Boot process Scheduler error

Similar Questions

• Process Scheduler running SQR report gets the Client HTTP response Code 401 Unauthorized error

  People,

  Hello. I'm under PeopleTools 8,53 Oracle Linux 5 with Oracle 11 g 1 material database.

  Process scheduler run reports SQR and get the error message as below:

  Error of the client Http Response Code: 401 - non authorized. Transfer HTTP error.

  My report node information is below:

  URLID: http://ip_address:port/p/psreports/ch

  Home directory: /psreports

  Resource URI: SchedulerTransfer/ch

  Login ID: PS

  Password: mypass

  PeopleTools > IntegrationBroker > Configuration of integration > nodes: authentication option is selected password.

  The 2 roles, ReportDistAdmin and ProcessSchedulerAdmin are granted to the user PS

  Someone tell the error above due to incorrect or misspelled path for report repository in the configuration.properties file.

  I see no error in my configuration.

  My question is:

  Can any help folk to solve 'Error Http 401 - transfer HTTP error response Code' unauthorized customer?

  Thanks in advance.

  I think there might help:

  E-RD: transfer report error: Client Error Code: 401 - Unauthorized (63.59) (Doc ID 623250.1)

  E-RD: what are the steps to configure basic authentication for the repository of reports on PT 8,4 x using Weblogic? (Doc ID 970572.1)

  Also if you use this with test the load on load balancer balancer.

  Kind regards

  RAM

• Process scheduler doesn't start not

  Hello
  I am running 9.1 PeopleSoft HR, db Oracle 11.1.0.6, PT 8.50. The database, the application server and the web server are all on the same machine - Enterprise Linux 5.
  
  Basically, I have problems to start the server after an ip address change.
  I changed the system wide configuration ip - / etc/hosts, network ifcfg-eth0 script and so forth
  psappsrv.cfg has changed with the new corresponding, in charge of the tuxconfig edited ip address
  (also changed the configuration.properties for PIA)
  As far as the network is concerned, everything works fine - LAN and outdoor access.
  
  The database server and the Application starts ok. I can connect using sqlplus he-based and the Application Server starts without errors of psadmin.
  When I try to start the Scheduler process I get the following:
  

  Starting Process Scheduler Server PSUNX for Database HDEMO91 ...
  
  Booting all admin and server processes in /root/psft/pt/8.50/appserv/prcs/HDEMO91/PSTUXCFG
  INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
  
  Booting admin processes ...
  
  exec BBL -A :
       process id=5200 ... Started.
  
  Booting server processes ...
  
  exec PSMSTPRC -o ./LOGS/stdout -e ./LOGS/stderr -A -- -CD HDEMO91 -PS PSUNX -A start -S PSMSTPRC :
       process id=5201 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5221 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5229 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5237 ... Started.
  exec PSDSTSRV -o ./LOGS/stdout -e ./LOGS/stderr -p 1,600:1,1 -sPostReport -- -CD HDEMO91 -PS PSUNX -A start -S PSDSTSRV :
       CMDTUX_CAT:1685: ERROR: Application initialization failure
  
  tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
  
  exec tmshutdown -y

  CRP / < domain >/LOGS/stderr:

  PSJNI: INFO: Unloaded the Java VM

  CRP / < domain >/LOGS/stdout:

  =================================Error===============================
   Message:  The FTP Address for transferring files to the Report Repository is not specified
  Please correct this error by updating the info for Report Node: ReportNode
  in the Process Scheduler Manager's Report Node Definition page.
  Due to this error, the Process Scheduler Server will not be started..
  Please correct this error prior to attempting to start the server PSUNX.
  =====================================================================

  Now, looking at the stdout, it seems that the solution may be a simple configuration change, but how do I access a report node page?
  
  I tried to start PIA just to see what would happen. I get the following message on the page of signon PS:

  CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session

  I'm a newbie at this and appreciate any input.
  Kind regards.

  Honza,

  Server Web fails to communicate with appserver. I guess that the port number you have given to the webserver configuration files (configuration.properties) is correct? Check psappsrv.cfg and match the port numbers.
  1. try changing IP address host name of the Web configuration.properties file server. Server Web Bounce (Restart) and appserver. If this does not
  2 recreating the field appserver and Web server with a different port number other than 9000. Make sure that the port numbers are not blocked

  -Vijay

• Windows Boot Manager failed error

  NB: I have a very short time. her tomorrow. I have a very glitchy w4 Iconia, who has been with us for a day and night, with several screen flickers and this problem I am submitting. Boot Manager Windows failed to start my iconia, which means I can't even swtich it took off. After two other messages come iup which are almost the same, the message: "Default Boot Device missing or startup failed. Insert the recovery media and press a button, then select "Boot Manager" to choose a new device Boot or Boot Recovery Media. "The two Previos are"1. Windows Boot Manager start failed. "and"failed to initialize the Windows Boot Manager. "I'm experienced in it so I know that something has gone wrong with the boot process, so nothing else running this error start freaking program other some other starnge treats that i have no knowledge of. the next screen that is displayed after the third popup says

