BSOD Windows 8 w/Netflix

Similar Questions

• "Windows has recovered from an unexpected shutdown" minidump (BSOD) Windows 7 file

  I had trouble with the BSOD Windows 8.1 and 10 so I went back to windows 7. It has been working well for some time however, when I play a video game it crashes. This is the first time since that I resorted to windows 7. Unlike Windows 8.1 and 10 I can boot into normal mode so I can continue to do what I want to do but I'd like to solve this problem, if it is severe.

  Here is the information of the accident.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80009C3A50
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\062616-26941-01.dmp
  C:\Users\Brendan\AppData\Local\Temp\WER-55520-0.SysData.XML

  If someone could please answer and show the steps to solve this problem that would be greatly appreciated.

  Thank you.

  Error checking 1A, {41284, 1 c 560001, 3fe0, fffff70001080000}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 4ac3)

  No drivers have been appointed in accidents, so please activate the driver verifier:

  Enable Driver Verifier:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

  Make a memory Test:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/BSOD-memory-problems-test-easily-and-completely/21c3f63f-F570-4522-b2ef-ecc7b7ff6461

  Download the new landfills when you get Driver_Verifier_detected_voilation

• Windows 8 Apps (Netflix, Hulu, Youtube, TuneIn) will not leak

  Windows 8 Apps (Netflix, Hulu, Youtube, TuneIn) will not leak

  I have advanced and updated the OS on my ASUS G76VW-DS71 to Windows 8. Everything seems to work fine, except for on the thing:

  None of the applications (Hulu Plus, Netflix, Youtube, TuneIn) continuous flow actually do anything. The apps will turn on and I can select a video, but when I press on play streaming won't start (Netflix get stuck on 97%). I can listen to all the services if I use a web browser but not Windows 8 applications. In addition, the Skype app stops immediately when you try to open it.

  Any ideas is what is the cause and how to fix it?

  The Windows Firewall will allow apps to pass through. I also disabled, but it did not help.

  I solved it!

  It was my video card driver. I have an ATI Radeon HD 4870 and I * was * installed Catalyst Legacy 12.6 of driver for Windows 8. Then I ran the Windows Installer of catalyst 8 version and select uninstall to remove all driver AMD components. Rebooted as directed, and installed a Windows driver. This driver allowed video!

  Then I tried to reinstall the version of Windows 8 of the Catalyst driver - and did not yet reading!

  I'm going to do some further study and update this post.

  Update:

  The driver that Windows installs that works is "ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1)", dated 19/06/2012, version 8.97.10.6.

  The driver provided by the supposed Windows 8 Catalyst driver package is "ATI Radeon HD 4800 Series", dated 07/03/2012, version 8.970.100.3000. For control purposes, I installed just the driver, not the software.

  Immediately after installation (no reboot was required) Netflix then gives an error code that there is a problem with the internet connection. Of course, the internet connection is fine.

  When I reboot, Netflix returns to its State at the death-to - 97%.

  Yes, up to what AMD Gets their act together:

  1. Uninstall your video driver using uninstaller AMD.
  2. Let Windows Installer for you.
  3. If you want other AMD software, run the catalyst on Custom Installer and make sure that the AMD display driver is not selected.

• BSOD Windows Server 2012 starting MSMQ service

  Hello

  We have a problem with a server get BSOD when we start a service related to MSMQ. Whenever we start the service as a user on the field, we get the noexecute BSOD memory execute attempt. When we start the service as local system, it starts without a problem. I got the crash dump here:

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * c:\symbols* http://msdl.microsoft.com/download/symbols

  Microsoft (R) Windows debug 6.3.9600.17298 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\170\120314-11828-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: Server, suite: TerminalServer SingleUserTS
  By: 9200.16912.amd64fre.win8_gdr.140502 - 1507
  Computer name:
  Kernel base = 0xfffff800 '48476000 PsLoadedModuleList = 0xfffff800' 48742aa0
  The debugging session: Wed Dec 3 14:41:01.892 2014 (UTC + 01:00)
  System Uptime: 0 days 0:04:09.904
  Loading the kernel symbols
  .

  Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
  Run! SYM noisy before .reload to track symbols loading issues.

  ..............................................................
  ................................................................

  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Verification of error CF, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}

  Probably caused by: mqac.sys (mqac! ACCreateQueue + a77)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)
  An attempt was made to execute non-executable memory.  The guilty driver
  is on the stack trace (and usually the current instruction pointer).
  When possible, the name of the guilty driver (Unicode string) is printed on
  verification error screen and saved in KiBugCheckDriver.
  Arguments:
  Arg1: 000007f982e340e0, virtual address for the execute attempted.
  Arg2: 791000010fdb1025, content PTE.
  Arg3: fffff8800485a5e0, (reserved)
  Arg4: 0000000080000005, (reserved)

  Debugging information:
  ------------------

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER

  BUGCHECK_STR: 0XFC

  Nom_processus: mqsvc.exe

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17298 (debuggers (dbg). 141024-1500) amd64fre

  TRAP_FRAME: fffff8800485a5e0-(.trap 0xfffff8800485a5e0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 000007f982e0c950 rbx = 0000000000000000 rcx = 0000005dff1fecd0
  RDX = 0000005dff34e988 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = 000007f982e340e0 rsp = fffff8800485a778 rbp = fffff8800485ab80
  R8 = fffffa800e623980 r9 = 0000000000000521 r10 = fffffa800ec547a0
  R11 = 0000000000000006 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI pl nz nc
  000007f9'82e340e0?              ???
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540

  STACK_TEXT:
  fffff880 '0485-408 fffff800' 48661ef1: 00000000'000000 fc 000007f9 '82e340e0 79100001' 0fdb1025 fffff880' 0485a5e0: nt! KeBugCheckEx
  fffff880'0485 has 410 fffff800'48588980: fffff880'0485a5e0 ffffd8e9 '9e6056e2 fffffa80' 0ec547a0 00000000' 00000000: nt! : FNODOBFM: 'string' + 0x33f2d
  fffff880 '0485-450 fffff800' 4850aabd: fffff880 '0485 a 500 00000000' c0000016 fffffa80 '0e603b00 fffffa80' 0e623980: nt! : FNODOBFM: 'string' + 0x33e85
  fffff880 '0485a4a0 fffff800' 484cdfee: fffff880 00000000'00000008 00000000'00000000 00000000'00000000 ' 0485a5e0: nt! MmAccessFault + 0x3ed
  fffff880 '0485a5e0 000007f9' 82e340e0: fffff880'00dc5297 fffffa80 '0ec54770 00000000' fffff8a0 00000000' 011ce7c0: nt! KiPageFault + 0x16e
  fffff880 '0485-778 fffff880' 00dc5297: fffffa80 '0ec54770 00000000' fffff8a0 00000000' fffff980 00000000' 011ce7c0: 0x000007f9'82e340e0
  fffff880 '0485-780 fffff880' 00dc60d7: 00000000' 0000005d 00000000 ' ff34e988 00000000'00000000 00000000'00000000: mqac! ACCreateQueue + 0xa77
  fffff880 '0485a7f0 fffff800' 488ab127: fffffa80 '0e5ed520 fffffa80' 0d50ecf0 00000000'00000521 00000000'00000000: mqac! ACDeviceControl + 0x62b
  fffff880 '0485-890 fffff800' 488c02f6: 00000000 00000000' fffff8a0'00000080 00000000 '00000000 00000000' 00000000: nt! IopXxxControlFile + 0x7e5
  fffff880 '0485aa20 fffff800' 484cf553: 00000000'00000000 00000000'0000000 c fffff6fb '7dbed078 fffff6fb' 7da0ff30: nt! NtDeviceIoControlFile + 0 x 56
  fffff880 '0485aa90 000007f9' 8a702c1a: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13
  0000005d 'ff34e928 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007f9'8a702c1a

