Paging PCL Postscript problem

Similar Questions

• PCL printing problem

  Hi guys/girls,

  Little help if you can.

  I have a Win Mobile program that prints a pocket on a wireless device, I just Laserjet P1120w new to test and I'm trying to print using the PCL commands, but it simply refuses, I can print to an Epson unit (and many other types) using Escape P sequences, but the HP device refuses to work.

  I defined some variables: -.

  pCodeINIT = Chr (27) & "%-12345X@PJL"& Chr (13) & Chr (10).

  pCodePCL = "ENTER LANGUAGE = PCL @PJL" & Chr (13) & Chr (10) "»

  pCodeRESET = Chr (27) & 'E '.

  pCodeEND = Chr (27) & "%-12345 X."

  Can I build a chain of sequence: -.

  message = pCodeINIT & pCodePCL & "This is some Text" & pCodeRESET & pCodeEND

  and send the message to the printer, the lights flash as it switches to PCL mode, but nothing is displayed.

  Anyone has any ideas to save my hair of all being withdrawn.

  Hi guys,.

  Thanks for both answers.

  Yes! at my expense, I just got off of the HP support line and you're both correct. No running on the P1102w PCL.

  They won't tell me where (or what are the magical incantations), to allow me to write a Raster driver for my Win Mobile devices, just looks like they lost out on a sale of 90 printers to another manufacturer.

  Thanks again guys for you help.

  ItWorks

• printing with non-postscript printer

  Can someone tell me how to get my graphic images to print without pixels on my printer Canon Pixma pro 9000 of Freehand MX?

  Thank you very much! It worked! So, I appreciate your help!

  I guess that's a postscript problem because my images are 300 dpi

• InDesign is pringing an incorrect image

  There are 3 designers who have the same problem among many others in the Department, each of them when you print a specific document from the same part of printer of the image is not printed correctly, it seems damaged or misaligned. When sending the image to another designer the document print perfectly. I reinstalled the printer drivers and paired the drivers used for the printer. I think it's a matter of adjustment, but I don't have the slightest idea what setting it would be.

  There are two documents. A bad positioning only part of the picture ever time it is printed in each of the 3 new designers, say, the page is 8/12 from 11 inches only 2 in the document the document prints correctly. B the document during a part of the image is rotating it shows normal but prints a white spot under an angle where the image was shot. Someone had a similar problem? Also, I know there is a workaround to export it to a .pdf file, but this is not an option for developers, unfortunately.

  I found a Post script printer driver # we use prints documents very well for the specific model.

  For this language PCL (Printer Control Language) drivers use the printer hardware to create some of the print data, usually graphic data such as filling boxes, highlights or fonts. This allows the computer treat the print fast and efficient job. The printer is then responsible to complete the creation and processing of the data on the page.

  PS (Post Script Language) it is widely used in the Macintosh platforms and to graphical applications in several platforms. Unlike PCL, Postscript is device independent. This means that the Postscript language creates all the print data and does not rely on the printer to print the data. This allow the compatible output when printing on more than one type of printer or the print device. Specifically, the graphical objects will be coherent and in some cases of better quality than PCL.

  As it seems that it is the answer to my question.

  http://www.laserquipt.com/support/IDX/0/063/article/PCL-vs-PostScript.html

• SAT PRO A60 memory upgrade

  is indicated by the documentation of edgetech corp, I bought a 1 GB PC 2100 DDR SO DIMM Toshiba OEM KTT3614 memory.
  After installation, the laptop does not start correctly showing a blue screen with the following message:

  page-fault-the-area non paged
  so the problem with the win32k.sys file
  the with the file ati2dvag.ddl

  then the following error IRQL not less or equal
  Start and shut down in a continuous sequence
  I have updated with the latest version of the BIOS, but the computer does not start correctly
  Need help
  Thank you
  My computer is a 01L00XFR SAT PROA60 PDA 65F with Windows XP pro

  [Edited by: admin]

  Hello

  The easiest way to see if the error occurs due to the memory card is to remove them and restart the unit. If the unit works properly without resend memory.

