BPEL - lack of response business

Similar Questions

• Lack of response to the request of Adobe® Reader® and the Distribution of Runtime software.

  Lack of response to the request of Adobe® Reader® and the Distribution of Runtime software.

  I submitted the application form and confirmed the email address on February 6.

  The answer says "you will receive an email under little (but not more than three working days in the case on a standard application) informing you of our decision." 10 days and nothing so far.

  New application submitted.

  I'm trying to comply with your policies, but you're not making it easy. Can anyone things progress Adobe?

  Never mind. The second request came up to the back.

• 1297cb HP P7: lack of response from the hard drive or windows 7 to my monitor help

  Greetings.  I have a HP P7 1297cb, all original material except the memory and hard drive.

  Original OS at home, is now Pro.
  I thought that my hard drive has expired and bought a new WD 2 TB black.
  And I don't have the other HDD cause I already threw out.
  
  So, here I am.   I installed the WD Black again and nothing.  Monitor powers and that's it.
  I get a hard drive light to everything first, about 5 to 10 seconds and off.  Touch HD and feels light low race.
  All fans and fees lights.  Power light on.
  
  No NumLock or number lock lights.  Œuvres and key/monitor / mouse, as I am with them now.
  
  Shot four sticks of 2 GB memory and get the beep.  One at a time plugged in no beeps and back in.
  You use a Windows 7 Pro disk rebuild for installation.  When the computer starts, I tried F10, F12 and nothing.
  I even pulled the mobo battery for a few seconds.
  I disconnected the power supply cord (pc) and held in the power button for about 30 seconds.
  I even turned on with the installation disc in and waited (until at least 20 minutes) to see if the screen would change nothing.
  I am willing to check the cpu, which remains the only thing to check, I'm guessing that about it.
  I get no beep or beeps when the pc starts.
  
  So, I guess also, that my problem was not the hard drive in the first place. ???
  Thanks in advance for any help.

  gwolfman

  Hello;
  
  Let me welcome you on the HP forums!
  
  I don't know what a "Windows 7 Pro Rebuild disk'- so I don't know if it's any bootable media.

  Unless you changed the default device sequence in the start section of the configuration of the BIOS, it will look at the HDD FIRST and since it is empty, the PC will simply sit there - nothing to do.

  So, you must get to a boot device selection screen to boot from the DVD of Win7.

  The typical ways of doing are to press F9 or F12 - one of them will be implemented a unique boot device selection menu.  Then, you select the DVD drive and the PC should then restart.

  It can display a line of text at the top of the screen, something like «press any key to boot from...» "If Yes, press the space bar.

  If the DVD is good, the PC will then start on the initial screen for the installation of Windows.

  Good luck

• The faulty Synaptics Touchpad on x 2 13-m121sa Split driver causing frost and lack of response from the mouse

  Edit: I found a solution, scroll down.

  I had problems with my new Split x 2 similar to those already explained in the forums by other users. The symptoms are:
  
  1. unusual hanging or freezing of the mouse pointer on the screen and the use of gestures temperament (two fingers to scroll, zoom, etc.).
  
  2. slowdown in the computer in general; acting lethargic and freezing during light use or after closing the display.
  
  The symptoms seem to change according to the duration of the computer was operated and are affected by the screen from the dock of disconnection/reconnection.
  
  Being very good with these things, I decided to investigate and discovered the following:
  
  The root cause of both problems is the driver for the Synaptics Touchpad. While the latest version available on the HP website (17.0.10.9) seems to solve all unusual freezing of the pointer it has a large memory leak. In other words, when you move it on the touchpad pointer uses the memory of the computer. This is normal, but the problem is that the driver for the touchpad does not return memory; It cannot be reassigned. In other words, after a few hours of computer use (or to have the display closed) memory reached saturation point and the version of the computer to a halt.

  If you encounter the same problem take a look for yourself: open the Task Manager and look at the performance tab. Under the brief entitled you will find a value for "Non paged pool. With the computer idle, this number will not rise, but move the mouse and you will see it go gradually upwards without return. I have confirmed this to be the Synaptics driver using the Windows tool poolmon.exe - the culprits are the Irp and SynT.

