Unable to deploy VIO 1.0.1 with integration of NSX
Hello
Whenever I try to deploy VIO with integration of NSX I stuck on step "Configure network neutrons.
Drop-down menu dashboard Cluster does contain all the options and so I can't go ahead with the deployment. (DVS works very well)
Like that a deployment of POC, I use the same cluster management nodes, NSX Edge nodes and users of virtual machines.
According to the documentation that the configuration is supported, even it is not recommended.
Thank you
Max
Not sure if this is the cause of your problem. But the Mgmt and edge VM can be in the same cluster. However the tenant virtual machines must be on a separate cluster. There are therefore at least 2 groups.
Arvind
Tags: VMware
Similar Questions
-
grant the role of service to service user service tenant: failed when you try to deploy VIO
Hello
I have problems when you try to deploy VIO with integration of ads. I am able to successfully deploy Violence without AD as an authentication source. However, when I try to deploy VIO with AD as the source of authentication right about 85%, I get an error in the /var/log/jarvis/ansible.log:
> > 2016-04-14 17:29:11, 597 p = 354 u = jarvis | TASK: [config-controller | create endpoint of keystone] *.
> > 2016-04-14 17:29:12, p = 354 737 u = jarvis | changed: [172.22.33.31]
> > 2016-04-14 17:29:12, 738 p = 354 u = jarvis | TASK: [config-controller | create tenant services] *.
> > 2016-04-14 17:29:13, 714 p = 354 u = jarvis | changed: [172.22.33.31]
> > 2016-04-14 17:29:13, 715 p = 354 u = jarvis | TASK: [config-controller: grant the role of service to service user tenant service] *.
> > 2016-04-14 17:29:15, 152 p = 354 u = jarvis | has failed: [172.22.33.31] = > {'impossible': true}
> > 2016-04-14 17:29:15, 153 p = 354 u = jarvis | MSG: exception: name
> > 2016-04-14 17:29:15, 154 p = 354 u = jarvis | FATAL: all hosts have already failed - abandonment
I tried Googling this error and was brought to this thread: problem of Installation of VIO - status: Bootstrap failed controller node but he is actually getting an LDAP error that I'm not.
This thread suggest you check the log of the key, but there is not keystone on my VIO Device directory:
> > root@localhost:~# ls/var/log/keystone
> > ls: cannot access/var/log/keystone: no such file or directory
So I'm puzzled.
This ended up being a bad configuration of the options of the AD.
-
Unable to deploy model NSX 6.1.0
Hello
I'm trying to deploy VMware-NSX-Manager - 6.1.0 - 2107742.ova model via customer web and vSphere vCenter.
But im unable to deploy while 80%, it shows the error message:
"Impossible to deploy.
"" Could not deploy OVF package: the request has been aborted: the request was canceled. ' " »
I downloaded the file my NSX training portal OVF template.
Kindly help me on this!
Hello
Your EGGS could be damaged during the download. Try to test it with 7 - Zip or another program zip (a .ova is actually a zip file), verify the signature of the downloaded file's md5 or just download it again.
-
Unable to draw the table 1 d with a cluster of 2 items on a XY Chart
I am unable to draw a table 1 d with a cluster of 2 items on a XY Chart. The data displayed at the entrance in the graph, but nothing is drawn. I'm trying to draw a line connecting each point generated.
You need a registry change on the inside of loops as well.
But beyond that, you create too complicated a structure. You create several plots of 1 point and not a single multipoint parcel.
See attachment for the change that works.
-
I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it? How can I fix this problem? It worked absolutely fine before the update.
Contact your cellular provider or Samsung with this problem.
-
Original title: connection problem
I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.
The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.
Hello
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.
I would be grateful if you could help me with more information:
1. Since when you are facing this problem?
2. What is the exact error you receive by accessing the computer?
I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:
Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
For more information, you can consult the Microsoft article.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
Unable to deploy device applications examples
I'm unable to deploy any of the samples from samples waterfall waterfall on my device. I get the following error when I try
There is no program file
/Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found
/Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found
/Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not foundFeature: Dev Alpha B OS Version: 10.1.0.1720
QNX Momentics® IDE for BlackBerry® 10 native SDK
Version: 10.2.0
Build id: v201306031341
You probably imported the project. I just checked myself and starshipsettings working on my bbndk Dev Alpha C. last 10.2.
