Bug in InlineGraphicElement with integrated resource

Similar Questions

• Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

  Good evening
  I have a toshiba qosmio f60, I read your answer about tv tuner.
  My question is: how to set up the tv with integrated antenna tuner? Thank you

  The tuner is already configured!
  You must use Windows Media Center.
  Here, you have to choose the tuner and need to look for available DVB - T channels.

  Notes; Signals DVB - T depends on the country and region.
  In my area I needed an external antenna because the signal is too weak.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• pre-non-empty with the resource in the form field id

  Hello

  What is the most effective way to pre-fill a form field in the console design with the resource id that we are provisioning?

  Thanks for your help already!

  You can write the code that get the key of the process as an argument instance and returns the resource id. I don't remember the STANDARD adapter for it.

• SDM with integrated weblogic server

  I'm testing a simple application with SDM and saved searches with integrated weblogic server and the file system option. I have installed schema MDS on local DB (Oracle XE) but still not use it.

  I have enabled the option "Enable user customizations" in the option display ADF in the project properties and also checked the box 'on the doctors use sessions. Also in the application properties-> run-> MDS-> I prevail on the location of the location of the file.

  I have enabled security on the application and have put in place two or three users application. But when I run the application it does not show me saved searches that I set up in previous sessions. Nothing is getting stored in MDS.

  Y at - it something that I'm missing... any stage?

  Pointers is useful

  JDev: 11.1.2.4

  Thank you.

  You must set the layer of customization. You must add UserCC if you want to record things for a particular user. Go to adf - config-> MDS Confriguation-> add UserCC class provided by the framework of the adf.

  You must also define which component and the attributes, you must save in adf - config.xml-> view-> Tags (you must save the components) and tag attributes (attributes of the components that you want to record).

  Now do not run the application, deploy the application to your built-in wls and select Basic MDS file and complete the deployment.

  Thank you

• Unable to deploy VIO 1.0.1 with integration of NSX

  Hello

  Whenever I try to deploy VIO with integration of NSX I stuck on step "Configure network neutrons.

  Drop-down menu dashboard Cluster does contain all the options and so I can't go ahead with the deployment. (DVS works very well)

  Like that a deployment of POC, I use the same cluster management nodes, NSX Edge nodes and users of virtual machines.

  According to the documentation that the configuration is supported, even it is not recommended.

  Thank you

  Max

  Not sure if this is the cause of your problem. But the Mgmt and edge VM can be in the same cluster. However the tenant virtual machines must be on a separate cluster. There are therefore at least 2 groups.

  Arvind

• How to return an * optional * custom http header with a resource model?

  Is it possible to return a http header custom optional with a resource of Apex (v1.1.4) earphone model?
  
  Reading the documentation does not indicate how this works:
  http://docs.Oracle.com/CD/E21611_01/ doc.11 /e21058/rest_api.htm#BGBDFBJF
  
  A test, I set up a model of resource to try it. I use the handler method is POST, type is 'PLSQL Block', and my custom settings are:
  
  Name: personnalisee01
  Aliasing: x-personnalisee01
  Source: header
  Access: EXIT
  Type: String
  
  PL/SQL block:

  BEGIN
    :custom01 := 'my string';
  END;

  And of course, I get a custom header in the response http like this:

  x-custom01 : my string

  Then, taking a hypothesis that the NULL value for the parameter may cause the listener to Apex do not send the custom header, I changed the PL/SQL this:

  BEGIN
    :custom01 := NULL;
  END;

  This time, however, the url announcement causes Apex listener to return a 500 status and in the log file, I get:

  INFO: null: Invalid column index
  java.sql.SQLException: Invalid column index

  In any case is to make my custom http header exist as an option? The most intuitive way to just return null to the variable binding, but of course, this does not work!
  
  Thank you
  Jack

  Yes, to be clear, the issue is that binds through comments (- or / * /) are not handled correctly, I have not yet verified, but I think that the problem will occur in 2.0.x so.

• Bug with integrated SET_LOV_COLUMN_PROPERTY (or FORMS_SUCCESS). FRM-41364.

  Hello world
  I have an internal pll library that supports the translation of custom multilingual forms.
  
  In general, this code works perfectly well.
  
  One task of the code is to analyze a custom-shape and create a list in a table custom translations of all the elements, buttons, LOVs, windows, etc. in the form - i.e. all items that can be/need-to be translated, such that the user can then update/maintain.
  
