BOOTMGR is missing on the windows xp usb installation

Similar Questions

• the Windows 7 usb Installer may not work on the usb port 3

  Windows 7 install usb does not work on the usb port 3 with 32 GB usb 3 keys, says he needs a cd/dvd driver?

  but there is no cd drive in this machine.
  Works very well with an old USB 2 on usb 2 & usb ports 3 in the same machine.
  But no usb 3 key into a usb port 3?
  any ideas?

  Thanks anyway JW stuart.

  I managed to find a way to do it, I needed to set the usb drivers 3 unzipped on a 2nd USB on usb port 2 to use when the Setup program has been started and lost the USB 3.
  the ol F6 trick always works with win 7 and is more flexible, now that it allows pilots more than just raid.

• Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  original title: missing file

  Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  I tried to start - run with my c/d operating system

  I checked for viruses

  I purchase software to remove etc and REG files.

  Now that the devil do?

  Thank you

  If this

  I tried to start - run with my c/d operating system

  means that you have tried to use sfc/scannow from start > run, your experience is not surprising.  This 'solution' is often suggested by people who don't really understand what this command does.  It does not help to restore a missing rundll32.exe file.

  For what is

  I checked for viruses

  What is the name and version of your anti-virus application?  When (approximately) their subscription expires? What other antimalware applications installed?  What other antimalware applications you used recently to scan your computer?

  If you have not yet used the "software to remove the REG files and etc." return for refund or throw it out.  "Registry cleaners", 'tuners', etc. are not useful.  If you used to "clean" the registry, use its "undo" feature (if it has one) to restore the registry.  Longtime MS MVP PA Bear:

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  What probably happened is that your antivirus application deleted or quarantined in your file rundll32.exe thinking he was infected.  He could have, but probably not.  In any case, read the post that begins, "That 'solution' is not on my list." in the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/systemrundllexe-not-found/6e30aff2-a88e-4d86-a654-753d54f632d1 you can also read the rest of the posts in this thread.

  Note that c:\windows\system32\dllcache is a hidden folder, but you who type in the address bar of Windows Explorer (or copy and paste), the folder should open anyway.

  Assuming you manage to restore rundll32.exe, download, install, update and run full scans (not at the same time) with each of the following free tools.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• How to get the Windows 7 USB/DVD download tool to recognize a file bootsect on my XP 32 bit machine, if I bought Windows 7 64 bit?

  Title says it all. I scoured the internet for an answer.

  I bought Windows 7 Professional Upgrade with the discount for students. I downloaded the file .iso image 64 bit on my account "Downloads + product keys." I also downloaded Windows 7 USB/DVD download tool to make a USB bootable for Windows 7. I ran the utility and everything worked well, but at the end of step 4, I received the message "files copied successfully. However, we were able to run bootsect to make the USB drive bootable. If you need help bootsect... blah blah blah. »

  I went looking for answers and I found the troubleshooting for the show here: http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool#ms_help_topics_at0
  Next to Windows 7, step 3 says "is there an"additional download options"drop-down list."
  I had that day, but then this:
  Step 4: "in the drop-down menu, select"32-bit ISO." »
  This is not possible, because I bought the 64 bit version of Windows 7. All I see are the 64-bit .iso and .exe.
  I tried searching through Microsoft answers and found that many other people had this problem. I tried all of the suggestions for workarounds in this thread. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/problem-using-Win7-usbdvd-download-tool-concerning/37eadf15-85DD-4e56-A89C-fa0a3339b92e
  The only solution I have tried was downloading the file bootsect from one source other than Microsoft.
  Is it seriously the only way to make it work? To download a BOOTSECT FILE from an UNTRUSTED SOURCE? Come on, Microsoft.

  If you purchased Windows 7 since the MS Store:

  When you create a bootable USB device, I get an error on bootsect
  To make the USB bootable, you must run a tool called bootsect.exe. In some cases, this tool must be downloaded from your Microsoft Store account. This can happen if you try to create a USB bootable 64-bit from 32-bit version of Windows. To download bootsect:

  1. Sign in to your Microsoft Store account to view your purchase history
  2. Search for your purchase of Windows 7.
  3. Next to Windows 7, there is a drop-down list "additional download options.
  4. In the drop-down menu, select "32-bit ISO."
  5. Right-click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).
  6. Once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  If you didn't buy Windows 7 since the MS Store:

