HP Laserjet P2055dn (CE459A): Hp Laserjet P2055dn (CE459A) - light scratches vertical and toner outside the boundaries of certain letters

Similar Questions

• HP Color LaserJet M277dw MFP: I forgot password and admin user name

  I have a HP Color LaserJet M277dw MFP and I forgot the username admin and the password.  They were the two changed wwhen the printer was purchased. Is it possible to reset back to factory default admin/admin?

  Go to this web link, the instructions are there.

  http://ow.LY/Bbpy305fOQk

  rbogdan

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.

• Quality of rpint HP Laserjet color faded to the right of the page, toner cartridge the culprit

  Thus, a resolute quirk.

  My HP Laserjet 3800dtn produced pages in which the colors are washed out or did not go to the right margin.  Various associated software HP print diagnostic and diagnostics pages feel integrated, product pages with the same problem.  The colors on the right do not appear, but the black characters, text, graphic appears.

  At first, I thought it was the length of the USB cable, so I went to an Ethernet connection and run all the tests again and got the same results.

  So I took one of the toner cartridges and replaced by a new.  The same problem.  Then, and what a weird coincidence, I discovered that there are two somewhat 'heavy duty' springs on each side of the toner cartridge that works with the door (shadow) on the roller.   One of the springs was detached.  But it just not a not dislodge, because the position whereby the spring attached (a little nub) is broken.

  My conclusion is that the door opened only partially, and therefore the toner is never properly transferred to one side.

  Maybe I broke the node with some brutal manipulations, maybe a new one was defective, that it is I got two defective cartridges.

  However, not wanting to throw a + $100 cartridge, I stuck the spring and post and allowed him to dry overnight.

  Reinserted the fixed cartridge and everything of fine.

  Just sharing.

  An update more.

  Among the repaired 'bumps' failed.

  So I heated a thin nail, and he passed through the plastic in the area where the 'essential' existed.

  The, using fine wires, I threaded the wire through the hole of very small diameter and attached to spring for the plastic.

  Yes, success... another cartridge saved from an ignominious early elimination.

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• HP LaserJet M13191 MFP: must run 'Print and scan doctor' whenever I need to print

  Whenever I need to print, the print job gets held in place in the queue...

  • 'Use printer offline' flashes
  • Status: "error - printing".
  • Port USB001

  After execution of HP print and Scan doctor, the print queue is cleared, I print the document again and it will work only once.  Next time I want to print, I have to restart the HP print and scan doctor, and then reprint the document.

  I'd appreciate any help/advice.

  Hey @everbloom2,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the printing of your Windows 7 PC to your printer Laserjet M1319. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected via USB cable to your PC, delete.
  2. Click on start and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Click Start, in your type of Services Research and open Component Services.
  7. On the left, click Services (Local).
  8. On the right, do a right-click on print spooler.
  9. Click on stop.
  10. Open your drive C:\, Windows, System 32, coil, and printers.
  11. Delete everything in this folder.
  12. Return to the Component Services window.
  13. Right-click on print spooler.
  14. Click Start.
  15. If you removed the USB cable, connect. If this is not the case, go back to the devices and printers and click Add printer to add a new queue for your printer.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• 5520 Photosmart, Laserjet 252dw: copy with separate scanner and printer

  I have a Photosmart all-in-one Scanner/printer and a new printer Laserjet. I am very satisfied (also pictured) quality of the laser printer, but I didn't buy an all-in-one again. So my question is, if it is somehow possible to copy of the Photosmart directly to the Laserjet Printer?

  Thanks in advance

  Hi @egau,

  Welcome to the HP Support forum.

  I understand that you have a HP Photosmart e-all-in-one 5520, printer and a printer HP Color LaserJet Pro M252 and want to send copies of the 5520 directly to the Laserjet Printer. I would like to help with that.

  There is no way to copy directly from the 5520 to the Laserjet Printer because they have no way to communicate with each other. What you need to do is scan the 5520 to your computer, and then send the scanned file to print the Laserjet Printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Hello Sir,

  I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.

  Thank you

  Alex

  You can download the software here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435683&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3435682&TaskID=135

• What causes a Color LaserJet 3525 print only Extensible task and nothing else?

  I enclose a printed copy of what should be a configuration of a Color LaserJet 3525 page. As you can see, there is no text of any kind printed but only finger stretch marks. I am also attaching one of the pages of the diagnostics output. As you can see, only magenta print whatever it is readable.

  The printer went out of warranty two years ago, but worked well so far.

