Box state to read option after another event of the listener

Similar Questions

• Hi there is a box keeps coming up saying that another computer has the same IP as mine? What does that mean. ??

  A box is constantly on my computer screen saying that another computer has the same IP as mine and I need to contact windows for help.  What this means please.

  Thank you Michelle.

  The error means exactly what it says: there is another PC on your LAN that has the same IP as the PC you are using.  If you're in a work environment, speak to your personal network.

• Small problem with the events of the listener

  I have a small interface with 5 radio buttons and a buttonfield and when i click buttonfield I create an event. all this works fine, but when I want to go back to the previous page I see pop up with 3 had to 'save, ignore, reject' and when I click on one of them I create a duplicate of the trial before.

  How can I go to the previous page without showing the pop-up with 3 coiches and without creating duplicate event?

  It's the listener code

  FieldChangeListener listener = new FieldChangeListener() {}
        
  ' Public Sub fieldChanged (field field, int context) {}
   
  {if (delivery. IsSelected())}
                             
  Time zone tz = TimeZone.getTimeZone ("GMT"); We want the time gmt
  Calendar gc = Calendar.getInstance (tz);  It gives the time date and gmt
                   
  int ore = gc.get (Calendar.HOUR_OF_DAY);
  int min = gc.get (Calendar.MINUTE);
  s int = gc.get (Calendar.SECOND);
                   
  Co co = new coordinate (longitude, latitude, ore, min, sec, 9, "Delivered");
  CoorVect.addElement (co);
  Dialog.Inform ("send event");
                     
  } else {}
  {if (GuastoMeccanico.IsSelected ())}

  Time zone tz = TimeZone.getTimeZone ("GMT"); We want the time gmt
  Calendar gc = Calendar.getInstance (tz);  It gives the time date and gmt
                       
  int ore = gc.get (Calendar.HOUR_OF_DAY);
  int min = gc.get (Calendar.MINUTE);
  s int = gc.get (Calendar.SECOND);
                       
  Co co = new coordinate (longitude, latitude, ore, min, sec, 9, "Guasto Meccanico");
  CoorVect.addElement (co);
  Dialog.Inform ("send event");

  } else {}
  {if (IncidenteStradale.IsSelected ())}

  Time zone tz = TimeZone.getTimeZone ("GMT"); We want the time gmt
  Calendar gc = Calendar.getInstance (tz);  It gives the time date and gmt
                        
  int ore = gc.get (Calendar.HOUR_OF_DAY);
  int min = gc.get (Calendar.MINUTE);
  s int = gc.get (Calendar.SECOND);
                        
  Co co = new coordinate (longitude, latitude, ore, min, sec, 9, "Incident Stradale");
  CoorVect.addElement (co);
  Dialog.Inform ("send event");

  } else {}
  {if (LavoriInCorso.IsSelected ())}
                           
  Time zone tz = TimeZone.getTimeZone ("GMT"); We want the time gmt
  Calendar gc = Calendar.getInstance (tz);  It gives the time date and gmt
                         
  int ore = gc.get (Calendar.HOUR_OF_DAY);
  int min = gc.get (Calendar.MINUTE);
  s int = gc.get (Calendar.SECOND);
                         
  Co co = new coordinate (longitude, latitude, ore, min, sec, 9, "Works in Corso");
  CoorVect.addElement (co);
  Dialog.Inform ("send event");
  } else {}
  {if (SenzaConsegna.IsSelected ())}
                                        
  Time zone tz = TimeZone.getTimeZone ("GMT"); We want the time gmt
  Calendar gc = Calendar.getInstance (tz);  It gives the time date and gmt
                          
  int ore = gc.get (Calendar.HOUR_OF_DAY);
  int min = gc.get (Calendar.MINUTE);
  s int = gc.get (Calendar.SECOND);
                          
  Co co = new coordinate (longitude, latitude, ore, min, sec, 9, "Not delivered");
  CoorVect.addElement (co);
  Dialog.Inform ("send event");

  } else {}
  Dialog.Inform ("Nessun elemento indication!");
  }
  }
  }
  }
  }
  }
  };

  Added on-screen, this code will replace the popup screen.

  I don't understand the second part of the question, that is to say the second invent.  Add this code and make sure that the popup is removed and then tell us if all your problems are solved.

  Also search the doc for this method in the object Screen to understand how it works.

  /*
  * Override to ignore the save/discard/Cancel dialog box
  */
  public boolean onSavePrompt() {}
  Returns true;
  }

• Structure of the event in the event structure

  Is it possible that I can have a structure of the event, which is in another structure of the event? When I run the code, I can't use other buttons. (See chart for details)

  

  Do not put the event structures in the structures of the event! There is never any reason to do so.

  Redefine architecture your code in a correct state machine.

