Brand new computer is Super slow facilities issues

Similar Questions

• Custom: error message with brand new computer

  I took my brand new computer.  Did everything that could be transferred from my old computer to new computer.  I get an error message when I turn on this new computer first.  This is a 2 part message.

  Error message #1: there is a problem starting C:\Program HP Photosmart HP 7520 series\bin\HPstatus BL.dll

  message 2 appears on the screen of the notebook:

  [. ShellClassInfo]

  LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787

  What should I do to fix this?

  I would like to uninstall everything that touches on the printer series HP Photosmart 7520. Condition monitoring program is configured to run at startup, and something is not compatible between the old computer and the new. The last 7520 driver package and utility for Windows 8 and does not say it is compatible with Windows 10 If you want to try to reinstall on Windows 10 using compatibility mode.

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462#Z7_3054ICK0KGTE30AQO5O3KA30R1

• updates to Windows 8 on brand new computer

  Hello

  I just unpacked a brand new Acer Aspire.  I understand that it is preloaded with 8 64-bit windows.  The windows store said I could upgrade to windows 8.1 but I should update windows 8 first. I changed the settings, update manually and searched the updates of windows 8 that were a little more than 100. I asked to install 87failed them, but about.  I could get on the desktop and the glance at the history of the update - clearly says update failed.  Tried troubleshooting windows update which said it corrects a problem with admin rights and tried again.  Same result - impossible to download anything, just stuck on the download screen.  Searched your forums and have now tried a system restore before the effort to update at all.  I'm a little afraid of what to do then - seems like my brand new computer is screwed up in 4 hours!   Grateful for the advice...

  System a i5 processor, 500 GB hard drive... Seems to have McAfee on this too - have not disabled because it would be on automatic updates.  The only thing I did on this topic before you try the updates was to set up my windows account (I have already one and if it was just a matter of putting on this computer that worked)

  Please see "answer" below for more information - do not seem to be able to edit this post until I had posted a response...?

  Hello

  You only really need the KB2871389 update... Upgrade to Win 8.1 will take care of the rest...

  BTW... Be sure to create some Recovery\Reinstallation support that is available on your machine...

  Once you go to 8.1 win the built-in functionality your machine to FACTORY Recover\Restore most likely will not work...

  Since you already had to do a system restore, you may just want to factory restore now, but burn the media first... Then you will start fresh.

  Also... more pre-installed OS are the original version, so the more you buy a machine after the first version you can expect to need updates for each month that goes by...

  Once a Service Pack is released the latest machines can have, and update the counter starts again.

  8.1 win is not called a Service Pack, but it's basically the same thing...

  One more thing... it is a very bad idea to try to install 100 updates at a time. It should work, but in reality, it is a disaster to delay... Especially when the .net Framework updates are in the mix...

  Do first in groups of the same version and let your CPU usage back to 0%, before doing anything.

  Don't even make a required reboot until it happens. There is a background installation that spans a long time after their installation that same Windows Update says that they are finished. They are not

• There is no VGA Jack on the back of my brand new computer! There are DVI and HDMI, but not VGA!

  Brand new HP Pavilion p6745f computer. Time to connect, create a boot disk, install Kaspersky Anti-virus and then see that old programs will still work. The first step, hook up monitor... OK... hmm... no plug VGA input. There is a white DVI and the black input HDMI but... huh? Should not be a VGA? The monitor is only a couple of years... Has anyone seen this?

  Pretty much any store of electronices, you can purchase a DVI - I to VGA Converter. That's what you need to be able to use your old monitor.

  
  Best regards
  ERICO

• Brand new computer laptop dv6z-7200 of envy has crashed after downloading updates from the window 27. ~

  I have a new notebook from dv6z-7200 desire I'm just to start this topic and it locked up and crashed. I restarted in test mode, it and ran the tests got an ok on everything. Then, I got a message saying that he would attempt a repair. Unfortunately, who did not, now he broke down again and I can't seem to do anything.i let windows update download 27 updated both swing myself for this. I think I should have downloaded one or two at a time, and then a reboot. now what should I do?

  I used to be snow white, but I drifted...

