[Bug] None of the authorized zeros label selector case hex radix

Similar Questions

• Why the label selector turns red when I try to change it?

  I need 6 cases in the structure of the case. When I try to change the True label by default to zero, I see that it turns red. Why is this? and how to prevent that?

  .. where you created it and the type of default selector is the Boolean. As Dennis said wire a certain number to him and all will be well with the world.

  If you have many cases, do you know how to define ranges in the labels? Which can be very useful.

  Mike...

• Is there a bug in shuffle the songs? iOS 10.0.1

  Love that I can remove (delete) the next song in shuffle mode, but the songs I delete seem to reappear after a song or two were played. The first person I delete is skipped, but suddenly are playing songs that I know that I removed.

  Is there a setting that I forgot, or is this one bug others have as well?

  

  I also have this problem.

  I get the following (to allow anyone to follow the bug):

  When the music plays.

  -Delete a song at random from the following list of top.

  -A this time the song removed disappears and won't play in principle.

  -When the current song ends and move on to the next, then the deleted song reappears in its original position.

  This happens with any combination: the random mode, non-aleatoire mode, playing a playlist or songs in the phone.

  So, there seems to be a clear bug in the new music app.

• iTunes 12.4.1.6 and other recent versions not showing audio books in the tab of the authors.

  iTunes 12.4.1.6 and recent versions shows no audio books in the tab of the authors. He is used to. This change means that the only way to display the audio books via a massive list or a grid, which, if you have a large collection of audio books is a pain. Is this a bug? Is there a solution? Or is it a permanent loss of capacity.

  Apple has indicated that you are not satisfied with this change.

  http://www.Apple.com/feedback/

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• author not changed in case the other copy original as comment user base

  We have created a document and added comments in Adobe Acrobat Standard DC and submitted to client, which added some additional comments by copying the original comments made by us.

  In doing so the author is not changed to the person who copied the comment, but in reality the original author is preserved.

  This behavior is expected like that?

  Well, don't see your expectations to match those of the developers and other users.

  You can submit a feature request of him have changed, however: feature request/Bug Report Form

• ESXi6 - VM stun all by extending the eager zero thickness disc

  Hello

  There is a bug in ESXi6.0 which causes stunning virtual machine during the extension of thick disk of eager.

  As in below link, I tried to convert the disc zero lazy before its extension.

  VMware KB: Expand a virtual disk eager-zero causes stun of the virtual machine in ESXi 6.0 GA / 6.0 U1

  But even after svmotion with conversion from one disk to zero lazy, he showed thick zero in vCenter, web client and command line. I then extend a 50 GB to 100 GB drive, which causes my VM to stun.

  Is there any other solution to extend a thick eager zero disk without causing a virtual machine for stunning in ESXi6?

  It is confirmed with VMware that eager thick conversion of zero-for-zero lazy question in ESXi 6.0U1a and is resolved in the update 1 b.

  The solution of the issue is:

  • Eager thick SVMotion zero disc to any other data store and change the type to thin over the svmotion.
  • Make sure the type is thin
  • Now extend a drive
  • Once again, svmotion the disc to the original and this data store times change the thick type zero eager

  You will get the option to change the disc type in the settings advanced during the svmotion.

• How to remove the author's name and/or date of blogsite summary

  Hello

  Can someone help me please find where and how to withdraw the name of the author of the summary blogsite?

  I don't want any author's name listed, just the title linked blog and the date of publication.

  Or, is it possible to have the related title, with 50 words of the displayed article, but no name of author or creation date?

  I thank very you much in advance!

  I figured out how to remove the CSS author (.blogsitesumary duration-date {display: none}, but any attempt to change via CSS does not work.)

  For example, I can't create more space between the title and the date, or list items.

  Also, I would still add the first words of the post.

• It is not possible to program the report with a user with the role of the author.

  Hello
  
  I tried to schedule the report using weblogic user (who has the admin role) it worked perfectly. But when I try to log on by using the user (who has the role of the author) and when I try to schedule a report I get the following error. It is clustered environment.
  
  
  [nQSError: 77006] Oracle BI presentation server error: A fatal error occurred during the processing of the request. The server responded with: an authentication failure.
  Error codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
  Geographical area: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  ODBC driver returned an error (SQLDriverConnectW).
  State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 13039] The imposter does not exist in the Security Service of BI. (08004)
  
  
  
  Error codes:
  Geographical area: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  .
  Error codes: AGEGTYVF
  AgentID: / users/richard/Test Mail Report
  ... Retry Agent response content loop... Sleep for 8 seconds. [nQSError: 77006] Oracle BI presentation server error: A fatal error occurred during the processing of the request. The server responded with: an authentication failure.
  Error codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
  Geographical area: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  ODBC driver returned an error (SQLDriverConnectW).
  State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 13039] The imposter does not exist in the Security Service of BI. (08004)
  
  
  
