Satellite a50: Quick Fix Engineering and Windows Update
I was wandering why some of the quick Fix Engineering published by Toshiba refer to problems in October 2003? for example, the most recent for my satellite a50 is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=29405&OSID=10&drive rLanguage = 13 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 0
that refers to a problem of October 2003 (http://www.microsoft.com/technet/security/bulletin/MS03-044.mspx)
I asked a similar question on this forum (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3131&messageID=9527#9527), but now I'm not so sure of the answer I received... Again, if I still have my Windows XP to update (from windowsupdate.microsoft.com) must I apply the miracle solution?
Thank you. Hpop
Hello
I put t know exactly how old is your device, but I know that at this moment, there is no SP2 and your device comes with SP1. Image designed for the contents of your device in a large number of QFES. As Tom says if you want to install Windows XP Home edition, you will probably use SP2. In this case, it is not necessary to install all QFE Toshiba site because they are already included in SP2. As you know, after installation of SP2, your device will be updated automatically.
Tags: Toshiba
Similar Questions
-
Question about Quick Fix Engineering on Satellite M40
Hello people,
I have a toshiba M40-145 and my problem is simple, Toshiba Download Center have many versions of Quick Fix Engineering, just install the latest version?
Hello
All software listed on the Toshiba download page are pre-installed in the recovery image. As a previous user, I've never installed all the patches listed just installed SP2 and after this review, the unit with Windows Update option in internet explore. On this time, you save a lot of time.
Each time the installation and the configuration was successful.
-
What is "quick fix engineering"?
Dear Sir.
in the "driverupdate" info I can find drivers "quick fix engineering": what they mean and does it download them? I use Tecra M2 XP pro SP2 and have automatic windows update
Greetings
Reg weekxHi, Renaud,.
Hope you are well. The Quick Fix Engineering elements are actually patches from Microsoft. They are the same ones that you will receive the installation of Windows Update.
If you have automatic updates configured then you will not need to download them from the Toshiba site.
Best wishes
-
Quick Fix Engineering - what is this?
Hello!
As many other users I received this email today from Thoshiba with a link to a driver download. Unfortunately, they provide no additional information about the pilot. See here:
http://de.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=37692&OSID=10&drive rLanguage = 17 & selectedLanguage = 17 & driverCountry = 41 & selectedCountry = 12
(It is not in the downloadable zip file is.)So, nobody knows what it is? I'm not going to install something on my computer that has not been explained or certified in advance...
Kind regards
Ayshe PetersHello
The Quick Fix Engineering are updated by Microsoft and that you will find on the Microsoft Web site.
But all the drivers, tools and Quick Fix Engineering are also pre-installed in the image of Toshiba.
This image that you can find on the Toshiba Recovery CD.It is also Toshiba driver page:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp -
I'm having problems with my HP laptop and updated KB2345886 who don't want to not install. I reinstalled it and to start my computer it goes up to 75% and fails. I ran will fix problems with Windows Update but troubleshooting couldn't identify the problem. I can't go back to restore Windows installed date of origin being on 15 October. When the update ran for the first time it was looking for Microsoft Works 9.0 disk I did not because it was preinstalled on my computer. I cancelled and uninstalled the app, but I still get the error. I don't know if the update is looking for a component of Microsoft Works 9.0 in the registry.
Additional information:
Update for Windows 7 for x 64-based systems (KB2345886)
"WindowsUpdate_8007000D" "WindowsUpdate_dt000"
Update for Windows 7 for x 64-based systems (KB2345886)
Installation date:? 11 /? 24 /? 2010 11:39
Installation status: failed
Error details: Code 80004005
Update type: Important
Install this update to help strengthen authentication information in specific scenarios.
After you install this item, you may have to restart your computer.
Help, please.
Thank you.
Jesus Romero
(And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.
1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings
5. open IE8 32 bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]
6. restart a last time & test.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Vista - Windows Defender error 0xc80000222 AND Windows Update, error 800800005
I replaced the hard drive on my HP laptop and used the recovery disks to restore my computer to factory setting. I also uninstalled Norton Anti Virus, download Mozilla Firefox and downloaded Avast Antivirus. I tried to update, but got 2 two errors - Windows Defender error 0xc80000222 (the program cannot check the definition updates) and Windows Update error 800800005 (Windows could not search for new updates.). I even tried to install Microsoft Fix to perform diagnostics, but it does not have (we're sorry, but Windows PowerShell could not run). My system sign says that Windows is activated. In the end, I want to use my upgrade for windows disk 8. I used these discs before recovery without any problem. Thank you.
Hello
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you which SP you have installed.
Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
See you soon.
-
Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F
Would you advice, thank you.Hi Hugo,.
1. what anti-virus software you have installed in the computer?
2. What is the full error message/code?
3. the issue occurred after you install Minecraft?
4. are you able to play Minecraft without any problem?
5. what happens with Antivirus and Java?
Windows Update can occur if one or more of the following conditions are met:
1. the Windows Update database is damaged.
2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.
3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.
4. a required system file is incorrectly registered.