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Mqac! ACCreateQueue + a77
  fffff880'00dc5297 85 c 0 test eax, eax

  SYMBOL_STACK_INDEX: 6

  SYMBOL_NAME: mqac! ACCreateQueue + a77

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: mqac

  Nom_image: mqac.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2

  IMAGE_VERSION: 6.2.9200.16384

  BUCKET_ID_FUNC_OFFSET: a77

  FAILURE_BUCKET_ID: 0xFC_mqac! ACCreateQueue

  BUCKET_ID: 0xFC_mqac! ACCreateQueue

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xfc_mqac! accreatequeue

  FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}

  Follow-up: MachineOwner
  ---------

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• What is the BSOD Windows 0 x 00000071 and can simply be fixed?

  Whenever I run to the top of my Windows XP, I get a blue screen with 0 x 00000071 and session5_initialization_failed. I have no idea what that means and I CAN'T run in Mode without failure or last known working configuration, they also give me the same error. I used to have the BSOD 0x0000007b but then I used a CD of Windows XP Recovery console and it changed to 0 X 00000071. Is there anyway I can fix it from home and keep my data? I tried using fixboot and chkdsk/r, and it does not help. I have also a certain blank CD I can burn but I don't have the original Windows XP cd.

  TechNet said that it is a mistake to Win2000, whatever it is, it relates to memory, or lack thereof. Chk this link

  https://social.technet.Microsoft.com/search/en-us/?query=0x00000071&refinement=82#refinementChanges=85, 86 & pageNumber = 1 & showMore = false

  Ensure that all memory cards are of the same type, 1 face or 2, do not mix the... Was xp never top &

  ongoing, in addition, youre cmd is incorrect by chkdsk, it must be: CHKDSK C: /F & if its recovery, his

  CHKDSK C: /p or/r

  In addition, chk or replace the MB battery if 3-5 years, read manual on 'how to '.

• Where in the event error Codes BSOD Windows XP store Viewer

  As the title States where Windows XP Professional SP3 with 0 x 86 stores the error logs when a blue screen happens? I can not find I checked in the system log, but could not yet identify the BSOD error codes. I activated to connect with these error codes when it occurs.

  Can someone tell me where to find the error codes to stop Windows (BSOD)? Also, if you can describe what the entry will look like it should help.

  Thank you

  Victor

  VM

  You have several questions.

  1 - this one accident was linked to Redlight. sys with description BufferZone Kernel Module is a driver file of the BufferZone belonging to BufferZone product company.  That needs to be removed (at least for testing)
  
  2 - cumon
  Associated cumon.sys driver filter system provider (R) Win 7 kit Windows DDK CRCMon (it's a minor issue)

  3 - cmuda.sys related to cmuda.sys C-Media Audio Driver (WDM). YOURS IS 2002

  How to find drivers:

  
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• Windows install silverlight netflix failure

  A couple of days my Netflix started running slow and sound was intermittent.  That evening, I noticed that You Tube not work indicating that I had to load Adobe Flash player.  I did, and You tube came back fine.  Late in the evening, I went with Netflix and they recommended that I reload Silverlight after uninstalling it.  I tried to uninstall it, but couldn't so I tried to reinstall it and a message says that it was already installed.  I started a complete analysis with Microsoft Security essentials and went to bed.  Security Essentials has not finished scanning.  The next morning I wake to a frozen desktop.  I could not start Security Essentials and I can not install or uninstall anything.  I can't drag or copy and paste files to get away from this laptop.  Tried safe mode and did a restore to ten days earlier.  That seems to be going OK but it doesn't really have anything fixed.  Still can not drag, drop or copy - paste or send anywhere.  I really need to get my safe files so I can reload Windows or fix it somehow.  Also the Internet Explore has disconnected and not start or connect in any way to the DSL Modem.  I got this laptop to a friends house and wireless not connect either.  Any ideas?