  Follow these instructions to work around the bootsect error:

  a. download and install the Windows 7 USB/DVD Download Tool program, as described on theMicrosoft Store website.

  b. download a working version of 32-bit bootsect.exe . Here is a link to the 32 bit bootsect.exe:

  bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  c. Once downloaded, copy the BootSect.exe file in the same folder that contains the file ofWindows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory isC:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  d. application of the Windows 7 USB/DVD download tool as described on theMicrosoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• BOOTMGR is missing and 0 windows installation

  I have a LG R380 laptop with 3 GB of RAM and 320 disc. I tried to update for Windows 7, however, while it was extracted files on win7 DVD, he says the missing files and it has restarted and this time it said BOOTMGR is missing. When I try to reinstall win7 it does not enough space, even if I have 286 GB free. When I run bootrec/rebuildbcd it says windows installation 0. can someone help me please on the subject?

  Hello

  read this

  Upgrade Advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  the system configuration required

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  and transfer your question in the correct windows 7 forums

  Here is the vista forums

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• BOOTMGR is Missing After the factory restore

  Hello

  I have a netbook with Windows XP as its OS S10e, I decided to restore it to the factory setting by pressing F11, after completing, it restarts and automatically install something and rebooted again, then this message appeared: BOOTMGR is Missing, press Ctrl + Alt + Delete to restart.

  Again, restoration, but the result was the same.
  My netbook has not had any CD backup

  What can I do?

  Thank you all,

  Unfortunately, all the proposed solutions did not work, I cannot restore my netbook and installed the new OS!

  Good bye

• All the addon icons are missing in the window customize

  I use FF 3.6.18 on XP, Vista and Win7. Given that FF itself upgrade 3.6.18, Miss all kinds of icons of the addon. Needless to say most of the addons cannot work unless that icon there to click. When I went to the [toolbar Customize] window to drag the icons réécrirait tool/menu/status bars, I find that ALL my icons missing addon. The FF default icons are there, but all the addon icons are missing. I've seen a lot of messages from people with the same problem as FF4 running, but it is not only a problem with version 4. Most of the answers provided were advised going to the window to customize and dragging that icons back out - obviously written by people who have not been read the question very carefully. Others recommend clicking the [restore default icons] button. They did not read the question with much attention either. I have this problem on my PC, those running XP, Vista and 7. Yes, I already ran ladies of virus and spyware, and that has not helped one of my PCs. reinstall the addons is no help either. Since the problem is on all of my PCs in various operating systems and upgraded to FF4 seems to make things worse, it looks like a bug in FF. Most of my friends who use Firefox have the same problem. It is a bug, or is it repairable? Does anyone know how to solve this?

  After, with great difficulty, eliminating the motor leads from my system, I tried half a dozen other things, but ultimately never gave up is fixed without wiping my hard drive clean. However, the latest update of Firefox (3.6.24) solved the problem! on all my computers! Don't know what you people at Mozilla has done, but thank you, thank you, thank you. No idea what caused the problem, or what fixed it, but it's a happy camper now.

• Symbols up and down a page missing in the Windows Live Mail Inbox.

  Original title: Administrator

  On the right side of my Inbox Windows Live Page up-down symbols are missing.  Why?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you to repair Windows live mail as its corruption could be the cause of your problem.

  We recommend that you try to repair Windows Live Mail to check if this solves the problem. Before you repair Windows Live Mail, you can back up your files to ensure that you don't lose one of them. You can click this link to find out how to make a backup of your files.

  Once your files have been backed up, you can then follow the steps below to fix Windows Live Mail.

  1. Press the Windows key + X, select Control Panel from the list.
  2. Click programs, click uninstall a program.
  3. Find Windows Essentials.
  4. Right-click on Windows Essentials and click Uninstall/Change.
     A window will appear asking to delete or repair Windows Essentials.
  5. Choose to repair all program Windows Essentials.

