Bridge and Photoshop CS5, opening of the bridge Photoshop files

Similar Questions

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• Photoshop 2015.5. PS does not update and will not open. Missing 4 dll files.

  Photoshop CC (2015.5). PS does not update and will not open. Missing 4 dll files.

  VulcanControl, VulcanMessage5, tbb and ScCore. PS worked fine earlier today and has worked great for over a year.

  Windows 7 update to 10 eight months ago.

  Exit code: 184

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 1 warning (s)

  FATAL: Error (Code = 184) running the 'MoveFileCommand' command for package: 'AdobePhotoshop17-Core_x64', version: 17.0.1.159

  FATAL: An error has occurred in the installation of the package (name: AdobePhotoshop17-Core_x64 Version: 17.0.1.159). Error code: "184".

  WARN: Cannot move the card to the address 'C:\adobeTemp\ETRD35C.tmp\1\Application\Required\DynamicLinkMediaServer\32\libmmd.dll' to 'C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Required\DynamicLinkMediaServer\32\libmmd.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify.

  Hey gene,.

  Thanks for getting back to me. I uninstalled and re-installed PS and everything seems to work very well. Put same Lightroom update. Not sure what the problem was.

  Thank you

  Clay

• Windows XP, the power option button is gray and does not work. The hiberfil.sys file occupies all the available space.

  I can't install the updates, especially antiviruse updates and everything is slow because the hiberfil.sys file is huge.  I can't Devil Hibernate because the power button is gray-no matter how or where I'm trying to open it.  Also at the same time, the sound disappeared and the sound card displays a yellow button.  Difficult to use the computer and dangerous online.   Help!
  Eve

  Hi EveMontgomery,
   
  You can disable hibernation by running the hotfix given below article tool to solve this problem:
  How to disable and re-enable hibernation on a computer that is running Windows
   
  To solve the sound problem, follow the three steps solution given in the link below and see if this helps you.

  No sound in Windows

• Error - Cannot open because the hal.dll file is missing at startup of Windows.

  Original title: Hal.dll missing.

  When I turned on my comp., he said he could not open because the hal.dll file is missing.  File downloaded from another computer of zip drive and plugged in, but nothing happened.  Now what?

  Hi wendy1960,

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link & check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information.
  Please post back and we do know.

• Acrobat DC opening causes the Adobe AcroCEF file to multiply in the Windows Task Manager

  Acrobat DC when open causes the Adobe AcroCEF file to multiply in the the Task Manager Windows and the CPU goes to 100%. I have a screenshot of Task Manager to show you what I mean. I have to close Acrobat to make the file stop multiplying itself. Also cannot save the workbook file after attempting to combine PDFs into one file. I logged off creative cloud and back again and I have also uninstalled and reinstalled the program, but the problem persists.

  

  Right-click your shortcut icon, go to compatibility and "run this program in compatibility mode for: Windows XP (Service Pack 3)".   I have also "run this program as Administrator" checked... but who did nothing by itself.

  This solution has cured my problem.

• Just installed OS Yosemite and now cannot open Indesign and Photoshop files

  Just installed Yosemite on my Mac, and now when I try and open my existing Indd files, I get say an error message ' can not allowed or doc can already be opened "." Photoshop files will not open due to the "disk error". My live files on a network drive of the company I have to open a session.

  Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705

  10.10 mac. ? sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

• Mac Book stop with the movie in the dvd player, and now it opens in the reset password screen?

  I'm running OS X El Capitan 10.11.5 and my daughter and her friends used to watch a movie last night and stop it before releasing the film. My Mac Book Pro is the start of the password reset screen/mode? It gives me only 3 options, none of which is true. (1) I forgot my password. (2) my password does not work when you connect 3) my keyboard does not work when you type my password to connect? When I opened the Apple on lft albums he gives me a boot disc, restart and turn off? I tried all the options and it restarts just on the same page? Someone at - it advice? Thanks in advance!

  The appearance of the password reset screen indicates FileVault2 is enabled on your MBP. Fix?

