Broken index in video avi files need permanent repairs.

Similar Questions

• Video error - files needed to display video are not installed or not working not properly. Please restart Windows Media Center or restart the computer

  I have Vista Version 6.0.6002.18030 (vistasp2_gdr.090429 - 2357) SP2 installed during an automatic update.  This box is only used as a Media Center

  Now, I get this error when you try to watch HD programming - I get a few seconds of viewing before the image starts to freeze, the acoustic breaks then the error message.
  Recorded at stations SD I will often get towards the end of the program, and it starts too break up.
  The Analysis ToolPak that I found for the Hauppauge 500 t tuner I have reports that all networks have 70 + strength and 100% quality.
  The performance of the Task Manager tab indicates the processor cores ares works at about 25% of capacity
  I had a lot of trouble getting the Pioneer BD drive to work - it turned out to be a very minor mistake, a slider maxed out on the Graphics tab "overlay" card - but until I found this he encouraged to re - install the OS from the original DVD and the problem persists.
  The system used to work properly and there has been no hardware apart from the Pioneer BD drive changes.
  I got ffdshow installed from the beginning, so I don't think that's the problem.

  DVD read OK

  BluRay disks play back ok using the Cyberlink plug in BOF VMC

  Different types of downloaded files play OK using VLC.  So, I conclude that the (integrated) graphics (latest drivers installed) and in the rest of the material are very good.

  Looking through the forums, this seems to be an old problem, but its very curent FRO me and SUPER frustrating.

  The indices of anyone?

  Hello Clement,

  Thanks much for the reply.
  I had already downloaded the Tuner card driver on the site yesterday and installed (this is the same version I already had, but he did not seem wrong to re - install).  No change.
  I really don't understand well enough codecs!  -are you making allusion to the East no doubt not that the encoding of the input signal software cannot do its job properly?  Are the part of the tuner driver codecs? I could not see them on the website of the tuner (http://www.newmagic.com.au/Support/Hauppauge_Vista_Drivers.html)
  Can you please point me in the right direction for the codec pack (btw, I though 'codec packs' were notoriously bad news! and since I recently made a new facility would be not all right codecs be there that they must have been before when everything worked well?)
  I have a chart integrated 'card' on the ASUS P5E - VM HDMI, an Intel GMA x 3500 and here too I have the latest driver from the Intel web site.
  I think I've found the "MS decoder checkup" utility you mention (http://www.microsoft.com/downloads/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D-627E6ADE9FCB&displaylang=en).  I have a Red Cross and green ticks for different decoders but 'Microsoft MPEG-2 Video' (msmpeg2vdec.dll.) decoder is compatible with MCE, but not with MP10.  When selected "update now" button is dimmed.
  Thanks again

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WMC on Xbox 360 shows "video error: the files needed to display video are not installed...»

  Front when you use Windows 7 Xbox 360 everything has worked well.
  Upgrade to windows 8.  WMC can play programs recorded on PC, but when I try to play recorded shows with WMC of XBox 360, I get the following message

  "Video error: files needed to display video are not installed or not working not properly." "Please restart Media Center and or restart the computer.

  I don't have any codecs installed
  I tried regedit change suggested that for vista, does not work
  I tried the deactivation/activation of WMC on the PC, does not work
  Restart the PC does not work
  Restarting everything doesn't work

  had this error the other day, that it drove me crazy. You know what fixed it? Disable my firewall. For some reason, he decided to start blocking my xbox. I hope this helps.

• Update KB975560 AVI file viewing breaks

  After installing KB975560, clippings video AVI which were extracted from a larger video AVI file failed to load. As soon as I remove this patch of his work.

  We need this to be fixed to continue a very critical research initiative at a University Hospital. If this problem is not resolved it will negatively affect our research.

