Bug in panel size: resizes nevertheless

Similar Questions

• front panel size between decoration

  Hi all

  Does anyone know if there is a way to size, a façade based on a decoration.

  for example, I have a front apnel GUI with a flat frame decoration.

  I spent some time tweaking the front panel to show what is inside the flat frame decoration.  I go back and change some stuf and repeat these optimizations.

  It would be cool if I could just put highlight the object of decoration and tell the VI to resize based on the decoration.

  I tried this VI-> Panel-> Decos []-> Index [2]-> MasterRect to set the FP. PanelBounds.

  It is assigned the same size as decoration, but not really where the decoration, see VI attached.

  Any ideas?

  -Sean

  You must set the origin of the part of the façade as well.

  

  But as Ian said, it is probably best to design your front and your decoration so that its located at 0,0 and place in upper-left corner of the window.

• curves panel size

  Does anyone know how to resize the adjustment panel curves when called from image > adjustments > curves instead of use an adjustment layer.  I know, I know, always use an adjustment layer, but in the teaching of mounting base, it is useful to demo the possible adjustments if they are understood before embarking on the layers.  On a laptop this Panel hides almost the entire image being developed.

  Thank you

  John

  The curve dialog window is not feasible. It os 452px 656px.  Requirement of Photoshop is a 1024px by 768px screen but 800 1280px is recommended

  • 1024 x 768 display (1280 x 800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)

  So on a screen of minimum size, the curves dialog box occupies 38% of the screen.

  

• WHY do we have a % * # update every 2 weeks until persists 1 really bad bug (fonts and sizes change randomly when entering)?

  Y at - it sort of STOP TB, to send updates every two weeks (and BTW this slowed down TB / crashed more and more in the last two months) until they have fix this really irritating bug to randomly change the fonts and sizes when you write an email? Outlook does not, Apple mail, didn't do so to stop spamming and begin to address the real problems for a change!

  Nothing of the sort, overall we are very poor typists. How can I know what others are doing? I do it myself. I touch type? Not and nor do the vast majority of people. Even those who say they do.

  How can I know something about the issue? I've seen other people complain and the results are similar to the serious, where my advice. In my opinion, that most of the people with problems touch with appearance and no content is also to experience. Most are apparently not aware more you are trying to improve the appearance of your mails using the fonts and sizes the worst they look almost invariably to the purchaser who does not have the police fancy you selected.

  In my opinion, the code that goes into the composer's poor by the standards of today and the suffering of his age and bitrot. Most of it is written in C++, and most of those who work on Thunderbird are people of Javascript. I do not worship at the altar of God any Mozilla and I have few illusions. Either on the code, program or the people who use it. Or at least I like to think so.

  What I hold as a hope, it's a complete rewrite of the composer happens, or at least people who can make the scriptable code so many of these things can be upholstered.

  Your comments about Microsoft releases and past years their fixation are neither correct nor helpful. Unfortunately the back doors and new threats are discovered almost daily. The software industry overall solves the problems as soon as they can and issues a patch. Automakers weigh the cost of litigation related to failure (how can die, be injured) against the cost of a recall. Sorry, but as far as I don't like regular patching, I prefer the approach of the automotive industry.

• The new version, I installed today (25/06/13) keeps the size of the browser for some awfully big gawd Office size resizing. How can I get him to stop?

  This isn't a question to run in full screen or minimize/maximize... I resize down and throw later and it comes back as an office of great size.

  Hi Griffvan, Firefox now allows to adjust the zoom level of the page according to your settings in Windows, to better support high DPI displays. For example, if Windows is set to the font size of 125% (120 DPI), the content area will be enlarged by 25% compared to 21 of Firefox and earlier versions.

  The straight to the earlier style display line is the approach of two steps:

  Step 1: Install the extension of theme font & size changer . Why? Because disabling the scaling affects the area of chrome (menus, toolbars and tabs) as well as content.

  After restarting Firefox, click on the new 'A' icon at the right end of the navigation bar and change the size of the police from Normal to 15.

  Step 2: Change your global scaling in the topic: configuration preferences editor.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the pix and make a pause so that the list is filtered

  (3) double-click layout.css.devPixelsPerPx and change its value to 1.0 for Firefox 21 size of the fonts in the content area.

  This should take effect immediately without another.

