Transcend storage device when connected gives error "Windows has stopped this device because it has reported problems. (Code 43) »

Similar Questions

• Error "Windows has stopped this device because it has reported problems (code 43)" after the computer start in low resolution and remains after the connection

  Original title:

  Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please

  Have you tried to update your BIOS? Are there updates the firmware for your video card?

• Unknown device: Windows has stopped this device because it has reported problems (Code 43).

  I have Windows 7 Ultimate. Recently an unknown device keeps popping up in the device manager every time that I start to win. It is reported the location is in the front USB hub, but I haven't changed it anything lately. The device status says "Windows has stopped this device because it has reported problems (Code 43)". I can uninstall or disable it but it will get picked up again the next time that I reboot. All other usb devices (mouse, keyboard, webcam, UPS APC, external hard drive, printer) work very well. How can I get rid of this nuisance so that it is not reappear?

  If the problem coincided with connecting the inverter APC that may indicate the problem is with the inverter.

  Somewhat similar situation discussed in the following link:

  http://www.velocityreviews.com/forums/t527369-APC-ups-USB-as-unknown-device.html

  Your situation sounds similar as "Information system" leading the 'problem of the device' has an error Code "this device is working properly" but still "unknown device".

  I would say to detach from the APC UPS of the computer and uninstall any software related.

  Restart the computer and see if the "Unknown device" problem resolves.

• State of the device, Windows stopped the device because it has reported problems (Code 43)

  A usb driver for microsoft

  Windows has stopped the device because it has reported problems (Code 43) Standard USB HOST Controller, location of port #0002 Hub_ #0005

  Right click on desktop, select Properties.  On the next page, top left click on Device Manager.

  Scroll down the page until you come to the Universal Serial Bus Controllers and double click on this.

  Uninstall ALL USB host controllers. (Remember that when you have finished the last of them, your keyboard and mouse may not work!)  Restart the PC.  Windows should then pick up the controllers & install the correct drivers.  The only time where it will not install the drivers is when the USB host controllers are physically damaged.  In this case, the fastest and cheapest method is to buy a USB PCI card which fits directly into a PCI slot on your motherboard and will come with three or four USB 2.0 ports.

• Since the update, I get a message "unable to connect". Explorer Windows has no problem connecting to ADSL. Help, please. I don't like Win Explorer! Thank you

  Help, please. I can't access the internet through my DSL since the upgrade.

  Your firewall is not recognizing the new version of Firefox. Remove Firefox from the list of allowed programs in your firewall, restart Firefox and go to any website, give Firefox the permissions he needs access to the internet.

  See: https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Windows stopped Toshiba Canvio external hard drive because it has reported problems (code 43 error)

  This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times.  Problem remains.

  Hello

  -What diagnosis made?

  One of the motors controlling the unit does not work.

  First, run the troubleshooting material the Article from Microsoft fixit.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Failure to fix, then uninstall and reinstall the device drivers.

  1. Click on Start then RUN and type Devmgmt.msc in the RUN box.
  2. Click disk drives in the list of hardware
  3. Click on the USB external hard drive with the question and click Uninstall.
  4. Once the hard drive is uninstalled, disconnect the USB cable.
  5. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  6. Search the external hard drive in Windows Explorer

  You can view the documentation for the hardware for more information about diagnosing the problem

  For reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

• W7 Dell Inspiron N5050, disorder of generic Bluetooth adapter; "Windows has stopped this device because it has reported problems (code43).

  I'm getting generic Bluetooth adapter, "Windows has stopped this device because it has reported problems (code 43)." It shows at the beginning > Device Manager > portable computer icon, like a yellow! -in the icon of the computer. I have and you use a wireless mouse and I don't know if that is considered to be "Bluetooth" or not. I don't have any other element without wire/Bluetooth that I use. I connect to wireless internet. When I delete the device, after a reboot it comes back with the same problem. Troubleshooting found nothing to help. I did a restore to windows from the hard drive partition, (turns out was unnecessary, problem turned have been bad screen I should have caught before to do reinstall). Month? After that this problem started. I mention this to try to be through details. I would like to remove the adapter - or - change something - or - what ever? to stop it. Thanks in advance.