  Error codes:
  Geographical area: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  .
  Error codes: AGEGTYVF
  AgentID: / users/richard/Test Mail Report
  ... Retry Agent response content loop... Sleep for 6 seconds. [nQSError: 77006] Oracle BI presentation server error: A fatal error occurred during the processing of the request. The server responded with: an authentication failure.
  Error codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
  Geographical area: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  ODBC driver returned an error (SQLDriverConnectW).
  State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access to the requested connection is denied.
  [nQSError: 43113] The message returned by OBIS.
  [nQSError: 13039] The imposter does not exist in the Security Service of BI. (08004)
  
  
  
  Error codes:
  Geographical area: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  .
  Error codes: AGEGTYVF
  AgentID: / users/richard/Test Mail Report
  
  Exceeded number of retries of request for the GetResponseContent method.
  
  
  
  
  
  Can someone help me with this.
  
  Thank you
  Rondo.
  
  Published by: RONDO on December 12, 2012 16:07

  Check Doc ID 1446877.1

  According to the doc Fix to apply the hotfix 13553428:

  The fix for this problem is to apply the hotfix for the following new bug.

  Bug 13553428 - QA:BLK:DELIVER Corp. OID LDAP users FAILED WITH the COPYCAT DOES'NT ARE.

  Patch 13553428: QA:BLK:DELIVER users to Corp OID LDAP FAILED WITH the COPYCAT DOES'NT ARE.

  The patch is available on MOS and can be applied to all platforms.

  Or access via this link:
  https://updates.Oracle.com/Orion/services/download/p13553428_111160_Generic.zip?Aru=14732325&patch_file=p13553428_111160_Generic.zip

  Please refer to the Readme file. It is important to shut down the system before applying the patch. Then restart.
  When you restart Weblogic should automatically detect that bimiddleware.ear has changed to OH and automatically redeploy it the application

  If it helps pls mark as correct

  Published by: VIEREN Srini December 12, 2012 19:39

• Proxy sends the AUTHORITY rather than SOAP

  I'm trying to implement the SOAP over SSL communication between an AIR application and a remote server by using basic HTTP authentication. I realized that this is possible to do it via the Web service proxy. I was unable, however, to convince the proxy to talk SOAP, and AUTHORITY. Documentation on the services-config settings. XML has been a bit light and so it's hard to say how the problem can be solved. I compiled the code with Flex 3 Beta 3 and Flex 3.0.0 with the same results.
  
  After the instantiation of a WebService and configure it to use the proxy (useProxy = true), loadWSDL() causes an AMF message to send to the SOAP server as a kind of a ping. The SOAP server, of course, impossible to analyze it and returns a SOAP fault. WebService, expected AMF in response pours and produces an error, without loading the WSDL file.
  
  Here is the code used to load the WSDL file.
  
  var ws:WebService =
  new WebService ('destination.cpiapi.https',
  "https://192.168.1.123:8080/api/cpiapi.php");
  ws.useProxy = true;
  ws.loadWSDL ();
  
  Here are my services - config.Xml. I'm guessing that there is a problem of configuration somewhere here tells the proxy to talk about the AUTHORITY instead of SOAP. Note that there are references of passage to HTTP and HTTPS in this listing... using SSL was not a problem, so I went to HTTP, so I could sniff the messages without changing my BOM. Ignore this.
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = "service.cpiapi service"
  Class = "Flex.Messaging.services.http.SOAPProxyAdapter"
  messageTypes = "flex.messaging.messages.HTTPMessage, flex.messaging.messages.SOAPMessage" > "
  < id = "destination.cpiapi.https destination" >
  <>channels
  < ref = "channel.https" / channel >
  < / channels >
  Properties of <>
  < wsdl > http://192.168.1.123:8080 / cpiapi.wsdl < /wsdl & gt;
  < SOAP > http://1921.68.1.123:8080/api/cpiapi.php < /soap & gt;
  < / properties >
  < security >
  < ref = "security.authBasic security-constraint" / > "
  < / security >
  < / destination >
  < / service >
  < / services >
  <>channels
  < id = 'channel-definition channel.https'
  Class = "MX. Messaging.Channels.HTTPChannel">
  < endpoint
  "URI =' http://192.168.1.123:8080/api/cpiapi.php '
  Class = "Flex.Messaging.Endpoints.HTTPEndpoint"
  / >
  < / channel-definition >
  < / channels >
  < security >
  < id = "security.authBasic security-constraint" >
  Basic < auth-method > < / auth-method >
  < / security constraint >
  < / security >
  < / services-config >
  
  
  After compiling (SEO services-config. ("XML with the amxmlc flag '-services = services - config.xml") and the execution of the code, call loadWSDL() causes the following message to send to the endpointURI.
  
