During the Installation Fusion 8 found the Win 10 USB installation disk?

Similar Questions

• Vista Business 64 running Lightroom 2.0 cannot remove the FreeAgent Go USB external disk images

  I use an external drive FreeAgent Go USB for image storage. I have a XP machine who has no problem using Adobe Lightroom 2.0 for the deletion of images in the reader.  When I use my laptop with Vista Business 64 and run the same scenario with Lightroom to remove images, I don't want to, I get an error that does not allow me to delete.  I can download them to the desktop from the laptop and I'll be able to delete them then, but not directly from the external hard drive.  Is there a way I can do this using my Vista based computer laptop, or what I always switch the drive to my XP to achieve?  Thanks for your help.

  This error message only your getting EXACTLY (Word for Word)?  Have you checked the Vista Compatibility Center to make sure that Lightroom 2.0 and the FReeAgent Go USB drive are compatible with 64-bit Vista http://www.microsoft.com/windows/compatibility/windows-vista/Search.aspx?type=Hardware&s=FreeAgnet%20Go&page=2.  I could find several FreeAgent Go drives (I'm not sure you have) and all I saw were compatible, but I couldn't find Lightroom 2.0 (so maybe that's the problem - simply because that isn't on the list doesn't mean it is not compatible - only that is has not been tested and that often means it can be a problem).

  Have your tried using the standard Windows Explorer to erase the images of the player?  That work, or is it a problem there too?  If Windows Explorer cannot delete images, then try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  I know you prefer to use Lifghtroom, but I am trying to determine if it is possible that the Vista computer delete files from the external HARD drive without using Lightroom to see if the problem is with Vista or Lightroom.

  I hope this helps.  Let me know how it goes and what these error messages.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MP3 corruption during the copy to USB or playing with MP11

  Bought a cheap good car 16g off ebay.  No brand name.  To use in the car to listen to music (we have a new sienna with USB socket)
   
  Has started moving the MP3s to it, a bunch of files
   
  Found that at a given time, a file will not play with media player.  Therefore, no new file (copied to USB) after bad, would play.  Does any kind of codec error.  If I delete bad and try to copy it, he would not play.
   
  So I format USB and start over.  It happens again, with different files.  I do this a few times
   
  Finally, I find that media player is changing the file to be unplayable.  I tried to open one with media player classic and it works, but then, open the file with the current media player, I get the error, and it's more playable by classic.  After the file fails, the media info, artist, album, ect, is gone, but the name and size remain.  Size looks normal, but the image of the album no longer appears on the file manager.
   
  After testing more far, I see some files do not survive to the copy.  Others survive the copy, but media player is their in.  Error always the same on these files.  I can copy back them and replace, and sometimes they are OK, then other times they need a another copy and replace.  In all cases, the album art has disappeared.
   
  I found that if I delete one of these files, the next time I copy, it seems good, but is damaged if I play with media player.  Media player classic it plays very well and does not alter it.
   
  So, in summary, I'm sure only a few things
   
  Symptoms of a bad file is that it won't play in anything whatsoever, says he needs of codec, and I have more music as album info and others.  Such a file can occur after copying on USB key, or the first time, it is played with the current media player (media player helps says it's common when I ask for update).
   
  Some files do not copy right.  I can copy back them and they're right.  However, sometimes they lack the album image in the file manager.  No correlation with the existence of this image, and if the media player will be trash.
   
  Some of the files when they are played with media player go corrupt and will play is classic.  I have copy and I can play the recopied with media player classic, but try media player and it will be corrupted again.  The original copy of the copied file will play well with media player out of the hard drive, but will go corrupt if played off of USB, however, if copied from the USB to the desktop, it will now play with media player, but the album cover will look smaller than the original hard disk.
   
  Currently, the problem is only with files that are on the USB drive.
   
  A lot of hiking here, but you have an idea of what is going on?
   
  I'm afraid that this media player will decide to begin to destroy ALL my mp3s.  I went Classic Media Player to be the default for MP3 player, but you still wonder what WTF.
   
  Or is it a kind of USB problem?  I did a full and several quick formats of USB.
   
  Any ideas?

  Hidyrwolf,

  It seems that there is a problem with the USB drive as the file copied from the USB to the computer plays very well and the problem occurs with files that reside on the disk.

  To check if the problem caused by the USB, I suggest that you plug the USB on the other computer and check if the problem persists.

  Alternatively, you can add the missing information to the media library of Windows media player.