  I found what RAM modules are compatible with your device:
  256 MB (PA3311U - 1 M 25)
  512 MB (PA3312U - 1 M 51)
  1024MB (PA3313U-1M1G)

  All modules of this are tested with your laptop model and they should work fine.

  Good bye

• Error number: 0x800CCC0E in Windows Mail on the attempt to send email following October 2013 automatic Windows update

  Immediately following October 10, 2013 Windows Vista update automated - 25 updates is installed on my Toshiba Satellite laptop and HP Pavilion Desktop - cannot send emails from a computer using Windows Mail - they return both the same error message: "failed to connect to server...". "Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E".  E-mail can still receive however on both machines.  There is no problem whether the sending of emails minutes before the update took place.  Anyone who has known (and solved) this problem?

  Postscript: problem solved - on both my laptop and desktop, I discovered that under Windows Mail > tools > accounts > (my tiscali account) > properties > servers, the entry for the outgoing (SMTP) mail has been entered incorrectly as smpt.tiscali.co.uk.  This change of smtp.tiscali.co.uk solved the problem on both machines.

  Windows Mail worked perfectly on both machines immediately before Windows update Oct 10 - so it seems that the update must have corrupted a file to install Windows Mail on my two computers.  Not sure how other users may be affected by this...

  Perhaps Microsoft could take a look?

• My swap file corrupts always after reboot. How can I remedy this?

  I have Windows 7 Ultimate 64 - bit Edition with Service Pack 1, all the updates that are installed. For some strange reason, my pagefile always corrupts after restarting the computer and when I start Windows I always get Symptoms "low virtual memory". When I go to system preferences > advanced > Performance, the size of total paging for all readers file is empty and when I opened to change virtual memory settings, no paging file is enabled for my drive.

  I tried to boot into the recovery environment, unlocked my Bitlocker drive using my recovery key and by using the following commands:

  attrib - r - a s h c:\pagefile.sys

  del c:\pagefile.sys

  I also made sure using regedit in recovery mode there is no TempPageFiles value.

  System Restore is disabled, and I don't want to do a complete reinstall.

  I was able to boot into Windows without any problems whatsoever, but this only provides temporary relief from the problem. I have not anything with the installed AFS driver, so if someone could help me to get permanent relief from virtual memory issues, that would be greatly appreciated.

  Dear Jan:

  Thank you very much for your answer. However, the display on the AFS driver that you can join in the links in the post you want to go to is not relevant to my situation. However, I found a post online via the Google search engine not great and wonderful in which only you have to do to the deactivation of the attributes on the pagefile.sys file, but you must also make a few changes to the permissions of this file too. When I restarted the computer after that I left the repair mode and I allowed my computer to start, and recreate the paging file, the problem seems to have disappeared as I have not experienced the symptoms of lack of memory. I also disabled pagefile encryption on my volume of operating system that I didn't need it because I use Bitlocker. It could have been a screw-up permissions when I tried to do something or the encryption of redundant and useless file on my computer supposedly corrupted the pagefile that she tried to develop and foster growth.

  Therefore, the problem seems to be resolved, and I wish you a wonderful day.

  Sincerely,

  Nathan Koepke

• Editing a catalog workflow process.

  I just started a new job which involves the creation of a catalogue of annual supplies "Church."  My predecessor was doing this work for over 25 years, since the time of the film and Xacto knives.  She had switched to use computers, of course, but I think that its process could be simplified a bit using InDesign.  Most of his work was done with Quark, but now that Adobe has improved the InDesign that has now become the industry standard for the layout and to production printing.

  I'm just need help, to find the most efficient way to take its process and make mine without causing too much confusion.  My supervisor said that she usually does stuff catalog from March until September.  I think the project is great, yes - but not as big.

