'boot system flash' and 'boot system flash flash0.

Similar Questions

• Booting from a flash drive fails with a message: operating system not found

  I tried to boot from a flash drive, but it says operating system not found. Is there something wrong, that I did? I used a program called ISO on USB and he managed to copy the installer of Ubuntu on my flash drive.

  As you try to install a Linux operating system, I recommend you this announcement in a Linux forum. Not many people on these forums will be familiar with the installation of LInux.

• Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window

  Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?

  Why I get this is event viewer? Source ACPI
  The embedded controller (EC) data returned when none was requested.
  The BIOS may try to access the European Community without synchronization with the operating system.
  These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?

  I used Windows 7 drivers.

  Thank you

  Hey mate,

  I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.

  About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?

  I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.

• While booting, my command prompt flashes and I can't read anything.

  Original title: ettore1

  Windows XP sp3 home edition.

  When I connect, desktop will open and display the icons. At this time a command prompt flashes on the screen and disappears. I am not able to read anything. This has never happened before and the security scanner, Vipre antivirus, Viprerescue did not find any Virus on my PC. When a command prompt opens it means that something does not work without my knowledge

  Any help please?

  Thank you

  Hi ettore1,

  ·         Did you do changes on the computer before the show?

  Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BSOD flashes for only a microsecond, can not find the way to disable autoreboot without booting properly and may not start successfully

  I get at my wits end here on this one.  This morning my antivirus (AVG) wanted software reboot to continue the installation.  I put it off several times and then finally said ok for her.  Since then, I am not able to boot into Windows (Vista Home Edition, updates are on, it should be whatever the latest version is).  I see a blue microsecond Flash long on my screen after a certain point, each time, but my eyes are not enough fast to handle some error code it gives.

  Safe mode does not load in any of its iterations.  Try to repair it with the installation disc, and he informed me usefully could not find a problem.  Is it possible to either freeze the computer on the error at this point (so I can understand what the underlying problem is?)  Or do I have to have a fancy paperweight?

  Unplug all devices from your PC - printer, USB phone cables, etc.

  Try to repair the operating system using the installation of drives now and see if it detects a problem.

  Do you see an option - "Last good known Configuration" tapped "F8" permanently? If so, try this.

  OR...

  Get your hands on a Ubuntu or any other Linux distro LIVE CD.

  Start the Linux operating system using the Live CD and copy (backup) of all your IMPORTANT data to an external drive.

  Once you have done this, format your hard drive and clean install Vista OS again...

  MRI!

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• I accidentally put my system as boot partition and my windows partition not marked as boot! Windows will not start! ):

  Hello

  The other day, I have been stupid, play with my windows partitions, I tried to dual-boot android 4.0 with windows, of course, as a study (this version of android has been mainly Linux). A test installation somehow fault, I put my Starter instead of windows system partition! Now windows will not start, it stays on a black screen with a sign less this sort of thing flashes in the corner.
  So I jumped in my disk windows ultimate 7, and it saysBOOTMGR IS MISSING Ctrl + Alt + Del to restart"" and if I try to install Ubuntu via live disc or USB does not start or the other, it displays the same thing.
  Can you please help me solve this problem!
  Nice day!

  After having the BIOS change, restart you your computer with the repair disc in the drive?  If so, what happened?

• When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »

• If flash player problem, there is nothing wrong to do a system restore when he was working and not day of flash player, but firefox update?

  flash player update and update of firefox is not compatible. Do not play videos or connect to web sites and freezes... Solved by doing an update of windows system where he was working. This gives you a work of flash player, and you don't update and cancel the automatic updates. You can update firefox. A simple solution, just type in system restore in the start menu and follow the directions. Worried if there are drawbacks.