5. Windows Installer has encountered an error.
6. the manifesto of component maintenance (EC) is damaged.
7. the Windows Update service has stopped during the installation.
8. a version of the file conflict exists with Windows Update agent files.
Please follow the steps described in the methods to solve the problem:
Method 1: We will try the steps from the following link and check the result:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058?WA=wsignin1.0
Method 2:
To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.
You can view the following link to download the system update readiness tool and check:
System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/947821
Details of the event log to find what caused the Antivirus and Java to fail:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Hope that the information provided is useful.
For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!
-
32-bit Vista, System Restore and windows update are suspended.
This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.
What can I do?
I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.
can anyone help please?
Thank you very much.
Hello
You should go to the system manufacturer's website and get the latest network drivers wifi and card.
Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.
Maybe the other pilots. software and updates to the BIOS, you can get there.
Control Panel - Device Manager - double-click on a device and check the version.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlthen also make - close all regular programs
Start command - in the search box type-
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
Rob - bicycle - Mark Twain said it is good.
-
What is the difference between Microsoft Update and Windows update?
My buton start brings up "Microsoft Update" and "Windows Update". What is the difference between the 2? If I click on do get updates for both?
Hi jt3219,
Yes, you will have updates for each of them when you click it. -
I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page. I have sp2, what don't get me?
Please see the thread below for a possible solution:
UTC/GMT is 07:51 on Wednesday, August 15, 2012
-
Windows and Windows update install error 641 that install the windows service could not be accessed
Original title: Windows Installer and windows update error 641
I get the following error when I try to install the latest Java Update. "The windows service install could not be accessed. This can happen if windows install is not properly installed. Contact your support team. In addition, I now have 14 exceptional installed updates which always fail with error 641. I have Vista 32-bit SP2. In addition, in respect of the services Windows Installer does not show so I can't restart. I tried all the other patches. Any ideas?
So what do you suggest...
Have you tried the resolution in RESPONSE to my colleague Maurice message in this related thread yet? -Online http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180
Have you contacted Mechnic (iolo.com) support system yet?
-
Original title: error code 88982F04
Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error." I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC. Can someone please help with an answer.
Thank you
Delete C:\$WINDOWS.~BT
Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.
If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you find it difficult to do some of the steps below, please see instructions how do their:
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
I get the error of certicifiate security and windows update error?
I get the error of certicifiate security and windows update error?
Hello
1. What is the full error message?
2. What is the error code that you receive Windows updates?
3. who is the antivirus installed on the computer program?
4. are you aware of changes to the computer before the show?
Discover the history of update and update verification is the origin of the problem. Also, note the details of the error.
Check out this link to do the same thing:
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
For the security in Internet Explorer certificate error, you can perform the steps described in the article.
"There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site
http://support.Microsoft.com/kb/931850
See also:
Certificate errors: FAQHope this information helps. -
Section user and Windows Update section of the computer in Windows 8 setting is missing.
Open Control Panel > user accounts > make changes to my account in the computer setting.
"Page not found. Sorry, the page you requested is not available, or you have found an outdated link. "is displayed.
I already tried Microsoft scanner security, sfc/scannow, auto repair and record using a hidden administrator account.
My power plan option page is also absent and when tried to open the parameter, "unable to open the access control editor. the activation requires the display name to stand under the CLSID key. Also, while trying to open the properties of the network connection, "an unexpected error has occurred" appears. I don't know if these problems are related.
I agee with dietydiablo, it was not pleasant to have to do a refresh and reload everything.
Also use even win 8 Pro with WMC.
I could not afford to wait and to solve the problems, and the update was a faster option. But I keep an eye on it now that if it happens again, I know when it happened. -
I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:
"Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »
So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."
After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »
However, no matter how long it works, it never gets past "Setup initialization."... »
So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.
So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.
So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.
Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.
In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?
Try the sfc scan:
http://support.Microsoft.com/kb/936212If not, repair of Vista:
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
Maybe you are looking for
-
Toshiba virtual Store account Reset - 25243
Virtual store Toshiba reset account 25243
-
Dell latitude D-610 windows pack 3 service floor mat problems. Pointer freezes.
My touchpad of Dell latitude D-610 does not often. The pointer will freeze for at least a few moments. I can sometimes resolve this problem for some time by putting the computer in standby mode and then resume the windows session. What can I do to fi
-
Windows Movie Maker, add narration and music?
Im trying to add music to the background of my video, but I also need narration. It seems as if I have only one or the other, and the only way to have 2 audio tracks is to use audio that comes with the video file and then have EITHER music OR narrati
-
HP Pavilion m7: delete portable computer keyboard buttons
I have a laptop HP Pavilion m7 that recently had orange juice spilled on a few keys on the keyboard. Is there a way to delete individual keys for cleaning without messing up the keyboard? I don't want to start trying to lift them without input from s
-
How to make your custom data type used in your QListDataModel to QML?
I have QListDataModel filled with objects of a custom class carying data and defined with Q_DECLARE_METATYPE. So far, it works however I can't access the data in qml: e.g. text: ListItemData.Name I read that this can be solved by letting QML know you