• Panel properties resize

  In Dreamweaver CS6, the properties panel is too small and cannot be resized. I am running Windows 8.1 on a 64-bit computer with a screen placed at 1366 x 768, which is automatic for my Vizio screen. I tried to find something in the preferences (none), looking at different .xml files with DW (afraid to touch), tried to move the Panel (without change) different places and tried several previous discussions similar problems of survey (nothing fits). It appears the most in a set of Spry properties.

  I'm NOT a programmer or even much more than a beginner in DW.

  Help, please.

  

  Looks like it is pushed off the screen on the bottom.

  Click the tab properties, not the bar from the top of the Properties window, just named tab and drag it away from the bottom. Who will turn it into a floating window.

  Once again, it's a floating window, it reglisser (again of the tab) to the bottom of the screen until you see a highlight appear as part of the application. Release it and it "should" put in place at the bottom without overflow out of the screen.

  Something else to try would be to reset your workspace to the title of the window > Workspace Layout > Reset "your workspace name.

• How to get only the central panel to resize and display a scroll bar?

  I have a window (frame) that has three panels - upper, middle and lower. When the window is narrowed down, I need a scroll bar is displayed for the central panel only. If the maximum possible vertical shrinkage would be the sum of the upper and lower panels and a small amount (to display the scroll bar of the central panel). So the upper and lower panels should always be completely (height wise). Please review my code and suggest corrections. I tried the couple in different ways, but without success... The code below is my latest attempt.
  Thank you...
  

  import java.awt.*;
  import java.awt.Color.*;
  import java.awt.event.MouseEvent;
  import java.awt.event.MouseListener;
  import java.awt.event.MouseMotionListener;
  
  import javax.swing.*;
  import javax.swing.plaf.ComponentUI;
  
  public class PanelResizingA extends JPanel implements MouseListener, MouseMotionListener
  {
  
       /**
        * @param args
        */
       public static void main(String[] args)
       {
            JFrame frame = new JFrame ("All Panels");
            PanelResizingA allThreePanels = new PanelResizingA();
            JScrollPane allHorizontalScroll = new JScrollPane();
            //frame.add(allHorizontalScroll);
            allHorizontalScroll.setViewportView(allThreePanels);
            allHorizontalScroll.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
            allHorizontalScroll.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_NEVER);
            frame.getContentPane().add(allHorizontalScroll);
            frame.setVisible(true);
            frame.pack();
       }
       
       private JPanel topPanel;
       private JPanel midPanel;
       private JPanel bottomPanel;
       private JPanel allPanels;
       private JScrollPane midVerticalScroll;
       private JScrollPane allHorizontalScroll;
       private JLabel posnCheckLabel;
       private int panelWidth = 0;
       private int topPanelHt = 0;
       private int midPanelHt = 0;
       private int bottomPanelHt = 0;
       private int allPanelsHt = 0;
       private Point pointPressed;
       private Point pointReleased;
       
       public PanelResizingA()
       {
            createAllPanels();
       }
       
       private void createAllPanels()
       {
            topPanel = new JPanel();
            midPanel = new JPanel();
            bottomPanel = new JPanel();
            allPanels = new JPanel();
            posnCheckLabel = new JLabel("Label in Center");
            
            panelWidth = 300;
            topPanelHt = 150;
            midPanelHt = 200;
            bottomPanelHt = 150;
            allPanelsHt = topPanelHt + midPanelHt + bottomPanelHt;
            
            //topPanel.setMinimumSize(new Dimension(panelWidth-150, topPanelHt));
            //topPanel.setMaximumSize(new Dimension(panelWidth, topPanelHt));
            topPanel.setPreferredSize(new Dimension(panelWidth, topPanelHt));
            topPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK));
            
            midPanel.setMinimumSize(new Dimension(panelWidth-150, midPanelHt-150));
            midPanel.setMaximumSize(new Dimension(panelWidth, midPanelHt));
            midPanel.setPreferredSize(new Dimension(panelWidth, midPanelHt-3));
            midPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK));
            midPanel.setLayout(new BorderLayout());
            midPanel.add(posnCheckLabel, BorderLayout.CENTER);
            //midPanel.add(new PanelVerticalDragger(midPanel), BorderLayout.SOUTH);
            
