Boxes of Dell Energy Smart Rack 4020 s / 4620 s

Similar Questions

• In the Windows Installer box - insert Dell network Assistance

  original title: Windows Installer box.

  Windows Installer box - message says:

  "The feature you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the disc "Dell network Assistance.

  I don't know which disk i.e. - any ideas.

  Occurs when I try to open MS Word or something in the office.

  WORKED FINE YESTERDAY

  Help

  Hello

  ·         This only happens when you use Office applications?

  Try to reinstall network of Dell since the Dell software came with the computer and check if this is useful.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell PowerEdge R730 Rack Server

  Dear support team, I need urgent help here...

  I have to have to Open Dell Management CD to install windows and I installed windows server 2012R2 without using the disk operating system that lead that now lack of drivers.

  So my question now is how to update the missing drivers from the CD, avoiding reinstall OS again because I already have the full installer for my applications...

  Waiting for your answer...
  Kind regards

  Solved by going to dell driver > chose my product and download and installed (Drivers-for-OS-Deployment_Application)

• Y at - it update Dell Capacity Planner or similar?

  Hello.  I searched for a calculator / planner that will tell me the power requirements of the Dell Poweredge 13 G rack of servers with various configurations.

  I found a copy of the DataCenter Capacity Planner to http://www.dell.com/html/us/products/rack_advisor_new/, that looks like exactly what I want, except that it lists only the old servers.

  Y at - it a more updated version of this somewhere?  Or he was replaced by another tool?

  Thanks for any help.

  (PS. I was going to make this post in the PowerEdge Rack HW forum, but for some reason that I can't create messages in this one).

  Hello.

  The tool you are looking for is called the Dell Energy Smart Solution Advisor (ESSA). See the link: www.dell.com/.../config_calculator. You will also find the Data Center Capacity Planner (DCCP) at the bottom of the same page.

• How do save about.config after change of smart bookmarks

  https://support.Mozilla.org/en-us/KB/restore-default-Smart-Bookmarks-folders

  This should do what is necessary, BUT the change is not saved when I go out. How to save the changes?

  Once Firefox treats the request, the preference will be changed again. The files reappear when you expect? If this isn't the case, it is possible that they moved in a subfolder. Unfortunately, it is difficult to find because the search box in the Library dialog box does not have Smart Bookmarks folders.

  But you can search for them in a backup of the HTML format. Here's how:

  (1) export bookmarks to a file in HTML format that you save to a convenient location, such as your desktop. See: Firefox bookmarks export to a HTML file for backup or transfer bookmarks

  (2) open the HTML in Firefox and you can use find (Ctrl + f) to search for the missing smart bookmarks folder. Then, you can open this location in the library and bring it back where it belongs.

  A little luck?

• Exclude specific 'face' of the smart album?

  Is it possible to create a smart album that includes pictures of several people (using 'faces'), but not pictures which may include a specific other person who may appear in some of these photos. For example, I would a smart album that includes all the photos of my brother, sister and parents (using 'faces'), but excludes all the photos that include the 1st wife of my brother.

  David

  I think that you'll just have to put in place of the rules in the process of creating smart albums.

  There is a rule for faces to create smart albums. You can use the "Add rule" button in the upper right of the dialog box to create a Smart Album. You will need to add a rule by individual faces. With faces, there is a 'is' and the option 'is not. The order could play a factor in the execution of the rules so try putting the old sis in law first or last. If all goes well, one of those who will work.

  Good luck

  PS. you might want to try first with a single inclusion and exclusion. If it works, continue to add more inclusions you govern together.

• Music app hangs when downloading the smart playlists

  Just turned on iTunes game and have my 35 000 songs in the cloud. When I click on the new button to cloud/download in 9.2 on my 6 s + or iPad crashes music application. I can load the songs and albums and playlists regularly, but not smart playlists.

  They affect something?

  I stumbled upon this question.

  That fixed it for me was disable the "Limit for XX Gb selected by random" check box in the edit smart playlist menu.

  I hope this helps.

• No sound icon by volume in the taskbar. Can not see the box in the Panel... areas are greyed out. has tried windows Fixit... does not solve the problem

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  "Thank God" Friday, December 31, 2010 11:40

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  Go to this page and download the drivers for your motherboard:

  http://www.ASUS.com/product.aspx?P_ID=szSFtrap7crpBaQE

  --

  Roy Smith
  Windows 7 Professional
  Postbox 2.1.0
  Tuesday, January 4, 2011 22:09:51

• Windows 7 OS disk for the Dell Inspiron new bought at Staples?

  I just bought a new Dell Inspiron 1545 at Staples this weekend.  Instructions and several responses from forum help, see using my drive operating system in the event of serious misconduct.  I note, however, that none of the disks that came with the computer seem to be my drive of the Windows 7 operating system.  He has been excluded erroneously, or is my Windows 7 operating system that is included in one of the following discs, & I didn't it?

