BSOD and messages after closing.

Similar Questions

• Get the following message after closing or printing a document: the Organizer database is damaged and will be rest next time Acrobat is launched.

  Get the following message after closing or printing a document: the Organizer database is damaged and will be rest next time Acrobat is launched.

  Hi kathleenm92885635,

  Please check the solution in this doc. KB: http://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html

  Let me know how it goes.

  Kind regards
  Nicos

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• 810-160 Phoenix envy: envy phoenix 810-160: try to install Win10 after BSOD and format; drivers not found

  A few weeks ago, I got the BSOD and could only reformat without saving. After a data recovery service ravaged my hard drive, I bought a new drive. My recovery disk is not found (my guess is the woman she pitched in one of his fits of cleaning). Of course, I have to re - install the operating system and bought Win10 home.

  I plugged the USB and started the installation, but now get a message that no driver device were found. It is a pain, but it makes sense. Went to the website of HP drivers on your laptop and downloaded all the drivers, it produces for my specific model.

  Where I'm stuck:

  I have a pop up that says "Windows Setup" and "Select the driver to install", with a window not populated. I plugged my USB key containing the drivers and found him - USB key (H.) I chose this drive and the folder where I placed the drivers. Click OK and I get the message "no device driver has been found. Make sure that the installation media contains the correct drivers, and then click OK. »

  If I have the drivers provided by HP and they are not recognized, how do I proceed?

  Hello:

  Make sure that you dΘmarrez from a USB 2 port.

  You will not be able to install Windows from a port USB3.

  If you have the W10 installation media in a USB 2 port, windows can you are looking for the sata controller driver, so see if it works...

  Download the drivers from this link below (first or second listed file - 1 file listed (64-bit).

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation media W10 plugged into the machine, boot from the W10 installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, W10 will install.

• T410 - reader of fingerprints and TouchPad failure after closing lid

  Hello world
  I have a ThinkPad T410 Intel Core i7 M620 2.67 GHz, 250 GB HDD, 4 GB of RAM, NVIDIA 3100, Windows 7

  There are two problems with it:
  Number 1: After waking up from sleep mode the fingerprint reader does not work. Type of manual password is required.
  , 2nd edition: At a random time the TouchPad would stop working.

  Question No. 1 is extremely annoying. That happen every time, but often enough to be very bored.
  There are different scenarios that I can describe:
  Scenario 1:     Closing the lid makes the laptop to go to sleep. Opening the lid makes the laptop turn on the screen, but there is a login prompt. At this point the reader to Finerprint is not active more and manual entry of the password is required.

  Scenario 2:     Closing the lid makes the laptop to go to sleep. Opening the cover does nothing. The Green LED on the fingerprint reader is on. Slide the fingerprint reader turns on the laptop. Login screen is displayed and manual password entry is required. Fingerprint reader is not available at this stage.
  Scenario 3: by pressing function + sleep makes the laptop to go to sleep. The Green LED on the fingerprint reader is on. Slide the fingerprint reader turns on the laptop. Login screen is displayed and manual password entry is required. Fingerprint reader is not available at this stage.

  After each scenario I would like to connect manually, and the Fingerprint reader does not work with Password Vault, giving a message that it is not present in the system. After waiting for a while (maybe 15 minutes), the fingerprint reader starts working again.

  At the same time, I had a problem with the TouchPad will not work at a random time.
  He would just stop working from time to time and not work until a reboot of the system.

  I used my super cool NextDay on site warranty (I'm so glad I paid the amount extra - the service is great) to have a guy to come and difficulty a faulty speaker. At the same time, he had inspected the problem of fingerprints. He said that the fingerprint reader and Touchpad are connected to the motherboard by a cable and that it is perhaps the origin of the problem. It came the next day to replace the Touchpad and fingerprints of the reader of the cover of laptop part (all the plastic around the keyboard that you put your wrists on). However, it did not replace the cable that connects the two devices to the motherboard (he said that those who are almost never defective)

  After that I have not once experienced the freezing problem Touchpad. (so far... for 4 days now)
  Fingerprint reader problem has not changed at all. It happens with the same frequency as before the repair.

  I got my system to factory state using the recovery media made the 1st day following purchase. It doesn't change anything.

  If anyone else has experienced this problem and has a solution, please let me know.
  Referring to another forum or topic is also welcome. If I find a solution I'll post it as well.

  Thank you

  AFTER several months of pain, I found a solution to this problem:

  I got rid of this problem by reformatting everything using the original recovery disks.

  I tried this action before, but this time it worked.

  A friend told me that his laptop computer from a different company had a similar problem and found after hours of searching the sequence in which the drivers have been installed on its system had an effect ON the system.

  I'm not saying that this is the case here, but maybe something ' just clicked on '...

  No problem with my FingerprintReader more. I did this action 2-3 weeks ago and I got not a single occurrence of the FingerprintReader error.

  Good luck to all.

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after installation Thunderbird)

  I need to reinstall my Linux Mint 17 companion, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after Thunderbird installation)?

  You will need to backup your Thunderbird profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring #Manually_back_up_the_profile

• Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  I'm your pain ptapp!

  Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

  All 4 of my devices constantly ask my password because of some problems with xyz account.

  Then I enter the password only to be told that iCloud cannot check my password.

  Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

  I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

  Apple needs to fix this problem, if they have any idea how to.

• "404 - page not found" error message after downloading and installing Firefox 15

  "404 Page not found" error message after you download the latest version of Firefox.

  It is sometimes the result of a software firewall that protects you against modified applications. Or it could be something else. Can you look at this article and see if it helps: Firefox can not load websites, but can other browsers.