  Menu Option to start 1. Manager start Windows ESC to exit

  Bluetooth doesn't seem to be running so im stuck with by clicking on windows boot manager which throws me through this lopp everywhere again. Ive plugged my tablet on my computer but it doent seem to be recognized as a disconnected device.ive it in fear of this charge as the race to the bottom of the stack seemed work very well on my mini ipad when it gopt stuck in a screen.i gel do not think the iconia will start correctly after he sinks since I don't have any medium of recovery and I have a deadline. that is tomorrow morning. knowing that the iconia has a max of 9 hours batterylife, I'm sure the battery rundown will work. Please advice cocoralie knowledge. If you are bored to my typos, please llok in my entry in the welcome forums.

  Hurtling down the battery seems to have solved the problem! Works great! No I don't think that there is a malicious, just stuff software in the code.

• Cannot start the process scheduler

  
  Hello

  on F91SCM, 8.52 on Win 2008 DB Oracle 11.2.0.3 tools

  Application server starts end but cannot start Scheduler process with:

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  tmshutdown - qy
  LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 8097 - Oracle initialization error
  PSAESRV.2512 (0) [08: 18:24] (0) 23/10/13 server could not start

  It may be no database connection problem because AS runs with the same and databases of user originally of the same server. Since this is a DB refreshed, I deleted the data from PS_SERVERACTVTY, but did not help.

  Thanks for help.

  Please, make sure that you have installed the Oracle 32-bit client and it is the first channel in your app. variable PATH in the field of process scheduler configuration.

  Something in stderr/stdout files?

  Nicolas.

• How to solve the problem: Oracle BI Scheduler error: [nQSError: 68019] Authent

  I have configured the oracle BI schedular but when I creat a new ibot .i can't save it .i got this thing:
  Oracle's BI Scheduler error: [nQSError: 68019] authentication failure
  you know it? Please give me the detailed process to resolve
  Thank you very much.
  I started the schedular system server.

  Hi user,

  Looks like you has not completed all the steps of configurations for the book. In particular, you must run a utility named instanceconfig.xml cryptotools and update.

  Reference: http://gerardnico.com/wiki/dat/obiee/scheduler_configuration

  Thank you
  Aravind

• Process scheduler

  Hello
  
  I have created and configured the Scheduler process thanks to psadmin.exe and get the error when tried to start...
  
  -------------------------------------------
  Administration of PeopleSoft process scheduler
  -------------------------------------------
  
  (1) start a server process scheduler
  (2) stop a server process scheduler
  (3) set up a scheduler process server
  (4) create a scheduler process Server Configuration
  (5) remove a server process scheduler Configuration
  (6) to edit a process scheduler Configuration file
  (7) import an existing Configuration of the process scheduler
  (8) show the State of a server process scheduler
  (9) kill a bailiff Scheduler
  (10) clean the IPC resources in a domain of process scheduler
  
  (q) quit
  
  Command to run (1-10, q): 1
  
  
  List of database:
  
  (1) SC
  
  Select the item number to start: 1
  
  No subdirectory Archives creating...
  No psprcs.cfg in the subdirectory Archive, creating...
  
  
  The PeopleSoft ODBC and libraries of Crystal driver installation...
  PeopleSoft installed ODBC driver.
  
  
  
  NVision inscription...
  PeopleSoft nVision registered.
  
  
  From Planner bailiff referring to the HC database...
  All admin process is started and the server C:\PT8.49\appserv\prcs\HC\PSTUXCFG
  NEWS: BEA Tuxedo, 9.1, 32-bit Version, Patch level 036
  INFO: Serial number: 650522264137-2065448083901, Expiration ZERO, Maxusers 1000000
  NEWS: Licensed for: Oracle-Peoplesoft-ISV
  
  Starting process of the admin...
  
  exec BBL - one:
  process ID = 3280... Has begun.
  
  The server process starting...
  
  exec PSMSTPRC - A - psprcs.cfg - C - CD HC - PS PSNT-A begin if PSMSTPRC:
  CMDTUX_CAT:1685: ERROR: initialization of Application failed
  
  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch user ha error
  ndler
  
  tmshutdown y
  Close all admin processes and Server C:\PT8.49\appserv\prcs\HC\PSTUXC
  FG
  
  Stopping the server process...
  
  
  Stopping admin process...
  
  ID of the server = 0 GID = VIPUL-187A83D08 Machine = VIPUL-187A83D08:
  stop succeeded
  1 interrupted process.
  
  
  Thanks in advance
  
  Vipul

  I guess I got it. The name of the comic was wrong. Now, I'm done with the installation. All work well.

  Kind regards
  Saty.

• Satellite L305-S5955 - gel of the boot process

  Toshiba Satellite L305-S5955
  Once it froze early in the boot process - until windows starts, indicating (to me) it must be material.