File-> import-> General-> existing projects into workspace and you need to select the directory or the zip file.
After that I just checked the build configuration - debugging the device, he built and ran it on the device.
If you still have questions download the example directly from github: https://github.com/blackberry/Cascades-Samples - maybe you have the old version.
-
planning a deployment on a large scale with flash media server 3
Hi all
I am looking to get hold of the white paper entitled "planning a deployment on a large scale with flash media server 3.
Anyone have the link? I know something similar?
Andy
Hi Andy,.
This document is not yet publicly released. It will be published shortly.
Thank you
Swathi. -
Unable to deploy the application example of planning
Hi all
I'm trying to deploy the planning application model with the help of the OBE 11.1.1.3. When I click on finish, I get an error like below:
«Year error occurred while processing this page.» Check the log for details"
I checked all my services are up and actually I am not able to understand the origin of trace the error information. I checked in the logs folder, but was not helpful. Please advice how to solve this problem.Hello
If you are on windows, check if something is happening in the following paper:-\Hyperion\logs\services\HyS9Planning-sysout.log
See you soon
John
http://John-Goodwin.blogspot.com/ -
NSX environment with only a nsx controller
Is it possible to run the nsx environment with only a nsx controller?
It is not supported.
According to the installation guide: ://pubs.vmware.com/NSX-62/topic/com.vmware.nsx.install.doc/GUID-ADAED74E-4796-4826-B138-2F9EFF0AB427.html http://http
No matter the size of the NSX deployment, VMware requires that each controller NSX cluster contains three nodes of controller. Having a number different controller nodes only is not supported.
-
SDM with integrated weblogic server
I'm testing a simple application with SDM and saved searches with integrated weblogic server and the file system option. I have installed schema MDS on local DB (Oracle XE) but still not use it.
I have enabled the option "Enable user customizations" in the option display ADF in the project properties and also checked the box 'on the doctors use sessions. Also in the application properties-> run-> MDS-> I prevail on the location of the location of the file.
I have enabled security on the application and have put in place two or three users application. But when I run the application it does not show me saved searches that I set up in previous sessions. Nothing is getting stored in MDS.
Y at - it something that I'm missing... any stage?
Pointers is useful
JDev: 11.1.2.4
Thank you.
You must set the layer of customization. You must add UserCC if you want to record things for a particular user. Go to adf - config-> MDS Confriguation-> add UserCC class provided by the framework of the adf.
You must also define which component and the attributes, you must save in adf - config.xml-> view-> Tags (you must save the components) and tag attributes (attributes of the components that you want to record).
Now do not run the application, deploy the application to your built-in wls and select Basic MDS file and complete the deployment.
Thank you
-
Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?
Good evening
I have a toshiba qosmio f60, I read your answer about tv tuner.
My question is: how to set up the tv with integrated antenna tuner? Thank youThe tuner is already configured!
You must use Windows Media Center.
Here, you have to choose the tuner and need to look for available DVB - T channels.Notes; Signals DVB - T depends on the country and region.
In my area I needed an external antenna because the signal is too weak. -
Webcam with integrated microphone.
Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings pleaseto check your setting first:
Right click the speaker icon in the notification area and choose: Adjust Audio properties.
Or: Control Panel, sounds and Audio devices.
Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.
Click the performance tab and move the sliders to the complete and best, click OK.
According to the Volume of the device, click Advanced.
On the page of the Volume control, click Options in the menu, click Properties.
Mixing should be your system and not one of your pickups.
With reading selected all the check boxes.
Click record, peripheral mixing system, check all the boxes.
Click play again, and then click OK.
Volume control, "as you like it".
Vague, put the max slider.
All others are ok in the middle.
Close the Volume control.
Now we will install your micro Genius:
Click on the Audio tab:
Audio playback: System.
Sound recording: click the menu drop down and choose your Genius mic, click on apply.
Click the voice tab:
Reading of the voice commands: System.
Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK
When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.
-
HP Device Manager - unable to deploy images taken with a particular operating system to another OS
Hi all
I tried to deploy an image from a HP T5565 (Thin Client) with the operating system HP ThinPro 4, an HP T5565 with the HP ThinPro 3 operating system. Anyone know if this is possible?
