LWAPP: upgrading a 1242AG in light mode

Similar Questions

• Autonomous to LWAPP upgrade on 1242ag AP failure

  Upgrade tool I am trying to convert an AIR-AP1242AG-A-K9 LWAPP autonomous access point but the upgrade fails when it tries to load the recovery image on the AP. Has anyone encountered this problem and if so, what is the solution? 12.3 (11) running IOS JA on the AP.

  Hi Jason,

  Load the standalone IOS using the mode button. Once the IOS is running, copy the recovery image using the "copy tftp: flash:" and change the boot settings to start the recovery image.

  Once the AP boots the recovery image, make sure the AP can ping to the IP address of the WLC management and use the command 'lwap ap controller ip address.

  I hope this helps.

• 1142 standalone image upgrade in light Mode

  Hi all

  I spend 1142 APs stand-alone a lightwheight with WCS, but I can't find the recovery image (c1140-rcvk9xxxxx).

  On the Cisco website > support > download > wireless > ap > 1140, if I click on the standalone link to light Mode upgrade Image, I get an error message "no final version available for downloads.

  Any ideas where to download this file?

  Thank you.

  Manu

  Hello Manu,

  Look under the standard IOS images for a - JA 12.4.21;

  WIRELESS LAN LWAPP RECOVERY                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     c1140-rcvk9w8-tar.124-21a.JA.tar

  He's here for a reason

  See you soon!

  Rob

• Docking station remains in light mode when you go dark

  When you turn on the dark mode, the bar menu goes into mode dark but the dock remains in light mode, even if the app under the icons indicators go to dark mode. I tried to restart my mac and relaunch the dock but nothing doesn't seem to help. I've attached a screenshot of the problem. Anyone know how to solve?

  

  Hi, appleuser493.

  Please visit Apple support communities.

  I understand the dock with do not adjust in the dark when option selected.  To avoid to go directly into a relocation, we will test to see if the behavior persists in a new user and also in safe mode.

  How to test a question in another account on your Mac.

  OS X El Capitan: start in safe mode

  See you soon

• Multiple SSID for AP in light mode

  Hello

  I tried to configure an AP that is light to have multiple SSID mode, as I do with autonomous AP but I couldn't, is it possible for an AP in light mode to have multiple SSID? If so, how can I do that?

  Thanks in advance for your help.

  supported wireless LANs is 512 and the AP you're just 16...

  http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52wlan.html

• Since win 8, Fn + F8 upgrade only changes to the mode of plan on TECRA R850

  Hello

  My Tecra R850 - 1 CL (with Ericsson 3 G modem) has 2 LEDs for the network: a yellow for the WiFi LED and one light blue for 3G.

  Windows 7 64 bit, everything worked OK and Fn + F8 allows to enable or disable the WiFi and 3G.

  Since I've upgraded to Windows 8, Fn + F8 works only in flight mode, yellow seeing Wifi is always the same mode aircraft and blue indicator of 3G is almost always on, even when 3G is not connected or when the adapter is disabled.

  I did the upgrade of W8 with upgrade Toshiba Utilities, and the computer is up-to-date (BIOS and drivers).

  How you can not get a correct behavior for network LED indicators?

  > Since I upgraded to Windows 8, Fn + F8 only switches in airplane mode

  The Fn + F8 key combination 8 jobs to earn running a little different.

  Using Win 7, FN + F8 combination switches between Wlan, 3G and Bluetooth but to help to win 8 key combination passes ONLY the airplane mode ON and OFF.

• How to convert an AP 1700 / 2700 light mode to standalone mode?

  I know that support AP1700/2700 unified by version 15.3.3 mode.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/access_point/15-3-3/configuration/guide/CG15-3-3/CG15-3-3-Chap1-overview.html

  But I couldn't change the mode because of the following error.

  AP1c6a.7a92.5468 #CAPWAP autonomous ap

  Convert a stand-alone image. Move forward? (yes / [No.]): Yes

  No found stand-alone image! The conversion failed.

  Why this error message displayed? Please tell me how I can solve this problem.

  Thank you.

  Atsushi

  According to me that ap1700 can start using a light image which is on the page of downloading software for AP2700/3700.  Is this correct?

  Yes, that's correct, according to this 1700/2700/2600/3600/3700 all have the same image starting with "ap3g2-xxx '.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/access_point/iOS/release/notes/RN-15-3-3.html#32237

  Ap3g2

  1700I 2700I/2700E, 2600I/2600E, 3600I/3600E, 3700I/3700E

  HTH

  Rasika

  Pls note all useful responses *.

• upgrade to new version-> mixed mode

  We intend to move to 8.0.1. our environment must be 24 x 7, so all of our servers are load balanced and redundant. Is it possible to work with different versions of vWorkspace in 1 environment? Let's say I have 2 brokers a 7.6 and the other 8.0.1? or 1 secure gateway 7.6 and the other 8.0.1? and of course RDSSH servers, can run 7.6 and 8.0.1? Mixed Setup will not forever, just a few days. Due to availability 24 x 7, we cannot restart each server whenever we want.

  With 8.0.1 and beyond, you can upgrade all your brokers.
  The RDSH will continue to work, but the management consoles will be error.

• Pavilion g4-1215dx blu ray upgrade level, sector + cigarette lighter

  Anyone know if there is a player of blu ray available for a g4-1215dx Pavilion laptop? I also need a car charger. There is not a lot of Info for the laptop computer on this site the extent of tweaking or accessories.

  Thank you

  Hello

  Based on this, (page 49) for your machine, you can order a Bluray. For the car charger, please look at this

  Kind regards.

• 1141, upgraded to Light Weight?