  When it comes to LOV columns, there is no direct way (AFAIK) to indicate the number of columns is in a LOV. In addition, there is no GET_LOV_COLUMN_PROPERTY. So, what is the PLL's LOOP of 1... 10 (making the assumption that no LOV will be more than 10 columns) and each time around the loop it calls the SET_LOV_COLUMN_PROPERTY (curr_lov_name, loop_index, TITLE, "); that actually does nothing, but then the code immediately makes a call to FORM_SUCCESS.
  
  If TRUE, then we know the SET_LOV_COLUMN_PROPERTY worked, which means that there is a numbered column < loop_index > so we can insert a record into the table of translations for this one, if FORM_SUCCESS is false, then do nothing (other than the loop around a few times to get us to 10) and then fall out of the loop). It is not ideal, but it works... except - for a particular form, the code triggers FRM-41364.
  
  Initially, by habit, I have attached the code in an anonymous block, but I remembered that built-in is throwing exceptions when they fail.
  
  So I sprinkled in a load of messages for debugging (via COMMETTRE STANDALONE) and in fact the call to SET_LOV_COLUMN_PROPERTY is the last call before the FRM-41264 error appears on the screen. Can someone understand why this error appear on one form and not the others? The LOVs look identical (in terms of properties, etc., of course selects it real is different). I even created a new LOV in bad shape, in which case it was something corrupt, but I had the same problem.
  
  Error FRM-41364 is a mistake to level 99, so the setting of the: system.message_level should not have effect (you can set from 0-25).
  
  There is another possible mystery idea - when I put in the debug messages, I put one between the call SET_LOV_COLUMN_PROPERTY and FORM_SUCCESS check, which later I removed because Oracle would recommend against it (i.e. you must always call FORM_SUCCESS immediately after the built-in test). However, I fact of the notice in the error log which not only makes the debug message 'before' appear, but also debugging 'after' message. It's as if the FORM_SUCCESS call was actually one that triggered the FRM-41364, which was strange to me.
  
  I use Forms Builder 10.12.0.2 on Windows XP, and I am compiling on an instance of R12.1.3 EBS running on a 11.2.0.2.0 database.
  
  Here is the code, notice - the exception section is never called:
  

  FOR loop_index IN 1..10 LOOP
  
    debug ( 'Before Anonymous block');
  
    BEGIN
  
      debug ( 'Before set_lov_column_property');
  
      set_lov_column_property (curr_lov_name, loop_index, TITLE, '');
  
      IF FORM_SUCCESS THEN
  
        debug ( 'Add LOV column for translation');
  
        my_package.my_insert_translation_proc();
  
      ELSE
  
        debug ( 'FORMS_SUCCESS - FALSE');
  
      END IF;
  
      debug ( 'After FORM_SUCCESS test');
  
    EXCEPTION
  
      WHEN OTHERS THEN
  
        debug ( 'EXCEPTION');
  
    END;
  
    debug ( 'After block');
  
  END LOOP;
  
  debug ( 'After LOOP');

  Thanks in advance for any help or suggestions that anyone can offer,
  Alan.
  
  Published by: 958388 on 11-Sep-2012 07:59 (typo in the title)

  Alan,

  Relaxation check-ERROR for "a particular form. I think that most of your forms silently removes FRM-41364. All except this one.

• Problem with Integrated Weblogic Server in JDeveloper

  Hello

  I use JDeveloper version: 11.1.1.7

  I am facing problem with the Weblogic Server integrated into JDeveloper.

  When I start the server, the log shows as follows:

  Using the 7101 port *.

  D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd

  [waiting for the server to complete its initialization...]

  .

  .

  Memory of JAVA arguments: - Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m

  .

  Start mode of WLS = development

  .

  CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_ 1/lib/Ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\ fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar

  .

  PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin; C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ ADE\bin; C:\Windows\System32; C:\Windows; C:\windows\System32\Wbem; C:\windows\System32\WindowsPowerShell\v1.0\; C:\Program Widcomm logiciels\. C:\Program Widcomm Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin. C:\Program Files (x 86) \Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8

  .

  ***************************************************

  * To start WebLogic Server, use a username and *.

  * password assigned to an administrator-level user.  For *.

  * server administration, using the WebLogic Server *.

  * the http://hostname:port\console console *.