  You problems with the black and yellow toners or problem with the scanner to the laser/for these colors. The easy way to test is to go to the diagnostics on the printer menu and choose the item disable check cartridge. When the printer says ready, diagnostic mode, open the front cover and do switch the magenta toner in the black slot and in the yellow slot cyan toner and toner Black, then put in the slot of magenta and yellow toner in the cyan slot. Now try and print a page of Setup again and post the results. If you now get a magenta print which is good, which would indicate that the black toner, and I think that the yellow toner are bad. If still the same problem I think you meet / scanner laser or high-voltage issues. You can also do engine test again to see what lines appear on the page. Keep in mind that the person above you wanted the diagnostic with the installed trainer test.

• M177fw MFP: Color Laserjet MFP M177fw Pro do not leave the page logo star HP & energy and go to the home page

  I have a HP Color Laserjet Pro M177fw MFP multifunction printer.  When I power on, I get the HP & Energy Star logos on the touch screen of the printer, but then it crashes and the screen lights up.  My MacBook Pro will see the printer (I'm wired to it via a USB cable) and it will start to print, but crashes at halfway trhrough sending data from the computer to the printer.  Is there a way to reset the printer to its default settings (first anniversary)?

  Hi Audiomic,

  I can provide some measures that could help solve the problem.

  1. try to reset the printer. Powered on, unplug the power cord from the back of the printer, then wait 60 seconds. Reconnect the power cord to the printer and turn it back on the power. Wait for the printer to initialize.

  2. If the problem persists, try to download and install the latest version of the software package. The most recent update is 20160525.  You can find the update here. Click Download and follow the instructions to install the update via the USB port.

  3. If the update does not work, I recommend this HP forum thread going and asking that the support agent send you instructions to perform a NVRAM reset.

  This last step is the only way I know to do a factory reset if the screen is frozen.

• HP Laserjet 2100: Extra printing appears on the left and right of the page

  When I print a document, my Laserjet 2100 prints the information in the document on the left and right sides of pages like a shadow all the way to the bottom of the page. I tried to use the function of cleaning the printer and evolution on the toner cartridge.  Is there anything else I can do?

  Hello

  Honestly if the cleaning page does not work, it is time to start thinking in a replacement fuser.

• LaserJet: Can I force a newer printer to imitate the old Laserjet model?

  Try to replace the printer on an instrument of laboratory a few years to find the compatible template.

  Printer provided originally is Laserjet 1100.

  The system works very well with the Laserjet 1100, I believe with 1320 and other series of 1000, but NOT with the LaserJet 2000 or later.

  Is it possible to force a newer printer (for example P2035) to "pretend" that it's the 1100 model?

  The 1100 uses only PCL5e; the P2035 has PCL5e as one of its languages, but still does not print correctly.

  I believe that the instrument asks the printer port & request "who's there?" and adjusts its output according to the response of the printer; seems he misunderstands P2035 response and other models I've tried like P2014.

  No, I can't change the behavior of the instrument or the exit without a VERY expensive change.

  Centronics parallel connection, I believe that a parallel-USB adapter would not help.

  Test options are very limited due to the location of the instrument in a biological laboratory; If something is happening here that it can exit only by autoclave!

  Any ideas out there?

  Frankly I recommend you buy a LaserJet P3015, then go online and buy a parallel EIO port, they are cheap on ebay.

  HP EIO parallel port is supported in the P3015, but this just printer model is no longer supported, but it is still available if you go out and get a fairly quicklvy.

  Your other option is simply to find a used LaserJet 4000, 4100, or 42 X 0 printer, these models all have a built-in parallel port.

  I just discovered the P3015 be be abandoned to randomly talk to someone in sales to the company that I work.

  Due to another scenario, I checked the parallel EIO port that made HP is compatible with the P3015.

  The parallel port also work in HP P4015, but HP does not guarantee that it does, I saw it work properly from any PC in this way however external Jetdirects will have problems with it. I do not know how he would react on your lab equipment, that's why I recommend the P3015 which you can always buy new with a warranty.

  If my post decided and your problem please mark as a solution. You can thank all tech for a good post giving him a helping hand to the top just click the button below the post.

• Where can I find the drivers and software for the LaserJet Pro M1132 MFP on Mac OS Mountain Lion?

  Hello

  According to http://support.hp.com/us-en/document/c01664444 it doesn't seem to be a software and drivers for the LaserJet Pro M1132 MFP.

  When will they be available?

  I read in http://support.hp.com/us-en/document/c03427752 that "today, a solution for your printer is not available for the Mountain Lion. However, an update of the driver will be available in fall 2012 . "Since it's already winter 2012, a solution will be available before January 2013?

  Thank you.

  Hi Chun Pong,

  Seems to download the software I mentioned before has been deleted. This means that a new driver will be downloaded.

  Please visit the site from time to time if a new software is available. I'll keep an eye as well and provide an update here, if the new software can be downloaded. It may take a few days.