Error: "Win32 dll' after that I installed the latest driver from nvidia.

Similar Questions

• Can not install the latest driver from NVIDIA on my Satellite A100 - 999 (PSAARE)

  Hello

  I have a problem with the nvidia geforce go 7300 card controllers in my laptop, there is an update of the website of toshiba for this laptop and version 156.16, one coming from him makes it so that is 97,46

  When you install the new controller, this leaves me the following message: the program from nvidia cannot locate any controller compatible with current hardware.

  Not you if it's better to remove the old controller to accept it or the problem is due to something else.

  Can someone help me

  Thank you

  Post edited by: [email protected]_ES

  Hello

  Did you remove the old driver first? Try to manually remove and install a new one after the reboot.

• Browser Web still tells me to upgrade after that I installed the latest version

  Whenever I install an update of Firefox, homepage keeps telling me to upgrade to a newer version, because he thinks that I am still using an outdated version. This happens with other sites that support is more than earlier versions, even if I'm day - they are simply not recognized.

  For example, YouTube continues to display this message at the top of the page asking me to upgrade my browser, even if it's the latest version. All this happens with sites requiring Flash Player, thinking that I use an outdated version of this, too, even if I'm not.

  How can I get the browser to recognize that I use the latest version?

  You need to reset your user agent string (identifies the version of Firefox). Yours is "Mozilla/5.0 (Windows;" U; Windows NT 6.0; en-US; RV:1.9.2.13) Gecko/20101203 Firefox/2.0.0.14; MEGAUPLOAD 1.0 ", it has been modified by the addition of megaupload and is stuck on Firefox 2.0.0.14. For more information on how to reset the user agent string so that it shows the correct version of Firefox, see https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

• Wi - Fi Elitepad 900 died after you have installed the latest driver Atheros HP.

  The Wi - Fi on my 900 Elitepad (Win 8, 32-bit) works well in the past.  But recently, I am constantly Wi - Fi 'limited connection' and that 'no connection' emits intermittently.

  And I went to the download page of the HP driver, installed the last "Qualcomm AR6000 Driver Atheros Wireless LSN series" (SP61232, ver.3.7 of March 22).  After installation, the Wi - Fi connection goes dead.

  In the lower status bar, the Wi - Fi icon is always displayed with a red & white and does mean 'no networks detected'.

  In the section 'wireless devices' menu 'Settings of PC' Win 8, the Wi - Fi button disappeared altogther, even if she was still there before the update of the driver.

  In the "Network connections" window of Win 8, the Wi - Fi icon is displayed as 'active', but a better connection returns the message that "there could be a problem with the driver for the wireless adapter.

  In the "Device Manager", the Qualcomm Atheros AR6004 adapter shows that everything is normal and work, even if it is obviously not.

  For the 'ipconfig/all', the Wi - Fi section does not even appear in the result.

  I've uninstalled and reinstalled the old and new Wi - Fi drivers several times above, but Wi - Fi is still dead.

  Help, please.

  Problem solved!

  I had to uninstall all the drivers Atheros Wi - Fi in the Mode without failure Windows, restart, then CNettoyez in the normal Windows mode, restart, and then finally reinstall the latest driver in Mode Windows safe.

  Now the Wi - Fi is back running.  But I have to check if the Wi - Fi BOUNCING 'limited connection' or 'no connection' not coming back or not, with this latest HP driver.

  It must be one or more of the following applications installed that prevented the WiFi driver install correctly in the first place:

  The AVG antivirus,

  ZoneAlarm firewall,

  CNettoyez,

  Malwarbytes anti-malware.

• Can not install the latest driver from Intel on my Satellite Pro U300-10 display

  Hello

  Intel has recently, a new display driver, which I think is useful to me because it won't let me play games that require:
  Pixel Shader PS1.1
  Vertex Shader VS 1.0
  "Act of war" and others.

  The pilot is the revision of the pilot: 15.12.4.1666, March 5, 2009
  It is supossed to be the latest driver for the video card U300: MOBILE INTEL 965 Express chipset family.

  The problem is that when I try to install, I have an error that says: "not for this system, ask your provider manufacturer.

  How can I install or where I could find the solution?

  I have TOSHIBA Satellite Pro U300-10 with Windows Vista Business 32.
  MOBILE INTEL 965 Express chipset family
  MOBILE INTEL GMA X 3100

  Thank you much in advance.

  DCARL

  Drivers designed for laptops are changed and adapted to provide performance fairly, but not to force a graphics card to run on the limit. As you probably know there are big difference between office and mobile graphics cards.

  Desktop graphics cards have no limits with cooling and drivers can be updated very often. Design of portable computers is completely different and all hardware components are placed on the square. The common problem with laptops is to design the system of cooling, small but effective.
  Because of all these reasons, display drivers must be tested and adapted by the laptop manufacturers. The main point is to protect the material. The same situation is with other manufacturers of graphics card. They don't offer drivers for laptops.

