BPEL Tower function accurately for a decimal value?

Similar Questions

• mask for the decimal value

  people

  I have the following in the table problem, I have this 00123456,12 value

  sending a file.txt need the following value:

  001234561200

  some mascara?

  LTC

  In the table, is stored as a character or a numeric value?

  My databases are set to use a period rather than a comma as the decimal separator, so substitute accordingly. Also I'm questioning the value of double rather than a table, but this seems to be what you want?

  Select Replace (to_char (00123456.12, 'FM00999999.9900'),'.) ') twice;

  REPLACE (TO_CHAR (123456.12, 'FM00999999.9900'),'. ')

  --------------------------------------------------------------------------------

  001234561200

• Used in forms for rule of rounding decimal values

  I am trying to determine what district to separate the rule using forms of round numbers decimal, extracted from the database to display in a shorter length field. Specifically, when a number is equidistant from its neighbours (e.g. 0.5 is equidistant between 0 and 1), which rule is used to determine if she is rounded upwards or downwards (see this for a reference of the standard rounding rules)? The online help documentation addresses rounded, but does not specify what rounding rule is used (for example half away from zero, even half or 'Banker of the borough', etc.).

  I tried to figure this out by trial and error, but make me inconsistent results. Here's my test case...

  In the two test cases:

  Database field is NUMBER (20.4)

  Form field is numeric, length 30

  Form field format mask, programmatically, set is FM999G999G999G999G999G999G999G999G999G999G999G990D90PR (i.e., round to 2 decimal places)

  The form field displays the value of the field database directly

  Test 1:

  Database field value is 1.4445

  Result: The screen displays the value as 1.44

  Test 2:

  Database field value is 1,445

  Result: The field of the screen shows the value of 1.45

  It's completely inconsistent. If 'half away from zero' or 'half of the odd' district were used, then the value 1 of the trial must be displayed as 1.45 (because the last 5 will round the previous 4 to 5 and repeat). On the other hand, if 'half zero' or 'half similarly' district were used, the value of Test 2 should be displayed as 1.44.

  I understand that the values stored in the form are not rounded, and that this will not necessarily errors of calculation. However, it is necessary for purposes of documentation that I determine what the current rule used to display rounded values.

  I use forms GR 11, 2.

  I thought about it (by another user). My hypothesis rounded is not accurate: 1.4445 would like to round up to 1.44 mathematically, not 1.45 because 1.0045 is closer to 1 than 2. Therefore, Forms uses the standard rounded technology Oracle, which is:

  1. If n is 0, then ROUND returns always 0 regardless of the integer .
  2. If n is negative, then ROUND (n, all) returns - ROUND (-n, whole).
  3. If n is positive, then ROUND (n, integer) = FLOOR (n * POWER(10, integer) + 0.5) * POWER (10, - all over)

  Source: incompatible tie rounding rule used in Oracle Forms to the decimal values - Stack Overflow

• function to set a default value for a column that is defined by the user

  Hi all
  
  Can use us the user-defined function to set a default value for a column?
  
  for example:
  

  create or replace  function test1  return number is
  begin 
  return 10;
  end;
  
  
  create table testt
   (id  as test1,
    name varchar2(20));
  
  error:
  ORA-02000: missing ( keyword

  Thank you
  Ashwani

  Ashwani says:

  Can use us the user-defined function to set a default value for a column?

  N °

  A trigger (this function call) can be used to implement such a feature.

• Enter the decimal values for the quantities of products

  What field Type can be a decimal value. My requirements are to enter a decimal value in comprehensive income (we often forecast and sell.5 quantities.)

  You can use the quantity field, it allows you to decimal values. I tried his works well in my case.

  See you soon
  Olivier

• return only the decimal value

  What function can I use to return only the decimal value of a formula

  (97 * 2.2) / 14 value returns 15.24

  I only want to use le.24

  Salvation is

  Use the formula - INT (formula)

  In the special case above:

  =(97*2.2)/14 - INT ((97*2.2)/14)

  You see two places to the right of the decimal separator in reason to be rounded off to the value real, in the shape of the cell to only show as two decimal places, either by setting the width of the cell close enough to force the rounding of the displayed value.

  Note that if the result is rounded (using the ROUND function) the actual value of the cell will be the rounded value. For the other two cases, the value displayed indicates only two decimal places, but the real value in the cell (and the additional calculations used by referring to this cell) is 0.242857142857144, which could lead to surprises in the results of the calculations downstream.

  Kind regards

  Barry

• Search for the nearest value table

  IM wondering if its possible to find a 1 d table worth, if it is not found, then find the nearest match. IM using the 'double' data type and I need at least an accuracy of 4 decimal point in the research.