  Thanks for the replies. Here is my story: after the update of firefox and flash player June 22, I was unable to use my computer effectively. I am retired and use the computer for research, the entertainment and recreation. and I could not reach sites, found sites gel, could not play videos or hear telephone conferences. I tried to replace the flash player with older versions of the flash player, but kept receiving messages that the installation failed and I needed to install the latest version, I tried to get rid of. I also reinstalled firefox and flash player disabled player real and cleared the cache and cookies. I did not disable the protected mode which seemed complicated, I knew how to clear cookies in firefox at the time here.
  I decided to do a system restore before June 22. I have found that installing and reinstalling and put to date had exhausted most of my system restore dates, but I was able to find one on June 3 and he ran. If other people will try this fix, they should do it before he runs of dates.
  The fix worked, and I have not seen any bad effects. I have no files or important data. I see that this could be a problem. However the difficulty of making a system restore is running much less than firefox in safe mode or some of the other methods of obtaining an older flash player which I have been unable to do. Also I don't know how to disable the protected mode or quick acceleration, but I see that people should be judged with the fix of real player before doing a system restore which seems to be a last resort, for your comments.
  I was more concerned about security than with the loss of data. It seems that adobe tries to protect firefox users of problems with viruses with protected mode, and using the flash in prior non-protected mode was what I've been concerned. However, if I couldn't use the computer, the protected mode was not any help. I could stop and protected him, also. I didn't suggest others to do this fix if it was dangerous, but for me it was quick and easy to a moment that I was about to give up. I wanted others to know about it, because it works, but I didn't want to be the cause of unintended consequences. So I guess I have found, use the fix at your own risk and try first the other sollutions.

• Won't boot NB205 - black screen and white flashing underscore

  My toshiba nb205 won't start...
  Its shows a black screen with flashing white underscore in the top left...

  What should I do?
  The operating system is bad? Bad hard drive?
  Bad motherboard?

  Please help thanks guys.

  Hello

  I can't give you a precise answer.
  Restart your laptop and enter the BIOS settings.
  Disk recognized and listed correctly?

• Lack of operating system and after this Vista boot

  I have Windows Vista and the last few days after that I put on and you see the next thing Tosiba logo is "missing operating system".
  Wait about one second then boots fine and is perfect.

  Why is he telling me this, is there a problem with the hard drive?

  What model laptop do you have?

  Is there a CD in the drive, or a USB attached?

  Perhaps the boot priority is on CD or USB and his attempt to boot from one of these devices

• Boot Camp and select the operating system

  I installed Windows 7 and can not see where boot camp is installed.

  Windows is the default system, but I want to return to the ability to choose what system I use at startup.  Which key I want when starting to give me the disks/partitions to start for both systems.

  Thank you

  Use the Alt/Option key or install drivers of BC that have a set of applications. Please visit https://help.apple.com/bootcamp/controlpanel/5.1/ .

• I installed Windows Developer Preview and I need to double to boot my system with the previous version of Windows 7 that is already installed on my computer.

  How Dual boot my windows 8

  Hello
  I have recently installed windows 8 developer preview and I need to dual boot my system with the previous version of windows 7, which is already installed on my computer.please me how to Dual boot my system with windows7.i need both versions on my computer suggest.
  Please suggest me a way to dual boot

  Ask in the forum Windows Developer Preview:
  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral

• can I pick up my dual boot after installing win xp on win 7. I lost my dual boot and my sytem starts with xp ony. I try to repair my system with win 7 dvd, but it only to get win 7.

  I have a system dual boot win - xp & win - 7. I reintall win - xp that disable my dual boot and I have win - xp.

  I'm trying to repair it with win 7 dvd but it only recover win - 7. can I pick up my dual boot? Help, please

  EasyBCD allows you to add the missing version of Windows in the start menu.

  EasyBCD (free for non-commercial use):
  http://NeoSmart.NET/DL.php?id=1
  http://NeoSmart.net/blog/2012/announcing-EasyBCD-2-2-Windows-8-dual-booting-and-more/

  J W Stuart: http://www.pagestart.com