BSOD when a stress test (occurs after several Windows update)

Similar Questions

• Z50 - 75 crashes when the charger is disconnected after 10 Windows update

  Currently using a laptop Lenovo Z50-75, and after that put to upgrade to Windows 10 my computer will display an error "thread stuck in device driver" as soon as he starts the menu start when my charger is disconnected. So my computer is pretty much rendered unusable. I think that this could be a problem with the charger driver, but I'm not sure. Does anyone have a suggestion on how to fix this?

  
  

• Please help! After a windows update last night, I put my laptop on and it won't let me type anything in browsers or anything else.instead a question mark appears when you type!

  need help please, after a windows update last night, I put my laptop this morning and it won't let me type anything to, type all.cant in my browser, research or of anything.when I try to type a? will appear instead and if I press any key again and a new tab opens again and again, if you continue to press any keys.i tried the system restore and it does not work.when I tried troubleshooting my devices on my laptop there is an error code 43. I uninstalled the usb controller option he gave and restarted the computer. I can see is no longer this error.i hope he relocated the itself.anti virus is very good if can anyone help?

  laptop = hp pavillion (BEATS AUDIO)
  OP = WINDOWS 7

  Hi Dan MJ.

  Yes, you can go ahead and try the steps in my previous post and check if this solves the problem.

  If these steps is not enough you can follow these methods and check if it works:

  Method 1: I you recommend to turn off the computer, unplug the power, restart the computer and reconnect the USB device. See if the device is detected.

  Method 2: You can run the hardware and devices Troubleshooter and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also see the following article for more information about the error Code 43:

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873%28WS.10%29.aspx

  Let us know if that helps.

• When can I test IE10 on our windows 7

  When can I test IE10 on our windows 7

  Thank you Rafael - is this new official information?

  The "Internet Explorer 10 Guide for Developers" on the site MSDN still has the following:

  "Internet Explorer 10 is available for Windows 8 and Windows Server 2012 and is expected to be released for Windows 7 and Windows Server 2008 R2."

  Unfortunately I don't have any official information to give you, as I understand it if you take what I say with a grain of salt. Keep your ear to the ground however!

  (Caveat: I do not work for Microsoft.)

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• Satellite L25 - after that Windows update is unable to use the Wi - Fi button

  I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

  What I have to do is disable the adapter, turn it on, then re-boot.
  If I turned off the computer, I di everything again.

  This will make the button work? Or is there a setting that is always on?

  Hello

  > after a windows update, cannot use wi - fi on the front button
  Do you mean the button that launches Internet Explorer?

  According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
  Is this right?

  I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

  Welcome them

• SBS 2011 Unmountable Boot Volume after a windows update

  Server crash after a windows update.  I don't know what update, it was 8.  Seemed to have completed successfully.  I restarted as requested.  After the restart, he came and said configuration of updates, 100% done and restarted again.  This time, no matter what I do, safemode, networking, last known, all get the blue screen.  I tried to enter in the system recovery options to run a chkdsk /R and partition table repair and run fixboot, but when I get the drivers screen charge, I have all the drivers I can find for my raid controller.  Found 8 of them.  All of them seem to be add the driver, but in the end, the system will not respond.

  The system is a HP Proliant ML150G6 and card Raid is a HP Smart Array b110i.  RAID and discs all show 100% health.  It is a medical office, 5 days old backup, so we're a little desperate.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• No sound in browsers after a windows update

  OK, this is the second time that this has happened. While I was asleep Windows Update and now I have no less sound my browsers. I fixed it the first time by running a system restore, but I don't want to have to restore the system whenever windows updates. I am running Vista on a HP Pavilion (DV6 I think) I know that this has nothing to do with browsers, since it happened twice after a windows update.

  In addition, all is well in the mng device. and I can hear in media player.

  Hi ty f.

  ·         Are you referring to Internet browsers?

  ·         What browsers are installed on your computer?

  For Internet Explorer, you can consult the following suggestions.

  Method 1: Check if the sounds are disabled for the browser.

  a. open Internet Explorer. Go to Tools , then Internet Options.

  b. open the Advanced tab.

  c. scroll down to the multimedia section.

  d. make sure the box next to play sounds in web pages . Click on 'ok '. Restart Internet Explorer. A test to see if the sound will now play.

  Method 2: Reset the Internet Explorer settings. See step 2 of the following article.

  Internet Explorer is slow? 5 things to try - help & how-to - Microsoft Windows

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

• Qosmio G20-127: after that Windows update I can not see list fax and printer

  Description of the problem
  Model: Toshiba Qosmio G20-127
  Operating Sysytem: Microsoft Windows Media Center Edition

  After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

  I just installed printers.

  It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/823447/

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good