  For now, im rounding decimal values to the nearest integers from you, but it is not effective at all. Im getting a lot of unwanted split in the plot. I need to be able to search for the decimal points. I found this function "About Equals.VI" starting from a previous thread. Even that uses the concept of the rounding.

  I enclose 3 screws "0.8 & 0.4.VI" are that I created, rounding decimals nearest digit.

  The "approximately equal" is the one I found online.

  The 3rd is I try to mess with what I can find as close a match.

  Y at - it a trick to work around this problem?

  Thank you

  Eureka

  This VI uses the first type of step 3 in your data.  Since you said that you can get the data, you can drop the in VI.

  At the end where I calculate the slope, you can use a linear adjustment if you have full or professional LabVIEW.

  

  

• Weird acting decimal values increment

  I was wondering if anyone has come across this problem and what you did to fix:

  When I try to increment or decrement a variable para.1, she retourne.1,.200,.300, etc.. After the first inc/decrement the third decimal point extend to however long (in pixels), I have my variable text that displays the value. So, if I start with a var that on the screen looks like: $$PrimaryRate$ $ and expand the area of text out beyond the length of the text string, then set it to 1 and then use a button to increment 1 para.1 consecutively, it produces something like the following: 1.1, 1.20000000000, 1.30000000000, etc. I tried just to shorten the text box to hide the additional decimals, but who does that until you hit the 10 s. Then, you lose the decimal point because of it being covered by the short text box. It's even worse that you go up more of places.

  I think that what is needed is the ability to specify decimals allowed for a variable (value of 1, 2 or 3 places usually), similar to the PDF form field values, but I don't see anywhere this setting in CP8 (my current version). I'm just missing?

  Also disappointed about not displaying variables is not my policy chosen, but that's another thread here somewhere...

  Thank you

  Alan

  You can put these 2 functions at the head of the html page. Call the incUp() or incDn() in the JavaScript window.

  function incUp()
  {
  var tempVal = Number (window.cpAPIInterface.getVariableValue ("myNumber"));
  += tempVal. 1;
  window.cpAPIInterface.setVariableValue ("myNumber", tempVal.toFixed (1));
  }

  function incDn()
  {
  var tempVal = Number (window.cpAPIInterface.getVariableValue ("myNumber"));
  tempVal =. 1;
  window.cpAPIInterface.setVariableValue ("myNumber", tempVal.toFixed (1));
  }

• How to write decimal values to hex bytearray?

  Hello

  To order liighting of flash, I need to send binary a usb dongle data. The pakkage the dongle to receive looks lik this:

  7th 06 02 01 FF 00 FF 00... E7

  the first value is the start bit

  shild and third some info length

  4th is the label

  then we can send 512 bits (channels) from 0 to 255 Dmx value

  at the end one stop bit.

  So what I want is to write the values of the different channels in the device. First of all, I have to go to decimal to hexadecimal values by using the following code.

  function decimalToHex($decimal:int,_$padding:int_=_2):String {}

  var hex: String = Number ($decimal) m:System.NET.SocketAddress.ToString (16);

  While (hex.length < $padding)

  {

  Hex = '0' + hex;

  }

  Return hex.toUpperCase ();

  }

  Decimal var: int = 163;

  trace ("decimal:" + comma);

  var hex: String = decimalToHex (decimal, 2);

  trace ("hex:" + hex);

  It gives me hexadecimal values as in the example package.

  Now, I want to write this in a bytearray. I found this:

  var len:uint = 512;

  var outputByteArr:ByteArray = new ByteArray();

  outputByteArr.length = len;

  for (var i: int = 0; i < len; i ++) {}

  outputByteArr.writeByte (hex);

  }

  trace (outputByteArr);

  But it gives an error indicating that the writing. Byte needs to a number, not a string.

  When I change to:

  outputByteArr.writeByte (0xff);

  for example, it does not.

  Does anyone know how to properly change the decimal values that I can put in the Bytearray?

  Thanks in advance!

  Greetings,

  Piet

  You can use the writeMultiByte() method to write a string.

• ascii conversion point floating decimal values

  Hello

  With the help of LV8.6, I'm working on a project in which I'm floating
  data point on port series as ASCII form and I need to convert it to sound
  appropriate decimal value.

  I tried the type cast to convert data and managed
  When the data were only a decimal value.

  But when these values are floating which is my
  data real i.e. 1.63, 3.41. I receive it as 1.11 (if it is 1.63), i.e.
  get only the first digit.

  But the data are received correctly on the screen of the chain and
  HyperTerminal, which means that communication is perfect, but the error is
  programming.

  kindly guide me what I have to do.