  If so, that'll probably get you out this Pickle: https://derflounder.wordpress.com/2015/01/17/yosemites-filevault-2-pre-boot-reco very-options /

• I can't click on a limk in an email and have it open in the browser after update tp 38.0.5

  I use Thunderbird for my e-mail address. Before the update of Firefox I could click on an email and the link opens in the browser. Now ir is not.

  IE windows open. Go to the settings menu. Reported by default in IE
  Web browser. Do not turn on the "check if default" option. Close IE

  Now, open Firefox. Type of topic: preferences #general< enter > in the
  address bar. Make Firefox the default browser and activate always check Firefox default browser.

  This can solve the problem.

• Aurora is advertised as a windows application 8, and yet it opens in the desktop section of windows, can it be opened in the application of half of windows 8? It would be more useful...

  In windows 8 screen can be divided into desktop and app half half, it would be very useful if Aurora could be opened in the application, half of the operating system and allow the normal office work to the other half, on a windows desktop 8, I can't see any advantage to use Aurora instead of Firefox, if this is not possible It's a little let down to be honest, I thought that Aurora was an excellent and practical idea.

  Is there a way for this app windows 8 be opened as an app, or is it limited to the desktop?

  Thank you for your help

  Hello spangled101, just to clarify: aurora is a code name for the beta version of firefox hwere novelties are tested. the version that is aurora today will be available as firefox in a few months.

  But back to the real question: Please refer to this article How do I bring up the aurora metro windows mode: how I run Firefox for Windows 8 Touch?

• Document from Windows Media Player AND MS Windows open on the same screen

  Hello.

  I'm doing a very long media (recorded voice) transcript of court recorded on Windows Media Player in a document typed on MS Word (using Windows XP).

  I would like to know if it is possible to have Windows Media Player and my document strikes MS Word open on the SAME screen.  I am currently switch between two programs using my bottom toolbar.  It is extremely time consuming and not very well.  Ideally, I would like to open my Windows Media Player, in a small screen on the right upper side of my MS Word document.  This would allow me to work out of the same screen without having to click will result in my bottom toolbar to switch between these programs.  I'm sure that I explained properly :-).  ANY help, suggestions and advice will be highly appreciated.

  Kind regards

  AJS

  You should be able to do it by opening the two programs, then right click on the taskbar and selecting "Tile Windows vertically".  Just make sure that they are only two open programs.

  This screenshot shows WMP and WordPad, because I do not have Word installed, but it should work exactly the same thing:

  

• while sleeping, the computer is locked and cannot be opened by the administrator

  Help. I have an old computer second, forwarded by a friend that I have more contact with. This computer is used daily by another friend who doesn't have a computer.

  every night the computer go to sleep and the next day when he woke up that my bud Gets a message that it is locked and only the admin can open it.

  I changed it to the administrator, but when the screen opens and he tries to enter the password, the screen seems FROZEN and don't let him enter his password.

  . the only way to work around this problem seems to be to restart. as the machine is old, reboot may take 10 minutes or more. What can be done to avoid this mess?

  Oddly it only happened in the last 2 weeks... for almost a year that wasn't a problem...

  concise simple tips are appreciated.

  Steve

  Hello

  See if that helps you.

  The second part is on XP and standby / sleep of password.

  http://www.mydigitallife.info/disable-Windows-XP-and-Vista-from-asking-for-password-to-unlock-on-wake-up-resume-from-sleepstandby/

  And there is an option of password screensaver in XP, too;

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_assign_screensaver_password.mspx?mfr=true

  Doing this is reverse:

  http://www.computerhope.com/issues/ch000790.htm

  See you soon.

• Folder opens in the search window and not file. left click and it opens in search right click then 'open' and it will open in the window of the folder. How can I open it directly with by clicking on the left button of the mouse

  I've created the new folder. When I left click it open in the search window.  If I right click on it, drop-down box and select open and it opens on the window of the folder as it should.  How can I get the folder to open in the right window when I left click rather than having to do the extra step by clicking on the right, and then open?