  Help, please.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• AVI files created with only fraps capture movie online no thumbnail view

  have vista prem all the service packs and years until ago never had a problem same true old avi files allways showed thumbnail view but after reinstalling windows this year something strange media player 11 customer would play my videos but keep playing in the back ground even after clicking this box at top right to dismiss the media player that has not closed it was going on for a long time It was the first problem more no thumb nails now I have realplayer to play both music / divx player videos just to play the types of test files a few times Flash flash mp4 don't thumbs realplayer videos flash show the thumbnails, but not flash mp4 videos I have a flash drive, he plays as much as I want to pull up and watch isn't a problem here.  other players in support of windows vista movie maker Centre Photo Gallery of nero player photo viewer 7 do not use it a lot just love mp4 videos when fire videos on disc, I noticed last time I did a sort of what mite be wrong with my system on the nail of the thumb and videos avi file in windows Explorer with who can have an intelligence to share... will add this note a few videos due AVI see the thumb nail view... just not my those more returned to the folder as in player media of record fraps I added this file, he showed the thumbs nails it ok for the of works very well...

  have vista prem all the service packs and years until ago never had a problem even true old avi files allways showed overview thumbnail but after reinstalling windows this year something strange customer of media player 9 would play my videos but keep playing in the back ground even after clicking this box at top right to dismiss the media player that has not closed it was going on for a long time It was the first problem more no thumb nails now I have realplayer to play both music / divx player videos just to play the types of test files a few times Flash flash mp4 don't thumbs realplayer videos flash show the thumbnails, but not flash mp4 videos I have a flash drive, he plays as much as I want to pull up and watch isn't a problem here.  other players in support of windows vista movie maker Centre Photo Gallery of nero player photo viewer 7 do not use it a lot just love mp4 videos when fire videos on disc, I noticed last time I did a sort of what mite be wrong with my system on the nail of the thumb and videos avi file in windows Explorer with who can have to share intelligence...

  ==============================================================
  The following article might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  If you want to display the content of the downloadable
  regfixes... just save to your desktop, unzip (or simply drag
  the file on the zip file and drop it on your desktop)
  and open with Notepad.

• How to convert video files in avi files 3pg need a kind of codecs etc.

  I am trying to transfer my video files 3pg by converting avi files to copy on this new player mp3; in the instruction book, which says that if there is no problem converting them, iwould need to download additional codecs to take in charge all the multimedia files. How do you do that?

  Hello

  What operating system is installed on the computer?

  You don't need codecs for the avi files to convert to be played on the player, if you need to read the files on the computer, then you may need to download codecs from the internet.

  You can use your favorite search engine to download codecs and use.

  The audio or video file can be converted to a file type that your device can play and then copied to your device. If it cannot be converted (or you don't want it to be converted), you can always choose to copy the file on the device, but you will not be able to play.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/copy-videos-pictures-and-music-to-a-portable-device

  Let us know if it helps!

• I have an avi file embedded in a Web site created with Frontpage 2003, which plays in IE9, but Firefox displays an icon broken instead of playing the video.

  I am creating a web page presenting different slideshows for all photographic categories. I did a little 'Birds' video avi and incorporated in the URL below (http://mysite.mweb.co.za/residents/dobbino/Photographic%20Slide%20Shows.htm). The video if I loaded the page in IE9, but Firefox 8 all that shows is an icon in the upper left corner.

  Thanks for the comments. As mentioned above, I overcame the problem by using a flash video, and as he has other benefits (size) that will be used in the future. Thus closes the query.

• How to combine video and audio in avi file

  I acquire my 1394 camera video image and acquire sound of my computer microphone, which is good and done separately.

  But I need to combine these two files (audio-> wav, video-> avi) in a single avi file in the run-time, which I play the avi file with the sound with other players, like: windows media player.

  Could someone give me some hint please? I asked the support of NEITHER, but they cannot give me a good solution.

  I found some companies sold the plugin, but I think that this is not my option.

  Try this place.  Download (direct link) was working when I checked.

• I have windows xp professional I can't play file video avi in windows media Player

  Hi dear, I can't read the file video avi in windows media player

  There is a small chance that the file will play if you rename
  the file and change the extension to .avi to .mpg.

  The following (not free) decoder may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.2 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  No guarantee, but it might be interesting to try to download
  and install 'one' of the following codec packs:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  (1) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (2) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (3) info on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  Good luck...