  (By default, events lock the façade until the event ends and if you raise the event internal or external, first of all, the other event can never fire because the current event can never accomplish or is inaccessible by data stream.)

• Appeare photos and videos have disappeared to a destination and the memory card folder after a halt during the transfer.

  I was downloading photos and videos from a memory card to camera in a USB card reader. After that most of the photos and videos (about 245 to 249) have been downloaded, asked me to jump on the last bit. Now, no pictures appear in the folder where I kept them or on the memory card. I get an error message when I try to eject the card reader. How can I recover pictures, because this is my only copy?

  Hi JanetSmart,

  • Have you tried plugging the card on another computer to see if it works fine it?
  • What is the file format of the file 29?

  It could be a virus, I would also say that you download and run the latest Microsoft Security Scanner to scan the card and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Response so that we can better help you.

• post a custom event to trigger the listener

  Hi all:
  
  My project read resultset of a database table and a while loop I put the records in a cache one by one. I registered a listener with the cache, and when an insertion event occurs, the listener #entryInserted record the news record in a log file. Everything works very well.
  
  Now at the end of the while loop, I would like to post (send or fire) an event on measurement (including information like the total count) to the listener to say things, "that's all!" and the listener must react accordingly.
  
  Can we do with the APIs of consistency? If so, how?
  
  Thank you
  Johnny

  Hi Johnny,.

  Yes!

  See you soon,.
  NJ

• Read check box state

  Hi there: -.
  
  "I'm sorry this post a simple question, but I can find the answer in the guide online Dreamweaver, and I lost a lot of time trying to find the answer."
  I want to read the enabled checkbox and then given control state if true is returned to call the function 'A' or if false is returned call function 'B '.
  Based on what I found in the reference that I created a variable to capture the State of the checkbox as follows:
  
  function checkboxState()
  {
  checkState var = document.all.nameOfCheckbox.checked;
  If (checkState is true)
  {
  statements
  }
  on the other
  If (checkState is false)
  {
  statements
  }
  
  }
  
  The box is configured as follows:
  < name of entry = "nameOfCheckbox" type = "checkbox" onClick = "checkboxState ()" >
  
  This does not work and I do not know why. I was wondering if I set the box in a particular way, for example by using the value attribute or something, but the reference does not indicate this.
  
  If anyone can help, I'd appreciate it.
  Thank you!
  

  Hi Jules,.
  Thanks for the tip. It worked. I've seen people set up an if statement without any argument 'if (checkStatus)' but I understand very well the mechanics of what he does. (In other words, how a true or false value is passed to the variable) But I learned THAT COBOL code originally then maybe I'm too old fashioned.
  Thank you
  Linda

• After a passage to the we modify the tnsnames address list or y at - it another option using TAF

  We have work on Oracle running on Oracle Linux 6.7 11.2.0.3.   We have the only non rac primary and secondary instance unique instance no cars. We have installation Application transparent failure (TAF) that works very well, we have created service, the triggers for changes of role and configuring the listener.  We have after tns

  TAFTEST =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (FAILOVER = ON)

  (LOAD_BALANCE = OFF)

  (ADDRESS = (PROTOCOL = TCP)(HOST = taf.one.us) (PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = taf.two.us) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = TAFTESTSERVICE)

  )

  )

  TAF - one is the main stream.  everything is good.  We do a failover and TAF does its job.  Select continue, sessions already open before the work of swtichover very well subsequently without errors.

  However, no meeting again fails with ORA-01033: ORACLE initialization or shutdown in progress since the taf-one-us is now not the day before the main.  If I manually modify the AMT so that taf - two.us is first then it works fine as it is now the main.

  We tried (LOAD_BALANCE = ON) 1/2, but by the time we get the same error since it randomly chooses the standby address.

  is this what we can add to the entrance of the AMT so that if the address of the 1st operation fails, it takes the second.  understanding is that it is the default behavior, but it doesn't work like that.   We do something wrong?  We followed the code in Re: TAF on 11g DataGuard with FSFO

  I think I found the cause and solution.

  After some research (for example https://docs.oracle.com/cd/B28359_01/server.111/b28294/role_management.htm), I found that there was an additional trigger.  Failovers undergo a transition of role. Therefore, a relaxation on the role changes to start and stop the service as needed.

  The following trigger

  create trigger WHENROLECHANGE after DB_ROLE_CHANGE ON DATABASE
  declare
  v_role varchar (30);
  Start
  Select database_role in the v_role of the v database $;
  If v_role = "PRIMARY" then
  DBMS_SERVICE. START_SERVICE ('drrpt');
  on the other
  DBMS_SERVICE. STOP_SERVICE ('drrpt');
  end if;
  end;
  /

  now makes the configuration of the work.  Selects existing continues to work to pick up where they were on the other server, existing connections continue to meet, and new connections go to the correct server without getting an error.  When we make him switch to return chooses to continue to work and new connections to connect to the appropriate server.