  Thanks, I went to the start menu > type devmgmt.msc > left click on the result > right-click on Bluetooth radio > click left adapter > click on disable /OK. Restart and the warning went and did not return. It's not all "deleted", BUT if the warning is under control, be it. Out of sight now so happy, happy, it is me. Thank you

• Windows has stopped this device (USB 2.0 Flash Disk) because it has reported problems. (Code 43)

  I have USB 2.0 Flash Disk of Orchid do. This device worked perfectly until I downloaded from MS Download Center "Microsoft USB Flash Drive Manager" and tried to install this. Although the program has not installed message stating that "this program is not applicable for the Version of Windows installed on your computer", but it made my flash drive stop working after the installation fails. Now, I always get error message this device driver was not successfully installed (USB device not recognized) and your USB device has malfunctioned or Windows has stopped this device because it has reported problems (Code 43). In the Device Manager under USB controllers, the device is listed as "unknown device". I tried most of the methods described in the forum, but so far none of them has proved to be successful. I will ask members of the forum of good want to let me know if my device itself has developed some defect (hardware failure) or is - having something to do with driver has been corrupted (software compatibility problem) and if so what is the corrective treatment / necessary rectification. Furthermore, I must say here that I am running Windows 7 RC OS version on my computer. Thank you best regards &.

  Hi ALOK CHANDRA SINGH,.
  If none of these solutions will not help you check this thread.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Windows stopped bluetooth device because it has reported problems

  in my windows 7 proffessional portable bluetooth device is not working.i checked the bluetooth driver but it showing the driver is up-to-date. I also checked it the Dell Wireless 1702bluetooth v3.0 + HS property in there the general indicating that windows has stopped this device because it has reported problems (code 43). And I use kaspersky antivirus internet security

  Hello Sivan,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your computer?

  I appreciate your efforts to resolve the issue.

  This problem may occur if the peripheral equipment fails or if the device driver fails. We will work together to solve this problem.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

  Original title: Windows Update stopped working Vista Home Basic.

  HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

  Hello

  Question: Windows Update has stopped working

  1. do you get an error message when you try to update?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems with the installation of updates (Windows Vista)

  Question: display Error Code 43 adapter has stopped the unit

  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows (Fixit)

  Hope this information helps.

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• I think Windows has stopped this device because it has reported problems. (Code 43) when connecting iPod to the PC.

  Original title: Code 43 problem

  iPod is no longer detected when plugged to the USB port.  Instead, I get the following error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  Crisis averted!  On another head shot... I thought that maybe the problem could be in the sync cable since the Apple store employee had no problem with the iPod.  I bought a new cable and the computer immediately recognized my iPod.  The old cable is now in the trash.

  Thank you for your help.

  Bob

• Error: "Windows has stopped this device because it has reported problems. (Code 43)

  Original title: chip Blue tooth

  Summer just check via the Device Manager and found my 'CSR Bluetooth Chip' has a problem: "Windows has stopped this device because it has reported problems. (Code 43)' checked the update driver and it's all good, no matter what can shed light on this problem?

  Hello Brady.

  Thanks for posting your concern to Mirosoft forum, I'll certainly help you with this problem.

  You might face this problem because damaged or obsolete Bluetooth drivers. I suggest you follow the steps below and check if it helps.

  1. Did you of recent changes to the computer before this problem?
  2. When you receive this error message?
  3. Your computer will detect the Bluetooth device?

  Please follow the methods and check the status of the issue.

  Method 1: Run the diagnostic tool

  The diagnostic tool is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  Connect the devices to the computer.

  Hardware devices do not work or are not detected in Windows

  If the problem persists, follow method 2.

  Method 2: Uninstall and reinstall the Bluetooth driver.

  Follow the steps below to uninstall the Bluetooth driver.

  1. Click Start
  2. Click on Control Panel.
  3. Go to system and security.
  4. Under System , click Device Manager.
  5. You can get driver Bluetooth and expand it.
  6. Right click on the driver Bluetooth and select Uninstall.
  7. Now, restart the computer and check the status of the Bluetooth driver.

  See also:

  Code 43: Windows has stopped this device because it has reported problems

  Devices & drivers

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  Try the USB device on another computer.  If you get the same error in another computer, then the unit has probably missed and the files that it contains are lost.