Bug touchscreen Circuit?

Similar Questions

• Laptop 15-AC121DX: touchscreen works do not under Windows10

  Got this new laptop yesterday, and everything works fine apart from the touch screen, is not running when started under win10, was phone with 2 hours support, did all the tests, the display works, but finally started it does not work, has managed to find the latest drivers on the egalaxtouch site, still does not work tried later MS MS catalogue, I guess I have to wait for a update or bring her back? like the pc, fast, pleasant and 6 GB 1 TB for 399, but no touchscreen, not a matter of circuit breaker but would be nice if it works properly... and support site when I choose my model it is stuck in a loop constantly ask for the model number...

  Paul

  Try to remove grey pilots and EGalax driver, reboot and see which installs Windows 10. Should not install a non-compliant driver.

• The ubiquitous Bios password bug

  TOSHIBA: Stop making several models of defective laptop computer that randomly set a bios password on you. Of course, they offer to pay for a shop to do it, but we don't have time for that. Reviews of this question going back to nearly a decade. That being said, as a result of the business.

  I don't want to pull the cmos battery, my other computer has no floppy drive to a disk with a hex editor key, so that came out, and I don't want to short-circuit jumpers.

  WHAT IS THIS BOX FAULTY BACKDOOR PASSWORD:

  satellite 135a
  Phoenix BIOS

  Thanks for your time.

  WARNING: do not buy Toshiba products, if you do they'll think it's ok to make products with a bug in killing of long time work (buy if you work for a huge company that can afford to put your feet a week)

  Here are some of the victims, but the root cause (bios password reset bug) is not identified as the systemic problem that it is:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38071&TSTART=60
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=135528𡅨
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138028𡬬
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138032𡬰
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=129336🤸

  They got a working laptop again? No one can say.

  You are really funny to type cuban_cigar. And you are telling stories. But I want some of your stories were real and not made up from thin air.

  You posted links to the son how to get rid of the BIOS password ok that nice, but it would be nice if you had read EACH case before posting something like this. In most cases, the user has lost the password!

  I've got three different models of Toshiba laptops and set to update the BIOS on all laptops.
  Never ever had a BIOS password problem!

  I'm agree with Akuma and possibly that a single mobile model may be affected by unknown BIOS password problem.
  I noticed an assignment abut M70, but it seems that the ASP took free and new update of the BIOS should help.

  I also read in other forums that something like this happens also on mobile phones from OTHER manufacturers.
  So in your case, I would be very careful with some things that are not known to you or not really clearly for you because you confuse others here in the forum.

  Welcome them

• How can I control external devices using a stand-alone touchscreen with a LabVIEW app

  For my senior project my group design and created a vehicle for extended range hybrid with 90 Li + battery which is charged by a 15 kW generator and/or who is also charged by a 5 kW fuel cell. Currently, our system is able to measure the tension on batteries and display them on a laptop via LabVIEW. To process these data, we use a cRIO FPGA. What we would like to do now, is having a touch screen for the pilot to choose which loads of source of battery power so that monitor a pressure reading from the fuel tank.

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  Sorry for the question as much. Any help with the answer. Thank you!

  This looks like a very interesting project.  If you are interested, National Instruments organizes an contest of Design student where you can win cash or a trip to Austin for NIWeek.

  steve215 wrote:

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  NEITHER sells computers touch screen that can be used to control LabVIEW applications.  You can find more information here: HMIS and industrial touch panels and here: LabVIEW Real-time and Touch Panel Deployment and replication resources. Our computers 6-inch touchscreen , run Windows CE, programming on them is a little different from the programming on a full Windows operating system.  You can find useful getting started with LabVIEW Touch Panel Module .

  You can use third-party with the LabVIEW Touch Panel Module devices, although it takes a deployment license for it.  More information can be found in the getting started guide.

  If you were able to send the information of cRIO on a network (which according to your description, seems unlikely), you can use a smartphone to control your application.  More information on our community of Smartphone group.

  steve215 wrote:

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  If you use the 6-inch touchscreen panels, they need 18 to 32 VDC (the fuse becomes an open circuit if the input level exceeds 33 VDC).  The transfer of data from the switching relay can be monitored and changed with the touch screen.

  steve215 wrote:

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  If you have traveled the road of the touch panel, you need to purchase the LabVIEW Touch Panel Module and a touchscreen.  Touchscreens OR have a touch panel deployment license.  Guides step by step to create the stand-alone application are in the getting started with LabVIEW Touch Panel Module .

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• TC7 Bug upgrade

  Hey all,.