• Firefox claims she is already underway and will let me start a new session after closing of

  I had this problem intermittently on my Dell XPS 8000 and my laptop HP nx7400. Dell runs the latest version of Windows 7 Pro and HP running XP Pro (fully updated). After closing a session of Firefox and other applications running, Firefox won't let me open another session, saying that "Firefox is already running... Please close the session... "This is not an exact quote, but you get the idea. CTRL-ALT-DEL and all other conventional means do not work and I have to reboot the system. It is a royal pain... and I need a pain relief! Any suggestions? I can go back to an earlier version of Firefox until I see a solution... is not bad, but I really like 4.0, and I do not look back in the 'progress '.

  Thank you.

  Tom

  Looks like it is suspended when you quit, and then later try to restart Firefox.

  • How to stop the currently running Firefox process
    • In the Task Manager, firefox.exe will appear in the processes tab
  ?
• See: http://kb.mozillazine.org/Kill_application
• Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
• What can cause the hang out of Firefox
  • The Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
  • http://support.Mozilla.com/en-us/KB/Firefox+hangs
  • http://KB.mozillazine.org/Firefox_hangs
  • https://support.Mozilla.com/en-us/KB/Firefox+is+already+running+but+is+not+responding
• You may need to try the Mode without failure of Firefox
  • You may need to use Safe Mode to locate the problem:
    • See: http://kb.mozillazine.org/Safe_Mode
    • Users of Firefox 4, hold the SHIFT key while clicking on the icon of the desktop Firefox 4 to enter Safe Mode.
    • Firefox Safe mode is a diagnostic mode that disables Extensions and some other features of Firefox.
      • In Firefox 4, Safe Mode also disables Plugins and hardware acceleration.
      • If you are using a theme, place you in the DEFAULT theme: Tools > Modules > Themes before start Safe Mode (in Firefox 4, tools > Modules > appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
      • When you enter Safe Mode, do not check all the items in the window, just click "continue mode without failure."
      • A test to see if the problem you are experiencing is fixed.
    • If the problem does not occur in mode without failure then disable all your Extensions and Plug-ins, and then try to find the cause
      1. by activating one at a time until the problem reappears.
      2. You can also activate a little at a time (3-5), followed by what just you re-enabled to see if the problem occurs again. This will help narrow down the possibilities if you have a large number of Add-ons.
      3. You MUST close and restart Firefox after EACH change via file > restart Firefox (on Mac: Firefox > Quit).
      4. You can use "Disable all add-ons" on the start window Mode without failure.
  • See below for more information
    • http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes
    • http://support.Mozilla.com/en-us/KB/troubleshooting+plugins
    • http://support.Mozilla.com/en-us/KB/basic+troubleshooting

You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) that you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

• Next-generation Java plug-in 1.6.0_24 for Mozilla browsers
1. Check your plugin versions on one of the following links:
   • http://www.Mozilla.com/en-us/pluginCheck/
   • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
   • Note: plugin check page lacks information about all versions of the plugin
   • There are links to tests specific plugin available on this page:
     • http://KB.mozillazine.org/Testing_plugins
2. Update the Java plugin to the latest version.
   • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
     • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
       
   • See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
   • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
   • Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
   • Java test: http://www.java.com/en/download/help/testvm.xml

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Old computer BSOD when installing XP and randomly after installation

  I'm repairing an old computer (5-6 years old) who has problems.  Originally, it was full of viruses and was completely sunk, so I did a cleanup of the HD and reinstalled windows... However, increasingly, the owner complained to get BSOD once in a while.  It happened during my installation of windows as well.  The disc to load everything upward, and when he is at "Windows Installation", he gave me a BSOD error:

  STOP 0X0000006F (0XC0000020, 0X00000000, 0X00000000...)

  I did a Memtest86 + to verify memory, and after 10 passages, there was no error.  I also cleaned all the dust in the computer, which helped me to get windows installed, but has not fixed the random BSOD would happen after installing windows (this happens rarely, making it difficult to reproduce).

  At first I thought it was the hard drive, because the hard drive is old and use IDE cables, but he spent under UBCD Disk Diagnostic tools.  In addition, on a hunch, I tried the first 95, and of course it enough it crashed the computer.  What is the cpu?  Or something else going on?

  Single Minidump file has been generated, but I am including here:
  http://CID-676f5f905e0a077b.Office.live.com/self.aspx/minidump/Mini021611-01.dmp

  I think that it is likely that the CPU or the motherboard is at fault. If it's a very old PC, not worth the effort/cost to recover. I recommend a new PC.

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• I can't reinstall or uninstall CS4 on Windows 7. I get a message indicating one or more CS4 applications are running and neet being closed, which is not.

  How can I reinstall or uninstall CS4 on Windows 7. I get a message indicating one or more CS4 applications are running and neet being closed, which is not.

  Hello

  Please close the process below the monitor activity/task manager and try again:

  

  Kind regards

  Sheena

• I get an error message after you migrate my Adobe apps for my new MacBook Pro.  It reads "Adobe Creative Cloud is necessary to solve this problem.  However, it is missing or damaged. "I tried to download and reinstall a new copy but error

  I get an error message after you migrate my Adobe apps for my new MacBook Pro.  It reads "Adobe Creative Cloud is necessary to solve this problem.  However, it is missing or damaged. "I tried to download and reinstall a new copy, but the error message still appears.  Help, please.

  do not migrate the adobe programs.

  All uninstall adobe that you migrated.

  clean by, http://www.adobe.com/support/contact/cscleanertool.html

  and then properly install your adobe programs using the cc from here, download Adobe Creative Cloud apps desktop application | CC free trial Adobe