  If the repair doesn't work, then we recommend that you uninstall and then reinstall Windows Live Mail. You can follow the same steps as above but choose Remove instead of repair. You can visit this link where you can download a new copy of Windows Live Mail.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Where to go to set the channel missing from the Windows Media Center Program Guide

  Hi people,

  Hoping that someone like Barb Bowman (or a person with any with any part of the Windows Media Center team still it exists) can help me with this.  I'm missing a channel in my programming.  His 668 (Discovery HD) channel, and my program guide is for Seattle, Comcast King County South (digital). I spoke with Comcast, with Ceton Corp (manufacturing of my digital cable tuner card) and with Zap2it (info guide provider program for WMC).  All of them confirm what a) 668 is in my registration, b) 668 is tunable my card, and c) 668 announces are included in the current program guide data from Zap2it.  My data to guide program is also completely updated according to WMC. Zap2it has suggested that I use this site to submit the question to Microsoft:

  https://connect.Microsoft.com/site1145

  I saw other, older messages in this community to refer people to this website as well.  Well, whatever used to be here for your comments seems to have been taken down.  I can connect, I can click on the link «Studies», but the surveys page lists no surveys underway or completed.

  Will there be a new favorite way to indicate this type of problem?  Please help me to connect with the right resources at Microsoft to resolve this issue.

  Thank you!

  -Phil

  On Monday, may 5, 2014 20:58:24 + 0000, PPankow wrote:
   
  | I've seen other messages, seniors in this community, directing people to this
  website as well.  Well, whatever used to be here for your comments appears
  was taken down.  I can connect, I can click on the link «Studies», but the
  Surveys page does list no ongoing or completed surveys.
   
   
  Select your comments, no investigations, then submit new comments using the feedback button.
   
   
   
  __________________________________________________________________________________________________
  Barb
   
  MVP Windows Entertainment and connected home
   
  My Blog - http://digitalmediaphile.com/
   
  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298
   
   
  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7
   
   
   
  Please mark as answer if that answers your question
   
   
   

• Presentation settings is missing from the Windows Mobility Center

  Satellite L 300 with Vista Home Basic

  Recently installed everything, but have run windows update etc. Since then.

  Presentation settings does not appear in the Windows Mobility Center, and I can not find presentationsettings.exe anywhere on the computer.

  Have tried downloading VAP but no difference. Toshiba Assist has nothing to help me, I think.

  I tried looking for drivers and utilities for the L300 and sees nothing to help me - no presentation or power related only downloads.

  How can I get the presentation settings? The main problem I have is not to want the screen empties when you watch a DVD or streaming video. Even if you put windows power settings to never turn off the screen, it will still blank after a period of time without the intervention of the physical user, despite the video game.

  AFAIK this option is always available when the laptop is preinstalled with Toshiba (factory State) recovery image.
  You install own OS or what?

  I have two Toshiba laptops, and both of them have this option in the Windows Mobility Center.

• Envy 15 - sticker missing with the Windows key

  Where is the Windows product key sticker?

  I looked under the battery.  Open service Bay to watch under the hard drive and look at the back of the Bay door.

  Hello

  If you purchased a machine shipped with Windows 8, there is no COA label as the product activation key is integrated in the chip of the bios - see the article on the following link.

  http://reviews.CNET.com/8301-33642_7-57554240-292/Windows-8-moves-to-BIOS-based-product-keys/

  You can still read her entry in the registry key, using an application such as the example below.

  http://www.Belarc.com/free_download.html

  Kind regards

  DP - K

• Telnet is missing from the Windows features in Windows 7

  I wanted to use telnet.  I went to the command prompt and enter the name of the telnet server.  He received a message indicating that it does not recognize the telnet command.  I thought that it had to be turned on in Windows (features) components.  I went to the Control Panel, get the programs, and then turn on or off Windows features enable.  Completely empty the box that opens.   There is no options to check or uncheck.  It is completely empty.  How can I get the Windows features in there?

  Concord wrote:
  > I tried to use telnet. I went to the command prompt and enter telnet
  > servername. He received a messege indicating that it has not identified the telnet
  > command. I thought he must be turned on in Windows components
  > (Features). I went to control panel, download programs and select Activate Windows
  > features on or off. Completely empty the box that opens. There is zero
  > options to check or uncheck. It is completely empty. How can I get the windows
  > Features in there?
   
   
  Windows 7 support:
   
  By default, Telnet is not installed with Windows, but you can install it
  by following the steps below.
   
  To install the Telnet Client
  Click the Start button, select Control Panel and then click programs.
   
  Under programs and features, click Turn Windows features turn on or off. If
  you are prompted for an administrator password or confirmation, type the
  password or provide confirmation.
   
  In the Windows features dialog box, select the Telnet Client check box.
   
  Click OK. The installation may take several minutes.
   
