Enter the decimal values for the quantities of products

Similar Questions

• You need to enter the key of product again after you reset/refresh your pc?

  Hello, I was wondering if you have re - enter product key windows 8 after reset or update the operating system

  For both refresh and reset scenarios, If no information store state or activation activation is available, or if the activation store is unreadable, the activation status will not be preserved. The user must activate again once the operation is complete.

  So, I would say, it depends on how much Windows 8 has been corrupted that force you to use either refresh or reset to 1st place.

  If I have a chance I'll try to refresh and see what happens because I have an Image return and even if the discount asks me to activate I will just restore the image.

  J W Stuart: http://www.pagestart.com

• Problem activating CS4 Master collection upgrade edition when you enter the previous CS2 product key

  Hello Adobe,

  I'm trying to reinstall CS4 Master collection edition update that, as part of the installation process, asking you a CS2 product key, I have my Ye Olde CS2 software. However, when I try with the key of CS2 - who has worked in the past when activating - now is denied.

  Is this due to the deactivation of the activation servers CS2 a few years back?

  How can I reinstall my CS4 software without the key CS2 working please?

  Thank you

  Tim.

  Try to use the serial number CS2 without activation provided by Adobe at the download page.

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• Cut the decimal value in the input text

  Hi all

  JDeveloper version: iam using jdev version 11.1.1.6.2

  I need to cut the decimal when the user enters a decimal value.

  IAM a table with one column as editable.

  For example:-If the user enter 123,53 in the editable column, tab press ENTER key press or move to the next row, I want this value to be changed like 123.

  Guide me on how to do this. I tried with VO/OT Format, convert number, nothing helps me.

  Reg,

  Lakshmi.

  USE IT FOR YOUR NEED...

  that assumes that you have a table in which a column is ok SALARY, then add a ValueChangeListener on data from this column and AutoSubmit = true and also immediate = true and then write the code in valueChangeEvent as below...

  public void decimals (ValueChangeEvent valueChangeEvent)

  {

  RichInputText sal = (RichInputText) valueChangeEvent.getComponent ();

  s oracle.jbo.domain.Number = (oracle.jbo.domain.Number) valueChangeEvent.getNewValue (); for Type conversion

  int a = s.intValue ();

  sal.setValue (new oracle.jbo.domain.Number (his));

  RequestContext adfContext = RequestContext.getCurrentInstance ();

  adfContext.addPartialTarget (sal);

  }

  DO it this way, I hope that the problem will be solved.

• Change the user entered to calculate a decimal value before event?

  Hello

  Is it possible for a user to verify value entered a decimal field and change it before it is used to calculate events associated with other areas? Basically I want to trick reset and nulls at the source, change them to 1 and thus to avoid the mistakes of 'division by zero' that could be in the other fields in the form.

  Thank you

  Rod.

  Hi Rod,

  I think that I still have to be missing something.  I thought that all errors in the calculate event were removed.  I hope that the attached form helps to explain what I proposed.

  Bruce

• Directly enter values for the fade in/out time and linear value.

  Sometimes, I like to apply fades and dissolves by directly entering the duration - that is to say "60 frames" or "2.5 seconds."  I would like to be able to do in order to quickly make some bland identical to others or specifically to make much longer or shorter.  I see how to recover the box fade and drag it to change the duration and the linear value of fades, and I see that I can select a specific duration on the timeline and manually, drag the fade to match this term, but it would be much easier if I could just enter the numbers both the duration and the linear value.  Audition offers a way to do this?  Note that I want to do in the multitrack Editor so that it is non-destructive, so the "Envelope Fade" effect does not work for this.

  Thank you.

  lalittle wrote:

  Audition offers a way to do this?  Note that I want to do in the multitrack Editor so that it is non-destructive, so the "Envelope Fade" effect does not work for this.

  Thank you.

  Not that I know unfortunately.

• Enter the value for the data files:

  Hi all
  I use 10.2.0.1.0
  I have a tablespace "hg" with two data files.
  whenever I use after an order to drop this tablespace I hv asked values for data files
  Welcome is:
  
  SQL > drop tablespace hg, including content and data files;
  
  SQL > drop tablespace hg, including content and data files;
  
  I have two data files to the tablespace named as hg.dbf, hg1.dbf
  
  now what I hv value to enter? or how to calculate the value.
  
  
  Thank you

  Honey says:
  Yes I know its 'AND' but when I using the '&' then oracle asked me of ' enter the values of the data files: "k".
  Please try first, then the calculation of the value.
  It can be a variable binding value.
  If you find the answer please suggest steps

  Simple words, the "DROP TABLESPACE" command does not support '&' character. & is a substitution of placeholder for SQL variable * more.

  Even if you provide the value for the "data files" prompt, the command does not work as it would lead to "drop tablespace including contents tsname *"details of your file *.

• return only the decimal value

  What function can I use to return only the decimal value of a formula

  (97 * 2.2) / 14 value returns 15.24

  I only want to use le.24

  Salvation is

  Use the formula - INT (formula)

  In the special case above:

  =(97*2.2)/14 - INT ((97*2.2)/14)

  You see two places to the right of the decimal separator in reason to be rounded off to the value real, in the shape of the cell to only show as two decimal places, either by setting the width of the cell close enough to force the rounding of the displayed value.