  Now for some information about the project.  This catalog is a catalog of Church supplies.  What we do is sell us pages to different vendors and they send us their work/product images/Cup etc. and we connect and format pages look consistent and apply to our page templates.  The way he did in the past what she would do was to create a quark for EACH PAGE and then update the price/images/fonts/etc while it intended to apply the model to the correct section of the catalog.  We had a total of 14 'sections' catalogue 2012.  This, of course, was a long and tedious process.  I can't use many features to automate InDesign because of the nature of the catalogue, or at least I didn't they would make things much more efficient.  We have everything from Bibles to chairs and tables in this catalogue, which is what makes it so difficult to automate. With each product, we have a label, a UPC or ISBN and price.

  Due to the volume of pages (out of 210) and the amount of images on each page, it concluded that the easiest way was to create an individual file for each page.  I wonder if someone can find a solution (via the Palace books) that might make this process a little less time.  When we send pages to the printer, you must organize into "signatures" or sections of pages.  The best solution I could come up with my limited knowledge of InDesign to use the Palace of the book and create a separate file for each signature to keep paging.  The problem is that each signature is 30 pages and with all images and text, it will most likely run really slow and cause problems.

  Another question, I don't know how to solve it as efficiently as possible is how easily apply the template with the correct header and subheader in signatures.  Right now, I have a "master file" created with each Board master (each section has a different color) and I intend to help that somehow (?) just creating content and implementing the right master page for each of them.

  I know that there is a lot of information, but thanks in advance to those who can make sense of it and give me advice.  If you need more information let me know!

  Thank you!

  When you say that "you have not found a way to use ID's of the automation features" I kind of laugh / am confused. I bet that a lot of things could really help, but the key will be to have a format that is conducive to their use, and I bet that 200 documents 1-pages is not one of them. ;-)  Organization of your documents and data is really essential to make any Automation runs smoothly.

  I tried to find an encouraging, non-ablette to say. SMG did a better job than I could, by far. The work above automation features pretty well when the data source is uniform and perfectly clean. You do not have that, I think. How to get new data from suppliers for you? If they were all downloading their Cup and their descriptions in plain text of their products and their new prices in a database, or even em entered a large Excel worksheet, then automation tools can be very useful.

  When we send pages to the printer, you must organize into "signatures" or sections of pages.

  ... why? You have a page-limit-by-signature? Speak honestly here: you have the freedom to choose a new printer? In 2011, I expect to export a single PDF of my catalog of hundreds of pages and to transmit to my printer, and they would do this kind of work.

  Another question, I don't know how to solve it as efficiently as possible is how easily apply the template with the correct header and subheader in signatures.  Right now, I have a "master file" created with each Board master (each section has a different color) and I intend to help that somehow (?) just creating content and implementing the right master page for each of them.

  It looks a bit like the thought of Quark for me, honestly. I have a master page for each generic schema to images or anything else that does not at all from one page to the other change. Headers and secondary headers would living on pages, so that they could move with the text when we added 20 new products at the beginning of the catalogue in 2013.

  The best thing I can think is here for me to give you a file that is already set up in a way that makes sense for a simple annual review of lots of whimsical text. I would send you one right away, but unfortunately I can not think that I can share without violating any number of NDAs, but I will root in my archives tonight to see if I can't find a document part-measure of this kind.

• I have 8 GB of RAM, but I am having major problems with my pc. Error message when I could actually run diagnostics said system is excessive paging. Help, please.

  Have also run the Windows memory diagnostic tool, but system says there is no problem. Have tried everything. Startup Repair is also no problems but there obviously, it is because although the Office seems normal when you can actually get for her, he is immediately frozen and I can't access anything whatsoever files, internet, e-mail. Fortunately, also a laptop so I tried to find help!

  Hello

  • What is the brand and model of your computer?

  There are several reasons why you may experience excessive paging.  If you do not have enough RAM to run Vista and all additional progtams, then your computer is using your hard drive as additional or virtual memory. Thus, when the system uses the hard disk as memory, excessive paging that is more.  It is therefore possible, you need to add more RAM to your computer.  If you have less than 2 GB of RAM, you can consider adding more.