  Thank you

  It has simply changed format in the string conversion.

  Thanks for you advice

• Decimal value not displayed after the decimal point in my excerpt

  The decimal value is not get rounded to the nearest integer in my voltage pack display box not switched. I changed his property in decimal, the problem continues. When I put a probe between the separator and the display area, I have correct values. How to get the correct value in the display area.

  

  See the color (color if you are UK) wire where you hang a probe... his orange (representing a number to floating point)... but the color of the indicator (another name for no dial-up power pack rack) is blue (U32, means is the representation of unsigned 32-bit integer)...!

  If that is the question... then try something... right click on the indicator (another name for no dial-up power pack rack) and select "representation > DBL", as shown below..! ' "

  

  It should work...!

• How to get the decimal value of a string of international currency

  Hi all

  How to get the decimal values to a string of international currency.

  Finally, we get to the real problem.

  You can use location functions or write your own using string functions already mentioned...

  http://developer.BlackBerry.com/native/documentation/Cascades/device_platform/internationalization/

• OBIEE Gauge - how to limit the decimal values in the footer area?

  Hello

  Is anyone have an idea on limiting decimal values in the foot of the gauge? In fact, I want to display the value of line as well as the value of the measure in the foot. I tried round, truncate etc and none of them actually worked.

  Please suggest some ideas.

  OBIEE Version: 11.1.1.7.0

  

  

  Thank you and best regards,
  Clinton

  Hello

  try to use

  Substring (cast (10, 233' tank) OF 1 FOR cast (Locate (',', cast (10, 233' Char)) as int) + 1).

  Change '10 233' by your column formula

  Felipe Idalgo

• There is 'table' for the object_type values?

  I wonder if there is a system view, or a table for all the values that can appear in the all_objects.object_type column? Or maybe the only way to get this list of os values to query with the distinct keyword dba_objects.object_type?

  Thank you

  Look at the source of the view:

  Decode (o.type #, 0, 'NEXT ITEM', 1, 'INDEX', 2, 'TABLE', 3, 'CLUSTERS',)

  4, 'VIEW', 5, 'SYNONYM', 6, 'ORDER ',.

  7, 'PROCEDURE', 'FUNCTION', 8, 9, 'PACKAGE ',.

  11, 'PACKAGE BODY', 12, 'TRIGGER ',.

  13, 'TYPE', 14, 'TYPE BODY ':

  19, "PARTITION TABLE", 20, 'PARTITION OF THE INDEX', 21, 'CRAFT. "

  22, 'LIBRARY', 23, "DIRECTORY," 24, "QUEUE."

  28, 'JAVA SOURCE,' 29, 'JAVA CLASS', 30, 'JAVA RESOURCE. "

  32, "INDEXTYPE", 33, "OPERATOR",.

  34, 'TABLE SUBPARTITION', 35, "INDEX SUBPARTITION.

  40, 'LOB PARTITION', 41, "LOB SUBPARTITION.

  42, NVL ((SELECT "EQUIVALENCE OF REWRITING"

  AMOUNT $ s

  WHERE s.obj #= o.obj #.

  and bitand (s.xpflags, 8388608) = 8388608).

  "MATERIALIZED VIEW'),

  43, "DIMENSION."

  44, 'CONTEXT', 46, "SET OF RULES', 47, 'PLAN OF RESOURCES."

  48, GROUP "CONSUMER."

  55, "XML SCHEMA", 56, "JAVA DATA."

  57, 'EDITION', 59, "RULE."

  60, "CAPTURE," 61, "APPLICABLE."

  62, 'EVALUATION CONTEXT ',.

  66, 'JOB', 'PROGRAMME', 67, 68, "JOB CLASS", 69, 'WINDOW',

  72, GROUP 'PLANNER', 74, 'CALENDAR', 79 'CHAIN ',.

  81, 'GROUP OF FILES', 82 'MODEL OF EXPLORATION' 87, "ASSEMBLY,"

  90, 'IDENTIFICATION', ' 92, 'CUBE DIMENSION', 93, "CUBE."

  94, "MEASUREMENT RECORD", 95 "CUBE BUILD PROCESS,"

  100, "LINE WATCHER", 101, "DESTINATION."

  "UNDEFINED"),

• How to remove the decimal value (. 00) of the slider control

  Please ask me how to remove the decimal value (. 00) of the slider control and Add (if possible) % in after effects cs6.

  I guess you mean to animate text with a slider.

  Add a slider (options for expressions) to your text layer and then add this expression in your Source text:

  x = Math.Floor (effect ("Slider Control") ("Slider"));

  x+" %"

  That's all