  About the solutions, I tried a lot - but there is no absolute solution.
  
  You can uninstall the Synaptics Touchpad driver and the problem will disappear - the memory usage is no longer freezing or high. But unless the driver that the computer is to use the standard Windows driver - there is therefore no multitouch gestures like scroll or zoom in.
  
  I tried to install the generic Synaptics driver available on their site, and the computer will not allow him. Regardless of this, I forced the installation of the driver, but the generic driver does not work with this Touchpad anyway (error code 10). I tried the latest version (17.0.19) and a former one (16.2.21) without success. Even earlier (e.g. 15.x.x) refused to run on the grounds of incompatibility.

  HP support suggested a "Refresh" of system setting to factory, but put aside from the huge inconvenience of time and losing files - I know that this does not work either. Apparently a clean install worked for a single user - but for this you need an installation of Windows or USB disc that I did not - and I am skeptical that it would work anyway.
  
  So now I use the touchpad driver Windows standard without being able to scroll, zoom or use them slide-in gestures of Windows 8.1.
  
  If a representative from HP is reading this, I strongly suggest that this issue be escalated. A simple update to Synaptics could solve this problem which is causing the computers people freeze and lose your support staff time.
  
  TL; DR: Driver HP Touchpad is defective and causes a memory leak. Synaptics has generic drivers do not work. And the standard Windows drivers are not satisfactory.

  SOLVED!
  
  Through my own research I found a solution. While the most recent driver listed under this model is 17.0.10.9 it is actually a newer version which doesn't have this problem: version 17.0.10.16!
  
  I am always disappointed that HP has not suggest this solution themselves, given this driver was published in November 2013! HP if you're reading this: Please allow this driver for this model in your support pages.

  In any case, the solution is:
  
  1. open Device Manager (Control Panel-> hardware and sound-> Device Manager)

  2 in the 'mice and other pointing devices' open «HID Synaptics TouchPad»

  3. in the "Driver" tab, click "Uninstall".

  4. the pointer will disappear - restart the computer

  5. download the new driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk & lc = on & softwareitem = ob-127354-1

  (if that link fails try to search online for 'synaptics driver 17.0.10.16')

  6. open and install the driver

  I hope this helps. HP, please send my consulting fees through PayPal (!)

• Inspiron 620 MT switch drives me crazy (hitting and lack of response)

  My desktop computer Inspiron 620 is a few weeks... From the moment where I started using it I noticed the button walk / stop reacted very badly... After playing with him (pushing several times), it should feed into the system... so, I informed the Dell... they sent their technician with a new front end and a switch... After mounting the new components... same thing... It would be only power system after a few thrusts communication... He was perplexed and went far to say that he would inform Dell. So I'm stuck with the problem... Funny, is that the problem is worse when I try feeding the system first thing in the morning or after a long period of time... once I managed to power the system, the rest of the day I do not seem to have the same problem... I wonder... If the problem has nothing to do with the Power button but another component... Am I the only person experiancing this issue? Any ideas what I send the pc to Dell?

  Hi guys,.

  I have the solution!

  I extended my warranty for two years at a price of £70.00

  I went to Dell Support cat.

  Following the advice of the technician, I updated the driver from the system board and then updated the system Bios.

  Restarted the PC and everything is now PERFECT.

  Launches its first press of the power button EVERY TIME.

  You might be able to do it without the help of a technician of Dell.

  Good luck

  Hope you all get this fix.

  Kind regards

  Paul

• The addition of Vista Business downgrade

  My office (more than 25 computers) has a computer with Windows Vista Business edition and it's completely screwing of the network (all other computers use XP Pro).  I found this site: http://www.computerworld.com/s/article/9040318/FAQ_Giving_up_on_Vista_Here_s_how_to_downgrade_to_XP , explaining if you own Windows Vista professional edition you can downgrade to Windows XP Professional for free.  My company wants to do that.

  This pdf file: http://download.microsoft.com/download/5/f/4/5f4c83d3-833e-4f11-8cbd-699b0c164182/royaltyoemreferencesheet.pdf more supported article and informed me that we have the right to downgrade.  I remembered to Microsoft technical support and was directed to the Department of licensing and they put me on hold for more than an hour to inform me that I have to pay $ 60 to get the support to do what my company has the RIGHT to do it for free.

