Satellite A100 PSAA8E - sometimes screen does not show anything

Similar Questions

• Satellite A200 - 23Q - screen does not show anything

  I am user and owner of a Satellite A200 - 23Q. The last few days, my laptop appears a certain problem. Its kinda does not. When I press the power button / stop, screens appears nothing, not even loading BIOS or something, even if the hard drive and power satellite (bottom left) turns on. Well, someone could say it is a screen problem, but this thing does not happen always, sometimes its working normally.

  I'm waiting for a response as soon as possible. Thank you

  P.S. This is my 1st post, so please see the patience and apologize for my weak English level

  Hi fotakis,.

  Which is easy enough to say what, exactly, is the problem: just connect an external monitor. :)

  If you see a photo on this subject, it seems to be only a problem of internal monitor. Maybe the FL inverter needs to be replaced
  But I think that in both cases (also when the external monitor shows nothing) you need professional assistance from an authorized service provider.

  The ASP can solve this problem!

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Screen does not show anything about the accident, put it in my Pocket

  No device

  Hi all

  I have a Tungsten E2 and I put it in my pocket on the accident and now whenever I turn it on, it displays as a strange pattern and habit of show me the on-screen buttons to push to put my password so I can get. I think that my camera had the it.

  I shouldn't have to out of Holster.

  Good bye

  Brockisit

  It seems that if you broke the screen to look at it or relying on it somehow...

  Repairs/parts at usedpdaparts.com or directfix.com.

  WyreNut

• HP Probook 4520 s screen does not do anything...

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  Fassi wrote:

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  In a dark room, boot up your laptop and shine a flashlight on the LCD screen.

  If you see a very dark Windows desktop, then you have the chance.

  The backlight inverter has failed and must be replaced. If you are a kind of DIY user, then this is a repair at low cost. If this is not the case, have done so in a store could cost @ $75.00.

  If you still don't see anything then the LCD failed. It is a more expensive repair.

  If your laptop is still within its warranty period, it's time to Contact HP warranty repair service.

  Best regards
  ERICO

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• HP Envy 120: Touch screen does not show. Buttons on the front are unresponsive.

  The touch screen does not appear or appears with vertical bands of color. Power switch; WiFi; Open on the front buttons do not work. It will be printed from the computer and printed the test page. After it printed the test page, it stops and will not respond to the buttons on the front, but will always show from the computer. I unplugged and plugged back in after waiting for 30 seconds.

  If it is not under warranty take it. Buy something else.

• Satellite A100-192: screen does not show colors properly

  Hello!

  I just bought a new laptop Satellite A100-192, technology TruBrite screen, and I have a problem with the display of colors and sharpness of the image. For example, the letters that are gray look more or less grey gray and there is not an intense color. Is it because of the model of the laptop or is it possible to fix this? It's a bit disappointing when I try to watch a DVD or even when I read the Web pages... The colors are not consistent...

  THX!

  It is a known problem, your note is psaa9. Search this forum "dithering", I have already discuss this dependent problem.is bios.i really am very sorry for my English

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• Satellite A100 - 906 internal LCD does not work

  Hello, I have laptop Toshiba Satellite A100-906, and I struggle with internal LCD. Only three gray belts are displayed with horizontal lines or without. Backligt works. External monitor works.
  Initially, the screen freezes sometimes but after short time continue to work. But now is still dead.
  What is defekt? LCD or graphics card? It's the Geforce Go 7600 with 256 MB.

  Help, please.

  > External monitor works too.
  You said that external monitor is not affected. Right?

  Well, in this case I think that the graphics card is OK and the problem is related to the internal display.
  If the graphics chip would be affected, both screens would not work properly.

• Satellite R10-101: touch screen does not work in tablet mode

  Hello

  I just bought a Satellite R10-101 laptop / tablet.

  The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

  When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

  The touchscreen should be enabled or that I have to get a Toshiba stylus?

  The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

  Thank you for any help or advice.

  Joe

  Post edited by: Joe Blow

  Hello

  The display panel works as a touch sensitive digitizer screen.
  You need the stylus to use the touch screen in tablet mode.

  I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

• On the Satellite A100-784 Internet connection does not work

  I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.

  It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?

  Thank you all in advance and my apologies for the newbie question.

  Each router must be configured and the right data ISP (internet service provider) must be inserted.

  -Don't configure you the router?
  -How about the TCP/IP settings? All the settings are set to automatic?
  -How about firewalls? Have you used one or you turn it?
  -Have you tested different browsers?

  Please check the points above.

• Satellite U840W - Toshiba Split Screen does not work

  Hi all

  My laptop is a Toshiba Satellite U840w. I reinstalled a new version of windows 8 pro but I lost all the software by default.

  I decided to download Toshiba Split Screen to enjoy my 21:9 screen, but the problem is that it does not work!

  When I run it, I can open his window to turn it but it does not appear in the notification area, and nothing happens.

  I don't really know what to do, I hope someone has a solution. Thank you.

  Kind regards.

  Hello

  I guess you have not installed all necessary drivers, tools and utilities that are available on the page of the Toshiba UE driver.

  Make sure that you have installed the software suite next to the Split Toshiba screen utility
  -Driver Toshiba system
  -Toshiba system configuration utility
  -Toshiba utility function of key
  -Desktop Toshiba Assist

• Satellite A100: USB and Modem does not

  Hello!

  My name is Clarisse and I have a Satellite A100, which I use for school. I'm having a problem with its usb ports and modem.
  When I try to connect to the internet, he just say he of no tone and tells me to ensure that lines are connected, who they are and the phone line works certainly, as I checked with my PC and I also checked the phone if it was busy, it wasn't.

  I then try again and a window appears and says that there is something wrong with my modem, how can I fix?

  The other issue is my usb ports who refuse to work, they can't recognize anything I plug (for example, bluetooth adapter, flashdisk, ipod) even though they are installed!

  However, the strange thing is that when I plug in my printer it connects and does its job:(je suis tellement confus et scolaires est devrait commencer bientôt.)

  Can someone help me please?

  Thank you
  Clarisse

  Hello

  In my opinion the modem connection does not work due to the modem settings.
  Go to Device Manager and select the properties of the modem.
  Please select the Modem tab. You will find the option "wait tone before dialing." You must disable (uncheck) this option.

  I guess that the USB ports cannot recognize the external USB ports because of the power.
  The USB ports provide 500mA. It is a standard USB. If external devices use a power greater than 500 ma, so it is possible that the device may not be recognized.

  In such cases, the USB hub with an external power supply can solve these problems.