• Vista will not play the video portion of my avi files

  I have a ton of my Canon camera avi files. Windows Media Player does not display video (Vista or XP), but the sound is very good. I can't play using Real Player on a XP machine. Real Player on Vista will not display the video either.

  I have a ton of my Canon camera avi files. Windows Media Player does not display video (Vista or XP), but the sound is very good. I can't play using Real Player on a XP machine. Real Player on Vista will not display the video either.

  ==================================
  No guarantee... but it may be worth trying to download
  and install the following free codec pack:

  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  * Proceed at your own risk *.

  Info on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to export my animation as a .avi file while keeping a video and audio quality?

  Good so I just got this program and I did a small 7 second animation. I want to export to see how it will look, but I don't know what is happening. I currently have Windows 10 and that you want to export to a .avi file so I can import it into a video editing software to use as an intro to my YouTube videos. How can I get it in a single .avi file and make it accessible through the media player from Windows?

  I think that export AVI disappeared earlier. You can export a perfect quality QuickTime, but on Windows, which means you need to install QuickTime. You must do this, then you can download MOV file, you get directly on YouTube.

• MXF video to .avi file problem

  Using Premiere Pro CS6 with Matrox MXO2 mini box and shooting with the Panasonic P2 card manufacturing. MXF file, I'll have a problelm when I put them in a file, .mxf to climb and then export as a .avi file.

  The computer on which the work is performed on plays back audio and video of the .avi into the Player Windows Media.

  However, when I play the same .avi file on another computer Windows using Windows Media Player, it plays the audio fine but no video, we see that a memo cleaf.

  When I export to .avi .mxf files first watch the avi for MATROX MPEG - 2 I - Frame HD codec.

  I can only assume this isn't the codec Windows looking for so now I you ask, what codec should I use to allow the export of avi to be played by Windows Media Player?

  When I export to a .wmv .mxf files all is well in all areas.

  Please help, much work is need to be completed.

  Thank you!

  I still think you're goals need adjustment. Instead of AVI and WMV, just give them a MP4 file.  That's what you get using the H.264 presets.

• AVI files - no video, only sound problem

  Hello!

  I'm affected by some very strange and _very_ annoying problems with my Adobe Premiere Pro CS5 software - my. AVI files have no video.

  I recorded a lot of video for a remake of the video on my camera: Toshiba Camileo X 100 HD (720p60frames).

  I the play well in Windows Media Player and VLC Media Player and others, but when I import into first, I get only audio - video NO.

  I've been searching around the Internet for a solution - but found - it really gets on my nerve as I look forward to edit my video .

  The solution that would work, was Super (a conversion program) to download and convert my AVI files into MP4, h.264/AVC with AAC LC codec, but it will take years, and I'm also having difficulties in finding good quality video as the original file - ergo, I don't want to lose quality when converting. Convert all my files will take years - got about 10 GB - and I only see this as an emergency solution.

  I bet that there MUST be a fix for this, and my AVI files may work correctly for Adobe CS5 first. I need help - please help!

  Thanks in advance!

  p.s. I'll just say that I work with files before AVI, another project, but these cases recorded with FRAPS on my computer.

  There must be another solution!

  There are; transcoding is a waste of time, space and quality:

  1. Download and install VLC.
  2. In the folder containing your AVI files, create a new text document, called "avi2mp4.bat" (without the quotes). Be sure he has the. BAT extension. you need to remove the. TXT extension, which is added by default.
  3. Paste the following text in the command file, and then save it:

     @ECHO OFF
     for %%a in (*.avi) do "C:\Program Files (x86)\VideoLAN\VLC\vlc" -I dummy "%%a" --sout=#:file{dst="%%~na".mp4} vlc://quit
     
     

  4. To run the package, simply double-click, or you can drag and drop the AVI files on it, and they will be repackaged as MP4s with the same name as the original. If you use the approach drag / move, you can save this file anywhere on your hard drive, and all the files dropped on it will be converted and placed in the same folder as the original.

  That's all. The MP4s properly is important in the first, and you will no transcoding.