  Hello

  1. do you get an error message trying to copy and paste any file or just trying to open the browser?
  2. were you able to copy and paste files without any problem in safe mode?

  Step 1: If you are able to copy and paste files without any problem in safe mode then try to perform the clean boot on the computer.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.
  Reference: http://support.microsoft.com/kb/310353

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  I suggest you to report any problem of Microsoft Silverlight in the Silverlight.net Forums.
  http://forums.Silverlight.NET/forums/

  See also: How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651

• BSOD - Windows XP & Dell D630

  We have several Dell D630 laptop computers who have experience of many BSOD per day.  The machines work fine when they are not attached to a network.  However, once they plugin for the network, start the BSOD.  All PCs are under Windows XP SP3.  We have updated the driver for the CARD on a few PCs and no change.  We have applied all MS updates and there is no change.

  Any suggestions?

  Hello

  1. how many laptops are connected to the network?
  2. what version of Windows XP is installed on the computers?
  3. do you get an error message when the blue screen appears?

  Verify that if the problem exists in Mode safe mode with networking, if the computer works as expected in mode safe mode with networking, and then we can solve the problem in the clean boot state.

  a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Blue screen (BSOD) Windows 7

  I am on Windows 7, usually got crashed when im using the internet browser. It happened on once or twice daily. I checked it using WhoCrashed and there are many problems that fails. I've corrected some of this problem, but there is much more to the left that I can't fix it by myself so far. Here, I have 3 recent files of dmp BSOD. I have included my file specifications of computer there too. I hope this is enough information.

  DMP files a link:

  https://onedrive.live.com/embed?CID=5133CA8AE7748244&RESID=5133CA8AE7748244%21107&AuthKey=AB3Mo2HNzs6Crt4"width ="98"height ="120"frameborder ="0"scrolling ="no ".

  First step, you need to update to service pack 1.  IN itself, which can solve the problem

  Service pack 1 update.
  
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1
  Service pack 1 update.
  
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

• Event 1001 bugcheck BSOD Windows 7 Ultimate 64 bit

  I've updated all the drivers, I always get this random BSOD can someone give me pointers or a solution to this problem starts to be a real frustrating of processes on the computer is only a few months, his current running Windows 7 Ultimate 64 bit, before it was 8.1 Home 64 bit had the same issues, so I went back to 7.  I check the event viewer and see it displayed.

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 02/12/2015-12:45:03 AM
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: DumaMink
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000024 (0xfffff88007a303f8, 0xfffff88007a2fc50, 0x00000000001904fb, 0xfffff880012f1bf7). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 120215-44631-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      8038
     
     
      System
      DumaMink
     
   
   
      0 x 00000024 (0xfffff88007a303f8, 0xfffff88007a2fc50, 0x00000000001904fb, 0xfffff880012f1bf7)
      C:\Windows\MEMORY. DMP
      120215 44631-01
   
  

  Then I see this posted a few laps down

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 02/12/2015-12:44:38 AM
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: DumaMink
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      7992
     
     
      System
      DumaMink
     
   
   
      36
      0x1904fb
      0xfffff88007a303f8
      0xfffff88007a2fc50
      0xfffff880012f1bf7
      fake
      0
   
  

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  You can consult the troubleshooting steps mentioned in the following Microsoft support article.

  Resolve stop (blue screen) error in Windows 7

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Let us know the results. Hope this information was useful.

• BSOD Windows 7 even after formatting

  Windows 7 64-bit, 8 GB of ram DDR3, GT650m laptop, suffering from BSOD. I already have the minidump file but I don't know yet how to analyze them. I ask with you guys like the usual teehee.

  https://www.mediafire.com/?vvt39sc2nph7k1n minidump file

  These accidents were related to the corruption of memory (probably caused by Symantec).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Another BSOD - Windows 7 64 bit

  Hey guys, have a portable game that was making BSOD recently. GeForce 660 M, i7 processors (all unparked). Heres my dmp file to a disk: https://onedrive.live.com/redir?resid=9B8673FC96561BF4! 124 & authkey =! AN1zYCjgYKDxe5w & ithint = the file % 2cdmp

  PLEASE HELP ME! I do not think it is a hardware problem, could be a pilot.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update the BIOS and the weak)
  level chipset drivers on the site of the constructor/the system motherboard.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ==========================================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do you get the subtitles to work in Windows Media Center Netflix?

