Laptop 15-AC121DX: touchscreen works do not under Windows10

Similar Questions

• W700 touchscreen works do not (hardware problem)

  My Tablet seems fine, but I can't use the touch screen. The first time it happened it was December 18, and has happened for windows session. It seemed to be a stroke of luck.  Then I thought it was drivers or something.  I actually did a "System Restore" to 15.  When he returned to the top it worked.  But then it happened again... after waking up the next day.  Nothing to do with updates.  Now it doesn't work at all.

  Then it dawned on me to check my Android build on the same computer.  I also have an Android-AI as well as Windows boot - 8.1.  Of course Android also does not recognize the touchscreen.  In point 8.1 of Windows, in Control Panel configuration-system it says "no net or enter key is available for this view.  So this prompted me to stop fiddling with the drivers and updates since the site of Acer, Microsoft or Intel.  It must be a hardware problem.

  I am not under warranty:

  So I jumped the open machine.  I disconnected the battery for the whole night.  In order to get that I need to unplug the screen.  I fiddled with other things in there.  I was hoping that my violin would be reset some static or something that could be causing the problem.

  In any case... I need to replace? Or what could be the cause of the problem... Or I'm just watered... Doom just buy another device?  Just use it with bluetooth or wired usb things stuff?

  Normally, if there is a problem with the hardware with the touch screen it is the cable between the scanner and the motherboard. They come sometimes loose, causing the digitizer to no longer be recognized. If you have verified that carefully, and that the cable is not cracks or breaks, so it's going to be a draw upward, or the digitizer or the motherboard. Probably it would be cheaper to replace the digitizer to test, but you take the risk that it is the motherboard instead...

• HP Pavilion 11-h010nr x 2 PC (touchscreen works do not)

  Product name: HP Pavilion 11-h010nr x 2 PC

  OS: Windows 8

  I have a HP Pavilion PC 11-h010nr x 2 for about 20 days now. I noticed that the touchscreen function does not work. I ran Diagnostics equipment for the PC HP (UEFI) tool and the touch screen worked during this period. I guess the problem must be Windows 8. Any help would be greatly appricated.

  Thank you

  Pipwax

  Thanks a lot for your offer to help, but the technicians HP suggested that I send the system for repair.

  Thanks again.

  David

• Gamepad not working do not under Vista

  My Windows Vista loaded and runs MS Combat Flight Simulator V1 OK using the keyboard, in 'settings' program, he recognizes the joystick for calibration but joystick doesn't work just not in the game itself. I tried this fix below - but no luck. Any other ideas please?

  If you upgrade to Windows Vista, one of the things that you may find is that your older programs works under Vista. Many software publishers are working to release Vista compatible versions, but in the meantime, you can try running in Compatibility Mode applications.

  To do:

  1. open Windows Explorer.
  2. Locate the executable file of the application.
  3. right click on the executable, and then click the properties option.
  4. Select the Compatibility tab.
  5. Select run this program in Compatibility Mode option.
  6. in the drop-down list, choose the operating system that you ran before upgrading to Vista.
  7. If necessary, select run the program as administrator.
  8. click on OK.

  Hello

   
   
  What is the brand and model of the gamepad?
   
   
  I suggest the following steps and check for the device.
  a. click the Start button.
  b. click Control Panel, open game controllers.
  c. click on your game controller, and then click Properties.
  d. on the Test tab, test the game controller to verify functionality.
  If this does not help, you can follow the steps in this article mentioned below:
  http://support.Microsoft.com/kb/831361
  (Valid also for all Microsoft games)
   
   
  See also:
  The problems of gamepad:
  http://support.Microsoft.com/kb/811463

• Internet wireless on the laptop works do not under Vista

  Hi guys. My laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too.  Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the internet wireless yesterday after I restarted my laptop. I know that the modem is not the problem because my brother's laptop can connect to the net to wireless. Thank you in advance.

  Hello

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

• HP Envy 13 laptop: Bluetooth doesn't work is not on the HP Envy 13 laptop

  Good afternoon

  I recently bought a laptop from HP Envy 13-d004a and could not get working Bluetooth.

  Without wireless/bluetooth adapter is an Intel Dual Band Wireless-AC 7265.

  Bluetooth is not listed in the page menu settings/Windows device.

  There is no Bluetooth device listed in Device Manager.

  There is an unknown USB device (device descriptor request failed) listed under Bus USB controllers I think it is perhaps related to the problem. The State of this poster features 43 code.

  So far, I tried to uninstall and reinstall the USB devices and update drivers for USB devices. However, the USB device is unknown, with a warning on the icon symbol.