  Add or edit media information in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-edit-media-information-in-Windows-Media-Player

  Where is my album art?

  http://Windows.Microsoft.com/en-us/Windows-Vista/wheres-my-album-art-fixing-song-titles-artist-names-and-more-in-Windows-Media-Player

   

  You can also try to update the Codecs on the computer and check if the problem persists.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ID3 tags to change during the transfer on USB

  When my iMac to transfer on a USB mp3 tracks, the ID3 tags are somehow get reversed. My car stereo then displays the correct track number, but plays and the false name of audio and the railway. In this particular case, I try to transfer an audiobook with 66 chapters. I named the files 001, 002, etc. in order to read in the correct order. ID3 tags are named Chapter 1, Chapter 2, etc. I can't understand why so, when read in my car, it will show track 001, but read the audio Chapter 4 and show Chapter 4. The funny thing is, does it only on my Mac. If I transfer files from my Mac to work they correctly and display all the correct information. I tried to copy from iTunes and from the finder directly and pass the ID3 info in both directions; They even produce different results, but both are mixed up. Any help would be much appreciated. Thank you!

  I don't know how to copy the files on your player could possibly change the iD3 tags.  They are part of the file, and it would be like saying take a book on a shelf and put it in a box caused some pages from the book to the book.  Are you sure that the track numbers you see are the real file names?  I think the most likely is despite the naming convention of the file that you are using your player somehow files out of use.  I imagine that you have provided the correct order in the track number and if there are a number of disk that it conforms to the order you want too.

• During the compression of an entire disk in XP, combine multiple files to single-sector?

  I'm curious about the similarities of compressing an entire disk works in xp-Edition family versus how a unit with compression used to work in older versions of Windows like ME, 98, etc... I'm talking about how in older versions, Windows would give a specific amount of disk space and then would butt beginning of the right to one single file at the end of another. It seems to me that it is not good to compress the files in single-sector with the family xp Edition because they will still use a file area, or that is incorrect? If they are correct, then when you compress an entire drive with xp-Home Edition, then work just like the older versions?

  Thank you

  Hello

  You can see the links below for more information on the compression of a drive in Windows XP.

  Overview of file compression

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ff_file_compress_overview.mspx?mfr=true

  The use of the Compression of files in Windows XP

  http://support.Microsoft.com/kb/307987

• My DVD burner has crashed during the creation of media recovery disks.

  HP Pavilion p7 - 1269c using Windows 7 Home premium desktop PC. How to reset the creation process so the Recovery Manager will allow me to start over again?

  As far as I know, you don't reset the creative process. If the HP Recovery Manager thinks that he has created a set of discs, it's done. Please contact HP and ask for a free set of disks. Explain your situation to them.

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• Get the error during the installation of Oracle Fusion Middleware 11 g

  Dear all,

  I'm installing Oracle Fusion Middleware 11 g forms and reports in my windows 7 64 bit. Suite error below has been provisioned to the installation location.

  

  Please help me how to solve this problem.

  Kind regards

  Atif Zafar

  As Salamu Asalam are Atef,

  During the installation of weblogic server (WLS), home of Middleware is created.  My dough to this mistake, it's that you does not have the correct version of weblogic FIRST before installing the forms and reports. Then, u MUST specify THE SAME directory Middleware where wls is created after a successful installation.

  For more details, pls, review the steps http://docs.oracle.com/cd/E38115_01/doc.111210/e23960/install.htm#FRINS252

  Amatu Allah.

• I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  I bought from amazon lightroom 6 and I have win7 pro 64-bit and during the installation message appears OS not not met requirment win VISTA NOT supported

  See the link below:

  https://forums.Adobe.com/thread/1836232

  The folder Lightroom 6.

  Right-click on Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.

• I am trying to install itunes 9 on windows vista. Get error message - error occurred during the installation of Assembly political 8.0.microsoft.vc80.CRT, type version 8.0.50727.403 win 31 policy publicketoken = process 1fc8b3b901e18e3b = x 86 architectur

  try to install itunes 9, get error message - error occurred during the installation of the political Assembly 8.0.microsoft.vc80.CRT, version 8.0 (see above). Am able to install quicktime OK. I uninstalled itunes and quicktime, cleaned the installer, deleted the users temp directory and restarted several times - always get the same error and does not support network for apple, install

  Hello. It worked for me:

  1. download and install 7 - zip;
  2 right-click the iTunesSetup.exe icon and choose 7-zip > 'excerpt from iTunes\ ";
  3. then double-click AppleApplicationSupport.msi and install;
  4 install everything except iTunes;
  5. install iTunes;
  5. it must be .

• Could not load the PES 11 on computer refurbished (Win-7) - get message "the installation process has encountered an error during the installation of the shared technolgies. If please restart your system and try again. "- After the restart still the same

  PSE - 11 on computer given to nine (w-7) Impossible to load her get message "the installation process has encountered an error so that during the installation of the shared technologies. Please restart your system and try again".  Done it several times and still the same message. How to install correctly?

  Thanks in advance.

  http://forums.Adobe.com/message/5982666#5982666