  I do not understand why microsoft has a PDF (on their website) explaining the cost free downgrade rights, but once I try to follow upwards, they try to charge me for the downgrade.  It was a huge mistake to trust Vista as being an operating system viable decent in the first place.  Even Microsoft themselves intrinsically admits Vista how shit is through their windows 7 ads.  Not only there all non-intuitive user problems, but it destroyed our database software and network when attempting to use it.

  My boss has suggested that we should upgrade to windows 7 on the network, but after the troubles I had with Vista and the lack of responsibility that Microsoft took to my companies case, I have no other choice to the strongly advise against it.

  I just tell my story in hopes that it might be a better way to solve the problem than to talk with someone on the phone that I understand not (for lack of comprehensible English).  Although I did not understand "pay 60 dollars and we will help you" he also at support.Microsoft.com for assistance.

  Thank you for your time in reading this and your understanding of my frustration.  I appreciate what you can do for me.

  Why I said to contact Dell, HP, it is because they are called OEM:

  An original OEMor OEM, manufactures products or components that are purchased by a company and sold under the brandof purchase of the company. OEM refers to the company that has manufactured the origin of the product.

  Here is the 'book' you are looking for:

  Can I downgrade my OEM version of Windows Vista business to Windows XP Professional?

  Yes. Right of demotion OEM desktop operating systems PC apply to Windows Vista business and Windows Vista Edition full, as stated in the terms of the license. Please note, downgrade versions OEM Windows Vista business and Windows Vista Ultimate are limited to Windows XP Professional (including Windows XP Edition Tablet PC and Windows XP x 64 edition). End users can use the following media for their downgrade: Volume Licensing media (provided that the end-user has a Volume License Agreement), trade retail (FPP) or System Builder hologram CD (provided that the software is acquired in accordance with the Microsoft OEM System Builder License). Use of degraded operating system is governed by the Windows Vista Business license terms, and the end user cannot use the downgrade and professional Windows Vista operating system. There is no right to downgrade to Windows Vista Home Basic or Windows Vista Home Premium Mick Murphy - Microsoft Partner

• FF has been fast, responsive and reliable. is not so much now

  I used once FF exclusively, it was great! I recommend it to everyone and even install it to people so that they can enjoy it also.
  Then for some reason any (over several years), it has become slower, inflated and would break more frequently, so I changed to a different browser.
  Given that I liked FF, I thought I would give it another go, but instead of an improvement, I think it is seriously degraded, crashing in the first run after installation.
  I'm really sorry for Mozilla, that's a shame.
  You guys have had a hand Director on what the internet should be since the early days, and I'd be happy to support you with your products and recommend once more; But if I can't run it myself immediately after installation, it is almost impossible.
  In this situation I saw simply google.com.au, adobe.com , and learningspot.com.au indicate that the browser completely locked up after loggin, with no indication that he had crushed other than a total lack of response.
  I will say that when I clicked on the X to close FF, it worked, but I see no dump on incident or any other information that might help solve this problem.
  Please understand during my presentation can its negative, it is constructive criticism, and if I had the crash dump, fortunately, I'd send it your way.
  I am pleased to send you the MS System Info dump if it would help at all (57 KB in 7z format).

  Moderator published offensive comments in the title of this thread - see the rules and lines guidelines .

  To see if Firefox saves data from accident and if she did, to share a link here, see the last section of this article: Firefox plant - troubleshoot and prevent assistance fixing crashes.

• Lack driver download web page

  Hi, I had to post a new question due to the lack of response on a previous post.

  Just a quick and simple question:

  Where the driver download page went to the HP Envy 15 laptop computer 151sa j?

  I was more on the page only 2 weeks ago, and it isn't here. I selected the appropriate and even country entered the serial number, but still nothing!

  Please help I need to check the driver updates as soon as possible

  My laptop:

  HP Envy 15 j 151

  8.1 Windows 64-bit

  Bought in Ireland

  Hello

  You can find it on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=7255484

  Kind regards

  DP - K

• Pavilion 17-F001dx: 'Windows 8 using 100% of the HARD drives with high average response time and low write speed '.

