brand/model of WLAN adapter

Similar Questions

• Satellite C650 and WXP - cannot install the driver for WLAN adapter

  Hello

  I have recently 'come down' Win 7 to Win XP on my laptop because the software I use works best from XP. It's a pain because of the SATA drive, I needed to streamline a facility etc... but now, I'm happy to announce that I am in place and running under XP with one small exception...

  I can't get my wireless adapter to install.

  The LAN adapter ' Atheros AR8152 PCI-e... ' is installed and running

  Plug-and-play find a "network controller", but it cannot install it and leave her with the formidable yellow '?'

  I have visited the support site, entered my details laptop and downloaded the appropriate drivers, but they don't seem to want to settle. File self extract and then never run the Setup, as Toshiba only I downloaded self-extracting exe files, I have no file inf etc. try manually.

  Any suggestions welcome because I ran officially ideas

  What Satellite C650 do you have exactly? I can see on the Toshiba download page there are 4 different models. One you have?
  Check it please sticker post name of exact model so that we can check the specification s notebook and see what WLAN adapter is inside and the bottom.

• Tecra S1 - WLAN adapter and which WLAN driver

  Hello

  I use a recently purchased pre-owned Tecra S1 (model PT831E with Intel Pentium M 1, 5 GHz).
  I am unable to know which WLAN adapter is built in this book. No wireless network adapter appears in the Device Manager pane. I downloaded all the Tecrta S1 WIFI drivers from the Toshiba Download Center. I tried to install, but none worked.
  Can someone tell me how to identify the right WLAN adapter and which driver to use with it?

  Thanks in advance

  e trader_2002

  Hello

  I found the news following the wireless cards are compatible with your laptop model:

  LAN card wireless (802 11b Agere) PA3189U-3MPC
  PA3266U-1MPC (Intel 802 11 b) wireless LAN card
  PA3236U-1MPC (Atheros 802 11 a & b) wireless LAN card
  PA3267U-1MPC (Intel 802 11 a & b) wireless LAN card

  I don't know which you have, but all drivers should be available on http://aps2.toshiba-tro.de/wlan/

  Good luck!

• Satellite L300 PSLB8A - cannot locate the WLan adapter after downgrading from Vista to XP

  Model - L300 Satellite PSLB8A-01F004
  Australian model
  Place of residence current UK

  Happy new year to you all. I have a problem with the adapter wireless following a downgrade from Vista to XP Pro home. Device Manager indicates that a network adapter, which is the LAN and it does not work properly.

  I have two points with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

  I find all the major engines of the Toshiba Australia but he lists three (I think) site possible WLAN - Atheros, RealTek, and one of the other manufacturers.

  I tried all three without success but am willing to acknowledge that I can have a mistake, perhaps by installing all three drivers at the same time for example.

  The indicator on the front of the box portable wireless lights on or off with the hard switch setting.

  I am also unable to locate the display of all available wireless netrworks, this can be a symptom of the driver is not installed.

  I tried to locate the wireless card, but it doesn't seem to be accessible through the background panels, including the Panel of RAM module.

  Any ideas please?

  > I have two Articles with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

  The Ethernet controller is the WLAN adapter.
  I guess that the WLan driver is missing and so the wireless network card does not appear under network adapters

  Please check this Toshiba How TO:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will help you find the right WLan driver for this chip.
  and here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  good luck and good news 2011 ;)

• Satellite A210-14 - strange problem with new WLAN adapter Intel 4965agn mm1

  The initially installed atheros wireless network adapter is just b/g and too slow for my network/needs

  So I bought a one n-project: mm1 4965agn (intel) (he got a toshiba p/n and s/n too)

  I replaced the atheros one and plugged the Intel - booted and installed the drivers - restart-> adaper works very well-> reboot - nb stops at the toshiba BIOS screen without loading all the windows. I can't even to the BIOS-> removed Intel wlan adapt nb boots and as usual.