  There seems to be a bug with some improvements TC7.  I upgraded a C40 & EX90 were the two TC6.3 running with keys to unlocking TC6 TC7 valid I lost the following in the web interface.

  • Experimental section is missing
    • Which means that I can not remove the error message 8 Tough wrong on my C40 which has no touchscreen
  • Release key field is missing maintenance-> upgrade to the software section

  Thank you

  Justin Ferello
  Technical Support Specialist
  KBZ, a Cisco authorized dealer
  http://www.KBZ.com
  e/v: [email protected] / * /

  Experimental has been removed from the web gui, but you can stil CLI it if you wish.  If you know the name of the field, you are looking for, you can just type the search button in the GUI and it will show again.

  If you switch to TC7, RK are not mandatory for the upgrades more spent TC6.2 I think, if you have a key for TC6 +, you should be good for other upgrades, but confirm.

  VR

  P2

• Major bug Flash "delivery"!

  Several times by tapping a button will result in pimples that stay in a State of "delivery" repeatedly performing the delivery function!

  It's extremely repetitive on a touchscreen! and can be duplicated with a mouse.

  I don't know if it's a "draggout" / "delivery" program or if Flash doesn't have the windows message that a publication has taken place.

  This issue will happen no matter how you create the delivery service, you can create a button object, add the action to a clip is not serious, a t at some point, the object will be stuck in a State of delivery, which means that if you have a delivery action will continue to pull you even windows has clearly said flash there was an onrelease or ondraggout.

  I tested on 4 touch screens and 2 monitors with mouse or touch screen.

  Is there a way to get around this bug?

  Hey no problem. The points are something new with the new forums - what maybe a month now? And no one is under any obligation to assign them. But as I said, I'm such a whore for them.

  Thanks and good luck.

• macOS bug Sierra - Possible? (Terminal)

  I use the Terminal Df-h command to find the percentage of used space on the hard drive of my Mac, and I've noticed that since the upgrade to Mac OS Sierra; It came out that I used 0% (which may not be true); I was wondering could this be a bug and this is the case with anyone else?

  

  In fact, it is show you used 6% of disk space. 0 percent at the end relates the number of inodes that are used (data structures that manage the different metadata). Because you have so few files you are not yet using 1% of inodes, so he says always 0% are used.

  So, no, no bug

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• Calendar Apple App Bug frozen works only with iOS 10 update grrr

  Since I updated to iOS 10 (more more later than 10.2, etc.), everything was not too bad except THE APPLE CALENDAR app, its deiving me crazy when I click on the app it's like it freezes and past shift x 50 mode still something to do with the calendar app will cause either a frozen or a black screen or white and then crashed ack to main menu. Sometimes it will allow me to create but will be trolling with typing and finally crashed or not even save it... Please HELP I am sure what else to do, I tried to download google calendar and which seemed to have something of bug he loves too then something happens. And I tried to delete it and download it again, / force delivery, nothing has changed

  Hi there calsparks!

  Thank you for bringing your question on the calendar of freezing and trolling since the update to iOS 10 on your iPhone for Apple Support communities.  I rely on the calendar to keep my life organized, so I'm happy to help you resolve this issue today.

  Looks like you did a few good troubleshooting by force to leave the app, force to restart the iPhone and deleting and reinstalling the application calendar.  At this stage my next recommendation would be to backup your iPhone, then erase and restore your iPhone as a new device, then test calendar to see if it behaves correctly, and then restore your backup.
  

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• iPhone restore backup encryption bug in iTunes

  First the details of my system:

  El Capitan 10.11.6

  iPhone iOS 6 10.0.2

  iTunes 12.5.1.21

  Steps to reproduce:

  1 backup the by using the encrypted password (current running iOS 10) iPhone

  2. once the backup is complete change password encrypted from A to B

  3. restore the iPhone using the backup.

  The backup cannot be restored with A password or password B.

  I think that most people would say I forgot the password B. You would be a mistake. Password B was stored in my keychain and it wouldn't work. To check that I had the correct password, I downloaded a password free utility cracking. For some reason, these utilities are available for Windows only. I used the utility of tenorshare. Since I was sure I knew the password, I used boxes of prefix and suffix of the utility to verify that the password is correct. The utility shows you only the first 2 characters of your password once he finds her. Since I am sure that I knew the password, I put the first 7 characters of the password in the prefix box password and he assumes that the last of them (which I knew that). Then I put the first 6 characters of the password in the prefix area of password and the last character in the zone suffix and guess the second to the last character (which I knew that too). In both cases, he finds the password, which confirmed that all my characters were correct, but iTunes would not accept. At this point, I was convinced this is an Apple bug, so I googled some more and found this blog https://deciphertools.com/blog/ios-10-backup-password-incorrect/ which confirms:

  "If you recently changed your password backup in iTunes, and iTunes is now reports that 'the password was incorrect' when you try to restore this backup, then we may be able to help."

