Brain dead on the addition of a simple text bearing...

Similar Questions

• Is it far from the addition of arrows and text to a photo?

  I am new to Lightroom and I am slowly learning its functions.  But is it possible to add the test one and symbols to the image during the editing process?

  No, not with Lightroom.

  You need an editor of pixels like Photoshop or Paint Shop Pro.

• Sequence step results in the report in Simple text format

  I use Teststand 2012 and that you have installed the plugin from model simple text report.

  My main test sequence called a number of subsequences that contain the test steps and contain also several subsequences. A number of the subsequences is only stocks. My test result file contains all the results of measures of test as expected, but it also contains a line of output for each call of sequences - makes it difficult to see the results that count. I would only record the test steps.

  Looking at the code SimpleTextReport.dll in CVI I see it is stepping into the results and updated list in the form of each line (I changed some of the formatting). Is this the right place to filter the levels of appeal of sequence or can I stop the call sequence steps to be added to the list of results?

  You can put it in the sequential model. Just use ProcessModelPostResultListEntry with the same code. If it's in the template, you won't need it in other files. In addition, he is probably already stuff in the model. You'll have to code around it. This is how they do it on the fly.

• configuration of the plugin simple text report

  I am updating a project of Teststand 4.2 for 2012. The original was a text via a report updated the sequential model and ICB code. I have trying to find current best practices to achieve a similar report.

  I installed the plugin to report simple text example but can find no documentation on how to configure it.

  The example works fine, but the columns have no limits or the measured value and have other items that I didn't need.

  Looking through the code I can see these are defined in the settings of the plugin, but I do not see where in my project to put.

  I'll also have to configure the report header and the name of the file.

  David

  What exactly do you mean by "key values"? Are you referring to the Key property in the NI_SimpleTextReport_CVI.seq?

  

  In order to get the type of comparison of a numerical limit test, for example, you can use an Expression like this post:

  Locals.ComparisonType = Step.Comp

  This would amount to "FROZEN".

  Regarding the addition of the results of the report, the key values are a string of research compared to a result object. In this case, you can add what you want to log on to the other results of this approach. Then, you can add a new column to the report in the NI_SimpleTextReport_CVI.seq file and the value of the key:

  AdditionalResults ["NameOfAdditonalResult"]

  

  

• Executable error Excel VI simple text

  I have just upgraded to Windows 7 today and that you have installed Labview 2009 on the machine. Some of the VI, I must support using the vi simple text Excel. When I go to test my changes, my VI States that the Excel sub vi simple text is not executable. I am at a loss. This who could I have missed in the installation?

  Hi BadAzzS10,

  The assumption that it had to do with Excell 2010 is correct. The 2009 edition of the report generation toolkit is only compatible with the versions of MS Office 2007.

  Here is an article in the knowledge base that passes on the compatibility of the reporting tool.

  Report Generation Toolkit compatibility with Microsoft Office and LabVIEW

  If you have two options.

  -You can upgrade to LabVIEW 2010 toolkit and reporting 2010 (gen 2010 report does not work with LabVIEW 2009)

  or

  -Install MS Office 2007 on your computer.

  It is possible to have two versions of MS Office on the same machine so that you won't lose MS 2010 by doing this, however the steps that Microsoft gives an overview on their website.

  How to run multiple versions of Office on one computer

• Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add it or drag it immediately comes crashing windows, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add any

  Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.

  I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?

  Fixed a problem when converting the mp3 file. WAV...

  some poor Adobe Premiere Elements if there is for example simple bug in the software.  Waste of money for this software.

• Where are the additional forms of 8 Captivate?

  This could be a very simple question and it might be somewhere obvious, but I'm just curious as to where all the additional forms might be. In Captivate 7, when you clicked on the forms, you have a variety of different forms, you could use. In Captivate 8, there are just a handful.

  Hello

  Try to insert a form, and then looking at the properties on the right panel.

  In particular, click on the area shown in the image below.

  

  See you soon... Rick

• Impact on performance at the addition of materialized view logs at the tables?

  I write a very complex query for a client of our database system transaction and this will require the creation of a materialized viewbecause, all attempts at development to make acceptable performance failed.
  
  I want to activate the fast refresh the MVIEW but I am confused about the consequences of the addition of the addition of materialized view logs to the base tables.
  
  Some tables are large and involved in a large number of transactions and I wonder if the INSERT/update performance will be seriously affected by the presence of a newspaper mview.
  
  Maybe it's a simple question, but I was unable to find an answer very clear in the literature.
  
  Thanks for all the answers!
  
  Chris Mills
  Biotechnology data management consultant

  There is an overload for the newspapers of the view materialized, a little less, but roughly on par with a trigger that writes to a table.

  If it is an OLTP system where you do a lot of low-value transactions, the general expenses percentage is probably not particularly great, something in the range of 5-10% maybe (although, of course, by running tests in the development environment would be desirable). If there are loads in bulk, the impact of the percentage could be higher.

  Justin

• Install the additional content does not

  Hello!

  Again and again, I tried to install the additional content in logic, but his does not work.

