BT SmartHub with airport Time Capsule

Similar Questions

• Can I use Apple TV with airport Time Capsule 3 to 4

  Can I use Apple Airport Time Capsule 3 to with Apple TV 4 as available storage to stream my movies, etc.? I tried external hard drives but Apple TV will not read them.

  Not directly, it would have to be pointing at iTunes and listened to using home sharing

• Create wireless network with airport Time Capsule

  I replace my ISP provider rented the modem / router with a modem, I bought and I would use my gen current airport Time Capsule to set up the wifi network. I can't find the instructions on how to proceed and AirPort Extreme do not seem to apply.

  I am running OS X Capitan 10.11.3 on an early 2015 MacBook Pro.

  Thank you!

  Dale

  I can't find the instructions on how to proceed and AirPort Extreme do not seem to apply.

  Hmm.  A time Capsule is an AirPort Extreme with a built-in hard drive, so what works for one should work for the other and vice versa. You might be looking at old operating instructions?

  Since you've decided to add a new modem, Time Capsule will be reset back to the default settings and then set it up again to work with the new modem.  Apple installation "wizard" will guide you in installing the time Capsule, by appointing a wireless network, set up a password, etc, so the process is very easy to name.

  The installation provided with your Time Capsule Guide goes on how to set up the time Capsule.

  After resetting the time Capsule to factory default settings, you would connect an Ethernet cable from the modem into the "O" on the Time Capsule WAN port.

  To get the "Assistant" Setup running, just click the WiFi icon at the top of the screen of the Mac and are looking for the new AirPort base station. Just below that, click directly on the Time Capsule.  The example below shows an AirPort Extreme, but you would see on your screen time Capsule.

  

  When you click on the Time Capsule, the next screen that is displayed looks like this, except that you will see a picture of a Capsule of time on your screen.

  

  Simply click next to get the process going and follow the instructions.

• How to perform a manual backup full with airport Time Capsule

  I want to switch to OS X Yosemite.  Before I do that, I want to perform a full manual backup of my system at the airport Time Capsule.  I was not able to find instructions on how to perform a manual backup by using the existing time Capsule.  Thank you.

  Dick C.

  Go to the Time Machine icon in the menu bar and click on NTI Backup Now

• Extend the reach of the WiFi with airport Time Capsule and Airport Express

  I want to extend the range of my WiFi network running on a Time Capsule with an Airport Extreme airport. The Internet, ADSL, signal goes from the cable box in a closet and has two Ethernet cables connecting the box. I installed a simple Ethernet switch and ran inside, with both Internet cables Ethernet Miss and in two rooms in my apartment. I created the Capsule of time like the WiFi router, then the Express in the other room in Bridge Mode to extend the range of the WiFi network and enable AirPlay. This configuration works well for a while, but after a certain time has problems. The Express seems to go back to the creation of the WiFi network on its own and I saw the problem of the conflict addreses DCHP.

  What seemed to work correctly using the Express as the "pivot" and I fell straight Internet on it and an Ethernet cable to connect the Time Capsule in Bridge Mode. It's far from ideal for me, however, because I like the Express to be in another room to extend the range of the WiFi network in this part of my apartment and be able to use it for AirPlay.

  Help, please.

  If you could let us know what operating system you use on your Mac or PC, we'll give you a configuration suggested for the AirPort Express, which will allow the Express and the Time Capsule to connect to the Ethernet switch and perform correctly.

  We assume that the switch and the wiring will function properly in your current configuration, as well as the time Capsule, is that correct?

• restore the new mac with airport Time Capsule

  Hello, when I google the title of this question, I get nothing but how to restore with time machine. I understand that the time machine is a backup

  the system on the local drive. How do you with ATC?

  You will be able to migrate your data from the backup when you configure the new computer; Click here for more information.

  (143273)

• New connection airport Time Capsule with others

  Quick question I have a new airport Time Capsule. I'm trying to connect my 2 extremes of 2 airport with the new unit. They are in 2 different places in the House, I see them in my utility, but they're more connected... Lost... Help?

  Are you using ethernet to connect or wireless extend?

  When you installed the TC you replace an existing router that used EI or did you do a clean install?

  If you want to extend wireless simply reset the two AE at the factory and start on with installation... they should auto select this option to expand the TC in wireless... but you must start with them the two reset otherwise it will mess up the network.

