error 0xc0000135 on a windows server 2003 R2.

Similar Questions

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• Error during installation of Windows Server 2003

  I installed VMWare Player, however, when I went to install Windows Server 2003 (easy installation) on my windows 7 Home Edition (64-bit) as owner / administrator.

  The VMWare authorization Services do not seem to be started, but when I try to start them via the services.msc, I get the following error:

  "Windows failed to start the service on Local computer VMWare authorization Service.

  "Error 1067: the process terminated unexpectedly."

  I studied this error and saw a few notes on adding __vmware_user__ my users the.  But with what privileges?

  I also saw a few notes on execution of "regsrv32 vmauxx.exe" which does not work on my computer.

  Any ideas on how to proceed?

  Thank you.

  Lee

  Welcome to the community,

  Installing on Windows 7 is sometimes delicate. Take a look at http://faq.sanbarrow.com/index.php?solution_id=1113 to verify that your installation is ok or how to fix it in case it is not.

  In addition to the installation of VMware Player, I suggest that you install the guest without using "Easy Install".

  André

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2003 - Error Codes: 0X800706BE & 0X800706BA

  I have a server with Windows Server 2003 Enterprise Edition custom which is made of multiple system errors of Windows Update Agent with ID 20.

  Here are some examples:

  Installation failure: Windows failed to install the following update with error 0x800706be: update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168).

  Installation failure: Windows failed to install the following update with error 0x800706ba: Security Update for Windows Server 2003 (KB979683).

  In addition, there are 20 twenty updates that produce the total failure of the installation with the 0x800706ba error. The first installation of .NET framework 3.5 SP1 error is the only one with error 0x800706be.

  To resolve this problem, I did the following:

  Stop the automatic updates service, renamed Software Distribution files in C:\WINDOWS and C:\WINDOWS\system32, and then restarted again the automatic updates service.

  The same problem occurred (updates will download, but not with the error ID 20 system event) and so I did the same steps again and also reinstated the SOOPER services:

  1. run "gpupdate/force".

  2. run "/detectnow wuauclt.

  And once again, downloaded updates, but not settle and the recorded errors.

  What else can I try to get these updates installed?

  If the computer, in fact, update through Windows Update, post it here instead: http://social.technet.microsoft.com/Forums/en/winserversecurity/threads

  If, however, it updates via WSUS, post here: http://social.technet.microsoft.com/Forums/en/winserverwsus/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en

• -name of the server is not accessible you could are not allowed. I used windows server 2003 and windows xp as a client, the error is delivered in windows xp

  -name of the server is not accessible you could are not allowed. I've used windows server 2003 server and windows xp as a client, we use workgroup

  comed in the client error when we open the Working Group

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• BlackBerry Smartphones Blue error screen when the "BOLD" connection via port USB for Windows Server 2003

  I try to activate a new blackberry 9000 "BOLD", the first time I plugged the server he was immediately recognized and installed. I selected add new device of the user and the activation process started, but about 1 min in the activation I got a blue screen error stop 'driver of bugcode_usb.'

  After restarting the server I reconnected the "BOLD" to the server and once more Windows he acknowledged and began the installation process, this time however, the VM didn't pick it up and I had to click on VM > removable devices > usb devices to start the process of installing how he immediately provoked the stop error blue screen again.

  We run BES 4.1.4 on Windows Server 2003 in a virtual machine (VMWare 1.0.4) environment

  Does anyone have any suggestions? I don't want to plug it back for fear of crashing the BES server again.

  have you tried wirless EA?

• Error: event. ReconfigurationFailedEvent.summary Windows Server 2003

  Hi all

  My customer has a Windows Server 2003 R2 Standard Edition, which failed to P2V conversion around 97-98%.

  The error on the GUI is: error: event. ReconfigurationFailedEvent.summary

  Then, I found a discussion on communities vmware (link below), and this person had the same problem as mine. So, I tried a lot of changes on my server but nothing works.

  Failed: Could not find the system volume, reconfiguration is not possible.

  I have attached my exported logs.

  Thanks in advance for your help

  Do not delete the boot.ini file! It is your Windows startup configuration.

  You should remove \boot folder or as an alternative just rename it to \boot.bak for example.

  HTH

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• Incremental backup on Windows Server 2003

  Hello

  I have full backup in the extension .bkf on Windows Server 2003 and I want an incremental backup, but it does not complete.

  A few errors that appear.

  Please, share your experience as soon as POSSIBLE.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2003 detects no audio device

  When I start Windows Server 2003, I hear no sound start. I hear no sound XP, nor do I hear the sound of UK.

  Then, I discovered that volume does not work as well. When I go to start > Control Panel > sounds and Audio devices, it says "no Audio device". There IS an audio device built into the logic board.

  I went through every troubleshooting step and what I see is that I need to get drivers.

  Unfortunately, Windows Server 2003 is an old operating system, and it is almost impossible to find the drivers. When I go to start > administrative tools > computer management > Device Manager, I see one category "Other devices" with a yellow question mark icon. I see 2 devices inside, "On the HD Audio Bus Audio device" and "Base system device". Both have a little yellow warning sign next to them. Double-click any of these two, and he said: 'the drivers for this device are not installed (Code 28)', and when I click on the button to install the driver, it gets stuck in the research or error "cannot install this hardware", said.