  There is a small problem affecting backups iOS 10 - sometimes changing password causes backup the password being rejected (both new and old passwords) when you try to use the backup that you did. »

  I was able to solve my problem of password associated with the procedure.

  My backup was too important to wait for a solution possible iTunes. Apple should recognize this problem and have a fix as soon as POSSIBLE.

• IOS 10 keyboard bug

  There is a bug at the moment where the software keyboard when my iPad Pro running the latest iOS (from today 06/10/16) displayed in the bad sense.  It happens as follows:

  I'm holding the iPad in Vertical Mode (Home button down) and I'm on the home page of apps.

  I pull down from the center of the screen to access frequently used applications.

  As soon as these applications appear that the software keyboard appears also, but in fashion landscape on the left side of the screen. It crashes me out to make a choice of app and I have to tilt the iPad to type the first letters of a couple of my app type laterally in the wrong way.

  Expected behavior: in a vertical position the keyboard should be popping up by underneath the screen, applications frequently used at the top of the screen and there is no occlusion.

  If someone has corrected it somewhere, I'm all ears, but I expect that what needs to be fixed with some magical-spackle code.

  Thank you all!

  Hello. You have restarted your iPad since the last update? Here's how

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  What you describe works normally for me on iPad Air with iOS 10.0.2, so it looks just a curiosity for you. By the way, is your Pro model 9.7 to 12.9 inches?

• Bug in iOS Schedule 10: jumps to two months

  Presently I found what seems to be a bug in iOS 10 calendar: sometimes, when choosing a certain day in the month view + list of activities below, the real selected jumps from day to another month, which is currently not displayed on the screen. Then the red circle suddenly disappeared from the current month and jump out of view to a different month (usually 1 month in the future).

  Anyone else having this problem? I use iCloud for calendar synchronization.

  I did not have this experience so far.  This - try restarting your iPhone, iPad or iPod touch - Apple Support

• Numbers 4.0 - Bug with default date when entering the time alone?

  I've just updated to 4.0 numbers after upgrade to Mac OS Sierra and met with what seems to be a bug.

  Previously when I enter a time in the format hh: mm in a cell that has the format of Date and time, it would create the date date of the day, because none has been provided explicitly. It is the behavior expected according to this support article:

  If you do not enter a date and a time, Numbers adds a default value for you. For example, if you type '13:15 ', Numbers adds today's date by default.

  What happens now in numbers 4.0 for me when I get home just a moment, is that it gives me 01/01/2016 as the date, which is a huge pain, because I rely on the fact that the date is (or should be) today's date by default when you enter data in my spreadsheet and right now that means I have to manually change each date by hand to be released today.

  All confirm that this behavior occurs in numbers 4.0 (Build 3507)?

  Thank you

  Michael

  Here is what I get here after typing 13:15 in numbers 4.0 under Sierra:

  

  I left the Format of data in automatic mode, but get the same result when the format Date and time.

  It might have something to do with your region settings in system preferences (I'm using the default values for the United States).

  Have you tried numbers, reboot and try in a document of closing costs?

  SG

• activation iPad 9.3.5 blocking bug

  Sorry if this thread in the wrong section, I can't find the section support or tag you,

  Ive updated my ipad 9.3.5 once ive power used for one day in empty battery.

  then it restarts and now im on this activation of the lock screen but my apple ID does not.

  screenshots:

  1. no language > This means I already configure it.

  

  2 NOTE: after 9.3.5 strings I could change the apple for a * s, even managed to download apps on it, then ipad ID drain its battery and restarted, it went to the lock of activation screen and does not my i.d.

  Ive tried to log a * s , but does not, so I thought he came back to the previous owners i.d.

  I heard that there is a bug like that when it updated to 9.x or older.

  a * 6 is my aunt apple id and the previous owner, we have already made contact with apple on the recovery of this apple ID (case ID: *), and we managed to get password reset e-mail. but still do not accept.

  I hope someone can help me with this, waiting for response from the apple support.

  < personal information under the direction of the host >

  MARK AS RESOLVED.

  another successful apple ID to unlocked it.

• What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  I've never heard a backup report bugs, however if you are interested in, you can always restore the device as good as new.