   
  --
   
  Bruce Chambers
   
  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html
   
  http://support.Microsoft.com/default.aspx/KB/555375
   
  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin
   
  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
   
  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot
   

• Windows 7 USB installation only boots in recovery

  Thanks in advance to those who help.

  Like most people, I bought a computer with windows 8, to learn that I hate it.

  I have a real Windows CD on a USB key (the CD was almost broken.) And I used it for awhile, but my only problem is that since I used it to repair the windows vista on my old PC, it starts only in this black screen with the selection of the BONE, and or options work. There is no way that I know how to start the installation of windows 7.

  Like I said, thank you in advance.

  Tuesday, February 10, 2015, 02:03:41 + 0000, Jack E. Ashton wrote:

  And in response to Ken Blake, Yes, I know that windows 8 has a desktop computer.

  Ok.

  I used it for awhile. But he assured my very slow computer

  I can't tell you why this is the case on your computer, but is not
  my experience at all.

  and a whole bunch of my applications do not work on it, even after

  And this is not my experience.

  run in compatibility mode, I still get the same errors. In my opinion, I think that Windows 8 is very imperfect. In addition, most of my drivers does not work on the computer, on which I'm trying to install the drivers.

  And my third 'not my experience.'

• Insert the Windows recovery or installation media to continue - Windows 8

  I tried to reset my Windows 8 Asus SonicMaster S300c for a few days. It was installed with a Windows 8 operating system and had been upgraded to Windows 8. 1. I tried to use the update, reset and various other techniques found on the web that offers workarounds for this situation.

  Having none of them does not work for me, I created an image of USB flash drive recovery, entered the box boot UEFI and loaded the prompt orders and formatted the disk C: (OS disk).  I do not touch or change hidden partitions.

  However, now that I'm booting from the disc Sandisk UEFI (my USB key), I get to the window 'Reset your PC' where he tells me to "insert the installer or Windows recovery media to continue.  Of course, I have my recovery media inserted, the system can choose from two places, the hidden or the USB drive.

  I tried to restore the USB key and the hidden partition and none worked.  What can I do to retrieve Windows 8/8.1 on my computer.  (And it is possible to install Windows 10 on this laptop?)

  I finally solve my problem.  I had to use a combination of various pages and links and articles help to help me sort.  Ranging from the Dism to using CDBurnerXP and RUFUS DiskPart.

  I wrote my experience with, hopefully sufficient instructions for a person to get there installed system.

  http://www.eightforums.com/installation-setup/72015-Windows-8-installation-various-errors.html#post529594

• During the Installation Fusion 8 found the Win 10 USB installation disk?

  I try to install fusion 8 on a MBP (mid-2015) using OS X El Capitan v 10.11 to install Win10 as a guest of a newly purchased Home 10 Windows USB version.

  When I inserted the USB dongle asked me if I wanted to install in Mac or Win 10. I responded to win 10?

  I didn't insert the USB stick to the USB port of the computer before the time ran (again, I don't have no installation instructions) and showed the following screen:

  

  Then with the inserted USB dongle, I have tried re installing by choosing < enter >

  I get the same message.

  Is it possible to get the program to recognize Win10 program and install it?

  I can't check the startup disk in the Virtual Machine settings because I don't know where they are.

  One let Fusion8 make the partition that has been chosen in 60 GB and then install the Windows operating system?

  and there at - it installation instructions for this process? The reason why I ask is that I'm afraid to do the wrong thing so I read the language with a lot of attention and it progresses slowly. I prefer to read and know what to expect and make all my decisions NOT covered by the gun so to speak.

  I just bought they software yesterday, have I not support phone for help if necessary installation or is - this all pay off in the incident?

  Thanks for any help,

  LilBang

  Refer to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1015406

  To use Apple disk utility integrated to create a .cdr image of the Setup disk:

  1. Use the Finder to launch disk utility (located in /Applications/Utilities ).
  2. Insert the Windows installation disc.
  3. In the left column, click the Apple Super drive, and then click New Image.
  4. In the drop-down menu, select CD/DVD Master.
  5. Take note of where the document is saved, and then click Save. The CD/DVD starts converting. This can take several minutes depending on the size of the disk. A progress indicator displays the progress.
  6. When the process is complete, quit disk utility.

  Then follow below KB to install your Windows 10.

  VMware KB: Installation of Windows in a virtual machine using VMware Fusion Easy Install