Browser Web still tells me to upgrade after that I installed the latest version

Similar Questions

• After you have installed the latest version of Kaspersky Anti-virus, I no longer wish to receive email.

  I can send emails, but I can't get everything and they do not get copied to my "sent" folder.
  I have two accounts (using the same installation of Thunderbird and the same IMAP server) and both have the same problem.
  Thunderbird is more sought my for my passwords and after a while I get a message that says only that the connection has expired.
  Before the connection times out, the text that appears on the bottom bar said current mail server features.
  On another thread, someone suggested you connecting to customer account Web screw and remove the message oldest undownloaded Inbox because it might be a problem with the e-mail address that blocks Thunderbird, but all my emails undownloaded were received after that the problem began to occur.

  I recently installed the latest version of Kaspersky Anti-Virus, so I suspect that it blocks the incoming connection. I tried to re - install Thunderbird to see if she could circumvent Kasperky or tell me what I need to do so that he could make an exception (or something like that). No luck.

  Kaspersky support services do not seem to be worth anything, so I don't think I'll get any assistance to their end.

  Any help here would be greatly appreciated,

  Simon

  I don't know how the traffic server scan works, but I don't know what heuristic analysis is. This is the review of the code and dumping something containing code that is normally used to the virus.

• After you have installed the latest version, only a quarter of the page is visible in the window. How do I shrink to fit?

  I can use the view menu at the top and "Zoom Out" 4 to 5 times to be able to see the entire page, but when I go to another site or page it is up to a size that is too large to be displayed in the window. This is unacceptable and I need a solution or I have to use another browser.

  Hello, firefox 22 is now about the density of pixels you have upgraded to system in Control Panel > appearance > display. more information about this is available at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller

  If you want to set the text size/pixel density in firefox is different that your system settings as it has been addressed in previous versions, enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that suits your needs; -1.0 is the default and will respect the parameters of the system).

• my 2nd generation ipad 2 has got bricks after that I installed the latest IOS 9.3.2; Unit worked perfectly before installation. taken at the apple store and they said it was notjing that they can do.

  Apple will come out with a fix for iPads in brick by the last download of IOS. My iPad has worked perfectly before the download; now its useless!

  This is similar to bring me my car service - then he saw die and they said sorry - dealer cannot help you!

  I was a loyal customer of Apple since my 2nd Apple, through 4 mac and even a Lisa; Apple will not solve the problem or offers something in return for the loss and inconvenience for their product caused a problem (and knew that they was a question and kept pushing users to be updated)!

  FAKE!

  As you know there are some problems identified with the 9.3.2 update and iPads - we are waiting for a solution from Apple

  It is a community of users to tech - Apple isn't officially here

• After you have installed the latest version of Mozilla, my Roboform toolbar is no longer available

  I have the latest version of Mozilla and the latest version of Roboform. RoboForm works fine in my Internet Explorer, but will not display the Roboform toolbar in Mozilla. I tried to uninstall Roboform via Control Panel and reinstall... same question. Please helpl

  You use the beta version of Firefox, which Roboform is not entirely consistent. You can switch to the final version of Firefox, which should support the Roboform. Download from www.getfirefox.com

• After you have installed the latest version of iTunes, get the error message about AVFoundationCF.dll at startup to the top

  I've been downloding the new version of itunes and my computer froze and I stopped him by holding button turn off and when I go on the computer the next time he says this "C:\Program Files\Apple\Apple Support\AVFoundationCF.dll of the application also does not Tun on Windowns or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  * original title - help me please: (*)

  Hello

  ·                         Follow the information from apple to the link below

  read this information on avfoundationcf.dll

  http://discussions.Apple.com/message.jspa?MessageID=12932050#12932050

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  and also try itunes discussions

  http://discussions.Apple.com/category.jspa?categoryID=149

• Error: "Win32 dll' after that I installed the latest driver from nvidia.

  My specs:

  -Windows Vista Edition Home Premium 64-bit

  -4 GB of ram

  -Core 2 Duo E8400

  -Geforce 260GTX

  I installed and activated my Windows Vista with service pack 2. I downloaded and installed all the latest drivers of my motherboard website.

