create PDF/A-1a: 2005 compatible file, , then the text is fine. However, I can delete is no longer the additional empty page that Word insists on adding.

  Short of conversion all the png to jpg, does anyone have a work around?

  Thank you

  Mary

  How do you convert your Word to PDF file? You use the add-on PDF machine? In the Word Options in the Save category you embed the fonts in the selected file?

  In Acrobat X, if you change to Edit > Preferences > Documents category view the document in PDF/A mode "Never" you can delete the extra page.

• How to change the report batch header text in the report dynamically?

  Hello, everyone. Now I use teststand to measure a voltage test point.there value are a PIN in the control circuit of this values.now I want to change the report batch header text in the example of report.for, I use only one step in a sequence file and can use an expression to change the PIN value.now I want to change the header text batch report through the movement of the expression.i is not found of teststand help document.how I do?

  Thank you ~.

  my email is [email protected].

  In addition, I'm sorry to tell you that my English is poor.if you have any questions, just tell me as soon as POSSIBLE.

  I'm looking forward to your reply ~ ~ ~

  Hi sar818,

  This article points to the name of the step, you can modify with the TestStand API:

  Step.Name = "newStepName".

  You can call it is the expression of position of the step:

  

  Note that this change will only continue during execution.

• Lost the remote TCP/IP connection through NOR-MAX

  "" Hi, I try remotely LeCroy WaveRunner 104Xi oscilloscope through "resources VISA TCP/IP" option in Control Panel OR MAX, but the VISA session is lost (0xBFFF00A6) right after I viWrite the '* IDN?" order several times.

  Here's my full configuration process:
  1. install the Passport VISA LeCroyVICPPassportInstaller_1.0.8.exe , LeCroy oscilloscope

  2. setting of the session to follow the instructions (as per joint, LAB_WM827.pdf)

  [by the way, I'm not able to configure the session as "VCIP:'type', I only be able to configure the session asTCPIP0:: 1861:OCKET" ""]
     
      TCP/IP resources VISA-> Create TCP/IP new resource...-> Raw Socket
     Set the IP address: 137.57.96.8 (this IP address is successful to be ping by PC and this address is of course belong to the 104Xi WaveRunner oscilloscope)
  Set the port number: 1861

  3. then, there will be a new resource under "resources VISA TCP/IP". Select this option and 'VISA Open Session'. A dialog box will be retractable to the communication of the instrument.

  4. go to the tab "viSetAttribute", the value VI_ATTR_TCP_KEEPALIVE to VI_TRUE, VI_ATTR_TMO_VALUE the value of 15000.

  * NOR-MAX Version: 3.1.1.3004
  * Connection: The ethernet cable is used through the server (No 1 to 1 connection) of the company,

  "After all this, I send '* IDN? \n"(dans l'onglet viWrite ), it returns the value 0 (which means no error occur) and return 6 counts. " So I try to read a buffer (in the viRead tab), but it send me error timeout (VI_ERROR_TMO). After that, I erase the buffer in viClear. Then, I repeat same steps, this time he (viRead) return me connection lost error (VI_ERROR_CONN_LOST).

  This situation is repeated every time that I reopen it new session. In the meantime, I also doubt that the viWrite did send the command to the oscilloscope or not. The oscilloscope was no response after that I have send "ASET" (WaveRunner 104Xi order for autosetup oscilloscope) through the viWrite tab.

  I am out of ideas now.

  What's my configuration OR-MAX problem? or hardware problem? or a server problem?

  Please advice... need help badly.

  Thanks in advance.

  Hi wcsoh,

  Alan and LeCroy Support here...

  Use the type of connection (LXI).  The problem is that when you use the connection TCP/IP (ACIP) type, you cannot configure the WaveRunner 104MXi as a resource of VISA's TCP/IP in MAX.   Note that MAX is not 'hip' to recognize any instrument type TCPIP, including extended via ACIP LeCroy.  To use LXI, go to utilities > utility configuration... and then to the 'Remote' tab, where you will find the button on the left side of the screen of config to use 'LXI '.  If you don't see this button, you will probably need to update your firmware.

  With the type of connection (LXI), you can automatically find the scope through MAX, enter this amount as a VISA TCP/IP resource and configure an alias as well...  You can also point your web browser to the IP address of the bezel, and you will see a status page with information, including the name VISA always useful resource to use when you configure the scope in MAX.  (Note, however, there is no need to use MAX at all when the connections of VISA to LeCroy oscillloscopes!)

  Here is a link to an application note written by me which deals with the LXI interface, including information about the configuration of MAX to show scope: http://www.lecroy.com/tm/library/AppNotes/LXI/LXI_Interfacing_AppNote.pdf

  Do not hesitate to contact me for any question!

  Best regards

  Alan Blankman

• problem setting highlight and bold text?

  I use the version of Microsoft WORD 2007 (version Home & student) lately I m having problems with the implementation text highlight and bold.

  When I left click on the text and move the cursor over them and then release the left button the highlighting disappears. In addition after only three or four tests then the wedges of implementation highlighted, but when I try to "BOLD" text, that nothing happens unless I click on 'B' "BOLD" several times. It goes the same for Itals and underscore. How can I fix? Or is is a corrupt software. I bought the new program three years ago.

  Basil

  This happens anywhere else? Your mouse may be coming to an end.

  Try your keyboard. To highlight, press ctrl + shift + arrow keys. "BOLD" press Ctrl + b. underline Ctrl + U, italic Ctrl + I

• Reports that run "Generating Report. Please wait... "forever

  Does anyone else have this problem?  I have several reports that when they contain a lot of data, run forever, and I never get the report.