  If your graphics card will blow that will be responsible for this Toshiba or Intel?

  By the way: Satellite Pro U300 is for me a laptop of small business and certainly not designed for games. Do you agree with me?

• Why do I get a message "driver conflict detected" after you have installed the latest driver.

  I got the impression ink levels display problems.  So, I decided to run the latest software to print and Scan doctor.  Of course, diagnostic tests detected a driver problem and displays a message "Driver conflict detected.  So, following the instructions, the driver has been uninstalled and new software has been installed by using the latest version of the driver full and another software installation.  After this has been done, diagnostic tests was performed again, guess what, same message.  The next timeI just installed the driver installation package.  The diagnosis was made again.  Guess what, same error.  Well, after a few hours trying to find another driver for a 64-bit computer to Windows 7 and looking for an uninstall program different, I gave up.  Oh, the other problem is repeated 'offline' messages on my wife, WIFI connection to the printer. No problem has been fixed.   Does anyone have a solution?

  Thank you-

  That solved the problem for the USB connected computer. The wireless computer works correctly.

  Thank you very much for the help.

• my 2nd generation ipad 2 has got bricks after that I installed the latest IOS 9.3.2; Unit worked perfectly before installation. taken at the apple store and they said it was notjing that they can do.

  Apple will come out with a fix for iPads in brick by the last download of IOS. My iPad has worked perfectly before the download; now its useless!

  This is similar to bring me my car service - then he saw die and they said sorry - dealer cannot help you!

  I was a loyal customer of Apple since my 2nd Apple, through 4 mac and even a Lisa; Apple will not solve the problem or offers something in return for the loss and inconvenience for their product caused a problem (and knew that they was a question and kept pushing users to be updated)!

  FAKE!

  As you know there are some problems identified with the 9.3.2 update and iPads - we are waiting for a solution from Apple

  It is a community of users to tech - Apple isn't officially here

• Impossible to install the latest driver Intel Display

  I am trying to install the latest driver from Intel HD graphics card, but I always get the message that my system does not meet the minimum requirements...

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS032433#systems

  I have a T430s.

  Here's a screenshot of my dxdiag:

  

  
  

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

  I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
  I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

  Hello

  You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

  Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
  Sat Pro L10
  Satellite L10
  Satellite A50 and A80 (6.14.10.3943)

  Good bye

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• This page requires a version more recent Silverlight.Would you want to install the latest version from the Silverlight Web site?

  ---------------------------
  Microsoft Silverlight Update
  ---------------------------
  This page requires a newer version of Silverlight. You want to install the latest version from the Silverlight Web site?
  ---------------------------
  Yes No
  ---------------------------

  using Visual Studio RC 2012 and try to create a Silverlight application and the following error message occurs.

  ---------------------------
  Microsoft Visual Studio
  ---------------------------
  Mixture cannot continue because a compatible version of Silverlight is not found.
  ---------------------------
  Ok
  ---------------------------

  Silverlight forums: http://forums.silverlight.net/

  Visual Studio forums: http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio

  -steve

• problems to install the latest plugin from vcenter server 5.0.0.149 on the vco 4.1.1 build 733.

  I have problems to install the latest plugin from vcenter server 5.0.0.149 on the generation of vco 4.1.1 733.

  If I go to the plugins tab I see vCenter Server 5.0.0.149 Installation OK

  I configured a host esx to vCenter Server tab, but as soon as I click on 'Apply' it starts to load forever.

  I tried to restart the server vco and vco configuration services, but the problem remains unchanged. In the server.log I couldn't find anything relevant, but it is still attatched

  Hello!

  Try increasing the memory for the configurator web-tool, as described in the release notes:

  http://www.VMware.com/support/Orchestrator/doc/vCenter-server-plugin-50-release-notes.html

  See you soon,.

  Joerg

• After you have installed the latest updates of windows for Office 2007, I am unable to open any of my Office programs. I am running XP Pro SP3.

  I deleted the update that caused the problem; specifically, 972581. tried to run repair on the programs; Looks like a reinstallation does not work.
  Office 2003 is not affected.

  Try a direct download of 2 of them and read on the 3rd. http://www.Microsoft.com/downloads/details.aspx?FamilyId=d20004c5-dd01-459e-8120-5f127e20c085&displaylang=en

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=EC802723-F2B2-400A-A24D-8D8D9092F9EA&displaylang=en

  Update of security for Microsoft Office System 2007 (KB974234)

  http://support.Microsoft.com/kb/972581

  Info on KB972581

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this if your error Code 646, including all positions and solutions offer to this thread link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under .

  2. in the list record under , click all files .

  3. in the file name box, type register.bat .

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator . Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue .

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Please rate me upward if you find my post helpful. Thank you!

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.