  
  [HTTP Headers deleted]
  
  "< amfx worm = '3' xmlns =" http://www.macromedia.com/2005/amfx "> "
  < body >
  < object type = "flex.messaging.messages.CommandMessage" >
  features of <>
  body < String > < / string >
  clientId < string > < / string >
  correlationId < string > < / string >
  destination < string > < / string >
  headers < string > < / string >
  messageId < string > < / string >
  operation of < String > < / string >
  < string > timestamp < / string >
  timeToLive < string > < / string >
  < / characters >
  [ ... ]
  < body / > < / amfx >
  
  As expected, the server responds with an error code SOAP and an exception is thrown when an attempt is made to decode the fault as the authority for the financial markets.
  
  
  [MessagingError message = 'invalid AMFX package. [Content must begin with a < amfx > node ']
  at mx.messaging.channels.amfx::AMFXDecoder$/decodePacket() [E:\dev\flex_3_beta3\sdk\framework s\projects\rpc\src\mx\messaging\channels\amfx\AMFXDecoder.as:155]
  at mx.messaging.channels.amfx::AMFXDecoder/decode() [E:\dev\flex_3_beta3\sdk\frameworks\proje cts\rpc\src\mx\messaging\channels\amfx\AMFXDecoder.as:97]
  at mx.messaging.channels::HTTPChannel/decodePacket() [E:\dev\flex_3_beta3\sdk\frameworks\proj ects\rpc\src\mx\messaging\channels\HTTPChannel.as:545]
  at mx.messaging.channels::HTTPChannel/pingCompleteHandler() [E:\dev\flex_3_beta3\sdk\framewor ks\projects\rpc\src\mx\messaging\channels\HTTPChannel.as:557]
  to ChannelRequestLoader / callEventCallback () [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\ src\mx\messaging\channels\HTTPChannel.as:1164]
  to ChannelRequestLoader / completeHandler ([E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\sr c\mx\messaging\channels\HTTPChannel.as:1200])
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/onComplete()
  
  
  
  
  So, my question is, why the proxy talking AMF? When I set useProxy = false, no the AMF message is sent, and SOAP communication goes very well until I have ever setCredentials(user,pass) on the WebService (whith throws a fault, saying me that I need useProxy). Y at - it a config within the services-config. XML which tell HTTPChannel not to send a ping from the AMF?
  

  Thanks for the reply. I thought incorrectly that the proxy was an integrated/transparent entity in the AIR motor. I put endpoint URI must be the webservice, not the URI of a sort of proxy of the AMF.

  My original goal was to be able to define authentication HTTP headers, as in "Authentication: Basic...". I'd be a bad engineer if I set up a proxy just so that I could use AbstractWebService.set [Remote] Credentials (). My first attempt to do not use a proxy has been to:

  var ws:WebService = new WebService();
  ws.useProxy = false;
  WS.wsdl = «...» » ;
  ws.endpointURI = «...» » ;
  var header: URLRequestHeader =
  New URLRequestHeader ("authentication", "Basic...");
  ws.httpHeaders = header;

  However, the header was ignored. The documentation available for me is not a lot to tell me that if httpHeaders:Object wanted a URLRequestHeader or only a string or only an object of the name pair: value... None of them seem to make a difference. Is the httpHeaders parameter used only in the useProxy = true parameter?

  Thanks again for the help. Any help most to push me in the right direction toward making communication HTTP authenticated SOAP would be greatly appreciated.

• How can I send email to a list so that each recipient sees their own name, but none of the others in the list?

  I know how to use the BCC field so that the recipients do not see THE names, but I wish that each recipient to see their own name, but none of the others. Is this possible?

  I think you have to use mail merge.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/mail-merge/

  There, I discovered recently, a list address syntax to be used in the address line, which could be useful for you, but unfortunately Thunderbird does not support.

• There is no indication in the authors section

  I have the version 12.4 of the ITunes software and run it on a pc win10.

  My books appear in "audio books", but the "books" tab and the "authors" tab have nothing in them.

  All I see is a message telling me books appear there and a link to the iTunes store.

  All of my audio books are of audible.com. No iTunes.

  I really want to "authors" view return and he has disappeared for me since the 12 version came out.

  Any suggestions?

  Both the books and the authors sections ignore audio books and PDF files and display only iBooks. Audio books and PDF files have their separate sections, but nothing equivalent to the view of the authors. Use iTunes Feedback to tell Apple what you want.

  TT2

• This is a new version of TB I installed on a new PC. None of the contacts from my old version or old PC appear in this version on this PC. Can you help me?

  I had a windows XP PC, and he died. I've yet to try recover data from the hard drive. I bought a new Summit of desktop running windows 8.1. I installed the latest version of Thunderbird. None of the contacts or the data from my old system is coming in the new version, that I work with. Am I just something wrong or is not in the right place. Can you help and advise?

  Thank you

  Lucien Dean

  Thunderbird stores its data on your local drive. You said it's dead. If your data are dead with him.

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• I want to change the name that appears under 'To' and the 'author '.

  I want to change the name that appears under 'To' and the 'author '.

  No matter what particular place, or simply everywhere where you happen to be at this time?