  For me, this isn't a bug. But I'm picky like that. In 6.5.1 vFoglight (Foglight core 5.5.8) all report/view/process that runs longer than 5 minutes are killed by the kernel Foglight engine. It is a mechanisim of security to kill the process of "thugs."  I recommend you research that vFoglight infrastructure. I solved this problem for many customers to set up the database server or vFoglight for a better response. We'll find out why it takes so long for the execution of the report. Also if you try 'Generate report' planning report. The option 'Generate report' maintains a link between the client and the host vFoglight and the connection may time out. The report may have been generated, but your connection to vFoglight host has been lost.

  VFoglight 6.6 resolution is to show a progress bar with more advanced user. I don't know if the 5 minute limit has been developed. So if the underlying infrastructure is to have the relationship may not always work.

• OLIVIER 11.1.1.10.1 - load Plan "From field only and charge (SDE and SIL)" fails at the step of the task was not able to generate report

  Hello

  I installed and configured OBI Apps 11.1.1.10.1 according to the documentation.

  The source system is Siebel CRM 8.2.2

  When I try to run the domain only extract and load ', its fail with the following error message.

  ODI-1217: GENERATE_FAILED_TASKS_REPORT Session (230500) fails with return code 7000.
  ODI-1226: step tasks could not generate report fails after 1 attempt.
  ODI-1232: Procedure tasks could not generate report execution fails.
  Caused by: org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File '< string >", line 11 in < module >
  File '< string >", line 11 in < module >
  "__Pyclasspath__/codecs.py", line 817, in open file
  IOError: [Errno 13] EACCES: "C:\\oracle\\Middleware\\instances\\instance1\x08iapps/logs/etl/BIA_DW_ETL_LPI_Summary_1500_1_230500.html"

  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2925)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2637)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1898)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:583)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:514)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1074)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:133)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:84)
  at java.lang.Thread.run(Thread.java:745)

  I'm not understanding where his picking the path (shown in red). Can someone help me with this matter?

  Let me know if you need more information.

  Thank you

  Is choosing the path of a physical schema mapped to the logical schema DW_BIAPPS11G_LOG_FILES.

  Physical schema is likely to have the value as follows - C:\\oracle\\Middleware\\instances\\instance1\biapps/log

  Change this path journal of topology ODI use a bar oblique /biapps instead of backslash \biapps. Issue seems to be because \b is a special character and applies only to the windows platform.

  This should solve the problem: C:\\oracle\\Middleware\\instances\\instance1/biapps/log

• The screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. What should do?

  I installed upgrading W7 W8. Already during the final phase of installation, the screen of my Sony Vaio laptop VPCS11FM completely lost its brightness after the installation of Windows 8. I tried the settings of brightness through the hardware buttons and in energy savings, but it remained the same. What should do? Karl

  Looking for a display updated sony driver.   Its always a good idea to do so during the updating of the OSs.

• Filtering only in a paragraph bold text

  Hello

  I don't know if this has been discussed before and if so, can someone point it to me?

  If this isn't the case, I'm changing all the "BOLD" text to the regular in a very large file, which also contains the regular formatted text. You can imagine that it can take a very long time. I was wondering if there is a way to filter only the characters in the formatted text, and then change them to regular instantly.

  Your help will be greatly appreciated and time are not going to lose!

  Thanks in advance!

  Use the buttons to the right to locate occurences change if you want to find, then, if you do not have.

  If you need to change a lot on consecutive pages, first select the range of text and change all the... but be careful and be prepared to cancel if you change too.

  use

• Autodial bold text is Times Roman, when the default is Helvetica.

  I hit just a huge explanation and this lost stupid text box.

  Question in title should be enough if you're an expert.

  I thought about it. I deleted "BOLD" body of the catalog and used the Character Designer to create a new body "BOLD" with the correct font.

• Format of individual pixels (After Effects CC 2014)

  Hi all

  How to create a format custom pixels for after effects CC 2014. I need a footing of 3.3, because it would help me to solve a technical problem I've had with map projection.

  I tried modifying the Interpretation Rules.txt file, which was hidden in the Users\Appdata\Roaming\Adobe\After Effects\13.1 folder. To remove the last # so I can at least see I can put in place a custom footing.

  But he does not appear in the drop-down menu when creating a model, or the interpretation of the images.

  I also made the same changes to the Interpretation Rules.txt file in the folder 2014\Plug-ins\en_US\ first PRO CC.

  And I restarted my PC after changes just in case Media Core only has not been updated itself properly.

  I see the Custom BY an outside Media Encoder export option. But not what I need. I need to be able to fix a rendering that was equal to the 3.3 without losing the pixel information, somewhat like an anamorphic workflow.

  Anyway, any help would be appreciated.

  Thank you!

  Evan

  Evan, I was able to create a custom rule in the Interpretation Rules.txt file in the After Effects preferences file, and it worked as I expected. Here's what I added to the file:

  flexible rule #; create a false rule that generates 3.3

  *, *, 99, *, * ~ 33/10 / "myRule, *, *, *, *, *"

  After you make this change and launch of After Effects, "myRule 3.3" is available as an option in the settings menu of Composition, interpret the film and other places provided BY.

  (Note that this rule will result in theoretically any file 99 FPS should be interpreted in 3.3 NOMINAL.) Given that is not a scenario running, probably not a problem, but if you feel uncomfortable in this topic, you could also just set all the other input to a lack of effective operation parameters. You don't want to leave all input parameters * because all the imported files would then be interpreted as BY 3.3.)

  You said you are trying to do something similar on your machine, what did you exactly in the interpretation rules file?