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• Need help with the implementation of a replacement airport Time Capsule

  Hi... Recognizing the help. My 1 TB airport Time Capsule (ATC) crashed and I bought a new 2 TB ATC to replace. In my preference system, Time Machine reflects that my ATC 1 TB is still active. How to pay safely my 2 new cases of tuberculosis ATC to replace the 1 TB ATC?

  Assuming that you 1. already connected the new TC on your network, and/or 2. you were able to save all data on TC 1 TB, or simply do not take care of him You can just open Time Machine preferences, turn the Time Machine off, and then select the disk in the new time Capsule. A brand-new first backup starts to run, and it will certainly take time.

  Another option is to connect the new TC on ethernet directly on your Mac and then select the Time Machine preferences, this will speed up the first backup.

  In case you were able to archive the old backup and transfer it to your new TC, you will continue your backup schedule by simply selecting the new TC in Time Machine preferences.

  I hope this helps.

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• AirPort Time Capsule Help!

  I have an airport Time Capsule, which supported my computer for the last 2 years.  We have recently changed our router and now cannot save.  This is obviously because of the wifi name and different password for what is stored in the time Capsule.  I looked at various manuals and notes help but it says click on edit and I don't see it.  There is no change when I go to Applications - Utilities - airport, just my time capsule with

  Open Airport utility. Go to wireless setup using the menu of the button on the upper part of the Airport utility display window. Here, you can change what you need to change - the network name Wi - Fi and the new password. Click Update when finished.

• Parameter problem to the airport Time Capsule

  Already, we currently have a WiFi system with a NetGear router and a modem from Time Warner.

  I just want to use the airport Time Capsule to back up my Mac.  My husband has a PC.  I followed the instructions but the airport still comes up in the utility.

  Mac OS X El Capitan 10.11.6 and the latest 802.11 ac 3 TB so I don't know what I'm doing wrong.  I plug an Ethernet cable at the airport, then in the Modem - nothing after I plug the power - Amber flashing light.  I have changed ports unplugged and plugged back in French - restart the Modem.  Nothing works.  I bought it so it would work straight out of the box - so far, I have spent a lot of time trying to understand it.

  Any help would be so appreciated!

  Hello

  Try the help in this support article > Wifi hotspot: understand and resolve a blinking light of amber status - Apple supported

• Airport Time Capsule 2 TB blocking my internet access.

  I just bought a new airport Time Capsule 2 TB. When it is plugged in and running, I lose access to the internet! There is a wifi wireless in the House. What is the cause?

  There is a wifi wireless in the House. What is the cause?

  Potentially, Yes. Network Wi - Fi of the new Time Capsule can interfere with this other Wi - Fi router. What is the brand and model of the other device? What are your objectives of networking for the Time Capsule (TC)? In other words, do you want to expand the wireless of the other device, or create another Wi - Fi network, or something else?

• My LAN airport Time Capsule 802.11ac began to abandon their studies on the Cox network.

  My local network that the internet began to abandon their studies in airport Time Capsule 802.11ac associated with my network of Cox. The green light stays on. Unplug it and plug it back bring it will return immediately.

  I disabled IPv6 on the suggestion of the counsel of COX because Cox and Apple have a problem with these capsules of time regarding IPv6 and IPv4 is supposed to work.

  It is a question of cox or should my time capsule service?

  This modem do you have? Brand and model please.

  It may be a contributing factor, where the transition to IPv6 is causing issues, but raised another problem.

  He has also reported a DNS issue... Please fix the DNS servers of your TC... (IPv6 is set to link-local now in your TC?) Assign the values google DNS and see if it improves things.

• Implemented new airport Time Capsule

  When defining the new airport Time Capsule, I think you have the ability to create a new wireless network or extending the existing.

  What is the best choice and why?

  Thank you

  Create a wireless network is used only when an Ethernet cable connects permanently to another router or a modem to time Capsule. Like the illustration in the Installation Guide.

  Extend a wireless network is used only when the Capsule connects wireless to another router from Apple.  This parameter cannot be used if you have a 3rd party router providing your wireless signal.

  Bottom line... Use the option create a wireless network with an Ethernet cable... unless... you already have another router from Apple and you want the time Capsule to connect wireless.