  John

  Hi John,.

  You have already reinstalled Windows with Toshiba Recovery disk (factory settings)?

  If Yes, it could be a hardware problem, otherwise, it looks like a software problem or driver.

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• WHT is the win xp boot process

  WHT is the win xp boot process

  Hello, Nithya subramanian,

  Windows NT startup process

  The Windows NT startup process is the process by which Windows NT 4.0, Windows 2000, Windows XP and Windows Server 2003 boot operating systems . In Windows Vista and later versions, this process has changed slightly; See Windows Vista boot process.

  http://en.Wikipedia.org/wiki/Windows_NT_Startup_Process

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Task Scheduler error: "an error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.

  HelloW everyone,

  I changed my name to the laptop and now every time I have lunch Planner task, I receive the following error message:

  "An error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.

  I also have the problem with restore points, so these two issues relate to eachother? How can I solve the problem of the user name.

  Any suggestion and help appreciated

  Hello

  You can check out the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/odd-Scheduler-error-messages/a487d70b-61c9-499F-ae15-ac903d6174eb

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Performance - remove igdkmd64.sys monitor - its by slowing down the boot process

  Hello

  I am running windows 7 Home premium SP1 64-bit and the monitor above suggests that I try to delete the driver above because it slows down the startup / boot process

  Can someone please suggest easy steps to remove the same and if there are implications for the removal of the driver

  Hello

  What is there to process you followed to remove it... It's actually not a bad file... Its graphic driver Intel. Igdkmd64 sys is the Intel Graphics Kernel Mode Driver for Microsoft Windows 8, Windows 7, Windows Vista, and Windows XP 64 - bit operating systems.

  the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

  http://www.Intel.com/p/en_US/support/detect

• Process Explorer error BES when you try to browse the files and folders; and Internet Explore AppHangB1 when you try to attach files to download in Windows 7.

  Hi everyone, auggy,

  I really hope you can help me with a problem I have on a single workstation at my office.  It is an accumulation of 32-bit Windows 7 running MS Office 2010 Standard.  It differs from other generations in our office because it is used by the head of the team of our accounts, and so it has a number of custom pieces of software that she only needs access (payroll software, etc.).

  All the basic features of the computers seem to be well, except the two following, and I would really like to help get to the bottom of it.

  (1) process explorer error when you try to browse the files and folders of BES.

  I can call Windows Explorer absolutely perfect and be sailing away on his machine, and then suddenly the process explore will die, with the following error: -.

  Signature of the problem:

  Problem event name: BEX

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d6727a7

  Fault Module name: StackHash_0a9e

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 03e2f944

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  I can start windows Explorer, and it will happen again--it's a repetitive event.

  (2) Internet Explorer AppHangB1 when you try to attach files to download

  I think that these two errors may actually be related, like IE (and Chrome as well by the way, this be why I think that the two issues are related) works fine, until I just any type of site where I need to download a file.  This happened in the light, as our Chief of accounts needs to download a flat file in a room online banking software.  What's going to happen (and, again, this can be repeated as needed) is: -.

  (a) you need to click on which will generally be a "Browse" button

  (b) a traditional dialog box opens, but instead which allows you to navigate to the location and select the folder you want, he immediately greys out as if the process explore is falling.

  (c) shortly after, the following error is returned: -.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: iexplore.exe

  Application version: 11.0.9600.16521

  Application timestamp: 53114399

  Hang Signature: ffae

  Hang Type:                                          513

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Signing of additional blocking 1: ffaeadd6649c2780023c6d9ea230850d

  Signing of additional blocking 2: e32d

  Signing of additional blocking 3: e32d1064528f9bd1cbe46cdd0db7b0f1

  Signature of blocking additional 4:0498

  Signing of additional blocking 5: 0498e046eb6db4d68a7cd9b11dab2644

  Signing of additional blocking 6: effb

  Signing of additional blocking 7: effb796b5c1ff7f6708d2722fa7c24bd

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  On auggy recommendation, I've set up a registry key insert that returns the explorer.exe hangs in a dump file, and I am trying to load two reports on SkyDrive - I'll post the URL in this thread as soon as I finished it.

  Can someone help me please?

  Thank you very much!!

  David.

  Hi auggy, Andy,.

  Well... in a way, I am very disappointed, but we will respond to it.

  Andy, I checked and iCloud, Control Panel has not been installed on its terminal, but thank you very much for suggesting it :)

  auggi, when I got back on my colleague's PC, I thought I would test to see if the feature didn't always before considering saving data dumps etc, and it worked fine!

  I left it overnight with instructions for the lady who uses the PC to test this morning and see if it's all workers, and it is still, it seems that the fix does not immediately solve the problem of browser, but there later - maybe after a second reboot or something... very strange!

  In all case, this matter can now be considered closed, so all that remains for me to say thank you very much for your help, you are amazing :)

  All the best, very, very,.

  David.