  Another reason why this might happen is if your computer is infected with a virus that uses system resources.  So to run a full virus, malware, spyware, trojan, scan your computer to make sure that it's clean.

  Microsoft Security scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  These articles will explain what is virtual memory, how much your computer is currently using and how to change or adjust the amount of virtual memory available on your computer.

  What is virtual memory?
  http://windowshelp.Microsoft.com/Windows/en-us/help/fd3e9104-1076-4600-9F9D-8739849387ec1033.mspx

  Discover how memory is using your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/6e566289-20FA-4ED4-BDDF-0b36a77b003c1033.mspx

  Change the size of virtual memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/89ca317f-649D-40A6-8934-e5707ee5c4b81033.mspx

  Prevention of problems of memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/34955e8d-9e3b-4f68-8e7d-773c167c61e21033.mspx

• Problem with Excessive paging

  When I run the reliability and performance minitor I saw this WARNING: theee system knows an excessive paging. Hmm, what do I do... need help to help my loptop drip slowly...

  Hello ana03,

  There are several reasons why you may be familiar with an excessive paging. If you do not have enough RAM to run Vista as well as additional programs, then your computer uses your extra hard drive as virtual memory.  Thus, when the system uses the hard disk as memory, excessive paging that is more. The hard drive, constituted in memory is much slower then the physical RAM on your system. It is therefore possible, you need to add more RAM to your computer. If you have less than 2 GB of RAM, you might want to consider adding more to your Windows Vista to run smoothly. RAM is the most easy/less expensive way to improve the performance of your system. Also please see below for your system can also be infected by something:
  

  Try to start your system in safe mode:

  Restart your computer if it is running. Press the F8 key after your computer powers initially. Once you see the menu Advanced Boot Options, you can stop tapping. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan is done remove anything it finds. Simply restart your PC to see if your problem has been resolved! Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Start / Paging file / TEMP / Drive problem fusion (listen to me)

  Hi everyone, expensive computer scholars.
  I am once again an urgent need of your help and knowledge.
  Get straight to the point, I have a newly purchased Lenovo with Windows 7 x 64 on this computer. I bought it in China.
  When I bought it, I noticed that he had four drives of 250 GB of space for each, so I decided to merge them using one of these programs, I think it was the partition Wizard.

  I merged the so: C and D in C and E and F in D
  Now he was never the same, as if one could say that the Fire Nation attacked.
  Sometimes, I would get a blue start-up screen, even if it does not disappear with a reboot. I can't update Windows, which is more annoying, but could be due to the fact that the computer has a Windows English with a Chinese BIOS on this matter, I do not know (I digress from the topic here, but BTW if this is also something, I can't update my BIOS, even from lenovo page)
  But it's the biggest problem I have this message that occur whenever I have start and open my session.

  "Windows will create a temporary swap file on your computer because of a problem that occurred with your paging file configuration when you started your computer. File size of total paging for all disk drives may be a little larger than the size you specified.

  I know it's a pretty classic, or classic problem, but I've never seen such results. And I went through a few forums, without answers. As a result, I can't install anything, really, I have an antivirus at the moment and that makes me nervous. Also, I can't create a hotspot for daughter mah, so, you know, it's basically *.
  Oh dear users, please help! I would be happy to send you a form you need and follow all your instructions to the letter.

  Thanks for reading and good luck. On the contrary, this computer is very important to me, I need to work, and now that I bought it, I'm broke.
  In any case, thanks for reading and thanks for the responses.

  Hello

  We are here to help.