  Here is what WAS in the box:

  * Dell Application - already installed on your computer: to reinstall the Dell Webcam Central software

  * Dell Application - already installed on your computer: to reinstall the software Cyberlink PowerDVD 8.2

  * Dell Drivers and Utilities - already installed on your computer: to reinstall Dell Inspiron and Dell Studio laptops software (content: device, Diagnostics and utilities drivers)

  * Dell Microsoft Works 9.0

  Is my Windows 7 (emergency) software anywhere on any of these discs?

  Thank you!  ~ Ashley

  When you buy a computer from a store, Windows disks are not included. The computer will have a utility that will allow you to create a recovery disk if you need it. If you have a question, I suggest that you contact Dell. Frenchie

• ESX hardware Choice - blades vs boxes Intel vs AMD FTW

  Guys-wanted to get your opinion on the material.  We currently have 5 of the DL380 G5 (they are becoming dogs BTW) and I need to prepare for growth in 2009-2010.  The following points:

  • I have only about 10U left in my current car at the co - lo and for recurrent cost issues I don't want to go to another booth in the near future.

  • Goal is to fill this 10U with best performance by U in the reasoning of cost

  • Everything is NFS, so don't worry about iSCSI HBA etc.

  • Blade architecture seems very appealing due to its density.  I can put in an IBM Bladecenter that would all the redundancy, management & switching in a package of tight 9U - Colocation of blades 10 I think.  But what about performance?

  • That these mega-wholesale Dell PowerEdge R905 Rack is possible with AMD Opteron & 48 GB of RAM?  They are a better option for VMware than blades?

  • How much more powerful are AMD chips to running ESX than Intel?  I'm a big guy AMD, I run em' at home and we all know the architecture of the FSB is cleaner than Intel. **

  p.s. DL380 are configured this way: 2 x xeon quad core @ 2.33Ghz - 32 GB of ram

  Affect your religion to break!

  See you soon,.

  Bart

  I'm working on a site with a range of materials, the older facilities are on PE6950, there is a VDI on R905 facility and a new migration environment being built on HP c7000 with BL685c G5 (full memory, Cisco/Brocade). All hosts are AMD either 82xx 83xx (Dual or Quad Core). We are working on the server of virtual machines migration of the blades HP 6950 on the newly built (and lightning quick).

  VDI on of the R905 is easily blockage on vcpu scheduling without complaints from the users performance rote, which gives us 128 sessions VDI by R905 (quad quads, 64 GB) we head to connection broker shortly.

  On the server we are on average 40 guests by 6950 and limited memory (8 cores, 32 GB of Ram)

  We are hoping to reach 90 guests by Bl685c, but are only in the construction phase and test with no complaints to date - in particular with minimal wiring required. My calculations suggest that 96 GB will be the sweet spot for memory installed to BL685s, although they can support 128 GB at great expense. This translates into a theoretical capacity of 600-700 VMS by chassis running between 128 cores, which is just huge for a such small piece of rack space.

  We went with AMD because at the time of the decision (many moons ago) their roadmap showed they would be stable on the new Barcelona for some time, so only intel or even to release the new set statement that would be compatibility likely vmotion - the wisdom here is definitely check the roadmaps on the cpu and server provider before committing.

  Also, don't neglect the benefits of integrated with your blades remote management; It's yet another extra expense on individual servers.

• Camera Raw / smart object?

  Using CS3
  Scenario:
  I turned 500 marriage images, sorted and retouched in bridge. Now, I'll look at each one in camera raw (at bridge) and make the necessary adjustments. I use CR and adjust / synchronize files similar whenever possible; zipping through the 500 images quickly and save without opening, then use the image processor to process all 500 images while I'm SLEEPING.
  Question:
  Is there a way to Turkey / process 500 images and have saved later when I open them, they open as smart objects. Now if necessary I can take the dynamic object, go back in camera raw and make changes / improvements.
  In Czech Republic, I know, I can check the box "open as a smart object", but that only seems to apply if I immediately open the file (or files), and then save them. It is not practical or feasible for select 500 files, open and save at the same time. If I save the Raw files to open later, (as in my workflow above) then it will not open as a smart object.
  I checked on the Adobe Exchange website, but did not find any scripts or actions that would facilitate.
  Anyone know if what I'm trying to do is possible and how?
  Thank you
  JeffN

  A quick fix would be to change the Image Processor script. If you add the line

  desc.putBoolean (stringIDToTypeID ('smartObject'), true);

  just before the line on 1546

  var returnDesc = executeAction (charIDToTypeID ('Opn'), desc, inDialogMode);

  TIFF and PSD files will be saved with the raw as a smart object layer file. Of course JPEG files will be always saved as usual.

• Auto dim/light on P2314H

  This monitor a Energy Smart option, that works weird in my opinion. It amplifies the light when the screen is white and darkens the screen when the screen is dark.

  Does this monitor have the auto brightness function? Where it auto-régler the brightness to the condition of the bathroom. In the morning I have to re - adjust the brightness to 75, while in the evening at 25. It may be a small task, but it is very annoying to do it every day.