  Note that this is usually done for logical standby, but we need for physical too checksection 8.2.1 perform a failover of a physical database from the previous day

  Step 4 Verify that the goal of the digital switchover is ready to be switched to the primary role.

  Step 5 place yourself in the role of physical standby database target the main role.

  Run the following SQL statement on the basis of Eve physical target:

  SQL> ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY WITH SESSION SHUTDOWN;
  

  6. open the new primary database.

  SQL> ALTER DATABASE OPEN;
  

  Step 7 Start repeat if applied on the new information physical standby database.

  Note that there no restart of the previous day, triggering of start on not be triggered.  had he been restarted while this would have worked, since it was not we need the additional trigger for the role to change.

  Thank you all for your efforts and work.

• How can I reset my R7000 in the State in which I out took it of the box?

  How can I reset my R7000 in the State in which I out took it of the box? Why am I asking? The latest version of the firmware has destroyed the connectivity and performance of my router. I'll have to deal with the devices that can not connect, devices that fall, extremely poor performance, etc. It's just a disaster.

  I've been with Netgear 5-6 years and had to do something last night, I have never had to do before - I had to go back to an earlier version of the firmware. Honestly, very little worked well. The previous version of the software has a few hiccups here and there, but the new version is just a nightmare.

  Now that I have applied even if an earlier version of the firmware, I can still see some of the latest options which were not there before. I have taken note that the firmware was now the prior publication, but the GUI is still the current version.

  Just to give a time frame on my Nexus 5 running 802.11ac, prior to the current version, I could peg 90Mbps +. Since the new version, the best I can do standing right next to the router is 24Mpbs +. Even after the restoration of the previous firmware, the speed is always the same.

  So, I want to return the router to the shape that when I took it out of the box, apply the previous firmware and reset up if necessary. I want to just my router back prior to the most recent release that destroyed. Once again, that the release had a few hiccups, but it was still usable.

  The 30-30-30 reset method works on most routers out there, but not on the R7000...
  The correct way to reset your R7000 at the exit of the State of the box is...

  Download the original version of Netgear R7000 Support HP http://downloadcenter.netgear.com/en/product/R7000(Firmware Version 1.0.0.96)

  Reset and flash back of any Stockfirmware on the original Stockfirmware:

  Power on the router
  Wait a few seconds
  Press Reset for 5-8 seconds max! **
  connect to 192.168.1.1
  Flash the original FW
  now that the router restarts
  Wait a few seconds
  Press Reset for 5-8 seconds max! **

  * After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

  Now, it's as out of the Box.

  Reset and flash back to any DD - WRT FW to Stockfirmware initial:

  Power on the router
  Wait a few seconds
  Telnet to the router
  Run the commands:
  'clear the NVRAM '.
  'reboot '.
  Wait a few seconds
  connect to 192.168.1.1
  Flash the original Stockfirmware through the Administration tab (if the upgrade fails and the site is not available, try another browser such as Firefox, chrome, safari)
  now that the router restarts
  Wait a few seconds
  Press Reset for 5-8 seconds max! **

  * After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

  Now, it's as out of the Box.

  I have reflashed several R7000 to initial Stockfirmware as the last FW with Beamforming was not stable enough after several days/weeks testing... The FW showed massive connection drops after 24 hours and only a reboot of the router fixed it (tested on 3 x R7000)

  The connection has dropped from 1300 to 66-256 after several hours...-. -.

  Now I'm waiting a new FW version with corrections of Wifi of Netgear.

• Why "limit maximum instances of this event in the queue" in the dialog box change events?

  Why I "would limit the maximum instances of this event in the queue" in the dialog box change events?

  

  I think that this is new for LV 2014, but I couldn't find an explanation for an instance of good use. A research on OR displays only the 2014 help text, which explains what it does, but not why?

  Does anyone know good arguments to use this option?

  Thanks in advance.

  Justin Tyme

  

  It is useful for user interface elements that can enqueue actions as quickly as they can be made.

  For example, say it takes takes 1 second to take a picture and save it. The user presses the button "Take a photo", but they do not see a new image file again after a wait of 250 ms (human beings humans can be impatient) so they press twice. Finally, they see a new file image... and then another... and then another... To get rid of this possibility, check this box.

  Or that you have a cursor to adjust some settings. Moving the cursor updates very fast! If the user swipes from 0 to 1 then the program might try to send all the rest as a parameter to your instrument, which takes some time. Instead of sending all of these values, it is probably better if the software can keep up with the cursor and send a value of about 1 at the same time, the cursor said 1. If you do not check this box, the user can be 1, but the unit will continue to receive values from 0.53, 0.54, 0.55...