            //bottomPanel.setMinimumSize(new Dimension(panelWidth-150, bottomPanelHt));
            //bottomPanel.setMaximumSize(new Dimension(panelWidth, bottomPanelHt));
            bottomPanel.setPreferredSize(new Dimension(panelWidth, bottomPanelHt));
            bottomPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK));
            
            allPanels.setMinimumSize(new Dimension (panelWidth-150, allPanelsHt-300));
            allPanels.setMaximumSize(new Dimension(panelWidth+25, allPanelsHt+25));
            allPanels.setPreferredSize(new Dimension(panelWidth, allPanelsHt));
            
            midVerticalScroll = new JScrollPane();
            //midPanel.add(midVerticalScroll);
            midVerticalScroll.setViewportView(midPanel);
            midVerticalScroll.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
            midVerticalScroll.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED);
  
            allPanels.setLayout(new BoxLayout(allPanels,BoxLayout.Y_AXIS));
            allPanels.add(topPanel);
            allPanels.add(midPanel);
            allPanels.add(bottomPanel);
            
            this.add(allPanels);
            addMouseListener(this);
            addMouseMotionListener(this);
       }
       private void updateCursor(boolean on)
       {
            if (on)
            {
                 setCursor(Cursor.getPredefinedCursor(Cursor.S_RESIZE_CURSOR));
            }
            else
            {
                 setCursor(null);
            }
       }
       @Override
       public void mousePressed(MouseEvent e)
       {
            pointPressed = e.getLocationOnScreen();
            updateCursor(true);
       }
  
       @Override
       public void mouseDragged(MouseEvent e)
       {
            mouseReleased(e);
            pointPressed = e.getLocationOnScreen();
       }
  
       @Override
       public void mouseReleased(MouseEvent e)
       {
            pointReleased = e.getLocationOnScreen();
            
            Dimension allPanelsPrefSize = this.allPanels.getPreferredSize();
            Dimension midPanelPrefSize = this.midPanel.getPreferredSize();
            Dimension allPanelsSize = this.allPanels.getSize();
            Dimension allPanelsMinSize = this.allPanels.getMinimumSize();
            int midPanelPrefHt = midPanelPrefSize.height;
            int midPanelPrefWidth = midPanelPrefSize.width;
            int maxHtDelta = allPanelsPrefSize.height - allPanelsMinSize.height;
            //int deltaY = pointPressed.y - pointReleased.y;
            
            Point panelLocation = this.getLocation();
            Dimension size = this.getSize();
            if (size.height < allPanelsSize.height)
            {
                 int deltaY = pointPressed.y - pointReleased.y;
                 if (deltaY < maxHtDelta)
                 {
                      midPanelPrefHt = midPanelPrefHt-deltaY;
                 }
                 else {midPanelPrefHt = this.midPanel.getMinimumSize().height;}
                 this.midPanel.setPreferredSize(new Dimension(midPanelPrefWidth, midPanelPrefHt));
                 this.midVerticalScroll.setViewportView(this.midPanel);
                 allPanels.setLayout(new BoxLayout(allPanels,BoxLayout.Y_AXIS));
                 allPanels.add(topPanel);
                 allPanels.add(midVerticalScroll);
                 allPanels.add(bottomPanel);               
            }
            midVerticalScroll.revalidate();
            pointPressed = null;
            pointReleased = null;
       }
  
       @Override
       public void mouseEntered(MouseEvent e)
       {
            updateCursor(true);
       }
  
       @Override
       public void mouseExited(MouseEvent e)
       {
       }
  
       @Override
       public void mouseClicked(MouseEvent e)
       {
       }
  
       @Override
       public void mouseMoved(MouseEvent e)
       {
       }
       
       
  }

  Published by: 799076 on October 8, 2010 12:53
  
  Published by: 799076 on October 8, 2010 12:55

  If you are using a BorderLayout, then Center will develop and reduce both the need and therefore should work as you wish. For example,.

  import java.awt.BorderLayout;
  import java.awt.Dimension;
  import javax.swing.*;
  
  public class PanelResizingB extends JPanel {
     private static final Dimension PANEL_SIZE = new Dimension(300, 150);
     private String[] labelStrings = {"Top Panel", "Middle Panel", "Bottom Panel"};
  
     public PanelResizingB() {
        setLayout(new BorderLayout());
  
