boot disk for the Vista cd

Similar Questions

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to create an ERD for the vista sp2 x 64?

  How to create an ERD for the vista sp2 x 64?

  How to create an ERD for the vista sp2 x 64?

  If you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  Make sure you get the 64 bit version.

  See you soon. Mick Murphy - Microsoft partner

• Need a boot disk for Satellite 320CDT

  I need a boot disk for this machine - W98 or W2000. No information about the download location would be useful.

  Thank you

  Hello

  bootdisks are available at www.bootdisk.info

  W95 until images of Windows XP Home edition boot floppies!

  Campino

• Find the product number for the vista on the computer operating system?

  Find the product number for the vista on the computer operating system? I want to upgrade to Windows 7 and do not habve the product number

  OT:

  RPF Vista product number

  IF you need to find your retail business (NOT OEM preinstalled HP, Acer, etc..) Product key Vista, use these programs.

  No product key you will find for OS OEM preinstalled by this method is only used at the factory for multiple installations and of no use to you.

  http://www.Belarc.com/free_download.html

  https://www.magicaljellybean.com/KeyFinder/

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  If you need to reinstall your Vista preinstalled, use this product key.

  The COA sticker is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  See you soon.

• Where can I find the clock digital multi AGS for the vista sidebar?

  I recently had to smoothing on my computer and do a vista reload fee.  now, I'm trying to find the clock digital multi AGS (the most useful for the windows vista sidebar gadget was by far, in my humble OPINION).  Where can I find the clock digital multi AGS for the vista sidebar since microsoft went down the gadget site?

  Thank you

  Hello
   
  As the gadget site is down you can't find the clock digital multi AGS for the vista sidebar.

  You can check the link for help:

  http://Windows.Microsoft.com/en-us/Windows/downloads/personalize/gadgets
   

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• Is it possible to get physical disks for the version the creative cloud Lab?

  Is it possible to get physical disks for the Lab (lab license) of the creative cloud version? Download times to download most of the following CC are crazy. Physical disks would be useful.

  It is possible to obtain copies of DVD of installers of regions with poor communications infrastructure. Please contact your Account Manager, dealer or contact Customer Care - Adobe Support

• Have the disk for the Acrobat Pro disc. Installed, but only the trial opens

  Have the disk for the Acrobat Pro disc. Installed, but only the trial opens

  Hi clanhansen,

  Please enter the serial number purchased in the trial version to activate the software.

  To find the serial number, please visit: http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  Kind regards

  Rave

• ESXi is unable to install 'his place on the disk for the dump data' no ideas?

  It is an older server.

  Data sheet:

  GOING Linux 2200 series

  Intel P3 700 MHz x 2

  768 MB OF RAM

  9.1 GB SCSI x 3 (configured in RAID 5 now)

  I have attached a picture of the error message that is received and typed most of the message below.

  NOT_IMPLEMENTED /build/mts/release/bora-123629/bora/vmkernel/sched/sched.c:5075

  Frame 0x1402ce0 ip = 0x62b084 cr2 = cr3 = 0 x 0 = ox3000 cr4 = 0 x 20

  are is 0xffffffff ds is 0xffffffff fs = 0xffffffff gs = 0xffffffff

  EAX = 0xffffffff = 0xffffffff = 0xffffffff edx ecx ebx = 0xffffffff

  = 0x1402e3c = 0xffffffff edi esi EBP = 0xffffffff err =-1 eflags = 0xffffffff

  * 0:0 / & lt; NULL & gt;  1:0 / & lt; NULL & gt;

  0x1402e3c: battery: 0x830c3f, 0x1402e58, 0x1402e78

  VMK availability: 0:00:00:00.026 TSC: 222483259709

  No space on disk for the dump data

  Waiting for debugger... (World 0)

  Debugger is listening on the serial port...

  Press ESC to enter the local debugger

  This could be a simple problem or not, I'm not sure. I spent several hours already trying to reconfigure the readers to try to get the installation to recognize.

  Any help is greatly appreciated.

  I agree with Matt, the material can be simply too old-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• my brother baught a laptop with vista 64-bit of a pawn shop and I'm trying to fix it, but I have no disk for the laptop.