  It seems that your virtual memory settings are lower than usual. Virtual memory is a combination of RAM and disk space that is used during the process execution. To change the virtual memory settings, please follow the steps below:

  1. Log in as administrator
  2. Open virtual memory settings by clicking the Start button
  3. Click on Control Panel
  4. Click on system and Maintenance
  5. Click system of
     
  6. Click on Properties
  7. Click Advanced system settings
     
  8. Click the Advanced tab
  9. Under performance, click settings
  10. Click the Advanced tab
  11. In accordance with article virtual memory , click the change button
  12. Uncheck the automatically manages the size of pagefile for all drives checkbox.
  13. And then, click System managed size if you want that your system will be one that will put the necessary memory.
  14. Otherwise, you can put on your own by choosing Customize size and enter the initial size and maximum size.
  15. Click OK

  Let us know how it goes.

• Virtual memory warning reset itself - problem of paging file No.

  Hello

  Since my upgrade from Vista to Windows 7. .everytime I restart my computer, maintains memory virtual reset itself. It keeps the switch back to "No paging file" and the "exécution Options" window keeps popping up when I restart my com.

  I tried value "Automatically manages the size of pagefile for all readers" and even "system managed size" and "custom size." When I try to reopen the window, it gives me this pop up:

  "Windows will create a temporary swap file on your computer because of a problem that occurred with your paging file configuration when you started your computer. File size of total paging for all disk drives may be a little larger than the size you specified.

  I tried to delete reg entry and see if it will fix itself... no agreement.   I have 3 GB of RAM...

  Help, please!

  Disabling AFS.sys (sc config start = disabled afs) has toured my situation when I had this problem (see http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/c5cfe9d0-e3d8-4625-85b1-3efdf04cd1a0 for full details).

  Arrive at an elevated command prompt (Démarrer\Tous Programs\Accessories - right-click on command prompt and select "Run as Administrator") and type the command above (sc config start = disabled afs).  Press enter and you will get a confirmation message that the Setup is complete.  Reboot and you should be able to put your swap file.

  Don't know why this happens, but starting from the thread that above, it appears that AFS.sys really did a lot for you, and my Win7 upgrade system works well without any problem in this configuration.

  I hope this helps.

• ViewObject range Paging performance problem

  Hi all

  I am facing a performance problem with the implementation of an obligation to programmatically add a number of extra where the parameters of the clause (using bind) variable in combination with range paging.

  My code looks like this

  ...
  
  ApplicationModule am = Configuration.createRootApplicationModule("services.DossierAM", "DossierAMLocal");
  ViewObject vo = am.findViewObject("DossierListView");
  
  // apply programmatic view criteria
  ViewCriteria vc = vo.createViewCriteria();
  ViewCriteriaRow vcr = vc.createViewCriteriaRow();
  vcr.setAttribute("Reference", "15/%");
  vc.addElement(vcr);
  vo.applyViewCriteria(vc, true);
  
  
  // enable range paging
  vo.setAccessMode(RowSet.RANGE_PAGING);
  vo.setIterMode(RowIterator.ITER_MODE_LAST_PAGE_PARTIAL);
  vo.setRangeSize(50);
  vo.scrollToRangePage(5); // Cause a java.sql.SQLException: Parameter IN or OUT missing for index.....debugging learned that the :vc_temp_1 bind variable is not filled
  // vo.scrollToRange(250); // Cause a java.sql.SQLException: Parameter IN or OUT missing for index.....debugging learned that the :vc_temp_1 bind variable is not filled
  
  ... 
    ...
  

  I found 2 solutions, but they both require an application of additional database that is, performance wise, is not acceptable.

  The first solution is to slip into an additional call to exectueQuery() before the call to function scrollToRangePage (int) or scrollToRange (int).

  The second solution is to use the method (int) setRangeStart instead of variants scrollToRange (Page). This method performs also 2 database calls.

  My question to you:

  Is there another way to satisfy the requirement of programming add a certain number of parameters of the additional where clause (using the variable binding) in combination with the pagination of the range without the need to perform queries of database 2?

  The code is tested with JDeveloper, 11.1.2.4.0, and 12.1.3.0.0 and behaves the same on both versions.

  Kind regards

  Steven.