  

  It turns out that it is a pretty known issue windows 8.1 users infestation since at least 2013 and there is not a simple fix, then it cannot be * completely * lack of hp. but I've had two of these laptops, both the same model, one needing to be returned and exchanged for a problem absolutely no report with (hardware failure: ethernet port does not work with lights taped). Both are renovated. Both have been extreemly slow and unresponsive even compared to the lower Brazos powered by the laptop that I had before, but I recently decided to investigate why.

  So if there is something specific HP going on here, I hope that there is a simple fix. My average response time went upward as well more than a minute (> 60, 000ms), so that I'm an aberrant case here against this problem of reactivity/band bandwidth hardrive typical windows 8.1.

  Edit: there is a case with another HP pavilion laptop (intel powered, so there may be a problem of storage driver intel described in the first link) being much worse.

  Did not want to resort to that, but,.
  Going to a new facility to clean up an image of Windows Pro 8.1 from DreamSpark for my school.

  Disappointed by the lack of response. Given the odd subdomain name (h30434), I'm wondering if this forum has been abandoned.

• InDesign 5.5 side panels lack of content

  After force quitting my program several times due to lack of response, he seems to have lost all my preferences as well as the content of the side panel. I can open the side panels, but almost all of them are white. I can see my layers, links and pages but I do not see any colors, color chart, covering text or alignment.

  I played with a number of things to try to get this back to how I like it but no result.

  Is this one of these super easy of bugs that I forget totally?

  Help please! I work in this program on a daily basis and have gigantic projects that are time sensitive and must be filled.

  See replace your preferences

• How to change the values of business rule at run time?

  Hello
  
  I'm using Oracle 11g SOA. I did a BPEL process that uses Business Rule. Now the BPEL process is deployed with business rules so how to change the value of the business @runtime rule. I don't want to change the value @design time and deploy the code again.
  
  Is there a console or the portal? as Oracle BAM has own url? What is the url of Business Rule Manager?
  
  
  Thank you

  Can you check is the deployment of "composer" is in Active state.

  In the weblogic administration console, navigate to Environment--> Servers--> SOA_SERVER1--> Deployments (tab) on the left side of the menu.

  Thank you
  Vijay

• CDATA section adding in my reply - Oracle SOA - BPEL 11g (11.1.1.2.0) how?

  Dear all,
  
  Can someone guide me how to add the CDATA tag to my response of exisitng message?
  
  How the toCDATA() function can be used for this?
  
  Now that I was able to generate without CDATA tag, but I need some help on this CDATA tag, including the element < OS >.
  
  My requirement.
  
  I need to generate below of output XML in the context of the BPEL process the response.
  
  especially the "<! "[CDATA [9000908340DFG90823A]] >" under < OS > element.
  
  =================================================
  < XDFTransaction >
  < XDFTrnHdr >
  < XDFTrnDate > 2010 - 10 - 10 < / XDFTrnDate >
  < XDFTrnDate > 2010 - 10 - 10 < / XDFTrnDate >
  < XDFTrnDate > 2010 - 10 - 10 < / XDFTrnDate >
  < XDFTrnDate > 2010 - 10 - 10 < / XDFTrnDate >
  < / XDFTrnHdr >
  < XDFTrnEOL >
  MOM283982983 < AÉO > < / OAS >
  < / XDFTrnEOL >
  < XDFTxnCache >
  < AM >
  < TXN >
  < OS >
  <! [CDATA [9000908340DFG90823A]] >
  < OBJDTL >
  < OBJNO > 10001 < / OBJNO >
  < OBJDATE > 2010 - 01 - 01 < / OBJDATE >
  < / OBJDTL >
  < /EO >
  < OS >
  <! [CDATA [9000908340DFG90823B]] >
  < OBJDTL >
  < OBJNO > 10002 < / OBJNO >
  < OBJDATE > 2010 - 01 - 02 < / OBJDATE >
  < / OBJDTL >
  < /EO >
  < OS >
  <! [CDATA [9000908340DFG90823C]] >
  < OBJDTL >
  < OBJNO > 10003 < / OBJNO >
  < OBJDATE > 2010 - 01 - 03 < / OBJDATE >
  < / OBJDTL >
  < /EO >
  < / TXN >
  < /AM >
  < / XDFTxnCache >
  < / XDFTransaction >
  =================================================
  
  Now that I was able to generate without CDATA tag, but I need some help on this CDATA tag, including the element < OS >.
  