  I need to find a way to fix this laptop. Cousin of my brothers ex-wife tried to hack some time ago and it was running ok but I tried to restore it so that it works correctly. Things worked but not everthing was working the right way and I tried to save what was already on the laptop like music and images. Some problems that the laptop has been seen before I tried using System Restore where would keep for lack of things like the internet even if from time to time that would work very well from time to time. After restoration of the system using the computer has a problem major now \Windows\System32\drivers\partmgr.sys is a problem 0xc0000221 status whatever that means. someone please help. I can't afford to go buy a new drive for 64 bit vista to repair it work with right now.

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Bootvis. Optimizer my boot files, xp home pc ed didn't get fucked on the disk for the faster system boot

  Can HI: Someone help me. I downloaded bootvis. twice on my pc; think the first download may not be fully complete etc, but I am facing the same problem. After running the program, my pc revealed part perfectly fine graphics that is the part of the track, but when, after the reboot, I click on trace and select optimize system for faster boot times etc, the faded window displays, saying: it performs the optimization, but it should be another window reappear after the first whose content is supposed to be readable, this 2nd window never comes to the top, even after waiting for 2 hours and no signal from the program he's finished optimization etc.. My pc seems to be idle all the time. (like I see on the screen of the Task Manager, tab)  What can I do to correct the situation?

  My 2nd problem is that my system starts almost near quickly enough for me to sign, but after the signing, it takes a while 2-3 minutes for it to load all programs, so that it can show desktop ICONs, for me to be able to use the pc.  It's pretty frustrating for me.  Can someone help me please what to do to speed up this piece too.
  NM

  Well Boot_Vis utility is a "start value" program only, share charts, her will not

  be involved... Open the utility, all boxes should be checked unless the "use of the disk,"

  go to the tab "trace", select "optimize system", the pc automatically reboots. Back to xp, just leave

  alone and wait for the utility to start up on its own...

  Also, microsoft has dropped the utility soon after xp was public, the utility probably

  problems due to the... In regards to starting, try the recovery console, type: FixBoot approved, type:

  CHKDSK C: /p after his execution, type: EXIT

  This should fix startup problems.

• where can I buy a boot disk for vista 64 ultimate

  Windows had installed an automatic update disabled my norton 360 and advocate changing the load settings for my Windows Administrator profile cuasing to run a profile of temporary market and I run the system restore, tried to pull the files from the profile administraor to a new user profile, that I put up as an administrator and im still could not get the ducuments the main profile im unable to connect.  Microsoft offers no recovery disc for vista 64 ultimate and advised me to purchase the full retail version to reload Vista, which is ludacris. I have windows 7 and 8 on other machines, but I'm not able to create a drive recovery vista ultimate 64 and ive lost my original CD copy that I have buaght years.  all they're going to do for me is to try to convince me to pay for their customer support which I didn't need. I need a startup disk for vista 64 ultimate

  Thank you

  Hello

  What to do when a Temp profile is loaded;

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  See you soon.

• I need a boot disk for Portege 3480CT

  Hi, I have a free partition on my hard drive and I need to perform the installation of win98se on that, but my cdrom will not work in the BACK,
  so I driving to use the TRO0000001b95.zip startup disk, but it's only for recovery!
  and I need need to have the avileble a:
  Can ware I get a boot disk appropriate?
  alorsx.

  Post edited by: master af

  Hello
  Yes, is there someone can help me?
  After all, I'm in the Toshiba Support Forum!
  so if I can't have the DISKETTE of STARTING good, maybe I can get other advice how can I get my CD-ROM to run under DOS?
  alorsx.

• Not enough space on disk for the Partition: Windows Bootcamp

  iMac (retina 4K, 21.5 inches, end of 2015)

  Processor: Intel Core i5 to 3.1 GHz

  Memory: 6 GB 1867 MHz DDR3

  Graphics card: Intel Pro Iris Graphics 6200 1536 MB

  The OSX Version: 10.11.4

  I tried to download windows for my iMac. I bought the full version via USB for it. I followed these instructions: create an ISO image for Windows - Apple Support installation media Boot Camp to create my own ISO image. I did, and I ejected from disk image Windows "10" as he told me too.

  When I go to download the support software and partition it, he will get after downloading the Windows Support software, then to halfway in partition the drive, it will say "disk does not of enough space to be partitioned. (PS) The "BOOTCAMP" image will appear on the desktop until it says the message and then will disappear and the message will occur.

  I fixed the disc and it defragmented. It's a lot I put 300 concerts for the Partition. I don't know what is happening.

  I've also entered the recovery disc and repaired this way.

  I'm on the forums before I decided to call Apple.

  Thank you.

  You have a Fusion drive?