  Please let me know what I need to do to make things work

  Hi chubbyhamster,

  To me, it sounds like this map isn't WLAN compatible with your laptop. I guess that all wireless network adapters are compatible with all laptops (assignment of pins e. g.).

  As far as I know use fast N project you need 3 antennas. I think Satellite A210-14 has just two antennas because only WIFI b/g card built in. This means that you can upgrade your laptop to the project speed N t.

  Alternative you can use the LAN card or a USB key which takes in charge the project N, but in my view, WIFI b/g standard should be fast enough

• Satellite L515-S4960: ESata port can be used for LinkSys WLan adapter?

  Buy Toshiba L515-S4960 laptop, bought a LinkSys RangePlus wireless notebook adapter, but I did not yet find a port to plug in.

  I wanted to extend the reach of the signal from my router.

  The place above the eSata port opens to support an adapter?

  I don't want to tear anything in amont.*

  No, you cannot use the eSATA port for the use of the USB WLan adapter.
  You can only connect compatible external devices that support eSATA port!

  As far as I know a laptop to LinkSys RangePlus wireless adapter is a PC card that supports a CardBUS interface.
  You can use in only in the PC card slot supports CardBUS as well.

  Check you manual use if your computer supports the PC card CardBUS (32 bit) slot.

• Z580 - WLAN adapter problem

  I've got Lenovo IdeaPad Z580, with Core i7, 4 GB of RAM and 1 TB of HARD drive processor.

  A few months ago, I noticed that my BONES sometimes would freeze (make this beep sound freakin ') if I moved my computer too fast in my office (weird). She got worse a few weeks ago and seems to be somehow connected to my wireless network adapter.

  It especially simply - nothing works. Switch WLAN disappears from the BIOS configuration, etc., like it wasn't even there. If I'm lucky (as I am now), it would work somehow. All of a sudden appears again in the BIOS etc. I can even use it on my Windows 8, but... If I propose a little my laptop, it will suddenly freeze and restart causes WLAN adapter not in the system at all, or the connection is de-energized ("metered" stuff etc.). Restart adapter according to the results of system in "find no WLANs", wlan switch endangered or gel.

  I tried to reinsert the WLAN card, it sorta fixed stuff when I did it for the first time, I had a week or two without a problem, but he returned and reintegrated support is no longer.

  First question what I can do with this adapter WLAN problem?

  Second question is - while doing all this thing reinserting, my screws are a little bare now (but not completely, it is possible to get them unscrewed without any problem) because I have not noticed my screwdriver is broken and ruining. My laptop is still covered by the warranty? I do not have removed or broken any warranty seals in the process well, just the screws.

  I forgot to mention, by WLAN adapt is Atheros AR9485WB-EG.

  Information on repair mentions setting parts disconnected.

• Unable to apply the model of WLAN to the controller through WCS

  Unable to apply the model of WLAN to the controller through WCS

  1 update your config all of your controllers of WCS. Go to configure---> controllers--> select all controllers.
  2. in the drop-down "Select", choose "refresh the configuration from the controller and select 'Go'."
  3. choose Delete therefore WCS will take the last setting of the WLC and select 'go '.
  4. remove the WCS WLC.
  5. Add WLC to WCS.
  6 try to set up the model again.

  Also, you can upgrade to 6.0.170 as there are to many model feature bugs that have been fixed in this version.

  http://www.Cisco.com/en/us/docs/wireless/WCS/release/notes/WCS_RN6_0_170.html#wp44440

  -nael

• OVD adapter Question using the model ' OAM/ADAM adapter with map.

  I'm creating adapter to ADAM using model 'OAM/ADAM adapter with map' in 11.1.1.7.0 using DOHADOVD.

  obpasswordhistory, obpasswordexpirydate, obLoginTrycount, and obLockouttime fields are not displayed in TPM. They are present in the ADAM instance.

  Any thoughts on how to add these missing fields in TPM?

  You must extend the schema of the OVD as well. You can refer to the documentation of production

  http://docs.Oracle.com/CD/E27559_01/admin.1112/e27239/shared.htm#CFFEJEEE

• Equium A60-157 - PCMCIA or USB WLan adapter

  I have an Equium A60-157 and you want to add a wireless adapter.
  Can someone advise me on a PCMCIA or USB adapter suitable for this model.