  Problem: I downloaded the latest driver for my graphics card nvidia and once that I reboot my windows displays the error message saying "win32 dll" does not work and my background task bar is full of this message. Also, my pc is very slow. I somehow get to "system restore point" restore back to another restore point.

  Once my pc over to restore to a different point, my pc works fine. So I installed an old version of my graphics driver and it worked fine. Restart and distillers works very well.

  Question; What is the problem with my pc? What is my graphic card, driver, something that I didn't do, and how can I solve the problem?

  Thank you for your help

  Hi tsunomi.

  Have you had a chance to do a startup repair?

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to restore the last session after installing the latest version of Firefox + auto install

  I still need help on the following points:

  After you have installed the latest version of Firefox "restore previous Session ' is always grayed out, how to make this work?
  I don't understand the solution on this site. I'm a basic user and never used another thing but windows.

  How to avoid auto installation of Thunderbird and Firefox versions updates? Thunderbird installed the latest version, when I clicked "On Thunderbird" to check the latest version. I had no choice, it just started installation.

  Well, I think that this is a problem when you lose history that you couldn't lose. But I hope that it was only once.

• Adobe story online is not loading. I just get the loading bar going on for hours. I restarted my browser, deleted my cookies, installed the latest version of Flash and still no loading.

  Adobe story online is not loading. I just get the loading bar going on for hours. I restarted my browser, deleted my cookies, installed the latest version of Flash and still no loading.

  For security reasons, browsers tend to block flash on a site content if the system does not have the latest version of flash player.

  Try to get the last being here: https://get.adobe.com/flashplayer

• Propeller: Graphics distorted in Windows applications after you install the latest version of the graphics driver (3643)

  After downloading and installing the latest graphics driver for lenovo support pages (10.18.10.3643) I noticed that some graphics in Windows applications are distorted. Generally, it looks like a refresh or memory problem. If you start the application that everything is OK and after using it awhile (or switch to another app and back)

  For example, Onenote radial menu looks like this:

  

  Where is should look like this:

  

  Over time, it could get worse, as the entire application has problems how to freshen up, or this menu does not lose only icons, but also the colors, etc..

  I tried to reduce the demand for resources by disabled anti-aliassing, but it does not help.

  Normal windows applications do not have the problem and friendly resource (for example not chart orieted apps) takes more time to show the same behavior.

  It is 'just' a bug in the driver, or y at - it shape a setting I have to solve this problem?

  Thank you

  Ruud

  the version that the system put in place after unistalling the last display dirver is:

  Version: 9.17.10.3190

  Dirver date = 20/06/2013

  = Intel driver provider

• This page requires a version more recent Silverlight.Would you want to install the latest version from the Silverlight Web site?

  ---------------------------
  Microsoft Silverlight Update
  ---------------------------
  This page requires a newer version of Silverlight. You want to install the latest version from the Silverlight Web site?
  ---------------------------
  Yes No
  ---------------------------

  using Visual Studio RC 2012 and try to create a Silverlight application and the following error message occurs.

  ---------------------------
  Microsoft Visual Studio
  ---------------------------
  Mixture cannot continue because a compatible version of Silverlight is not found.
  ---------------------------
  Ok
  ---------------------------

  Silverlight forums: http://forums.silverlight.net/

  Visual Studio forums: http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio

  -steve

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0 x 80042302 on the restoration of the system after installing the latest version of Norton 360.

  Original title: 0 x 80042302 on the system restore, no service.msc found - what's the latest

  Looked through all positions and they seem to be quite old. someone out there please help, my husband drives me crazy with his laptop, he is unable to do a system restore and still get the above error message.

  All this began when we installed the latest version of Norton 360 and it was unable to access his hotmail, returns constantly with page not available, while on my computer, I can access everything. It's an Acer and mine is a Dell.
  Any ideas what to do
  Thanks in advance

  Hello

  Thank you for the update.

  Good to know that you are able to resolve the issue and thank you for sharing the information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Why can I still not load the pdf files even after I installed the latest version or reader?