  ***************************************************

  from weblogic with the Java version:

  Java version "1.6.0_51".

  Java (TM) SE Runtime Environment (build 1.6.0_51 - b31)

  Java for 64-bit Server VM (build 20, 51 - b02, mixed mode)

  WLS starting with line:

  "D:\Java\JDK16~1.0_5\bin\java-client-Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy - agentlib: jdwp = transport = dt_socket, server = o, address =-Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks 49879 - Dhttp.proxyHost = www-proxy.idc.oracle.com-Dhttp.proxyPort=80"-Dhttp.nonProxyHosts = localhost | 127.0.0.1 | rnaguban - in '-Dhttps.proxyHost = www-proxy.idc.oracle.com-Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts = localhost | 127.0.0.1 | rnaguban -»-Doracle.jdeveloper.adrs=true-Dweblogic.nodemanager.ServiceEnabled=true-Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM-Dweblogic.log.Log4jLoggingEnabled_uim=true-Dlog4j.configuration_ = UIM loggingconfig.xml-Duim.logging.watchdog.timer=5000-Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp-Dweblogic.management.discover.retries=6-DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig-Dsun.lang.ClassLoader.allowArraySyntax=true - XX : - UseSSE42Intrinsics - DUSE_JAAS = faux - Djps.policystore.hybrid.mode=false-Djps.combiner.optimize.lazyeval=true-Djps.combiner.optimize=true-Djps.authz=ACC - Xverify : aucun-da-Dplatform.home=D:\fmwps6\WLSERV~1.3-Dwls.home=D:\fmwps6\WLSERV~1.3\server-Dweblogic.home=D:\fmwps6\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=D:\fmwps6\ORACLE~1-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~ 1.93\DEFAUL ~ 1- Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=D:\fmwps6\ JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\ tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server

  Listening to dt_socket to address transport: 49879

  The debugger is connected to the local process.

  < 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 16 August 2013 19:19:44 IST > < Info > < WebLogicServer > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 20, 51 - b02 Sun Microsystems Inc. >

  < 16 August 2013 19:19:44 IST > < Info > < management > < BEA-141107 > < Version: WebLogic Server temporary fix for BUG13114768 Sat Jan 21 16:14:44 IST 2012

  WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >

  < 16 August 2013 19:19:47 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 16 August 2013 19:19:47 IST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >

  < 16 August 2013 19:19:47 IST > < opinion > < Log Management > < BEA-170019 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >

  < 16 August 2013 19:19:56 IST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log. >

  August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info

  INFO: Sent Notification of mapping object config reloaded

  August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info

  INFO: Sent Notification of mapping object config reloaded

  < 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 16 August 2013 19:20:20 IST > < WARNING > < JDBC > < BEA-001552 > < data source for logging last resource (LLR) InventoryTxDataSource does not work when it is a participant in a global transaction that spans several WebLogic Server instances because JDBC remote support is disabled. LLR will work in one configurations. >

  < 16 August 2013 19:20:22 IST > < WARNING > < JDBC > < BEA-001110 > < no table test didn't put in place for the pool "SDM-commsRepository" Connections will be tested. >

  < 16 August 2013 19:20:39 IST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 16 August 2013 19:20:58 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the application UIMCMWSAdapter is not versioned. >

  < 16 August 2013 19:21:11 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the oracle.communications.inventory application is not versioned. >

  < TableBuilder > < _buildSchema > metric "webcache:request_filter_denied_stats" table has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Information ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Performance ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Response ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Servlet_Response ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Remote_Bridge_Elements ' has no key column.  It will not be seen.

  < ConfigurationUtil > < getProperties > was not able to load runtime - poms.properties

  < 16 August 2013 19:21:52 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login www.terracotta.org/80 now.

  java.net.UnknownHostException: www-proxy.idc.oracle.com

  at java.net.Inet6AddressImpl.lookupAllHostAddr (Native Method)

  in java.net.InetAddress$ 1.lookupAllHostAddr(InetAddress.java:876)

  at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)

  at java.net.InetAddress.getAllByName0(InetAddress.java:1180)

  at java.net.InetAddress.getAllByName(InetAddress.java:1110)

  Truncated. check the log file full stacktrace

  >

  < 16 August 2013 19:21:53 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login svn.terracotta.org/80 now.

  java.net.UnknownHostException: www-proxy.idc.oracle.com

  at java.net.InetAddress.getAllByName0(InetAddress.java:1184)

  at java.net.InetAddress.getAllByName(InetAddress.java:1110)

  at java.net.InetAddress.getAllByName(InetAddress.java:1046)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)

  Truncated. check the log file full stacktrace

  >

  < LoggerHelper > < Journal > cannot map non-serializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.

