BSOD Windows Server 2012 starting MSMQ service

Similar Questions

• Windows server 2012 default behavior services

  Hi all

  I recently installed Windows server 2012 R2 on my PC and found that the Windows update service "wuauserv" starts and stops automatically after a certain time. I think the same happens for Windows 8 and 10 more. The startup type indicates that automatic (early release). Through various articles and forums, I realized that this is the default behavior, introduced in Windows where inactive services will stop automatically and works only when triggered by certain policies.

  I want to change this default behavior and want Windows update services to be able to run always. Could you please tell how to make these changes.

  Kind regards

  ADI

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• 6 of WSUS on Windows server 2012

  Hello

  I am trying to configure SCCM 2012 (painfully)
  I get a lot of error messages.
  WSUS does not work: can not synchronize updates.
  wsusservice (in services.msc) will not start (error 193 oxc1)
  If wsus works 50% (you can see some Update Manager wsus on windows server 2012) because some service: do not start WSUSservice and ContentSyncAgent!
  In sccm 2012 config console manager, status of the status/component system, I get a critical error for SMS_WSUS_Control-Manager:
  Failures have been reported on the "our FULL domain name server" WSUS server for WSUS 'ContentSyncAgent, WSUSService' components,.

  Solution: Check that the failing WSUS components are installed and running.
  another mistake criticism for SMS_AMT_operation_Manager:
  The service point of band off unable to connect at the point of registration.
  Our config:
  WindowsServer 2012, sql server 2012, sccm 2012 sp1 on hp proliant Server
  It really painful
  Thank you if you have an idea

  Hello tomy13,

  Microsoft Community is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. As your question is about 6 of WSUS on Windows server 2012, your question would be better addressed in the TechNet for ITPros forums.
  Click on the link here to transfer your question in TechNet in the Windows Server forum.

  Sincerely.

  Marilyn

• Windows Server 2012 R2 BSOD 0x0000013c

  Hello

  I have some problems with one of my files Windows 2012 R2 servers. Each week the server crashes with a BSOD INVALID_IO_BOOST_STATE (code: 0x0000013c). Some research told me it should be a pilot with a memory leak.

  Client: Windows Server 2012 R2 update, 10, LSI Logic/Paravirtual storage controller hardware version (tried both), NIC vmxnet3

  Host: HP Proliant DL380G7 and G8, ESXi 5.5 Update 1 and 2

  3 other files with the same configuration servers have no problem, they are all from the same model.

  Like I don't know what else to do, you have any suggestions how to fix?

  Thanks in advance!

  Best regards

  Roland Schauer

  Oh wow, haven't seen it for a long time.

  as for my analysis, it seems that your security software Trend Micro goes haywire in your system. Your OS crash caused by OVERLAPPED_MODULE: address regions of overlap 'TmXPFlt' and 'TMEBC64.sys'. Where 'TMEBC64.sys' belongs to 'Start clean boot Driver' Trend Micro and the TmXPFlt seems to have some sort of basis for security suite library. The threading button somehow an invalid memory, the operating system enters a kernel panic. I suggest another solution of security or patch up to the latest version available - application and operating system.

  Roland, can you send us your landfills so we can take a look at as well?

• PowerEdge 2850 Windows Server 2012 do not start

  Well, I have a PE 2850 that was loaded to the top with Windows Server 2012 at the beginning of the year last as part of our upgrade to Windows 7. Even though I know that Windows Server 2008 is the latest version of Microsoft to officially support the SCSI interfaces as RAID PERC 4E/DI included in the 2850 card, I was able to work around in first install 64-bit Server 2008 with the SCSI drivers and then doing an upgrade online to the 2012 server.

  Everything went fine for the last year and half, but when I got to work yesterday, the server had crashed and he was sitting on the screen of the BIOS with the following error message:

  Memory/battery problems were detected. The adapter has recovered, but cached data have been lost. Press a key to continue.