  I received an email, and I'm trying to simply open pdf files to view.  I went through the steps in the installation program Adobe Reader, I typed in my password of the computer and was taken to a page that says "Step 3 of 3", and he wanted me to buy another Adobe app.  So I Quit Safari, leave my email.  Tried to restart my email and then even tried to save the pdf file and then tried to open it to see and I got this message:

  To view all of the content of this document, you need a later version of the PDF Viewer. You can upgrade to the latest version of Adobe Reader www.adobe.com/products/acrobat/readstep2.html

  For support, go to www.adobe.com/support/products/acrreader.html

  
  

  I went to the two sites listed and have still found no answer.  I was wondering why I can't view these pdf files?  If someone a tips or advice to help solve the problems, I would be very happy!

  Thank you for your time!

  Lbbhx1
  

  Assuming that you get this message in Safari, Chrome, or FireFox, then Adobe Reader installation is not complete. You could try saving the file and open it on your computer or reinstall the drive. What he was trying to sell you? Be sure to download Adobe, not someone else.

• Plugin Flash will not install even after installing the latest version of Flash

  When I go to a site that contains Flash content, it says "a plugin is required to view this content" and there is a link to install the plugin. In addition, there is a message at the top of the page that says "additional plugins are required to display all the media on this page" with an option to "Install missing Plugins". I click on the link to install the missing plugin, and a dialog box appears that says "the following plugins are available: ' and 'Adobe Flash Player 11.0.1.152' lists with a checkbox next to it. The box is checked, and I click on 'Next' to install. He's going through the motions and then told me that 'no plugins were installed. There is a link to manually install the plugin, which brings me to the Adobe's Flash download page. I unchecked the box for pair McAfee Security download and downloaded the latest version of Flash (to be honest, I downloaded actually this exact version even about 10 times today). The dialog box appears, I save the file and once it has downloaded, open the folder that contains (my downloads folder). I then, close all programs (including Firefox) except for the folder of Windows Explorer I want to run the installer from. I double-click the Flash Installer to perform the installation. The installation process is complete, the installer tells me that the download is successful, and my browser opens upward with a message "Successful Installation" from the Adobe Web site. Yay! My installation is successful... Orrrrrr not. Return to the page with the Flash media - always have a message saying that I need the plugin. Try to download plugin once again... no dice.

  THEN, I go to "Manage my Add-ons" thinking maybe I need to activate the plugin. There is no plugin Flash (or Shockwave) listed on any of the menus - it is as if it does not exist.

  I downloaded the latest version of Java because I read somewhere that Flash requires Java work; I installed the "add-on Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, best I can tell.

  I also went to the Adobe homepage where you can see what version of Flash you use (http://www.adobe.com/software/flash/about/) and it does not even show that I have installed Flash. In Internet Explorer, it shows that I have installed Flash, but it's the previous version (but this is probably due to the fact that I downloaded Flash in Mozilla, not IE, and they use different modes in each browser - so an update that you download from a browser does not necessarily apply to the other browser).

  So in summary: I don't know what on Earth is wrong here, but I'm about as frustrated that I've never been in my life. I don't know why the installation of Adobe Flash is said she is successful (it sleeps for me?), but there is no plugin appear in my menu manage add-ons, and I googled all the possible combinations of content in this message and have not found a solution that works yet.

  It seems that you have found the 64-bit version of Flash. Is your Windows 7 64-bit?

  I did read your entire post, but NPSWF64_11_1_102.dll which is Flash 64-bit; This turns into a novel when it should have been a short story.

  First, uninstall all Flash your system by following these instructions from Adobe

  • http://kb2.Adobe.com/CPS/141/tn_14157.html

  Second, get the 32-bit versions of the following. Why? Unless you use an unofficial Firefox 64-bit version, the regular Firefox is a 32-bit browser and needs 32-bit Flash.

  • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_Install_in_a_firewall_proxy_server_environment
    • Download/SAVE two ways, close all browsers and then install.
      • 32-bit Flash Player ActiveX (Internet Explorer)
      • 32-bit Flash Player plugin (all other browsers)

  Third, test Flash on websites where you had a problem before.

  If this does not work, my last suggestion for you is to follow the instructions from Adobe for troubleshooting. I don't know what's happening with your system, which could possibly be the cause of the problem.

  • Troubleshooting Adobe: http://kb2.adobe.com/cps/191/tn_19166.html

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.