  I have Windows 7 64 Home Premium with Windows Media Center for a Home Theater Personal Computer.  I can watch Netflix streaming movies with subtitles using IE8 or IE9 and Silverlight, but may not know how to activate in Windows Media Center.  The always cheerful and almost all means useful Netflix Customer Service says only Microsoft can manage Netflix plugin for Windows Media Center issues.

  No support to do this from Microsoft, does anyone know how to do this?

  Hi keepitsimple.

  This feature is not currently supported in Netflix for Windows Media Center. If you want to apply, you can contact Netflix to let them know:
  http://www.Netflix.com/contactus?lnkctr=cuPh&show=true
  I hope this helps.

• BSOD Windows 7 Professional when the system is restarted

  Hello team,

  Can someone please review the BSOD Crash Dump at the link: http://1drv.ms/1w4OJSm and help me with what I need to do to solve this problem.  I have no problem with my machine except when I try to shut down or restart the system and then I constantly get this BSOD Crash Dump.  If you can help me with this problem it would be greatly appreciated.

  Thank you and best regards,

  E-mail address is removed from the privacy *.

  Hello team,

  1. because I don't have a spare machine I ran the utility auditor of Microsoft may not be able to turn it off.  I apologize.

  2. I have day a virtual digital badge and then I got a new BSOD pointing PCI.sys as long as possible problem.  Please mention the BSOD Crash Dump: http://1drv.ms/1ww5oZN

  3. Finally, I tried to end the Windows session before rebooting my machine and then I rebooted successfully without a BSOD.  After disconnecting...   CTRL + DELETE to log on...  Then a box will appear so that you can restart or shut down your machine.  I chose the reboot and the system has rebooted without a BSOD.

  4. I will continue with this procedure to restart my machine and if I'm not getting any BSOD I will consider this issue resolved.

  Thank you very much for your support...

  Regarding the new DMP file, it was related to e1c62x64.sys Gigabit adapter NDIS 6.x driver of Intel Corporation (yours is 3 years old).  I remove and install the most recent available.

  Args: 00000000 00000000 00000000 00000000
  > [16, 3] e1 0 fffffa800af83050 fffff800036d4210-fffffa800a823160 00000000 success error cancel pending
  Cannot load the image \SystemRoot\system32\DRIVERS\e1c62x64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for e1c62x64.sys
  ERROR: Module load completed but symbols can be loaded for e1c62x64.sys
  \Driver\e1cexpress nt! PopSystemIrpCompletion
  Args: 00016600 00000000 00000006 00000005
  [0, 0] 0 0 00000000 00000000 00000000 - fffffa800a823160

• BSOD Windows 7 (kernel data Inpage Error) random

  Windows 7 32 Bit Pro with an AMD Athlon II X 2 255 CPU with 3 GB of ram and an OCZ 120 OHS 3.11.

  I just read the recent post on this on 5 March and I was also very recently put randomly shut downs but no BSOD so occasionally with core data by Page fault with an error 0x0000007A.

  Have just run check that you recommended in this post and got a BSOD on reboot with him saying "windows has stopped for IO has detected an error in the pilot..." 0x00000C9 error code.

  I have the mini zipped and loaded to face book here https://www.facebook.com/mike.crawford.1029 dump file

  Any help is appreciated.

  Thank you

  Fantastic, thanks for the update! I'm happy to hear.

  If you are comfortable and feel that your problem has been resolved, I recommend you to mark all messages from my friends who responded to your question as answered so this thread is no longer present as requiring a response.

  Kind regards

  Patrick