  Note that if the result is rounded (using the ROUND function) the actual value of the cell will be the rounded value. For the other two cases, the value displayed indicates only two decimal places, but the real value in the cell (and the additional calculations used by referring to this cell) is 0.242857142857144, which could lead to surprises in the results of the calculations downstream.

  Kind regards

  Barry

• entering the bar address goes to the search engine for starburn software. I have never installed this program, and I can't remove it... What is Mozilla?

  I don't want the search to the right of the page bar, but the main address bar.
  If I type kas for example and press ENTER, the search of the starburn software page appears.
  I looked for traces of this ANYWHERE in my PC, but cannot find it.
  This who can I remove it? Or is it a legitimate program that came with firefox?
  Thank you

  Install this addon https://addons.mozilla.org/en-US/firefox/addon/searchreset/

  This module is very simple: when installing, it backs up then resets your search and preferences of the home page to their default values, and then to uninstall. This affects the search bar, search bar URL, and the home page.

• the initial value for CNC

  Hello LV users,.

  I have a VI that is used to initialize some experimental equiptment. She spends on a cluster of ten digital control whole DBL as parameters. Everytime I open the program the values are reset to zero and I have to enter the return values in. Is it possible to set default values for controls, so I don't have to change them every time I open the program.

  Thank you

  Enter the number that you like in the control. Then right-click on the control and choose 'Make default value '.

  Mathan

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• Decimal value not displayed after the decimal point in my excerpt

  The decimal value is not get rounded to the nearest integer in my voltage pack display box not switched. I changed his property in decimal, the problem continues. When I put a probe between the separator and the display area, I have correct values. How to get the correct value in the display area.

  

  See the color (color if you are UK) wire where you hang a probe... his orange (representing a number to floating point)... but the color of the indicator (another name for no dial-up power pack rack) is blue (U32, means is the representation of unsigned 32-bit integer)...!

  If that is the question... then try something... right click on the indicator (another name for no dial-up power pack rack) and select "representation > DBL", as shown below..! ' "

  

  It should work...!

• failed to create value for the message Analyzer "at line 54.

  I get the following error, can someone please?

  failed to create value for the message Analyzer "at line 54.

  Hi ejpeppjep,

  Check if this article helps you fix the problem: http://support.microsoft.com/kb/823768

  If the problem persists, we recommend that you try the following steps and check the result.
  Step 1: a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.
  c. once the analysis is complete, restart the computer and check if the problem persists.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Step 2: If the problem persists, restore the computer to an earlier time
  see How to restore Windows XP to a previous state .

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OBIEE Gauge - how to limit the decimal values in the footer area?

  Hello

  Is anyone have an idea on limiting decimal values in the foot of the gauge? In fact, I want to display the value of line as well as the value of the measure in the foot. I tried round, truncate etc and none of them actually worked.

  Please suggest some ideas.

  OBIEE Version: 11.1.1.7.0

  

  

  Thank you and best regards,
  Clinton

  Hello

  try to use

  Substring (cast (10, 233' tank) OF 1 FOR cast (Locate (',', cast (10, 233' Char)) as int) + 1).

  Change '10 233' by your column formula

  Felipe Idalgo

• How to provide values for the elements of type complex in XSD?

  Hello

  I use JDev 11.1.1.7.0 and Weblogic 10.3. I'm new on create XSD.

  How to provide the value to 'Enter' in the case below? It is a complex type element with an attribute. When I test this on EM, I'm not able to enter the value in this "entry". Only the attribute is available for entering values.

  

  I have a XSD which looks like:

  Design:

  

  Source:

  <?xml version="1.0" encoding="UTF-8" ?>
  <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
              xmlns="http://www.example.org"
              targetNamespace="http://www.example.org"
              elementFormDefault="qualified">
    <xsd:element name="FormInput">
      <xsd:annotation>
        <xsd:documentation>Attribute Example</xsd:documentation>
      </xsd:annotation>
      <xsd:complexType>
        <xsd:sequence>
          <xsd:element name="Input">
            <xsd:complexType>
              <xsd:simpleContent>
                <xsd:extension base="xsd:string">
                  <xsd:attribute name="InputAttribute" type="xsd:string"/>
                </xsd:extension>
              </xsd:simpleContent>
            </xsd:complexType>
          </xsd:element>
        </xsd:sequence>
      </xsd:complexType>
    </xsd:element>
    <xsd:element name="FormOutput">
      <xsd:complexType>
        <xsd:sequence>
          <xsd:element name="Output">
            <xsd:complexType>
              <xsd:simpleContent>
                <xsd:extension base="xsd:string">
                  <xsd:attribute name="OutputAttribute" type="xsd:string"/>
                </xsd:extension>
              </xsd:simpleContent>
            </xsd:complexType>
          </xsd:element>
        </xsd:sequence>
      </xsd:complexType>
    </xsd:element>
  </xsd:schema>
  

  Thank you very much.

  Hi Harsha,

  As you use the "tree" in the em console to test your service, it does not correctly recognize extensions/restrictions 'simpleContent '.

  I suggest that you use the 'XML' view, but if the attribute is missing then you must add it manually to the. ( Ex: ) .

  I suggest that allows you to test your service SOAP UI and it generates properly signed your application of xml syntax.