  I tried to install 2-3 in time, I tried to install everything at once.

  Nothing works.

  I restarted my computer, no difference.

  I looked up to find (for example) Mellotron in logic.
  Sound still not available.

  What I am doing wrong?

  

  When you press "Select the uninstalled all button" nothing will not be selected?

  

  You show that you have installed content.

  You can find it in the higher level of the library folder.

  See below - this which should solve it for you.

  

• MS 2100 "dead" after the restart - only 2 lights "

  I rebooted my Satellite Pro 2100 and waited for it to power upward again. But it does not. It is fairly new, 1 year old. I pressed the button, but the machine stays dead. The more good led-light will turn on for a second and then turns off again. No sound from HD, no fan noise, nothing.

  I read in the forums on usenet that there might be something to do with the battery charging too long. But if it's real: the laptop must be able to operate without a battery for a power adapter? Or am I wrong?

  Thanks in advance for your answer!

  Hello
  you absolute correct! The laptop should run just with adapter connected.

  You can just test one thing.

  Remove the main battery and the AC adapter.
  Wait a minute just reconnect the adapter to the laptop and try to turn on the machine.

  The problem persists?

  As you said the laptop is just over a year, and if the problem persists, try the best way for this problem is to give the laptop from Toshiba Service centre for a check.

  Good bye

• How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• Battery is dead and the Satellite C660-15r not turn on or charge

  I have a PC laptop toshiba Satellite C660-15r I've had for a year.
  For these last days, I had to move the charger a little when I insert it into the laptop so he could load.

  Now the battery is dead and the laptop will not turn on or charge.
  It's not happened before and there is no other problems with the laptop.

  Have you tried to contact the nearest Toshiba service provider and ask for help first?
  I mean the guarantee must be valid in order to see whether they can help somehow.

  Please clarify this and send feedback.

  BTW: workbook correctly on the current doesn't provide not only (removed battery)?

• Why the addition of a reference to the rescue mailbox is inactive?

  Why the addition of a reference to the rescue mailbox is inactive? How to add boxes to the letters of relief to reset your question secret?

  What do you mean by "add a reference to the rescue mailbox is inactive"?

  You should be able to add an alternate email address to your account by answering your security questions: on your Apple ID - Apple Support email addresses

  Who does not?

  If you mean that you forgot your answers to your questions and you need to reset the and do not already have a verified backup on your account e-mail address, then you will need to contact the Support of your country for the reset of questions: Contact Apple for assistance with the security of the Apple ID accounts

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then add an alternate e-mail address (and verify) for possible future use

  Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

• No problem with the addition of a Kingston SSDNow V300 240 GB SDD to a D7-1245dx?

  A knowledge of any problems with the addition of a Kingston SSDNow V300 240 GB SDD to a D7-1245dx? Its size is 7mm width 69,85 mm x depth 100mm height but not sure of the size of the computer laptop berries/caddy supports

  Decide whether to use the laptop for a little longer so to upgrade the system to a Kingston 240 GB SDD drive and move the current drive to the secondary location (already got 2nd coming of caddy). It lets me do a bit more space on the laptop in addition to increasing performance.  Figure between an SSD and get up to 8 GB ram it should last a little longer.

  You will have a shopping cart for the SSD, but it looks like you have an and get a second wagon. Dv7-1000 series does not use a cable or connector. the hard disk plug right into SATA ports on the motherboard. 7mm drive has the connectors SATA and the mounting holes exactly in the same place as a 9.5 mm drive. All is just shorter so the reader rides low in the caddy. As a swimming pool with 20% water let out. 7mm SSD works perfectly. Windows 7 or 8/8.1 are preferred; Vista is not configured to treat SSDS as well or easily.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The upgrade and the addition of material

  Hello

  This is my situation, I'm in music production, and I need to upgrade my PC to fit my needs. I'm looking to upgrade memory and RAM as well as the addition of firewire ports. The firewire port is very important because I need to connect an audio interface I. I know that I can get all these components, it is clear the fact that I don't know what is compatible and it would be better for me.

  I know I should be able to get the 16 GB of RAM, which would be much more than the 6 GB it holds. I only NEED 1 firewire port, but having 2 would be nice.

  I don't have a lot of money to update everything, so I'm trying to get what I need, and then I can save the rest.

  HP-Pavilion p6716f

  Windows 7 Home Premium

  64-bit operating system

  I have not upgraded the PC anyway, it is still stock.

  Thanks in advance for your help.

  You are welcome.  Thank you for the additional information.

  When upgrading memory, you must always match the memory that is already installed.  Otherwise, the new memory may not be compatible.  The motherboard of your computer is the Architecture Dual-Channel.  Therefore, it is better to install matched sets.  This is the memory that is recommended by Crucial.  They make very good memory.  In fact, HP uses their memory in a large number of their computers.

  This is a Firewire card that should work for you.  It has 3 external ports; (400 Mbps)-a 1394 and 1394b (800 Mbps).  If you decide not to buy this card, it is a good example of what you need.  You can watch other on Newegg to see what else is available.

  Please click "Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.