  I also downloaded the latest Intel Bluetooth driver update utility. When I run the installer, or the repair, I get the message

  "Intel Bluetooth Service (ibtsiva.exe) could not be installed. Make sure you have sufficient privileges. ». I am connected with administrator privileges when I run the installation program.

  So far all my attempts to solve the problem of Bluetooth failed, would be more appreciated all the help I get.

  Thank you

  John

  Bluetooth problem has now been resolved on my HP Envy 13-d004na notebook.

  Tonight a Synaptics SMBus driver has been downloaded and installed via Windows Update.

  After the installation of this driver, I restarted the computer.

  After restarting Bluetooth appeared in Device Manager and peripheral USB unknown displayed previously had disappeared from the Device Manager. I tested Bluetooth connectivity and am now able to pair with my Bluetooth mouse.

  Surprised, but very happy that the problem has been resolved and that the laptop now seems to be fully functional.

  Thanks again for your help.

  John

• USB gamepad work do not under windows 7!

  I have a USB gamepad that works perfectly on Windows XP, but when I use it with Windows 7, the computer recognizes it, but under the USB Joystick properties, it doesn't detect any button I press. How can I fix?

  "I think that this problem doesn't exist on my laptop because when I plug to my laptop that is running Windows XP, I have USB device failed"

  AH ha! A different story of your title and the way in which the 1st post read.

  Go to Device Manager, while the controller is connected to a USB port
  (have btw - you tried a different port, if it is available?) and to find the name of the controller to Human Interface Devices.
  If there is a symbol such as an X or! next to the name of the controller, there is a problem. The link below gives some troubleshooting information.
  http://support.Microsoft.com/kb/133240

  If there is any indicator of problem the controller probably the proper drivers. You can try to R / clicking on the name of the device and try the update driver software option.
  If this does not help and there is no software driver for the controller that supports
  XP (WIn7 too if you want to be able to create the profiles assignment button) on the
  to MFG web site, then you can be out of luck.
  Is the controller a great name - Logitech Belkin/Razor, MS XBOX brand, etc.
  I'm not aware of controllers that will work on Win7 and does not work on XP.
  but the industry of the PC is like that, I wouldn't be surprised if some very new
  controllers are not backward compatible with XP.

  .

• Palm Pre Touchscreen works do not at all

  My touchscreen palm pre is completely insensitive... I can't do anything at all...
  things I've tried:
  -remove the battery for 1 min or more (maybe max 10 minutes)
  -tried WebOS Doctor to restore (did not work said "cannot restore")

  I'm really scared its broken for good. the last time it worked was this morning. I upgraded 1.2.1 nite last and then this morning I tried to open an application (and I did not pass the loadup screen) I hope that did nothing. then after I turned it off...  I tried to turn it on and use the touchscreen and it did not work at all. I want to know if my warranty covers replacement (I was on sprint for more than 30 days) and that so I have to pay anything. someone can give me a solution to my problem with touchscreen or should I just get a replacement

  Please contact palm tech support online at the 877-426-3777. they can help you to test your device to see if it is broken or not.

  If it's broken, then you must submit for repair. the cost of repair is free, since your unit is still under warranty of 1 year.

  You can also opt to view sprint for replacement since they changed their policy of 30 days warranty for 1 year.

• Yoga touchscreen works do not...

  Hey everybody,

  I picked up my Yoga today, and I love it. However, about an hour ago the touch screen went completely insensitive.

  The last thing I remember to do, before noticing the touch screen becomes unresponsive, was installing the Android SDK. (Well, I ran the installer, but it has not identified the JDK).

  So, here I am, with the touch screen not functional at all. Has anyone else had a similar problem? Does anyone have any suggestions? I tried the "refresh" and that did not work. I'll probably try the installation option / wipe in a bit. I guess that would tell me for some if it is a hardware problem or not.

  I really hope this isn't a design flaw with the 360 hinge causing problems. Really, I love the laptop and would not have enough to deal with hardware problems like this on the road. :/

  I will call support in the morning, I was hoping to get this resolved tonight if anyone has had a similar problem.

  Thank you!

  
  

• Hebrew language works is not under Vista.

  Original title: deleted language of vista

  I have windows vista on a computer dell laptop. I had an additional language on my computer (Hebrew) all of a sudden the Hebrew did not work.

  I tried to remove and re - install via the Control Panel, even through the toolbar, there is no language bar option.
  I tried to use ctrl + shift to switch between English and Hebrew, but it did not work (even if the Control Panel, said that the Hebrew is installed).
  What should I do?
  Thanks in advance
  Hadas

  Hi Hadas,

  Follow these steps and check if the problem persists.