• Hear an album after another in the natural order

  In iTunes, there is an 'Album of the artist' option which allows me to listen to the tracks of each album in the natural order, one album after another. This seems not possible on my iPod Nano (6th). Does anyone have a suggestion? Classical music lover I find it confusing to have a concert mixed movements. BTW, there is a function to play all the tracks of all the photos in alphabetical order, but it's also discomforting

  Create a smart playlist that includes all the songs in your iTunes library.  I have a window Edit smart playlist list that looks like this

  

  This playlist has ALL your songs.  If this selection is too large to fit on your iPod nano, you can add additional rules to the smart, such as playlist

  Kind is classic  (all songs from the classical music should have entry kind of 'classical' music)

  The artist is [artist name] (create a separate smart playlist for each favorite artist)

  You can also use the points to Match only checked box, in order to limit the smart playlist of songs that are archived in the library.

  NOTE: You can use normal playlist instead and add songs manually.

  See the playlist in iTunes and use the sort order of the artist Album .  Set up synchronization for include the playlist.  If you synchronize library of ensemble music, it is included automatically.  Sync the iPod.  When you use your iPod, play songs in this playlist (with iPod a play in-order).

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Cannot transfer messages saved in the journal of the events with the 50 State

  I use Vista 64 on a HP laptop.   I don't have a Vista installation CD but have the cd hp the only way I can run CHKDSK with Windows running is to use the F8 key and select 'Repair your computer' then I get to the screen "System Recovery Options" and a "Command Prompt" option that I chose.  I can then enter "chkdsk" and it works, but after it runs I get an error "cannot transfer the recorded messages in the log of events with State 50 ' although he reported no problems with the disk.  It is this important error message and how do I get the chkdsk to write the information?

  I talked to HP and they tell me I have to reinstall the original software included with the computer to resolve this problem.

  Any help would be appreciated.
  Marshall

  Judd

  Thanks again for your information.  It seems that you agree with HP that the only way to solve this problem is to re - install the operating system.  This tells me that the re - install has a good chance to solve the problem.

  Best wishes
  Marshall

• Automatically populate a drop-down list by using another selection from the drop-down list box

  New java/preparation forms so I apologize in advance.

  I currently have a menu drop-down box 1 (Occupation) with three options: "enter your own description/blank", retired housewife. When someone chooses either retirement or anyone at home, I would another drop box 2 (employer) to assign automatically "n/a. . The employer drop box has only two options: "enter your own/blank", N/A.

  Far, I could for that box to fill but only when the person clicks in the box (as if they were about to enter their own text.) Then only it will fill the drop-down list "employer." I would like it auto fill once the person has chosen retired, Virgin or stay-at-home woman without having to enter in the box (just using the arrow to the size of the drop-down list box).

  I currently have a key shot that resets the employer box when a person chooses the option vacuum/enter your own option. I then a JavaScript (only for the housewife now) that only works if you click the box of. Key combination works I want to than the other options work as well. If the client settles on white, the choice of the employer updates automatically empty without having to click in the box of. Any help (including general advice to make my code cleaner) is very appreciated!

  Current script of typing:

  If {(event.willCommit)

  If (event.value == "") this.resetForm (["use"]); of other SetFieldValues (event.value);

  }

  The current upward, mice running JavaScript :

  var v = this.getField ("Occupation") .value

  If (v is "Housewife")

  1. this.getField("Employer").value = "N/a".

  I think maybe I should use event.willCommit in my formula, but I'm not sure how to include it.

  Thank you!

  I would not use the key sequence or MouseUp actions for this, but the action post.

  Just make sure that you set the field option to validate the selected value immediately (under Properties - Options) and then use this code as the custom validation script:

  var employerField = this.getField("Employer");
  if (event.value=="Homemaker" || event.value=="Retired")
      employerField.value = "N/A";
  else employerField.value = employerField.defaultValue;
  

• Need help with the error "read-only or another user may have open.

  Hi all

  just a background on what's going on. I do not have adobe acrobat x standard, the most recent version. I get an error everytime I try to edit a document.

  I add pages to PDF which is on my computer, it does not allow me to save the file after the addition of pages without giving me this error "the document would not be saved. The file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  I have to then save it in a separate file and delete the old and replace it with a new one. I'm having the same problem with the files on my server, and I thought at first it was only the files on my server but it does with files directly on my machine. Very frustrating and I cannot understand why.

  I tried to go in editing-> Preferences-> general-> under Application startup to disable "Enable protection mode", but the option is not there yet.

  Please help someone, I can't understand a solution for this.

  Thank you.

  !!!!!!!!!!!! Thank you!!!

  It drove me crazy!