  VIN.

  It s indifferent if you buy a card PCMICA WLAN or WLAN USB stick.
  My opinion would be a USB key, because you can use it on a PC too.

  I put t have much experience with these WLAN sticks but I would buy one from the manufacturing of your router. For example, I have a router of AVM and a stick of AVM WLAN.
  So you can be sure that s has no problems because you have from different manufacturers.

  I hope I could help a bit.

• XW899AV upgrading to 5.0 WLAN adapter

  I just bought a DVT7 Quad Edition model with WIFI B/G/N + Bluetooth XW899AV computer.  I discovered that it does not support wireless 5.0 band.  Can you tell me what HP built-in wireless adapter offers I can get upgraded my WLAN to double capacity band?

  howiebyu wrote:

  I have the card Intel WIFI Link 1000 BGN installed.  So to do that, I'll have to order another card that works on both.  I guess the question is what is the difference between 1 x 1, 2 x 2 and 3 x 3 I've been watching the cards?

  The 1 x 1 means one channel = up to 72Mbps, 1 x 2 = 150 Mbps, 2 x 2 = 300 Mbps and 3 x 3 = 450Mbps. get the Intel Centrino 6230-631956 - 001, is a 2 x 2 dual band wifi card up to 300Mbps (2.4 GHz and 5 GHz).

• HP ENVY 15 Notebook PC: Which Intel WLAN adapt to choose for replacement?

  Hello

  I am looking for an Intel WLAN with Bluetooth adapter to replace mine with (laptop HP ENVY 15, product number: K2T39AV).

  I wonder if the product is compatible with my HP laptop:

  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-8265-brief.html

  In addition, what is the current best cards Intel (with Bluetooth and Wi - Fi broadband) which are compatible with my laptop?

  Best,

  Rhéaume

  Dear customer,

  Please go through the below document, select PAGE-23

  http://www.HP.com/CTG/manual/c03943414.PDF

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Satellite Pro M70 - WLAN adapter is not listed in Device Manager

  Hello!

  I just formatted my drive and reinstalled Windows xp and now I can't turn on the wifi. The light is on and the switch is on but it does not work.

  I downloaded all wlan drivers but nothing has worked. In the Device Manager I also can't find any WLAN card. In device manager there is an icon * devices * with a qustion-mark and he said * network control *.
  This is the WLAN card.

  Until I reinstalled Windows it worked fine so the problem is not mechanical.

  Help, please. my laptop satellite pro m70, don't model no psm76e/00e005g3

  Hello

  If the normal LAN card is already recognized correctly need wireless network card, then you should try to install the WIRELESS driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, the local network card device can be activated with the hardware switch on the computer laptop and FN + F8.
  Check it!

  Good bye

• Can not activate WLAN Adapter

  Hi, I have a Satellite M40 (PSM40C), but the wireless LAN adapter will not be activated after power on, the same with the switch wireless power. I had the same problem 5 months ago. I installed last BIOS Uptade was fine, but now, I had the same problem again...
  can someone help me?
  THX!

  Hi, Omer

  I don t know what is happening with your unit, but if the WLAN switch is on and the orange led is on check use FN + F8 key combination to activate the wireless network card.

  If you start ConfigFree tool Conectivity doctor tab you can see if the wireless card is active or not.

• Satellite Pro 6100 - Question on WLAN adapt and mac address

  I bought a second hand of Satellite Pro 6100. It has a WiFi adapter. It is where and how do I know the macadress of the adapter?

  Thank you.

  Hello

  If you are sure that this laptop was equipped with the Wlan card, and then the MAC address can be easily discovered 100%.
  You must start the console with the command: * CMD *.

  Then use the command: * ipconfig/all *.
  This would list all the details on the WLan/LAN cards installed in the laptop.
  The physical address means MAC address ;)

  This should help!