Can I control where is the audio output?

Similar Questions

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• L50-A-11 t satellite - cannot set up the audio output

  Hello

  I have a Satellite L50-A-11 t with Win8.1, and I can't set it up to get the sound out of the speakears computer and the speakers connected to the audio output.

  The realteck controller does not show me almost any configuration option, is this normal?

  Mate sorry but the message isn't clear enough.
  What do you exactly do with Notepad and the speakers?
  You speak of internal or external stakeholders?

  The sound of s notebook (record and playback) can be configured in the control panel? sound. There, you will find the Read tab (lists all the devices as speakers, headphones) and tab (internal microphone, external microphone) record.

  You must mark the device as default device, if you want to use.

• Change the audio output default usb headset speaker 3000 Microsoft livecaht

  Yesterday, when I ran my Rosetta Stone language software that I heard noise coming from my newly installed Microsoft Live Chat 3000 USB headset, today, when I run the software, the microphone still works. But the sound comes through the speakers of the laptop. I looked through Windows and cannot find a place to tell windows to use the headphones to the audio output.

  I saw a similar problem on this site and followed the recommendation to remove the Chuck and download the latest driver on your part and re - install but still the sound comes through the computer speakers.

  Can my children re-configured something but he does not confess to it. But I do not understand why remove then re-loading the drivers does not work. I use Windows XP SP3 entirely under license and updates.

  I have them just a couple of days ago take their back and try something else?

  Thank you

  Try Control Panel, sound, properties, change the headset speakers, also, R.click

  the President of the clock opens, properties, adjust.

• Make crashes if the audio output selected

  Hello

  I'm having a problem with AE CS5. Whenever I try to make a video, it hangs on the first image and does not provide for as long as I selected audio. If I deselect the audio option in the output settings, then the video without hesitation. Audio works in the RAM Preview, however. I tried to export to AVI, WMV... no luck. Finally the error 'an output module no longer"appears.

  I am running Win 7, i7-820QM, 8 GB memory DDR3. I don't think that it is a hardware problem, but I don't really know the source of this problem either.

  If all goes well, there is an easy solution for this.

  Thank you

  Andrew

  Hey guys,.

  I was able to solve this problem. I'm not sure where the conflict is / was, somewhere, but here's what worked: I have created a different user account and shot to the top of AE. For some reason, the audio output module works perfectly on this account, and the audio preview RAM working more regularly on this account also. I do not uninstall any software or codecs suspicious right there. I'm not running that much more on my main account in relation to the other - can - be an antivirus or something similar - buy Hey, I'll take the same unexpected happy result. Thanks again.

  Andrew

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• T400 2765 T6u, vista 32 b which distorts the audio output on my videos

  My T400 has poor visual quality in images and videos a week ago.  After that I updated the graphics driver, images, photos and videos are ok now, but the laptop is to distort the audio output on my videos. Can someone help me with this problem?

  Thank you

  guoclu

  I updated my audio driver and bought another helmet and solved the problem.  I don't don't know why my previous headphones does not work for t400-, it works perfectly for my office.

• How can I change [frequency] on the audio spectrum?

  How can I change [frequency] on the audio spectrum? I really need an easy way to solve this problem

  After Effects has a very limited set of audio tools. Your only option to change the Equalization inside AE is to apply one of the equalizer and then before dialing the audio track that you use to the reader of the Audio spectrum. It's a little awkward, but it keeps all the controls inside the AE and keep them editable.

  Personally, if I want to isolate the frequencies I always use the hearing to create an audio layer duplicate that has been optimized for the effect that I need to generate audio.

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• How do we install the audio output device?

  How do we install the audio output device?

  Usually, plug you speakers or a connector into the line-out or speaker of your sound card. You may need to update your audio drivers to get all the features of the software. What sound card do you use? Built in or add on the map?

• Change the audio output to hdmi

  I have an hdmi cable connected between my HDTV and my dell xps m1330, I can get the video to transfer very well but can't do the sound of the game through television. I looked on the internet for how do to it and theres a lot of instructions for vista / w7, but I can not understand how to change the HDMI audio output in windows xp.

  Hi ccmcmill12,

  Follow the below mentioned steps and check the results:

  a. click on the button 'start '.

  b. click on 'control panel '.

  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.

  e. This will bring up a window titled "Sound".

  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  g. There should now be a checkmark on this option.

  h. the sound should play through your HDMI connections to the TV.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I pause and resume the analog output using DAQmx?

  I use a DAQ hardware to produce an analog waveform.  I would like simply to break the output of the wave and then resume where it left off.  I use DAQmx and LabVIEW 2011.

  I've seen examples that use a digital or analog break trigger, but I would take a break in the software only.  How can I do this?

  -Joe

  Hi Joe!

  I spent some time thinking about it and I realized that you can technically use a fundamental mission of the analog output, as you previously wrote that runs continuously. However, the generated output samples are controlled by the sample clock pulses, and can be manipulated to fit our needs "suspension."

  To do this, we will need another counter task that generates a pulse train (see our examples of shipping under material input and output > DAQmx > generating digital pulses > generate dig Pulse Train - Continuous.vi) that stops and starts the user to choose. This can be in another quite VI or controlled by software. We will use this as the task of our output sample clock.

  Then, the task of the AO, wire a constant to the sample clock source and select ' DevX/CtrXInternalOutput"based on the counter that you specified in the task of counter. You will need to choose "I/o name of filtration" and check the box that says "include advanced terminals' and right-click of the constant. See picture attached as a reference. In this way, the task of the AO is constantly running, but it generates only actually all data when the meter running task.

  

  Let me know if you have any questions!

  Have a great day!

• Is there a way to have Firefox respects the audio output device by default when it has been modified while Firefox is open?

  I've been a Firefox user for many years and I still use it as my main browser. A problem that has bothered me for years lies in the fact that when Firefox is open and I change my audio output device by default, Firefox does not respect this change and continues to play audio through the device that was used to originally. Even if you stop the audio and keep playing, does not change the output device.

  Is there a way that this can be configured in Firefox? Now, if I listen to music online (e.g. Soundcloud) I always use Chrome because it is respect changing the default audio output even in the middle of audio playback device.

  Reproduce:

  1. start audio playback (for example a YouTube video; HTML5 and Flash are affected)
  2. change your audio output device by default
  3. audio will continue to play the original output device

  Thank you!

  Hello there is a bug open for that you can vote for: https://bugzilla.mozilla.org/show_bug.cgi?id=698079

• How can I recover my software of audio output?

  I uninstalled my software of audio output by accident because a message came saying that a certain type of file couldn t run because of it so I uninstalled but I didn t know what it is that I uninstall and I put t know how to get back it or down load a new! Can anyone help?

  I have an Equium L300.

  It is normally a driver problem, in order to install the correct driver should do the trick. Please install audio driver for your laptop model. You can find it on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  By the way: do you have some unknown devices listed in Device Manager?

• HP Envy 17-N065na: How to improve the audio output.

  How can I configure the bang & Olufsen speakers for the best possible sound please?
  How to use the equalizer to get the best
  Audio output.
  Your response is much appreciated.