  I pressed on enter and the server started to move to a preparation repair screen Windows where the progress bar is not long about 80% of the way and then froze for more than an hour. Subsequent attempts to restart in safe mode led to the server of freezing for several minutes before restarting once more to this same error message at the Windows logo screen. I can pull up to the management of the RAID and see my partitions still there, and I even loaded my readers in an old PE 2600 to check consistency on the logical drives (no problem found). However, the old 2600 is 32-bit architecture and it won't try to boot into the operating system.

  At this point, I'm really just trying to get a full backup of my system. I don't mind getting a new server, but I don't want to keep throwing money at this old piece of 12 year of equipment without knowing if it works or not. The problem is that 2012 uses ReFS, and none of the recovery programs I found can access my logical volumes. Boot from the OS Installation disk in the recovery console doesn't work, because the OS disk does not include SCSI drivers native to be able to see the score of the OS or the data partition.

  I think I'll call a few services data recovery tomorrow, but I would check here for ideas first. Any input is greatly appreciated.

  Microsoft has removed native SCSI support with 2008 R2, but R2 2008 provided Dell drivers for the PERC. These drivers work for the installation of Server 2012 as well.

  Memory/battery message: all stop and order the memory of replacement for the controller RAID, 4D554 part number. Nothing related to the operating system won't work (installation, repair, etc.) until you do. This question is very specific to the PERC 4e/Di on the 28 x 0.

  The 2850 is not 12 years. First of all, he started 10 years ago to shipping.

• Windows could not update the Configuration to start the computer. Windows Server 2012

  I am trying to install Windows Server 2012. When installing, I get the message could not Windows Update to the Configuration to start the computer. Installation cannot continue. He cancel the installation. Can someone help me with my problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows could not start the service on the Local computer Windows event log. Windows 2008 R2 server

  When I try to start the event log service can I have on my server (Windows 2008 R2), I get the following error:

  "Windows didn't start the service on the Local computer Windows event log."

  Error 2: the system cannot find the specified file. »

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Installation of Windows Server 2012 does not start

  Hello

  I am trying to install windows server 2012 I downloaded from my MSDN subscription.

  I'm installing on HP 8100 Convertiable minitower.

  Loading files, then when the windows icon it just restart the computer, and he in an endless loop of Windows startup.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Put into service Windows Server 2012 R2 takes a long time

  I created a simple bluerpint with Windows Server R2 2012 machine and the deployment of the Clone related vCAC. The whole process of commissioning is to take a very long time (> 1 hour). It seems that most of the time is passed to the workflow to work CustomizeOS stage. What could be the problem? I have not found the newspaper to find out where she is spending time. Can you help me solve this problem?

  I could solve this problem. There is a new Agent for Windows Server 2012 R2 guest. See VCAC 6.0.1 agent 2012 comments stuck Windows

• R2 Windows Server 2012

  Hello

  I use windows server 2012 r2 and have some difficulty at the start of services such as, AenService, gupdte, the windows module installer does not start, I tried to start it manuely but the result was the same, please give me the solution

  Concerning

  Jean baby

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Image acquisition turns off in Windows Server 2012

  I am running Windows Server 2012.  Kind of a necessity, that I also hosts the website of our company.  All updates are installed, and desktop experience is enabled.  Image acquisition Windows is listed in Services, but was originally set to manual by default.  I tried just to start the service, but it stops automatically after about 30 seconds.  I tried the automatic configuration, but it does not start on its own.  I get no error message, and I checked dependencies, which seem fine departure, because repeatedly referenced in many other assignments.  Fresh ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Satellite C660 - 1 DG-drivers of Windows Server 2012

  I started Windows Server 2012 (for development purposes).

  Now... where can I find the drivers?

  * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
  * sound driver * -.

  What drivers Miss do you?

  Fact is that Toshiba offers all drivers for supported operating systems.

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)