  < AdfDiagnosticsJarsVersionDumpImpl > < dumpVersionInfo > version jars discharge path: D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv

  < FeatureUtils > < _resolveFeatures > Ignoring feature-dependency on the function "AdfDvtCommon".  There is no such feature.

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 223

  < 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >

  < 16 August 2013 19:22:08 IST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 16 August 2013 19:22:09 IST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 14.96.8.250:7101 for iiop, t3, ldap, snmp, http protocols. >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  But it does not list the server while deploying the application.

  I don't see the problem to my office network. But I have this problem when I work from my home.

  Ideally, it should show the following lines after the server is started:

  DefaultServer startup time: 195467 ms.

  DefaultServer began.

  This is not the case if I start the server without network.

  How can I solve this problem?

  Thank you

  Ravi

  I see some message on a proxy. Have you checked that you can use the proxy on your network?

  If this isn't the case, you must disable the proxy.

  Timo

• Impossible to downgrade Satellite L305-S5957 for XP with integrated SATA drivers

  Hey everybody. You just bought a L305-S5957 today with preinstalled Vista. I tried to install it on XP with the drivers slipstreamed SATA, but it doesn't seem to work. I always get a BSOD after everything loads.

  I am trying to install the version of XP is Chinese simplified XP with SP3. I tried to "slipstreaming" twice using two different SATA drivers with nLite: v8.9.1023 (last ones on the Intel site) & v8.0.0.1039 (those available on the Toshiba site for my model). Both times by selecting the appropriate chipset (ICH8-M & variants) for integration.

  However, two SATA drivers not and don't seem to not work. What happened after that pilots of trying to load during the installation of XP, I get a BSOD. The BSOD reads: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000). It seems to be the typical BSOD due to the failure to load the SATA drivers for AHCI mode.

  So, what suggestions guys do you have? Should I eventually use "(IDE) compatibility" mode in the BIOS instead of AHCI?

  I really have no idea why it does not work. Many models in the past, I have integrated SATA drivers successfully. It gives me a hard time.

  Thank you.

  Hello

  I guess you used the Toshiba page for download.
  I took a look on the US page and found the Intel Robson Technology Driver for Windows XP (v8.0.0.1039, 31/10/2008; 22 M) and the installation tool XP F6 ACHI (v8.0.0.1039, 2008-10-31, 230 K)

  What have you tried?

  As I know that Intel Robson is a complete package that contains the SATA drivers as well but the F6 ACHI XP installation tool should contain the same files.

  However, you should compare the files in both packages!

  Usually the installation of Win XP using settings AHCI and SATA drivers should always work but of course, you could install Win XP using compatibility mode without the integration of the SATA driver.

  PS: maybe you can try to install Win XP in compatible mode. Then after installing XP, try to install the package Intel Robson and opt for the AHCI mode after that I have not very good if it will work but it s m worth a try!

• Bug Bluetooth VOIP with helmet

  Hello

  Today I bought a Bluetooth dongle 2.0 mline BDU (www.mline.at), (0 150 M of distance)
  Who has the Version 4 with the CD, this version didn't work with my helmet, so I found
  Version 5.10 of Toshiba.
  I could talk with Skype, but with other software like X-Lite, I must stop the VOIP Plugin with uses
  Wave (voice). Then I had to start the connection from the Bluetooth settings Center.
  In the software I had to then change the wave of Bluetooth (voice) at the wave of Bluetooth.

  With these settings, I could just hear and speak

  My helmet is defined a Freehand (Freisprechgerat)

  Is it possible that I can connect with wave immediately when I start to connect headset?
  Or do I have to install headset instead of hands?
  Freehand also has been reading and recording was purchased blank at the beginning

  The remote works fine, except this little bug ;-)

  Is already known?

  Thx to come of the Austria

  By the way how can I see if I run evulation?

  Hello

  May I ask why you n contact t manufacturing of headphones for more details?
  Usually they should learn more about the specific products

  It seems that the Bluetooth connection works very well and you manage to pair the Bluetooth dongle with laptop.
  So it s certainly nothing wrong with the unit of Toshiba.