  Valmighty

  What I need is for the monitor automatically set the brightness to 75 in the morning and in the evening 25 :)

  It's pretty simple. Windows Task Scheduler allows you to create a basic task to run the display manager Dell at 7:00 with the argument ' / SetBrightnessLevel 75 ' and another to perform RFM at 19:00 with the argument ' / SetBrightnessLevel 25 "."

• Play File.vi sound does not work in Windows 7 x 64 Ultimate, LV2009 SP1 x 64

  Hello

  For some reason any "Play Sound File.vi' in LabVIEW 2009 SP1 x 64 won't read my files .wav on Ultimate Windows 7 x 64.  It gives this error:

  LabVIEW:  (Hex 0x12C3) The sound driver or card does not support the desired operation.
  

  The exact same code works (it will play .wav files) with LabVIEW 2009 SP1 on Windows 7 Home Premium 32 x 32 x.

  Here are the results of the test cases I've tried so far:

  Box 1: Dell Precision T3400, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]

  Box 2: Dell Optiplex 755, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]

  Box 3: Lenovo X100E Netbook, Windows 7 x 32 Home Premium, LabVIEW 2009 SP1 x 32 [works]

  The "Beep.vi", however, works on all three machines.  Audio devices on all three machines work fine when used by other non-LabVIEW applications.

  I also tried several different .wav, including those stored in C:\Windows\Media files.  None of them breed in BT on the zone 1 or zone 2.

  The user account that I use still has privileges administrator on all 3 boxes.

  All this experience?  How can I fix it?  I tried to dig into "Beep.vi" to see if I could reuse all subvis, but Beep.vi is password protected.

  Thank you

  Richard

  I got the wav files to play by calling the PlaySound method contained in C:\Windows\System32\winmm.dll.

  Had to create a library function call and research, PlaySound interface.

  The VI is attached to this message.

• How can I turn it back on XP after the physical conversion to hyper-v

  I've used disk2vhd utility to convert an XP machine a .vhd.  I rode to a new virtual machine.  It starts fine, but when I did, he invites me to activate the copy of Windows.

  Two problems.  First, the device drivers have apparently not been installed, as well as the network does not work yet.  Activation over the internet is not possible.

  If I choose telephone activation, the automated system tells me that the code is not a valid MS product.  Yet, there is a sticker of genuine produuct on the side of the box from Dell.

  My only option is to stop right there.  Any suggestions?

  Have you actually tried Telephpone activation? -l'option is buit in XP

  However, as I said, it is useless if you do not have a valid license in the first place.

  If you * do * have a license valid, then try this...

  You might be able to solve your immediate problem of the 30-day activation grace period has expired by resetting it. Follow these steps:

  1. If the computer can be started in a safe mode command prompt, do.

  2. at the command prompt, type this command exactly (space, caps and comma are required):

  Rundll32.exe syssetup, SetupOobeBnk

  3. restart.

  If you did it, your activation grace period will have been reset, giving you more time to work on the problem.

• Can I control where is the audio output?

  I built in sound on my motherboard (Asus Socket 775 using Realtek Audio).  So many times I need to switch between the different audio outputs.  Surprisingly its very difficult to find an external box which accepts audio and can spend 2 or more outputs. Most of us use a helmet, then quality maybe, headphones and speakers a speaker, etc.  Most of us need at least 2 output audio.  In any case, I tried to connect my headset to the rear and side outputs and it sounded identical to the front channel output of channel 2, 4, 6 or 8 in the Realtek audio program.  Really identical.  I went repeatedly back and forth to make sure.  There was a small delay in the sound that passes through when I plugged in the rear (in mode 4 channels) and side (in mode channel 6 or 8).  But the sound itself was the same in all directions.

  Does anyone know why it would be the same?  Was it because it was coded in stereo?  Wouldn't the audio program Realtek tries to synthesize multichannel for the side and the rear channels?  Central/subwoofer channel was mono so that makes sense.  And the mic input works fine.

  If I could control what output I wanted to use I have a selection of 3 outputs (front, side and rear) to choose from.  Helmet quality, headset for chatting, and speakers.

  I realize many computers have outputs audio to the front and back but I don't use that nor do I have the header for this Panel.  I don't know if there is a provision to switch between front and rear exits.  If there was it would be a great addition.

  But as everyone knows, it's a pain to switch the outputs in Windows.  You must start sound in the Control Panel, go to Audio off the 5 tabs, choose which output desired, apply, OK.  I put the sound on a shortcut but its still a pain.  And there are often close the application using the audio output as well.  A mechanical switch could be fleeting and the right side of your keyboard or your mouse.  A volume on the same box control would be smarter.  There is always a delay when you adjust the sound in Windows that would be better avoided.  You could do the same for the microphone so he could be muted most of the time, then passed to the headset or a speaker application where you are a little ways away from your desk.  Software switching does just fine.

  Hello

  I suggest to browse the Internet using your favorite search engine and look for applications that perform the tasks you need.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.