Boolean front panel disconnected from the block diagram

Similar Questions

• Deleting the definition of Type casuses control a lot of misreferences and program in the block diagram errors

  In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.

  Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc..  This side effect is much more errors, broken links and misreferences than expected otherwise.

  How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?

  
  

• How can I activate on labels in the block diagram, but not on the front panel?

  This question may have been asked before, but searching the Forum did not.

  In LabVIEW 2010, I have 16 indicators of chain on the front panel. I can't have the label for each Visible on the front panel, so I turned it off. But in the block diagram, I need distinguqish one of the other, so I need to make the label (name) visible.

  In the block diagram, if I select indicators Sting all together and go to properties and make the label visible, it makes visible labels on the front but not visible in the block diagram. What good is that?

  How the help of labels (name) of the indicators String visible in the block diagram, but not visible on the front?

  dbaechtel wrote:

  This question may have been asked before, but searching the Forum did not.

  Don't remember already asked this question and get help in this thread?

  Have you tried the things I said in that thread?  How did they not work?

  Right-click on the terminal of BD and make visible > labels.

  It probably will be the FP control show its label as well.  Then go to the FP control, right-click and go to Visible > labels and uncheck the box.

  The terminal of the comics will have a label, and control of the FP will not.

• Double-click the object of front panel to find the terminal block diagram

  Hello world. I don't know why, if I double click on an object to front panel, labview opens the front tab customize, instead of finding control in block diagrams, which would be the normal behavior, as I read in http://labviewwiki.org/Tips_and_tricks#Debugging.

  I tried to reset the initial Setup by renaming the file LabVIEW.ini, but it doesn't seem to work.

  Do you know how double-click the object on the front panel and locate the?

  Thanks in advance!

  Guille.

  Did you restart LabVIEW after you rename the file labview.ini?

  There is an option (Tools... options...... general façade... 'Open the editor control with double click').

  It always seems to be set in your case.

• Third-party tool to draw the rectangle on the block diagram

  I know he was once a third party tool that allowed me to draw a rectangle of Nice double border on the block diagram.  Yes, it's the not the front panel block diagram.  It was very useful to make annotations and designating functional groups.  Does anyone know what this could be?  I installed Package VI Manager and went through everything I can think of without finding her.

  Unfortunately, the documentation for those modules potentially very useful is poor.  The 'Get info' is terse point of unnecessary and by clicking on "Product Home Page" rarely gets you more than a logo, not informative.  Surely there should be more details somewhere.

  I don't know what you're referring to the tool. What is this logo? Maybe someone can recognize.

  What is the problem with the flat frame?

• How to find the position of the VI icon currently run on the block diagram of the appellant

  Dear forum,

  I am currently trying to use a LabVIEV VI as a simple sequencer: several (very slow) actions must run one after the other. Each action is represented by a Sub - VI, some actions are executed several times. My task is to view the Subvi somehow executing.

  My first intention (just manipulate the icon of the VI running with 'Icon.Get VI as Image data' / 'Icon.Set VI of Image data' invoke nodes) has failed, because it changes all instances of the VI icon. If you use the same VI several times, all these VI icons are changed (see here: http://forums.ni.com/t5/LabVIEW/How-to-change-animate-icon-of-currently-running-VI/m-p/3120754/highl... )

  My current approach is to use an image of the block diagram (with "VI: block diagram: get resized Image ' call method) in a picture of the front panel control and working within this control. But for this I need to know the position of the icon of the VI running. I know that I can assess the limits and Position via the properties GObj, but how to find the VI running (note that a VI can be installed several times on the block diagram, so the name of the VI is not unique)? IMHO the easiest way might be if a VI might find its icon on the block of the appellant diagram itself when it is run...

  It is clear that this position is not yet the position on the photo, but this conversion is a small piece of work...

  Kind regards

  cpschnuffel

  
  

• How to generate color on the block diagram box?

  v: * {behavior:url(#default#VML) ;} O'Bryan: * {behavior:url(#default#VML) ;} w\: * {behavior:url(#default#VML) ;} .shape {behavior:url(#default#VML) ;}}}} Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  I found the code snippet below into an example, but I can't recreate the color box on the block diagram using LV 8.6.  I can generate a color of the front box and then change to a constant on the block diagram, but I wouldn't be able to insert a color area directly from one of the palettes on the block diagram?

  Thanks in advance.

  

  jjgors wrote:
  The color box constant is in the palette "graphics and sound-> photo functions.

  and much more...

  

• Tecra A2 crashes when you are disconnected from the internet

  We have a customer with a Tecra A2 provided by ourselves that, after 5 months without a problem from time to time, hangs when it is disconnected from the internet.
  Reboot the laptop and the internet can be found sometimes up to 20 times and then it blocks again when we disconnect from the internet IE. A Ref post causing VOIP problems were found and the software disabled and disconnected hardware. No difference. Running XP SP2, IE6, Kaspersky Anti Virus, Tiscali ISP ADSL, modem ADSL Tiscal (a new requested just in case). A lot of work to do and lose valuable time with customer problem.
  Thank you

  Hello

  It seems that a 3rd party software causes this very strange problem.
  You suggested that VOIP is causing the problem. Well, the problem is that Toshiba doesn't support any 3rd party software and applications.
  What I can suggest is to check the Event Viewer logs. You will find all the errors that appear on the OS. Double-click the error and you should see the description of Microsoft.
  Maybe you will find a solution.

  Good luck

• Why the block diagram is disabled?

  What do I do now?  Please, look at the attached picture.  A VI that I use as a Subvi in various different programs suddenly started looking like I had used the application builder to create an exe out of it (but I don't have!).  The only options are Start and run continuously, and the block diagram is disabled.  What I did to get into this mess?  How to cancel everything that I did, so I can edit the schema-block again?  For any help or suggestion would be greatly appreciated.