  So, as stated above, seek support from "mline" for any other advice.

  Good luck

• Fitting with integral functions

  Hello

  I try to fit the data with full functions.  It is impossible to obtain analytical solutions of the integrations.

  Integration is integral [(T - abs [x]) f (x) dx, T, - T]

  Here, f (x) is one of the functions of autocorrelation for different model systems.

  Thank you

  Doogie

  Hi Doogie,

  We certainly have the integration and curve build VIs in LabVIEW. For example, you can find several kinds of system integrators in the mathematics > integration & differentiation palette. Also, if you use our design Simulation tools by & control, that built the integration as well. However, because you are dealing with an equation as opposed to sampled signals, I'd start by programming your equation in LabVIEW. Take a look at this forum thread that discusses this, and examples of code.

  Once you have programmed the equation and can generate an array of points for your stove, you might try to enter a function of integration as the "Integrate x (t) .vi" and then use a function as the "general polynomial Fit.vi" curve to generate an equation fitting for him. I would try getting started in this way. Please let me know if I address not the functionality that you are interested in.

  Best regards

• Installing drivers after Windows XP reinstall on Dell Dimension 2350 with Dell resource disk

  Hi all

  Recently, I did a clean reinstall of Windows XP (home edition) on my Dell Dimension 2350. Everything went well. Now, I need to install the appropriate drivers. I have the Dell resource disk and this is where the problem starts.
  As noted elsewhere, after reinstallation of that display on the screen of the disk resource is as it is in 'Safe Mode '. I was aware of this. Therefore, the search criteria screen resources drive was a little bigger than the screen of the monitor. I managed to its size to fit the screen, but this really isn't the problem, is the following: the search criteria options I have in the dropdown menus (on screen) are the following:

  System model: all, DXC061, DXP0G1 Dimension, Dimension E521, DM061, Dimension C521, XPS710 (who, if necessary, to choose?)

  Operating system: (I think I got this one) all, Windows XP

  Topic: (maybe this one too), Dell Diagnostics, Diagnostics, drivers, Applications, utilities

  For the life of me I can't understand the correct drivers, I am to install *. Windows XP appears in the menu of the operating system. I know enough about the order of installation, but as I said, I'm a little confused on the selection of the drivers from the disc. This computer is not connected to the internet at the moment so I can't download and use any kind of pilot program. Other research have confused me more far and provided no precise answer to this problem.
  If anyone can enlighten me on the solution step by step to this (I think "Dell resource disk for Dummies"), I would be extremely grateful.

  Thank you all!

  Zlek1207
   
  * If it will help, I went in (with "Show Hidden Files" active) Device Manager and it shows (with the yellow question mark) are:
  Other devices: Ethernet Controller, multimedia Audio Controller, video controller (VGA Compatible).

    

  You need, in the order of installation:

  1. Driver Chipset
  2. Video driver (depends on what video card)
  3. Audio driver
  4. Network driver (depends on who you are)
  5. Modem driver, if you are using a modem

  Go to the Support page and put in your Service tag. He expected to give you the drivers you need. You can download them to any PC and copy it to a USB key for installation on 2350.

  You only need applications, if you actually use them (for example, Roxio, Jasc Paintshop, etc.).

  Then install your antiviral software and get in line on the Microsoft Update site for all patches and updates.

  Please keep in mind that XP is no longer supported by Microsoft, and they stopped release of the security fixes for XP and IE9, more than 1 year. So they're all two full of security holes and put your data personal in danger.

  UNDER THE DIRECTION

• Upgrade to Windows 10 with integrated graphics

  I have received the notification Windows 10, but could not be updated because the integrated graphic card Nvidia was not compatible.

  I installed a dedicated graphics, which is compatible W10.

  I'm still able to level as W10 is still saying that the 'old' graphics card is not compatible, even if it is now disabled.

  I also tried upgradinging via the media tool.

  Can anyone help?

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  You can install the same driver in compatibility mode for an earlier version of Windows and check.

  Here's how:

  a. do the driver installation file right click and select Properties and then tap or click on the compatibility tab.

  b. check in the run this program in compatibility mode for: box.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  d. try to install the driver and verify.

  You can check: make the programs more compatible with this version of Windows

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.