[Bug report] Problem of GUI localization: point comma vs

Similar Questions

• Bug report - validation number in a table (comma as a decimal separator)

  Hello

  When a number is inserted with a comma as a decimal separator (my local context is Czech, but should be the same with Canadians or French https://docs.oracle.com/cd/E19455-01/806-0169/overview-9/index.html and the decimal in numeric keypad key produced by commas), comma is removed rather than get a good error message and the number is inserted in a form as there is no decimal point/comma comma at all. The built-in digital validation can be easily replaced by manual validation of PL/SQL like this

  DECLARE
    v_ret_val BOOLEAN;
    v_tmp_num NUMBER;
  BEGIN
    v_tmp_num := to_number(:num_col);
    RETURN true;
  EXCEPTION
  WHEN OTHERS THEN
    RETURN false;
  END;
  

  but it is just a workaround.

  I created a unit test to https://apex.oracle.com/pls/apex

  workspace: tests

  user: supporter

  PWD: supporter1234

  Request 63101 - tab_form_bug

  I don't want to be too greedy... But please, kindly check the dev team can someone also it I reported it here Re: point Blob problem encoding?

  Thank you very much

  Pavel

  Hi Pavel,

  If you leave the main language of your application, the English value, comma is correctly interpreted as thousands separator. I've updated your application and set the primary language to the Czech, and now he behaves as you would expect (see shared components, attributes of globalization). And certainly, we continue to worry about the tabular forms, they do not go far. Interactive grids provide much additional and new features that are not available with the tabular forms, tabular forms however continue to have a place in the APEX - similar to how there are cases of use for classic reports and interactive reports.

  Kind regards
  Marc

• ODAC 11.2.0.1.2 - a bug report?

  Hello
  
  I installed ODAC 11.2.0.1.2 and use it with VB.Net 2010 and Oracle 11 g R2.
  
  I have the following problem:
  I created a global temporary table in Oracle (ON COMMIT PRESERVE ROWS). I filled the table with data and I can access the data without problems using the connection in VB.Net object. So if I run a query SQL in VB.Net to SELECT FROM this table it works fine. I can get the data.
  However, if I call a stored procedure since VB.Net, in the same session and that this stored procedure contains the same SQL statement to select from the temporary table, then I get 0 records.
  For some reason, I don't see any data in the temporary table if I access it via a stored procedure.
  
  Is this a bug? If Yes, then how can I submit a bug report?
  
  Thank you
  MR. R.

  Hello

  Having a support contract is generally how you submit bugs to Oracle. However, assuming that the unit test is quite small, similar to what I have posted previously, go ahead and post it here.

  Greg

• Please report problems than 10.0 to Apple

  Use this address to report problems to Apple. Please use it if the issues are not resolved through community support site. Apple developers need to know about bugs, so they can fix it in the updates.

  http://www.Apple.com/feedback/

  Strange you didn't solve any problems of iOS 10.0.1. You have encountered a problem? It could be that he is not really a bug, in the true sense of the word.

• Printing of text selected cultures, one part of the first line - bug report 696566 - any input help or workarounds?

  Previous reports of this problem in this forum have had their closed discussions. It is still a bug in FF 17.0.1, and has a 696566 bug report. One suggested solution of definition of impression to 90% scale has no effect.

  Printing bug has now been fixed.

  change Some printing bugs have been fixed including some pdf issues and bug 684622
  

  Hope that your problems will be resolved in Firefox 21.
  Who will now average using night http://nightly.mozilla.org/

• Apple does not not in the bug report

  I have an open with Apple (number 23682041) bug report (subject of a problem with worms backward compatibility of the isochronous USB asynchronous in El Capitan).

  I posted about 1 month ago. Apple never responded to it somehow.

  There are other people here who have had this experience? Has been the bug picked up by Apple after 1 month?

  They will not contact you unless they need additional information. Any fix will happen simply in a later version of Mac OS X.

• Detailed information on the filing of a bug report?

  It has been suggested that I have file a bug report on the problem with an app that seems to be specific to the Moto E2.

  Before I dive, is there a description of just how a bug report should be structured, or something like that?

  I'd hate to present one that is not useful, or find myself in the middle of a deposit and find he's asking me something I can't lay my hands on, especially since I have to file the bug report using the phone itself.