        JPanel[] panels = new JPanel[labelStrings.length];
        for (int i = 0; i < panels.length; i++) {
           panels[i] = new JPanel(new BorderLayout());
           panels.add(new JLabel(labelStrings[i]));panels[i].setPreferredSize(PANEL_SIZE);}
  
  add(panels[0], BorderLayout.NORTH);add(new JScrollPane(panels[1]), BorderLayout.CENTER);add(panels[2], BorderLayout.SOUTH);}
  
  private static void createAndShowUI() {JFrame frame = new JFrame("PanelResizingB");frame.getContentPane().add(new PanelResizingB());frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);frame.pack();frame.setLocationRelativeTo(null);frame.setVisible(true);}
  
  public static void main(String[] args) {java.awt.EventQueue.invokeLater(new Runnable() {public void run() {createAndShowUI();}});}} 
  

• How do not affect the two horizontal panels when resizing the browser?

  I have two horizontal panels in a canvas. When I resize the browser (IE), PanelB straddles PanelA. How can I prevent this from happening? How can I make the panels resize when the browser is resized?

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Canvas ' http://www.Adobe.com/2006/MXML "
  xmlns:controls = "org. FRB. "ATL.xxxx.UI.Controls.."
  Width = '100% '.
  Height = "100%".
  preinitialize = "PreInit () '"
  creationComplete = "init ()" >

  < mx:constraintColumns >
  < mx:ConstraintColumn id = "col1" width = "30%" / >
  < mx:ConstraintColumn id = "col2" width = "70%" / >
  < / mx:constraintColumns >
  
  < mx:constraintRows >
  < mx:ConstraintRow id = "row1" height = "25%" / >
  < mx:ConstraintRow id = "row2" height = "100%" / >
  < / mx:constraintRows >

  < mx:Panel id = "PanelA".
  Width = '100% '.
  Height = "100%".
  title = "search".
  left = "col1:0." »
  right = "col1:5."
  Top = "row1:0." »
  bottom = "row2:0." »
  Layout = "vertical" >

  < / mxPanel >

  < mx:Panel id = "PanelB".
  title = "items: {contentFoundCount.text} '"
  Width = '100% '.
  Height = "100%".
  left = "col2:5."
  right = "col2:0." ">

  
  < / mx:Panel >

  < / mx:Canvas >

  I see not the overlap, even when I resize the browser.

• ATER the MovieClip Parent child size resize?

  My main movie clip has a child clip inside. When I resize the main clip the child clip dimensions seem to stay the same. I perform a trace on the width and height of the element of the child, and no matter what I resize the main clip to the dimensions are the same as before. It is possbile to know the size of what the child is after a parent resize? Thank you

  You're scaling of the parent and if the child clip will appear larger.
  its width and height will remain the same. This is because it is of dimensions
  have not really changed, her parents have. To get the clip of the child
  * screen * use of width:

  nActualWidth = mcParent.mcChild._width/100*mcParent._xscale;

  --
  -------------------------------
  Remove "_spamkiller_" at the post office
  -------------------------------

• A control that is placed between two panels to resize them, what is it called?

  Hello

  the turn of Flex, there is this control between the tree view on the left and on the right web page. This control allows you to adjust the size of one control at the expense of the other.

  However, I'm new to Flex and I don't see any dragable control over the view of the components of my Premium Edition of Adobe Flash Builder 4.

  Can someone tell me what is this control?

  

  Thank you

  Didel

  It would be a HDividedBox in Flex.

• Cs4 vertical Configurator Panel resize limit

  Hello

  Maybe this has been mentioned before, but when I try to make a custom for photoshop Cs4, Panel

  the Group seems to have a vertical limit when resizing which is much more than what I initially created.

  For example, this one was created in 71 x 94 and cannot be resized vertically more that the screenshot.

  Anchored or not is the same

  

  I also tried other sizes for the original Panel.

  Someone has an idea?

  Thank you

  Marc

  Hello

  There is a "resize" bug in the Configurator 1.0.

  When you export a Panel and open it the first time, Panel to resize the width and height you assigned as cromaline say, after first Panel only is not resized, given that photoshop will remember last size of your Panel.

  But if you resize it in a larger size exceeds the size by default photoshop (220 * 220), when next time launch photoshop

  Photoshop will remember this size, then you can't resize it smaller.

  There is a solution

  on Windows, system go to folder C: \Documents and Settings\

  Look in the "PanelSizeStore.sol" file and delete it.

