Satellite Pro 6100 - Question on WLAN adapt and mac address

I bought a second hand of Satellite Pro 6100. It has a WiFi adapter. It is where and how do I know the macadress of the adapter?

Thank you.

Hello

If you are sure that this laptop was equipped with the Wlan card, and then the MAC address can be easily discovered 100%.
You must start the console with the command: * CMD *.

Then use the command: * ipconfig/all *.
This would list all the details on the WLan/LAN cards installed in the laptop.
The physical address means MAC address ;)

This should help!

Tags: Toshiba

Similar Questions

  • Satellite Pro 6100 has no Wlan

    Installed xp on a Satellite Pro 6100 and it has no wireless network adapter in the Device Manager to all, and it does not appear in "Found new hardware" or whatever it is.
    I downloaded the drivers, but I can't put anywhere.

    Remember that the wireless card is an option on this laptop.
    This means that some Pro 6100 was delivered with the WLan card and some does not support the minPCI wireless network card!

    If the WLan card is not listed in the Manager of devices (or as unknown under network adapters device) then the laptop was not equipped of the WLan card and so you cannot use the WLan.

  • Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

    Hi all

    I'm new to this so hope I'm posting in the right place.

    I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

    The first problem is that the battery is fully charged, but the icon on the screen says 0%.
    He fled feeding okay and if you disconnect battery lasts for all time and a half.
    If I try to defrag it does not have enough power?
    So I have to defrag in safe mode.

    The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

    Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

    Oh am running windows at home.
    Thanks in advance.

    Eve x

    Update the BIOS and set the default values.

    You could try reinstalling the common Modules for Toshiba and energy savings.

    If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

  • Need a plan of construction or images of Satellite Pro 6100 for BT / WLAN position

    Hello

    I need a 6100 construction plan or some pictures of the location of the device Bluetooth and WLAN.
    This parts are modifiable or not?
    Because I have bad RTC 6100 with WLAN and Bluetooth and another who works without this two devices so I want to build this parts in the workbook, but I don't know where they are or if it is possible to do.

    Thank you

    Here is the plan for the two, BT and Wireless Lan for the Toshiba 6100
    http://Weller.WS/Toshiba/antenna.html

    The BT card slot is accessible from the bottom of the laptop. (just a screw to lose)... you will see the pink BT antenna wire there, too.

    Internal MiniPCI wifi requires that you remove the keyboard first (two screws covered by plastic on the top of the F1... F12 keys) then open a plastic cover that hides the Mini-PCI card (the location is where would be the "F6" key). It requires a force to remove this plastic cover ;)

    Concerning

    chain

    P.S. All additional cards (BT and WiFi) are sensitive parts of static electricity. If you plan to trade on your own, take the necessary precautions. If you are not familiar with this, please consult your nearest Toshiba service.

  • Satellite Pro A100: Question about RAM upgrade and warranty

    I just bought my machine and Ive decided to install some more ram. No one knows if it will affect my Gurentee. I can't find anything on the Web site on this topic. Should I get a Toshiba to install official repairman or something?
    Thank you

    Hello

    Please check you user manual. Usually, the slot memory must be placed at the bottom of the unit. If you remove the cover, you should see the slots.
    Usually memory upgrade procedure is described in the user manual so you can upgrade the memory yourself and the procedure of upgrading doesn t affect your warranty.
    But please make sure you use the right modules.
    However, you can also contact Toshiba for the upgrade of memory.

  • Satellite Pro 6100 often randomly turns off and bad RTC error

    Hi, I recently bought a sp6100 and it worked fine at first but now it goes out often random and comes with BAD RTC ERROR at startup. As a musician who uses the pc, it is very painful and I lost much of my work. Anyhelp would be great. Conrad

    HI Conrad,.

    Power loss random is usually a symptom of overheating and can usually be cured by cleaning all dust and lint that built into the CPU radiator. A vacuum cleaner is a useful ally in so doing. Just put the hose against the grids of aspiration air for a few seconds.

    The RTC error refers to the adjustment of the real time clock which is normally held by a small battery, usually mounted on the motherboard of your laptop. It is used to maintain the settings of the BIOS (including date/time) and is completely separate from your main laptop battery. Modification of the RTC (or CMOS) battery will involve some disassembly, so is best left to an authorized Service partner.

    Kind regards

  • Satellite Pro 6100 - Question about 420 GB NVidia

    Hello

    My nvidi 420 GB Module is defective.

    can I put my system with an another grapficadaptor?

    If not, where can I buy a graficadaptor go 420 nvidia used in Germany?

    What types of toshiba satellite laptops use a compatible type of this graphicadaptor?

    Concerning
    Abfatzen

    Hello

    AFAIK you can use only the graphics card that was shipped with the laptop. In this case, it s a 4 GB 420 nVidia.
    If you want to buy those that you should ask the agent for service Toshiba for this part.
    On the Toshiba site you can find the responsible ASP in your country.

    Good bye

  • New on Satellite Pro 6100 WLAN card installed, but can not be activated

    Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

    I tried upgrading to the latest version of BIOS
    I reinstalled the latest drivers
    Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
    Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

    Past and present, wireless card fail to see any network.

    Martin

    Hello Martin

    This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

    I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
    What do you think of this?