  Try this link:

  'Search Companion starts if you double-click a folder '.
    <>http://support.Microsoft.com/kb/321186 >

  HTH,
  JW

• Possible Crypto overlap and NAT ACL open to the vs host subnet

  Hello

  For a PIX 515E 6.3 (5)

  I have the following ACL:

  List of crypto ACL

  ipsectraffic list of allowed access host ip 192.168.7.221 object-group pdvcorp-backup3-to-db1-datacenter
  ipsectraffic list of allowed access host ip 192.168.7.222 object-group pdvcorp-backup3-to-db1-datacenter
  permit ipsectraffic of the object-group corphosts-datacenter 192.168.10.0 ip access list 255.255.255.0
  ipsectraffic permit access list ip object-group Productionhosts - data center object-group access-productionhosts-data center

  In the list above Crypto ACL list, hosts, 192.168.7.221 and 192.168.7.222 are both also part of the group 'productionhosts-datacenter"referenced in the same object list ACL. What are the consequences of having the same hosts referenced in the Crypto ACL, if any?

  No NAT access list

  IP 192.168.7.0 allow Access-list sheep 255.255.255.0 192.168.10.0 255.255.255.0

  In regards to the Crypto ACL above, is there a (security wise or another) problem with the opening of the entire subnet with an ACL sheep to save on the duty to nail each host.

  Thank you

  Dan

  It's okay, you can use the same source to multiple destinations.  No issues with the sheep.

• Slow opening Excel file with MACRO and links from network on the Desktop view file server compare to physical PC

  Hi guys,.

  It's a weird thing.

  I just encountered a very strange problem when you open one of the excel files located on a Linux Samba Shared running file server.

  My laptop physics has a Dual Core 2 Duo 2.27 GHz, 4 GB of RAM and Windows 7 Pro 32-bit.

  My Desktop view has 2 vCPU (UC from host to 2.99 GHz/Core with base 16), 4 GB of RAM and Windows 7 Enterprise 64-bit.

  Note: The Desktop view is located on the FusionIO card locally on the server, so it is lightning fast.

  When I open excel file from my physical office, need you 3 seconds to open and 5 seconds to enable the content (because it is a big xls file with a bunch of MACRO and LINKS to a different worksheet)

  When I opened that same excel view Desktop file, it takes you 18 seconds to open and 1 minute to activate the content.

  Anyone happened to have the same problem with their environment to experience?

  Do you mind sharing some tips to solve this?

  Finally, be able to locate the problem.

  It was Sophos EndPoint AV for vShield that I deployed for assessment.

  Once I turned off politics, everything is back to normal.

  Couldn't believe that via vShield endpoint was causing all this because I tried Symantec and BitDefender for vShield before and no problem at all.

  Well.

  I hope that Sophos or VMware vShield team has a solution for me.

  Nice day!

• do not download itunes open said the itunes library file cannot be read because it was created by a newer version of itunes

  The iTuneslibrary.itl file cannot be read because it was created by a newer version of iTunes

  Hello

  This error prevents the launch of iTunes. The library file has been modified to work with the new version of iTunes, so it is no longer compatible with the previous version. The good news, however, is that Apple save the iTunes library file in a subdirectory that allows you to revert to the previous version.

  
  Method 1:
  You can try the steps to recover a previous version of the iTunes Library.itl file.
  a. open your folder My Documents\My Music\ (Itunes).
  b. we backup the current version first. Rename iTunes Library.itl as iTunes Library.itl.bak to something.
  c. go to the My Documents\My Music\Previous of iTunes libraries folder.
  d. you can see several files that start with the iTunes library and have a date included in the name. Copy the new file into the folder.
  f. return to the my documents\Ma music and paste the file in the previous step. (The folder in step 1)
  g. rename the new file copied to iTunes Library.itl.
  Your library should now be restored to the previous version of iTunes, and the problem is solved,
  
  Method 2:
  If the problem persists then you can also uninstall and reinstall iTunes and check if it helps:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923