  Then restart photoshop, you can see the Panel resize to your original size.

  Kind regards

• Cannot resize the front panel

  I can't resize the front panel to a smaller window.  I put in (0,0) minimum window size, unchecked maintain proportions and to scale all objects.  I had originally put the size of the minimum window to 1012 x 616.  When I close the window property and re - open the settings still collated (0,0) while they are saved, but I am unable to reduce the size of window smaller than 1012 x 616.

  Also, there is open space on both sides in both dimensions, so I'm not running in the front panel objects.  What property/properties miss me that locks the minimum panel size?  One last thing is that I'm able to resize windows from any SubVIs I the same project and edit the minimum window size them and they respond as expected.

  Thank you

  Very strange

  comics ctrl + A, ctrl + C, ctrl + N, ctrl + E and ctrl + V solves everything.

  NOR should open with a debugger that vi... Oh where is that entry again heep peek ini thing...

  [Edit: here]

• Cannot move or resize the tablet with pen input panel

  I have a Fujitsu Q550 tablet.  Recently, tablet input panel responds more correctly.  Is no longer, I can move the Panel or resize it with the stylus.  If I connect a mouse and a keyboard to it I can move and resize the input panel by using the mouse.  I can still write in the Panel, I can just change its size or position.  How can I fix?

  I have the answer, that everyone is looking for!

  fixed it, I'm just disappointed that no admins found this first:

  http://support.Microsoft.com/kb/2984930

  Please make sure that it gets stickied as the answer.

  1.) click on "available hotfix download.

  2.) choose your operating system that is affected (7 or Vista)

  3.) enter your email which connect the https may be sent to you

  4.) click on the link in your email to download the executable file from the fix

  5.) check if you have a restore point before installing in case this does not work as expected.

  6 installation.)

  7.) restart the computer as prompted

  8.) fixed! FINALLY. :)

• PS CS6 Panel does not remember when I resize

  When I open a properties panel / adjustment layer and I develop the Panel by dragging the corner, when I close the program I have to resize the Panel the next time I used CS6

  What Panel specifically do you use? If possible, attach a screenshot of your workspace.

  From my experience, if I resize my panels then restart Photoshop, they remain the size I resized the to-to my knowledge, this is standard performance. I have just tried to recreate your issue with the addition of an adjustment of an image layer, expand the properties panel and then close Photoshop. The reopening of Photoshop, the Panel I resized fact not reset, so I don't know why yours isn't doing the same thing.

  

  You can try to reset your preferred workspace by going to window > workspace > Reset [workspace name], then by restarting Photoshop. It may seem ridiculous because resetting the workspace is your problem, but it's worth a try.

  I will continue to search to try to find an answer for you - but reset preferences usually does the trick for performace wobbly in Photoshop. And again, it could be useful to transfer your question in the forum Discussion of Photoshop.

  Good luck!

  Kendall

• PNG resize problem on front Panel (not stripped)

  I'm having a problem trying to develop custom controls and expand my GUI beyond the default options Labview.  I'm using a Visio flowchart to illustrate an industrial process.  I encountered a problem trying to add items such as indicators of tanks to the façade.  To do this, I'm importing Visio images, in photoshop and then saving them as png to maintain transparency.  The problem I have is that when I drop this file .png on the front panel and resize, Labview seems to be falling pixels and cut the edges of my image.  This seems to happen on which corner I resize the base.

  Example:

  Sample PNG bumped against a new front and then resized using the building in the container box.

  

  I have the same problems with the .gif files.  I have reviewed the various .png and .gif export options, and I don't see anything that I'm missing.  I don't have a problem with JPEG files, so it must be something related to transparency.  Is this a known problem or there at - it a labview option, I'm missing?  I am currenlty using Labview 2010 SP1.

  Given that I'm still in phase of my development of gui layout, I don't know the exact dimensions of all my items and I was hoping I'd be able to resize it as I'm going to and not to be completely locked in at custom controls.  Any idea would be appreciated.  I searched the forums, but all the questions that I could find were mostly programmatically resizing problems.

  One option, you can try exporting the EMF or WMF image. LV should be able to import that, and because it is a vector format, in my opinion, it should also resize correctly.

  Another alternative is to draw in BT itself, either decorations or control of image to draw programmatically (although you should be aware that this option can have performance issues).