  Hello

  I wonder if there is another method to upgrade an AP1141 in light mode than a/b/g APs?

  I followed the normal procedure but the upgrade tool sent a message saying "AP" IP ADDRESS not supported by the upgrade tool"

  Any comments?

  Kind regards!

  the datasheet tels us tha tthe minimum software required is 7.0
  

  The data sheet is incorrect.  I used 1140 to 6.X because it's the same 'level' where work OfficeExtend.

• bright light blending mode

  I'm having a problem to flatten a file with a layer set on vivid light mode. During flattening or stamping the effect disappears - any suggestion?

  Define your image 100% mode (actual pixels) before flattening

• Upgrade protection mode

  I've never used any except Performance Data Guard protection mode before so please forgive me if my questions seem ignorant.
  
  I have a primary database with 2 two Standby currently operating mode maximum performance. The primary is a 2 node RAC cluster. The two reserves are a single instance. None of the databases in the configuration use Eve newspapers (yet). I am currently using ARCH to ship newspapers to two standbys. All databases are running version 11.2. I do not use Data Guard Broker.
  
  I am considering just upgrade ensures maximum availability protection mode # 2, but I don't know if it of really what I want or not. Maybe someone here with a better understanding can confirm if it is the best choice.
  
  My goal is to get the possible maximum data protection with no performance impact whatsoever on the primary database.
  
  As I understand it maximum availability (and I am not sure I do), a commit issued on the primary will not end until waiting for maximum availability has accused receipt of data recovery. If the link between the two breaks down, which could introduce a significant delay in the validation. Is this correct? In my situation any impact on performance on the primary DB is unacceptable.
  
  Perhaps what I want, it's maximum performance using newspapers of the previous day, with the LGWR and ASYNC attributes enabled on the corresponding parameter log_archive_dest_n. I understand that a commit on the primary will end as soon as it again is written in the local newspaper of restoration by progress and of the availability of the standby destination will have no impact on performance at all. In general the day before will remain only a few seconds behind the primary. If the link between the two breaks down, I can warn me of the situation with a simple query v$ dataguard_stats and fix everything that is the underlying problem.
  
  Can someone please confirm me if I understand the behavior of postings under these two different modes of protection and modes of transport?
  
  Also, if I do create a newspaper waiting for the destination, also should I create them on primary and other sleep as well.
  
  Thank you.

  The 2 modes of protection higher impact on performance on the primary. You can't avoid it. You can only try to limit this impact.
  This is the price you pay for any loss of data in case of failover.

  See here for more details:
  http://www.Oracle.com/technetwork/database/features/availability/MAA-WP-10gR2-dataguardnetworkbestpr-134557.PDF

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Updated standalone Cisco Aironet lightweight mode Access Points

  I'm trying to convert a stand-alone Aironet 1200 in light Mode. I use the tool to upgrade v1.0 proposed by Cisco. But when I put the name of the recovery LWAPP Image (c1200-k9w7 - tar.123 - 7.JA2) in the tool window to update it doesn't work. It is said: c1200-k9w7 - tar.123 - 7.JA2 - LWAPP recovery Image file size is zero. But its size is 4.6 MB!

  Can someone help me?

  Convert the Aironet 1200 of autonomous light mode follow the procedure set out in document http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp23144.

• convert a light 1602i to stand alone?

  Someone has a link that explains how to convert a 1602i AP light standalone mode?

  Thank you!

  Joe

  Try these:

  By using a TFTP server to revert to a previous version

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp160918

  http://www.YouTube.com/watch?v=QQ_NuxdRhQ4

  https://supportforums.Cisco.com/docs/doc-14960

• A stand-alone 1252 can be converted to AP light?

  I received incorrectly an AP 1252 (AIR-AP1252AS-E-K9 model number) and hope to convert to a light AP. But in the documentation for this device is missing in the list of devices that can be converted.

  I am also unable to find a tool to upgrade for this model.

  Is it possible to convert this device?

  Someone on the forum used the last upgrade tool and siad, he was able to convert the LWAPP 1252. You can try it, otherwise here are the steps of another Member on the conversion of these ap:

  Here is a method to perform the conversion.

  * Method 1: (Mode key) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4 rename c1250-rcvk9w8 - tar.124 - 10B .JA3 c1250-rcvk9w8 - tar.default

  5. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  6. connect the Ethernet port on the AP to your server TFTP (laptop)

  7 press and hold the mode button and power off of the AP.

  8 power back the AP while constantly maintaining the button mode for 20-30

  seconds.

  * Method 2: (Archive command) *.

  1. install an external tool of TFTP for example tftpd32 from http://tftpd32.jounin.net/ tool

  2. assignment of IP address in the range of 10.0.0.2 -.254 (Ex: 10.0.0.3) to the TFTP (your laptop or pc).

  3. download the IOS lwapp image on the tftp root directory. Use http://www.cisco.com or

  http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4 (10B) JA3 & starts = 271159 & treeMdfId = 278875243 & tree_name = wireless

  4. make sure that you set the IP address on the IVB of the AP interface if it is not set. Set it in the 10.0.0.x range default is 10.0.0.1.

  5. connect the Ethernet port on the AP to your server TFTP (laptop)

  6. at the point of access, type archive download-sw / overwrite/force-reload tftp: / //c1250-rcvk9w8-tar.124-10b.JA3

  ****************************************************************************************************************************************

  The other direction (lwapp to stand alone)

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  ****************************************************************************************************************************************

  If you must manually 'Prime' the LWAPP:

  Ap #lwapp AP ip address

  AP #lwapp ap ip default-gateway

  Ap #lwapp AP controller ip address

  Hostname ap AP #lwapp

  (optional)