  Thanks and greetings
  Arunachalam.Chidambaram.
  Dubai
  
  Published by: arungoin on July 22, 2010 14:46

  Hello

  Design mode will not always work worry abt this... also to fill EO value dynamically try like this.

  
  
  
  
  & lt;![CDATA[$EOvalue]]& gt; 
  

  Kind regards

• Why the OSB is called stateless?

  Hi team,

  I often hear this "OSB is stateless and BPEL is dynamic," but never had an explanation for the same support. I went by this blog once again the same are mentioned here, but any theory about it Can I get some information as possible to this?

  Thanks in advance,

  Malcolm.

  Hi seb,

  I'll try to give you my explanation in this regard.

  The main difference between the two components of Oracle SOA Suite (OSB and SOA Infrastructure service engines) is that SOA Infrastructure, i.e. the BPEL service engine, mediator, business, Human Workflow rules widely uses the underlying database called Infrastructure SOA metadata store. For instance when you call a synchronous service developed in BPEL service engine BPEL and SOA infrastructure c a number of inserts in the base of SOA INFRASTRUCTURE. This process is also known as dehydration. Things get more complicated when we have an asynchronous service - then we have the two dehydration - storing the State of an application in the dehydration store (the store Infrastructure SOA metadata) and restore it later (rehydration) on the back of the State in the memory of the server for execution.

  However, the OSB does not such store of dehydration, i.e. OSB acts as a proxy that passes through (with some intermediate processing) to the demands of consumers of services to service producers.

  That is why the OSB is stateless (it does not store the intermediate state of executions application OSB) as opposed to SOA that stores the application States in the store of dehydration.

  There are some cases where a composite SOA application can be configured as stateless, which will prevent the SOA to store its State in the store of dehydration.

  Hope you find my useful and reasonable response!

  Kind regards

  A.

• Help recovering files flat.vmdk supplied thickness necessary!

  Hi all

  First of all, some background on my current configuration (and I'll try to keep it short and sweet)...

  I have 3 1 than to hard disks in a 5.x ESXi host I use in a RAID5 array.  The RAID is actually implemented and managed by a guest Windows Server 2008R2 VM on the host.  When I created data warehouses to build the table, I've formatted each of hard drives and added inside the vSphere Client as VMFS data stores.  When I added the readers to the configuration of the VM of comments, I put them to be supplied thick lazy-reset and all 3 have the same size (930.2899996 GB).  Each disc has an and a single VMDK and this VMDK takes up most of the usable usable VMFS partition sectors.  Inside of the guest, the virtual disks were formatted using Windows Disk Manager like dynamic GPT disks without starting and then adjust upward in a RAID5 array.

  What has happened...

  A week or if there is during a backup/cleaning of the virtual machine, I accidentally deleted a 2nd guest VM which has also consulted with data warehouses (I was testing Windows Server 2012R2, impressed) without separate configuration of the 2nd VM first, data warehouses and eventually remove the VMDK files from the disk.  I am recovering files flat.vmdk at least 2 of these discs.  As this happened, I spent many hours of research online about VMDK recovery and disk running scans trying to find the missing VMDK (again unsuccessfully). Nothing has been written to one of these discs, and the VMFS partition is still in-tact.

  I know...

  Geometry of the disk, the file names, logical sector size and number of sectors files missing VMDK (recovered in the log file of the last successful start-up of the VM)

  Using the above information, I have a model created for a descriptor ready replacement VMDK file as soon as I can retrieve images flat.vmdk

  What I've tried so far...

  ESXi Shell & vmfs-fuse-> Navigation data storages show volumes are empty.  VMFS-fuse mounts the volume, but no VMDK file cannot be found.

  UFS Explorer-> same basic idea.  VMFS partitions are found easily and show good healthcare, but I can't find the files there, either.