  Android has a built-in bug report feature. Just follow these steps to use it.

  1 activate the developer options by going to settings / phone connection and press the version number several times until it says "you are now a developer."

  2. go to settings / Developer options and turn on USB debugging. You should see a prompt with more information. on the USB debugging.

  3. Select 'Take bug' at the top of the developer options. The phone will vibrate once when you select 'Report' and it will take a minute or two to complete. The phone vibrates twice as much when it's done and you will see a notification icon.

  4. Select what you want to do with the report in the sharing dialog box that appears.

  Looks like that it stores the output of several commands (for example, top, ps, dmesg) with various command line options in the text file. There is an option to add a bug report shortcut menu press and hold power button, which might be useful if you are testing an application and want to search the log for a specific timestamp.

  I hope this has been helpful!

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• HP LaserJet Pro M402dn: Generic AirPrint driver HP LaserJet Pro M402dn - when a dedicated driver will appear - Bug report?

  There is a bug report or request.  If I turn my HP LaserJet Pro M402dn via Airprint, I can't get a generic driver.  This means I can't print envelopes because DL size paper is not available via wildcards.  In MS Word, I see the evelope (DL is supported) where to print but prints biased mode A4.

  Will be a good pilot ever written?  After all, that this is supposed to be an AirPrint printer.  Or will be fixed this problem with 10.12 (Sierra)?

  Maybe someone could tell me how to contact someone who can tell me if my questions cannot be answered here.

  Thank you.

  Bill

  Hello

  This is now fixed.  I can sent this file you ealier discussions:

  HP-printer-essentials-SE - 4_7_0.pkg ( https://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US ).

  But I never installed it because he had a date of 2015 on this subject.  My fault, I thought he was old.  It's one thing to Apple.

  I ran that Installer and training specific to a printer appeared and now I can print envelopes on airprint.

  I know that this really has nothing to do with you, but maybe this file must be included with the routines of installation of Mac with HP Easy Start?

  Thanks again for your suggestions.

  See you soon,.

  Bill

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bug reports

  Hello.

  Y at - it somewhere we can post bug reports and see if/when that the problems corrected?

  For example why (when an application runs since Momentics) is being polluted by untold as repeated messages output console:

  libpng WARNING: Interlace handling must be enabled when using png_read_image

  which make it very difficult to see what we are really interested.

  If things like these are the problems they should be fixed and not over on the console 1000 times in a row.

  If we create those clean QtMessage as stated in the doc Manager

  http://developer.BlackBerry.com/native/documentation/Cascades/Getting_started/tools/debugging.html

  It's just things worse since many of these messages to get injected apparently of a different thread that causes the output a random mix of lines half mashed up together according to the thread that writes all the time.

  The only hack is to write your own messages on stderr (instead of stdout as stated in the doc).

  Output of debug console (minimum and sufficient) useful is a minimum requirement for effective software development

  Yes Jira.

  The best way to get there is to connect to an account of Jam and then click on the link to report incidents.

  https://developer.BlackBerry.com/bdsc/home.html

  Reports bug Momentics about or tools (i.e. no coding bugs) can be entered to Momentics itself, the report will end up in the same place in Jira, but in the Tools category.

• Transcend storage device when connected gives error "Windows has stopped this device because it has reported problems. (Code 43) »

  Original title: Windows has stopped this device because it has reported problems. (Code 43) ».

  Hi, I have a storage device 'Transcend', but when I connect it it gives me "Windows has stopped this device because it has reported problems. (Code 43) »

  . in the last ididnt have had problems with this unit. what I can do.

  Shirly

  Hello

  1. What is the brand and model of the device of Transcend storage?

  2. other USB devices work on your computer?

  Error code 43 indicates that one of the motors controlling the unit notified the operating system that the device failed in some way.

  Method 1:

  Step 1:

  I suggest you try plug the storage device Transcend to another computer and check if it works.

  Step 2:

  Also, try to connect the Transcend storage device on another USB port and check if it's work (which you know are working perfectly).

  Method 2:

  You can run the diagnostic Fixit tool. Check out the following link.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  You can check after uninstalling and reinstalling the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Note: the information provided in the article mentioned above are applicable to Windows 7 too.