  • Satellite Pro 6100 cannot start - message PXE - E61 and PXE - MOF

    My dad just bought me a satellite pro 6100 for United off ebay and when I turn it on the toshiba screen comes up, followed by: PXE - E61 and PXE - MOF. as I am a total blank computer I have not a clue what to do! any ideas...? :)

    Hello Naomi

    Don t worry, it sounds not very badly. I think that you will solve this problem by changing some settings in the BIOS. ;)

    To my knowledge, this message appears when the LAN option has been fixed at the beginning of the boot order. So solve this problem to get into the BIOS (ESC and F1) and then change the order of Boot CD Drive drive HARD etc...
    Please set the LAN at the end.

  • Satellite Pro 6100 memory upgrade

    I don't have a model of toshiba satellite pro 6100: PS610L-04NVN of Singapore and it currently has 256 MB of pc2100 memory installed and I am wanting to install another 256 so I have 512, but now I would like to know:

    1. If I get the memory of a vendor of kingston, it'll work with this laptop, it is has 2 different types of memory, because there KTT3311 (333 mhz) & KTT3614 (266 mhz)?

    Hello

    The memory module manufacturers are not very important. But of course the modules of memory "no name" performance not as good as other modules such as Toshiba or Kingston.
    Module properties are very important. This unit uses PC2100 DDR - RAM modules.
    I found compatible modules:

    PC2100 128 MB (PA3126U - 1 M 12)
    PC2100 256 MB (PA3127U - 1 M 25)
    PC2100 512 MB (PA3164U - 1 M 51)

    If you use the same modules and only the speed is different so the laptop will use support at reduced speed.
    In your case a module supports and other at 266 MHz 333 MHz. The laptop will support at 266 MhZ.

  • Satellite Pro 6100 BIOS upgrade question

    Hello

    I have a toshiba satellite pro 6100 and currently it has 1.60 bios version and saw that the last update of the bios is the 1.90. My question is: is it question where I get the update of the bios of wheather it is from the site of toshiba UK or the United States, is the same bios update, or are they different? The other question is what I have to do the previous bios updates first 1.60 1.70 1.80 and finally to 1.90, or can I just do the 1.90 and who will have the previous updates in that one later?

    Hi Christian,

    I normally prefer to get the update of the BIOS in the same country as I bought the laptop. However, given that the laptop was probably manufactured around the world, I don't think it bothers us really until the update is marked as compatible with your model of laptop. In principle, the update of the BIOS for the components of the laptop and is therefore more linked to the actual model in his country of origin.

    It is not normally necessary load the intermediate versions of BIOS as BIOS is usually not cumulative but is provided as a complete package and includes all the code required.

    Kind regards

  • No WLAN on Satellite Pro 6100 light

    Hello
    I have a Satellite Pro 6100. But there is no Wlan light, if I turn on the wlan switch. I did a Bios Update to 1.9, but wifi does not work.
    Is it possible that the on-off wlan switch is damaged, or what could be the problem?

    Hello

    Did you check if the wireless card is already preinstalled on you laptop.
    Have you ever used this option?

    I agree with you... it of not impossible that the WLan switch on the side of the laptop is broken.

    The switch allows you to activate on the motherboard and allows the WLan antenna.
    If there is a hardware malfunction for example a loose contact outside help is necessary. In this case, the ASP must check the unit

  • Satellite Pro 6100 - how to change the date and time in the BIOS

    Hello

    I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

    When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

    I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

    How can I change or update the time in the bios?

    Thank you

    Hello

    I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
    You can activate Windows by phone?

    Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
    Usually in the configuration of the BIOS you will find a brief info how changing the values.

    Check this box!

  • Satellite Pro 6100 turns off when I connect the power adapter

    Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
    Any ideas would be appreciated

    see you soon

    Hello

    You use original Toshiba AC/DC adapter or another?
    What happens if you connect the AC/DC adapter, while the laptop is turned off?

    It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

  • Need to drive caddy HARD and coverage for Satellite Pro 6100 HARD drive

    Does anyone know the part numbers or to get a hard drive caddy and the Satellite Pro 6100 Series hard drive
    Thank you

    What caddy did you? Internal an external 2.5 USB caddy for a HARD drive or the case?
    I think that if you need a domestic framework for laptop you should order it since the maintainer authorized Toshiba in your country.
    I think that guys should be able to order something like this directly from the Toshiba store

Maybe you are looking for

  • My iPad lists the city like my hometown...?

    How can I fix my iPad.  It's my home town wrong.

  • In the terminal, I can't type the (tiny) letter 'e '.

    2015 MBP, entirely updated OSX I opened a terminal window and if I type the letter 'e' (without the quotes of course) it beeps and tape not the letter.  All other letters works very well in the terminal.  Upper case E also works.  Just under E. In al

  • FaceTime works on iPhone, but not on Mac Book Pro

    I can click on FaceTime with iPhone but when I try to use FaceTime on Mac Book Pro, nothing happens that he does nothing when I click on a contact to establish a connection.  Don't know why?  I tried to locate preferences when I open FaceTime app on

  • Rearrange Windows 7 icons that I look

    Many people arise on the icons that rearrange after reboot.  My question is the icons coming spontaneously out of alphabetical order, normally when they are obscured by other windows.  But I finally saw it happen when I was doing nothing.  I have aut

  • Display of UI elements customized timeline in the monitor of the sequence

    Is it possible to display UI elements customized in the area highlighted in red?I'm looking for a way to highlight some frames in sequence monitor in Premiere Pro. For example, imagine my plugin made some changes in the frame of 10, 16, 20. I would l