  Hexagonal view using of UFS Explorer, I autorévisés several areas that I know are within the area of data and verified the parity RAID5 withdraws (to be confirmed), it seems that the data is always there and in-tact.

  DiskInternals VMFS Recovery-> attempt to analyze the disk, after 36 hours of scanning on a single disc had not yet reached 10%.

  What I would like to...

  Find the starting location for the file flat.vmdk for each disc and do an image binary dump of this position to the end of the VMDK file (sector of end computed by the starting location + number of sectors for the VMDK's newspaper).  Since all 3 discs are identical in the sense of VMWare, this place of departure should be the same for all 3 disks.  I have an external HD to 3 TB in waiting for the dump once I know not where to start.

  Worth I feel is actually locate the start position in hexadecimal view (I do not know what hexadecimal values, I need to look for).  Sanbarrow (continuum) of the site (VMDK-basics), he said he's looking for the mbr as header of the file, but I've not found in my records.

  Last note 1: this isn't a company or business system.  This is my personal home server and I have legitimate licenses for all the OS running on the host computer.

  Grade 2: Yes, I * have a backup, but it is around the age of 2 months and lack about 300 GB of files that have been added since the last backup.  Can I recover a good part of the missing data (about 60 GB) back to the source and copying/download files, but there are still about 240 GB that I can't copy (source no longer exists).  My fault for not having more recent backups, but worse is still not a TOTAL loss (about 85 percent recovered from backup & original sources).  All disks in the guest system VMDK is stored on a separate DSS and have experienced good backups of the primary system on a separate disk drives).

  Any assistance with this would be much appreciated!

  Thank you

  Brian

  Ok...

  So, after several weeks and countless hours my best, I finally decided to give up and call it closes unexpectedly.  Finally, I reformatted the hard drive and rebuilt the RAID from scratch - it is just the initial synchronization now and I will fully bring my last backup to the table at this stage ends.  The most important things I have known and confirmed backups of already, but I'll never recover the archival footage that I had done previous laptops, but at least it's not a TOTAL loss.  I've not spent by them in a long time, so I doubt that something very important, but there are still some bugs the stew out of me.

  What bothers me more, however, is the lack of response at all here.  I read on previous posts on the subject, describes the situation in detail as well as what I need help with, and after 3 weeks and 60 views... nothing.  I thought that VMware would have an active, reactive and useful community much more than that and I must say that I am very disappointed.  I hope that all those who might find themselves in this situation is able to get the help they need.

  I hope everyone has a great 2014!

• Firefox and the iPhone 5 template error

  Hi, I'm about to finish my site using this template: it pulls shootit | Photography business Adobe Muse model | museGrid.com

  This is my site: clorofila.photo

  I get 2 errors on Firefox and the iPhone 5:

  1 FIREFOX: Some files on the server may be missing or incorrect. Clear the browser cache and try again...

  -This happens from time to time, I hit refresh and then begin to work properly and after a few minutes has not yet

  -J' I empty the cache several times as good cookies, etc.

  -J' have delete the entire site on the server and re upload again twice

  -Chrome, Safari seems to work very well

  2 IPHONE 5 more Wi - Fi: Template error: therefore the model file (or the model could not be opened)

  Any help will be appreciated.

  Firefox 35.0.1

  Muse 2014 2.1.10

  Win7 64

  It is a forum hosted by Adobe. Technical support team and the product team that the two are attending the forum, as do many users knowledgeable of Muse, but the shortest path to individual support is chat or by phone. Support phone and Chat live are available by going to http://helpx.adobe.com/contact.html?step=MUSE_how-tos-troubleshooting_how-tos_stillNeedHel p.

  The most common reasons for a lack of response on the forum are that no one else has encountered the same problem or not enough information is provided. In your case, I believe that it is especially the first.

  This document "some files on the server may be missing or incorrect" Warning Message described the potential causes of this warning appearing. Usually see this message intermittently when no changes have been made to the files on the server hosting implies hosting service itself is not reliable serving files. Only under these conditions would be consistent with the message of warning, so that with the model (which in this case is referring to a downloaded file and not to the .muse model was purchased) are not served or reliable served by the hosting server. It might be the file has not been downloaded or it could be that accommodation does not systematically purge the file.