  I don't have the disc or Windows recognize even anything on both devices. I also made sure that audio has been enabled in the Services, and that did not work. You have a driver or a fix? Answer as soon as possible!

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer.

• Windows Server 2003 R2 explorer.exe crashing

  Hello

  I am looking for help on a PC server.

  All programs work correctly and for all intensive purposes, the server is very good.

  The problem is that explorer.exe crashes every 3 to 8 seconds.

  I had a quick glance at the file hmdp and tbh it means nothing to me.

  Could someone kind take a look on it and maybe point me in the right direction?

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  [C:\Documents and Settings\electrical\Desktop\error files\explorer.exe.mdmp] Dump file loading
  User Mini dump file: only registers, stack them and portions of memory are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows Server 2003 Version 3790 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: Server, suite: TerminalServer SingleUserTS
  Computer name:
  The debugging session: 04:48:47.000 Wed May 29, 2013 (UTC - 07:00)
  System Uptime: not available
  Running time: 0 days 0:00:05.000
  ..............................................................
  Loading unloaded module list
  ..........
  This dump file is an exception of interest stored in it.
  The stored exception information are accessible via .ecxr.
  (b10.700): access violation - code c0000005 (first/second chance not available)
  EAX = ebx 00000200 = 80070000 ecx = 003 has 0038 edx = 00000000 esi = 00000464 edi = 00000000
  EIP = 7c8285ec esp = 00f1a410 ebp = 00f1a480 iopl = 0 nv in EI ng nz cy ac pe
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000297
  Failed to load image C:\WINDOWS\system32\ntdll.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntdll.dll
  ERROR: Module load completed but symbols can be loaded for ntdll.dll
  ntdll + 0x285ec:
  C3 7c8285ec ret

  Any help would be appreciated more

  Colin

  Support for Windows Server is available here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  The forum, you are now aims to help users of the computer at home.

• Windows Server 2003 and MSXML 6.0

  I need to install MSOffice 2010 on a server that is running Windows Server 2003 SP2, unfortunately I encounter the error:

  The installation program is unable to act because of the following error:

  The installation of MSOFfice 2010 requires MSXML version 6.10.1129.0 to be installed on your computer.  Install this component and restart the installation.

  Fairly straightforward error message, I have so from Microsoft Core XML Services (MSXML) 6.0 Service Pack 1 and went to install this.

  Unfortunately, I encountered a problem when trying to install MSXML6.0, which is:

  This installation package is not supported by this processor type, contact your product provider.

  I guess I'm trying to use an incorrect version of the MSI, but I can't seem to find anything other than:

  msxml6_ia64.msi

  msxml6_x64.msi

  msxml6_x86.msi

  Who all seem to not what I'm looking for, I tried google MSXML 32 bit but without much luck.

  I was wondering if thing exists or if anyone has any advice that could help me please?

  Thank you very much for looking.

  Kind regards.

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Office 2010 - planning, deployment and compatibility TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Error when running bugchecker on Server 2003

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\WINDOWS\Minidump\Mini011213-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available
  ATTENTION: Inaccessible path: "ImagePath".
  ATTENTION: Inaccessible path: "SymbolPath.
  Symbol search path is: SymbolPath
  Executable search path is: ImagePath
  Cannot load the image \WINDOWS\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Windows Server 2003 Kernel Version 3790 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: LanManNt, suite: TerminalServer SingleUserTS
  Computer name:
  Core = 0 x 80800000 PsLoadedModuleList = 0x808af9c8
  The debugging session: Sat Jan 12 14:01:46.567 2013 (UTC + 0:00)
  System Uptime: 1 day 8:09:55.076
  Cannot load the image \WINDOWS\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Loading the kernel symbols
  ...............................................................
  ......................................................
  Loading user symbols
  Loading unloaded module list
  ..
  Cannot load the image \SystemRoot\system32\DRIVERS\cpqteam.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for cpqteam.sys
  ERROR: Module load completed but symbols can be loaded for cpqteam.sys
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {b13fe590, d0000002, 0, b9f41e27}
  The kernel symbols are FALSE. Correct symbols to do the analysis.
  WARNING: Unable to verify timestamp for NDIS.sys
  ERROR: Module load completed but symbols can be loaded for NDIS.sys
  WARNING: Unable to verify timestamp for tcpip.sys
  ERROR: Module load completed but symbols can be loaded for tcpip.sys
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt
  !_KPRCB                                     ***
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! KPRCB                                      ***
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt
  !_KPRCB                                     ***
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt
  ! KPRCB                                      ***
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt
  !_KPRCB                                     ***
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt
  ! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  WARNING: Unable to verify timestamp for q57xp32.sys
  ERROR: Module load completed but symbols can be loaded for q57xp32.sys
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt
  !_KPRCB                                     ***
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  Probably caused by: cpqteam.sys (cpqteam + 5e27)
  Follow-up: MachineOwner

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/