  Thanks for the reply. F11 does not work. laptop does not just start. try, but crashes. I disconnected and removed the battery for 30 seconds, replaced, tried again. nothing.  restoration will not be a big deal like it was brand new and I have had little on what anyone on this subject yet. you contact HP support. Thanks again.

• Windows 7 Build 7601 not authentic on brand new computer

  Purchased my Lenovo to Fry mid October 2012.  Have already experienced several BSOD right after that MS updates were installed every time.  A few days ago, I met several BSOD right after that the Windows updates were installed.  On the last BSOD, I get the message Windows 7 Build 7601 not authentic.  Nothing I tried as suggested on screen worked, amounts to the same thing.  I am a student full time online.  Fall semester ends on Sunday, December 16, and I'm way now behind on all my homework back and my final exams in all categories.  It does not help and I have not the time to take my computer to Fry for them to take a look.  All my data is stored here.  In addition, I tried to restore to another time, when you restart the message was still there then I turned off and when rekindled later it had disappeared, but returned for the next day.  I tried to restore againn but this time it won't go away.  I don't know where my product key is, as it is not on the computer itself.  It may be on a manual but I have since moved and had the movers help me and they put things in the back of my storage unit or in boxes not recognized.  So until I go through everything in my storage unit I'm screwed.  Please help as soon as possible because it's really me screwing.

  Thank you

  Denise

  You install the driver from Windows Update updates?

  If so, I would avoid their installation in the future and instead to download any available hardware updates directly from the manufacturers Web site.

  I also suggest that when you get a new computer and you start for the first time, you must create a system restore point.

  As each new Windows 7 PC should come with a COA sticker that is attached to it, this is one evidence of a genuine license installed on the machine. If you bought it on shelf, its possible someone could have pulled off the sticker.

  Always check for a real sticker or buy any of the machine.

  It seems that you have bad luck with Fry, FRY well their business and the purchase of another where, there is nothing particularly special to their topic. Try to buy directly from the manufacturer online or try another store, if you live close to a Microsoft Store, you can go.

  Sorry for all the problems that you are experiencing, we are just volunteers here who are trying to help other users of Windows.

• have acrobat 6.1 and have updated new computer with windows 8 compatibility issue message get

  have acrobat version 6.1 bought a new computer with windows 8.  tried to install but received message there are compatibility problems.  Noticed when I press print option not you adobe option.

  Acrobat 6, released in 2003, replaced by version 7 in 2005. If your software is nine years older than your operating system. This is rarely a good combination.

  If you upgrade your operating system, you should think to upgrade your software too.

• Cannot connect to internet after Windows update. With the help of windows 7 on a brand new computer

  Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work...  It says something about "connects to the DNS servers.

  So I did a system restore to an earlier time, and the internet works fine...

  which ____ should I do?

  Hi 31aboy,
   
  Welcome to the Microsoft Answers community.
   
  Try to install the update to windows in clean boot mode.

  To enter the mode of clean boot on your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. now run windows update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
   
  Steps to view the windows update history:
   
  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• My computer is super slow

  My computer is slow (especially when I'm online it really drags) and my hard drive is reduced every day I don't know why. I save nothing in my HDD, I save everything in a usb flash drive. I do my regular maintenance, defragment, clean disk, run MSE and windos defender. 18.6 GB I am to 7.35 GB, my computer is a Windows xp (with windows8) and DELL. I hope this is enough information for a response.

  P.S. I noticed that my computer runs more slowly when trying to surf the web or I'm I watch videos on my computer. It was a pain. It wasn't like this before, he had run well before being a 7 year old computer. Thank you before hand.

  M.J.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Add-Remove-Programs-screw-up/a0aa0dcc-ABEB-4a95-A118-aefce6319c5a

  Zhang Stanley has a very good answer for the optimization of your computer.

• I am trying to download CS5... I had to buy WinZip... and it still does not... I am downloading on a brand new computer... Augh... Pointers?

  I had CS5 on a single computer for 2012... my computer is about to die, so I bought a new today... and I can't seem to download CS5... I would gladly buy the CC group... but my internet (Satellite Dish) is incomplete at best... I want something I can work on the same when it's raining outside!   I can't believe I was made to buy WinZip to download CS5... and then it would not download!  I know this isn't the computer... I have a lot of space and graphics... I'm so over this...