  Method 4:

  You can try to install the latest drivers for the storage device Transcend on the manufacturing site and check if it helps. Check out the following link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = ws.10) .aspx

  It will be useful.

• Bug report: see her minimizes hidden icons whenever I try to access

  Hello

  Another bug report.
  In Windows 8, when I'm in desktop mode.  I click on the "Show Hidden Icons" in the bar tasks and area of icons appears.  When I start to move my mouse over the displayed icons, the box is quickly reduced.  Accordingly, I am not able to access the "hidden icons" box in my bar tasks.  It's very annoying that: 1) I know that this was not intended by the team of Windows 8 and I'm almost certain it's a bug and 2) the only way I can close a program for good would be to "CTRL + ALT + DELETE" to the taskbar.
  I don't know why the "Show hidden icons" checkbox keeps closing everytime I have fly over this area, but if you guys can take a look at that, I don't know that it would be useful also to thousands of other people out there.
  Thank you
  Bobby

  I just figured out how to solve this problem.  Windows 8 is automatically set to "Flight Selection glide mouse" by default.  I went to the "ease of access" settings and people with disabilities the mouse hover-selection function.

  This solved my problem.
  No bug here, sorry guys.

• BUG report: Minor stuff

  Hello

  We have just upgraded to 2015 CC CS55 11.4.9.90 and there are some im stuff stumbling on, bothers me if this is a bug.

  Also, where is the best place to post Bugs for crushing, or discussion, if it is a bug (or feature)? Request feature InD?

  My findings so far:

  1.) of these arrows works do not at all, others are very well

  

  2.) click on symbol problem Select/focus:

  As see you in a), my system selection color is orange, and if I click on the 'tT' the fontsize gets selected for a quick change. A nice feature, have always been.
  But the 'Steuerbedienfeld' b) (the InD-window-bar main, which contains the content according to information) selection there are odd.

  If I click on the "tT" - icon c) you see the fontsize gets... highlighted in gray. I guess that its not targeted by IND. The main problem: if it looks like this, you cannot change again, as you are used to each palette window. You continue to press the numbers and wonder why nothing happens.

  But d) then click in the field fontsize, the selection gets carried and is 'orange', ready for editing.

  HM, whats up with that?

  one)

  (b)

  (c)

  (d)

  3.)

  As I mentioned in another thread, some keyboard shortcuts are not usable, so you just CS55. I guess that's undocumented, but since you can always choose these combinations, I think it's not really by design.

  I wanted to use Alt + Cmd + space for a number_space. Yes, to zoom in, but if you just tap it, its quite well... in CS55. CC will yield, but does not execute the shortcut (.. .While that shift + Cmd + space is no problem for CC).

  Also, I could not use Ctrl or Cmd + Tab more. I choose, but it does not fire. Yes, its application tab, but ive changed with carabiner. Anyway: its a charm CS55 and dysfunctional in CC.

  Also, where is the best place to post Bugs for crushing, or discussion, if it is a bug (or feature)? Request feature InD?

  Here is where to report it: feature request/Bug Report Form

• bug report: warning dialog always appears on the second monitor.

  This applies to Adobe Illustrator CC 2015 (version 19.2.0). I already presented my bug report to Adobe. Here is what happens...

  Steps to reproduce the bug:

  1. cut the 'Application Framework'. Rearrange the palettes, and then create a new workspace. Quit and restart the Illustrator application.

  2. start a new document and draw something on it. Then close the document without saving it.

  3. a warning dialog expected pop up and say "blah blah blah...". If you do not save, your changes will be lost. »

  Results:

  Here is where is the bug: the pop-up warning will still appear on the second monitor, not on the main screen. This same bug also appears when the embedded image of Photoshop is changed and a popup will ask if you want to update. new pop up appears on the second monitor only rather than on the main screen. I even tried to go back to the main screen, the following warnings are always appear on the second monitor. I even changed my monitors autour by reversing the display ports and the problem persists.

  If anyone has a solution to this, would be great and I thank you ahead of time.

  Here's the dialogue windows always appear on the second monitor.

  
  

  I just upgraded to the latest version of Illustrator CC (2015.3.0 Release;) Version 20.0.0). The dialogue-box-appearing-on-secound-monitor question goes. You need to restart your Mac after installation before it takes effect.