  Thank you!

  You have somehow managed to record without a block.

  Go back to the last working back up and start from there.  You have backups, right?

  Lynn

• Remote debugging active but no access to the block diagram

  I have an executable running on a target that I want to debug. I enabled debugging in the build properties, I enabled debugging in vi properties. I can connect from the development computer to the exe.

  But the option to switch to the block diagram is simply not there (see photo). I know I am a first not who has this problem but I couldn't find an answer.

  Without being able to see the block diagram, a 'debug function' is totally useless!

  If anyone has an idea it would be greatly appreciated. Thank you

  

  Hi peter,.

  It is a known problem and a request for Corrective Action (130070 CARS) was created and reported to the Department R & D. looking at through the notes in the CAR, he must fix it in LabVIEW 2012.

  Workaround solution:

  Debugging applications with menus on bar

• 2 orders of façade with a control on the block diagram

  Hi all

  Is it possible to use 2 controls on the Panel before which order the same control on the block diagram?

  In order to have a sort of parallel control.

  Thank you in advance.

  Here is a recent example.

• How can I change the scrolling on the block diagram?

  I'm trying to find a way to scroll from left to right with the mouse when you program in the block diagram.  I found that if I hold down the Ctrl key and scroll with the wheel of the mouse while on a case statement, it will travel cases.  With no pressure on the buttons from scrolling with the mouse wheel will allow me to scroll vertically, but how to scroll horizontally?  Thanks for the help.

  If there is then I do not know it.  I have a mouse with a scroll wheel that clicks on the left and right, but it does not work in LabVIEW.

  I just found out that if you hold down the ctrl and shift keys and click and drag on an empty spot you can drag the diagram block autour.  Which is somewhat scrollin

• This family member is able to make me become disconnected from the internet.

  Windows IP configuration
  Windows XP / Home Edition / 2002 Version / Service Pack 3

  A member of the family interferes with my computer and worse me. It's work! This family member is able to make me become disconnected from the internet.  I'm not sure how he does it, but I have a feeling that he is able to see my IP address and it blocks my IP address of the router. I'm not familiar with TCP/IP or DNS settings. Here are some of my settings, perhaps you can direct me in how to change a parameter, so it can stop.

  Windows IP configuration
  Host name...............................................
  Primary Dns suffix...
  Node Type................................................ Unknown
  The active IP routing... NO.
  Active proxy WINS... NO.
  DNS suffix search list...
  Ethernet wireless network connection card:
  The connection-specific DNS suffix.
  Description............................................................
  developments
  Physical address...
  Dhcp Enabled.................................................... Yes
  Autoconfiguration enabled... Yes
  IP Address..........................................................
  Subnet Mask......................................................
  Default gateway...
  DHCP Server......................................................
  DNS Servers......................................................
  ......................................................
  Whether by TCP/IP or DNS, I believe that the family member is accessing my computer. Is it possible to change these settings where the family member is not able to see my local IP address? I need to change the DNS server settings and change TCP/IP settings. Maybe I'm wrong and you can tell me what I should do to fix this problem. Thanks in advance for your answer.

  As already mentioned LEM that the rule on the router has an absolute rule that can and cannot access the internet or other network resources.  I suggest you lock your computer, turn off the server, Remote Service registry service and Remote Desktop and change the password on all administrator accounts.  Make sure that your firewall is enabled and have it block all inbound traffic local.  Then talk to the guy that controls the router and ask him to lock the router with a password, the only way to bypass the router, then will be by resetting it and the router administrator will know if everything else does.

  Having said that your problems are probably not caused by another Member of the family, it could be caused by flaky or failing hardware, bad cable, bad router, network card bad, if you really think that your problem is caused by a member of the family of your computer, then your question must be addressed and brought to a head in a "family meeting" rather than in a public forum on the internet.  There is not a lot of people read here can do to change the behavior of the members of your family.

  John

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot access Windows Store. Error: App not available, either you have been disconnected from the Internet Server or access problem

  I recently bought a new vaio with touchscreen and win 8. the ' store became available? I clicked on the app and get this message: App not available, either you have been disconnected from the server or access to Internet number... something... not that is the case... .laptop is old 2 days... and I tried to put it in place... it's very frustrating... and I am hating victory 8 technology now...

  Original title: not like winning 8 all the

  Hi GESH78,

  -You are able to access the Internet outside of Windows Store?

  This issue may be caused if you are using the proxy settings, incorrect settings or store waiting for update needs to be installed on your computer. I would suggest trying the following steps and check if it helps.

  Step 1:

  Install all pending Windows updates and check if it makes a difference.

  To check updates

  one) open Windows Update in Control Panel by dragging it from the right edge of the screen, type Search (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), get into Windows Update in the search box, by typing or clicking on settings and then type or by clicking install optional updates.

  (b) in the left pane, press or click find updates, and then wait while Windows searches the latest updates for your PC.

  (c) if updates are found, tap or click install updates.

  Read and accept the terms of the license and then press or click Finish if the update requires it. You may be prompted for an administrator password or to confirm your choice.

  Step 2:

  I suggest you delete the Windows Store cache and check how it works.

  (a) press Windows + R logo

  (b) type wsreset.exe in the run window, and then press ENTER.

  Step 3:

  Disable the proxy connection

  If you use a Proxy connection, then try to disable the proxy connection and check.

  Follow the steps to turn off the proxy connection.

  (a) click on the gear box in the upper right corner in internet explore.

  (b) click on the Tools button and then click on Internet Options.

  (c) click on the Connections tab, then click LAN settings.

  (d) uncheck the use a proxy server for your LAN check box.

  (e) click ok.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.