  Please see the link Download CS5 products. Please make sure you download the file 2 as well, it will extract the 7z for you.

• Remove non-essential programs of the Lim on brand new computer

  What non-essential programs safely remove in my HP Mini 110-3131 dx that were added by the manufacturer, or Windows 7?  I'm winning more space on the hard drive.  I don't want to delete everything that would be essential to the operation of the computer.

  Also tell me how to know to which e-mail address I used when I signed up for this forum.  Thank you.

  None of those that are essential. Most of them adds functions such as reading/burning CD/DVD. EverNote is a useful application that I use for storage of information and notes, a bit like a Notepad endles. You might want to look first. The HP Documentation is usually manual and instructions on the mini and its functions.

• Brand new computer and Windows Update offers updates of pilot

  I received a custom build e9280t yesterday and did the thing of the installation and migration.  Windows Update offers already updates for the ATI Radeon HD 4850 video card and JMicron JMB36X controller.  I guess I have several questions.

  1 can I install drivers provided by Windows Update

  2 How often should I update drivers?

  3. in the case of the video card should I update from Windows Update or ATI?

  4. If I install ATI should I install the ' ATI Catalyst™ 9.11 Suite for Windows 7 (64 bit) "or simply thedriver only option of the ATI Catalyst™ 9.11 components for Windows 7 (64 bit)?

  I have a card ATI video in a long time and the outcome of pilot and the options have always confused me with what must be downloaded and installed.

  Thanks for any help.

  John181818 wrote:

  I received a custom build e9280t yesterday and did the thing of the installation and migration.  Windows Update offers already updates for the ATI Radeon HD 4850 video card and JMicron JMB36X controller.  I guess I have several questions.

  1 can I install drivers provided by Windows Update

  2 How often should I update drivers?

  3. in the case of the video card should I update from Windows Update or ATI?

  4. If I install ATI should I install the ' ATI Catalyst™ 9.11 Suite for Windows 7 (64 bit) "or simply thedriver only option of the ATI Catalyst™ 9.11 components for Windows 7 (64 bit)?

  I have a card ATI video in a long time and the outcome of pilot and the options have always confused me with what must be downloaded and installed.

  Thanks for any help.

  John, here are the answers to your questions:

  (1) Yes, I would.  I wonder however, no offer to update your BIOS before checking further.  Updated HP has been known to be incorrect.  A failed BIOS flash makes it an expensive boat anchor.

  (2) update as soon as there is a new driver.  Manufacturers use updates to fix problems.

  (3) it's up to you.  I don't think that HP makes changes of owners of the video cards in their computers.  So, if it were me, I would use those ATI/AMD.

  (4) go with the 'Software Suite '.  This includes some cool utilities to adjust your map.  One of the features that I like is "Overdrive".  It allows you to overclock the card and adjust the speed of the fan on the fly.  I'm still using XP Pro SP3, but the last consequence works very well with my 4870 XXX 1 GB.

  I hope this info is useful.

• Driver of HP all-in-one Officejet 7310xi fail always complete the download on brand new computer

  I'll just my computer a few weeks ago.  It has windows 7.  I've added very little for her yet.  I tried repeatedly to download drivers for our printer.  I am not trying to use the cd that came with it, but it was for earlier operating systems.  What can I do to get this to download?  I really need my printer.

  Hello

  You use the Setup Wizard for printing a method in this paper.  It should guide through you the installation

  Print the installation wizard

  Click on the + to expand the section in the method and follow the instructions in the Installation Wizard to print.

• Our impressions of iP4950 Canon are too dark. Brand new computer. Any tips?

  Run us Windows 7 on a Dell computer and have the printer above, but impressions are too dark.  Have changed cartridges.  No difference.

  If you have selected the correct printer profile for the paper and that you use the inks and prints are still too dark, you need color calibrate your screen. See http://windows.microsoft.com/is-IS/windows7/Calibrate-your-display.

  Your problem is that the image of your screen is too bright.

• 17 Firefox crashes on my brand new computer. He did this 9 times within 10 days that I find unacceptable.

  I hope someone can help me solve this problem.

  Thus, his problem with your Addons (Extensions).