I am also having the same problem when you deploy an image from a HP T610 - thin thin clent Pro 4, a HP T610 - thin Pro 3 thin client.
I take the image by right clicking on the client, by clicking on "Send the task", imagery, and then capture Image.
I deploy images in the same way, but instead select the picture in the Templates window. It works very well for Thin Clients running on the same OS.
I would be grateful for any assistance with this!
Kind regards
Remo
This is the version of the image I want.
So bascially your problem is: being ThinPro 3 devices ThinPro 4 different OS, you are not able to find the captured image of ThinPro 4 tab ThinPro 3 OS.
Two methods for you to Imaging cross OSes.
1. you have model result to capture the image on your DM console task
In this case, just click with the right button on the model of result and select "Copy to other OS", it should be ThinPro4 in your case, then you should be able to see and use the model on the ThinPro4 tab.
2. you have a gold statue want to deploy, but no model of result in the console HPDM.
- Locate the gold statue.
- DM console, switch to tab ThinPro 3, import the image by clicking on the "Template"-> "Import"-> "Image Files"-> "to deploy without PXE.
- Browse the file in step 1, select ThinPro3 as the OS tab and enter a model name.
- Wait to build the model on the ThinPro3 tab.
- After that these, you can use the model to upgrade unit ThinPro 3 to ThinPro4.
Just FYI, we strongly recommend to update DM agent before performing all tasks with HPDM.
-
Unable to deploy VCSA 6.0 with PSC external HA
I'm performing a test of 6.0 using 2 VCSAs vSphere deployment to connect to a pair of external load of PSC balanced behind a Citrix Netscaler appliances. I took 6 for external HA PSC vSphere deployment guide and I took the shots on both sides of at this point in the case where I needed to go back for some reason any.
I have deployed the first VCSA succeeded using the PSC VIP, but when you deploy the second VCSA it failed with an "error in executing the script of the firstboot ':
Auto deployment server vSphere configuration error: failed Service operation: {Auto deploy registry Exception {{'resolution': null, 'detail': [{'args': [' (Stderr: error: failed to add the user(waiter-ecba3290-dc17-48f2-8abc-c1b92533352d) AD to group, \n37 (dir - cli failed. "]}]}}} ["Error 1317: operation failed with error ERROR_NO_SUCH_USER (1317) \n)\n '], 'id': 'install.ciscommon.command.errinvoke', 'localized': ' (an error has occurred during the call to the external command: ' Stderr: error: failed to add the user(waiter-ecba3290-dc17-48f2-8abc-c1b92533352d) AD to group, \n37 (dir - cli failed.» {{{[{"Error 1317: operation failed with error ERROR_NO_SUCH_USER (1317) \n)\n'", "translatable": "an error has occurred during the call to the external command: '%s' (0)"}], "componentKey": null, "problemId": null}}}
When you try the deployment still once I came across the following error message:
My web searches have been unsuccessful so far, everyone has experience this problem or know why I'm having these issues?
Looks like persistence is not defined on session load balancing
Sticky session (persistence)
-----------
Click on traffic-> virtual server management
Select a virtual server
Select the method and persistence
method Set to round robin
persistence IP source and Timeout value
Make sure you add all ports in the Group of persistence
Maybe you are looking for
-
.. .on this page, nor done anything unusual. My antivirus avg picked up something two days ago and after that plushd remained calm down, come back later. Help!
-
Qosmio F10 graphics card problem
About 11 months after I bought my Qosmio the graphics card no longer works and I couldn't see anything on the screen. I contacted Toshiba and they fixed it under warranty.About 6 months later, he went again and told me that the warranty on the repair
-
Hello I would like to bind a collection of objects to my chart. The binding must be dynamic, that is, when I add an object to the collection the chart should be updated accordingly. I have attached a code example. Issues related to the:1. is it possi
-
It is an ancient game I want to play again for old times sake, but my laptop is a 64-bit that the installer says that it is not compatible with. Is there any compatibility mode setting that helps?
-
Change Windows 7 - the name of the Documents folder
In a new installation of Windows 7, I moved the documents located under 'Users' to the C: root and renamed the directory my documents. Everything seems to work perfectly, with the exception of my backup script. Studying this further, I found an int