  Have you tried to create truly VC with bind variable (rather than use binding implied var created by frame)?

  Something like: http://www.jobinesh.com/2010/10/creating-view-criteria-having-bind.html

  Dario

• Problem with the Paging in VO tuning range

  Hi all
  
  I am having some problems with the Range Paging in VO tuning. My VO questions about 5000 + lines. So I'm going to the range of paging that is the recommended method for managing large data. Here I must also get the current row of the table (which shows the desired result). But when I use the getCurrentRow() method, it results in a value zero. Why this happens?
  
  code
  FacesContext fc = FacesContext.getCurrentInstance ();
  Object returnObject1 = null, fc.getELContext () .getELResolver () .getValue (fc.getELContext (), "links");
  DCBindingContainer bindingsIte = returnObject1 (DCBindingContainer);
  DCIteratorBinding dciter = bindingsIte.findIteratorBinding("ClientsVO1Iterator");
  Line rowClient = dciter.getCurrentRow ();
  String sDisposaltype = rowClient.getAttribute("DividendDispType").toString ();
  
  This method works very well with the scrollable access mode.
  Is there a special way to get the current line with the range Paging?
  
  Thank you
  Danesh

  Danesh,

  I have not checked this version or the most recent 11.1.2.1, but in 11.1.1.4, we had this problem and we use workaround:
  1. remove the current selectionlistener in the table (#{... makecurrent}).
  2. set a new headset selection (using the small arrow to the right) in a bean of your choice. The scope of the bean must be seen or pageflow depending on where you need access to the selected line.
  3. in the new selectionListener you get the selected line of the event, get the key in the line and store in an attribute of bean
  4. to the point you need the selected line, you use the stored line button and work with that. If you need attributes from the line you must ask for the line, once again, that you only the key. In our case only pass us the key to a service in the module of the application method, so this works very well for us.

  Here is an example of such a selection listener

      public void singleSelectionListener(SelectionEvent selectionEvent)
      {
          RowKeySet rksAdd = selectionEvent.getAddedSet();
          if (rksAdd.isEmpty())
              return;  // no selection
  
          Object[] it = rksAdd.toArray();
          // as this is for single selection there should only be one, but...
          for (Object obj: (List) it[0])
          {
              mLogger.fine("Selected :" + obj);  // log selected row
              Key k = (Key) obj;   // the object is the row key
              Object[] kv = k.getKeyValues();  // get the key value for later
              // strore the key value in a bean attribute
              mLastSelectedOID = (Integer) kv[0]; // store the key value (if the key has multiple parts you need to store them all)
          }
      }
  

  Timo

• PostScript stack overflow problem

  Hello world

  I am looking for detailed information one

  postsript battery works, what commands are implemented

  on the stack and how you can control the size of the stack

  When creating postscript files. We write a postscript

  driver and our PostScript shows often stack overflow

  Mistakes, but did not find us sufficient information on

  How to avoid this problem nor books ps.

  A stack size is dependent on a particular PS interpreter

  or are there standards? What is a typical stack size?

  What is the best way for the developer to the size of the battery, follow

  so it does not get overwhelmed?

  Thank you very much in advance for any help.

  Yuliana

  I had a look at your sample file. My impression is that these huge blocks of

  PS code of procedures is not quite adequate. Provided the printers that you want to use

  level 3 printers and have enough memory or - even better - a hard

  disk, I suggest using the filter ReusableStreamDecode place such as outlined below:

  To set up:

  CurrentFile <0 (%endofchunk)="">> > ReusableStreamDecode filter

  Insert here the % your huge chunk of code PS

  % EndOfChunk

  /name_of_chunk exch def

  To use:

  name_of_chunk dup resetfile cvx exec

  Of course, like Dov post earlier, the details of storage management are highly

  dependent development implemented, but I think reusable data flow data are probably

  managed outside the memory 'normal' namagement, e.g. saed on a hard drive,

  If present, or a virtual or similar disc.