  Step 1:

  I recommend you follow the steps in this link that talks about a similar problem.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-change-to-Hebrew-language-keyboard-and/108c5c1f-ad38-448D-95FC-3220d02a4139

  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• HP laptop keyboard doesn't work does not correctly

  Friends I have a hp laptop, it's keyboard does not work properly when I press 'G' slap 'C' and other buttons have the same problem.

  If anyone has a solution please answer.
  Thanks in advance

  Hello Rahul,

  Please answer the questions below to better understand the issue

  1. What is the exact make and model of the HP laptop?

  2 from when is the persistence of the question?

  3. don't you make changes to your computer before the show?

  4. have you installed all the latest drivers associated with your computer?

  In the meantime, go to the icon start, right-click > select Control Panel > (set as small icon view) > troubleshooting > material and audio > hardware and devices > click advanced options and tick the apply checkbox automatically repairs > next.

  Please get back to us with the necessary details so we can solve your problem as soon as possible.

• Previews not working do not under 10.3.1.2243?

  I was about to publish a new version of my app, when I noticed that previews are no longer works since I upgraded my Z10 10.2.1 to 10.3.1.2243. At first, I thought that I must have inadvertently turned off instant previews in my phone settings, but they continue to work properly when an email, text, or BBM comes in. I also checked the App specific notification settings and everything looks good. The notification is save in the hub and scratch the alarm, but the preview is not displayed. It worked perfectly until I upgraded my OS device.

  I'm doing something fancy in my application that allows me to build a single executable for OS 10.1 who can use the class of improved Notification of 10.2 if the application runs under 10.2 so I have to two generations. It worked fine under 10.2.1 but I was wondering if that ruse was causing my problem so I built a little app to Cascades coming fires a standard Notification 15 seconds after the start (which gives me enough time to switch to another application for the instant preview should be displayed). No matter if I have the build for Mac OS 10.2 or 10.3, in both cases the instant preview does not appear on my Z10. I can't test on a simulator since some sim versions are no notifications in the hub at all, and those that do will display previews not instant, even if the corresponding version of the ARM.

  I wonder if anyone test this for me on a device running 10.3.1.2243. Simply create a "Hello World" application standard Cascades, add the bbplatform library, and then replace the following code for the support. Set the level of the API on 10.2 to use the Notification class that is expected to review instant.

  I can't get my update until this is resolved. Thank you.

  UPDATE: I forgot to mention that you must ask permission to notice too.

  ApplicationUI.hpp

  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  
  namespace bb
  {
      namespace cascades
      {
          class LocaleHandler;
      }
  }
  
  class QTranslator;
  
  /*!
   * @brief Application UI object
   *
   * Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI();
      virtual ~ApplicationUI() {}
  private slots:
      void onSystemLanguageChanged();
      void notify();
  private:
      QTranslator* m_pTranslator;
      bb::cascades::LocaleHandler* m_pLocaleHandler;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  ApplicationUI.cpp

  #include "applicationui.hpp"
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI() :
          QObject() {
      // prepare the localization
      m_pTranslator = new QTranslator( this );
      m_pLocaleHandler = new LocaleHandler( this );
  
      bool res = QObject::connect( m_pLocaleHandler, SIGNAL( systemLanguageChanged() ), this, SLOT( onSystemLanguageChanged() ) );
      // This is only available in Debug builds
      Q_ASSERT( res );
      // Since the variable is not used in the app, this is added to avoid a
      // compiler warning
      Q_UNUSED( res );
  
      // initial load
      onSystemLanguageChanged();
  
      // Create scene document from main.qml asset, the parent is set
      // to ensure the document gets destroyed properly at shut down.
      QmlDocument *qml = QmlDocument::create( "asset:///main.qml" ).parent( this );
  
      // Create root object for the UI
      AbstractPane *root = qml->createRootObject();
  
      // Set created root object as the application scene
      Application::instance()->setScene( root );
  
      QTimer::singleShot( 15000, this, SLOT( notify() ) );
  }
  
  void ApplicationUI::onSystemLanguageChanged() {
      QCoreApplication::instance()->removeTranslator( m_pTranslator );
      // Initiate, load and install the application translation files.
      QString locale_string = QLocale().name();
      QString file_name = QString( "InstantPreviewTest_%1" ).arg( locale_string );
      if ( m_pTranslator->load( file_name, "app/native/qm" ) ) {
          QCoreApplication::instance()->installTranslator( m_pTranslator );
      }
  }
  
  void ApplicationUI::notify() {
      bb::platform::Notification* notification = new bb::platform::Notification();
      notification->setTitle("Test Notification");
      notification->setBody("This is a test notification");
  
      notification->notify();
  }
  

  You must allow instant previews with the NotificationDefaultApplicationSettings class (take a long breath).
  http://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationdefaultapplicati...

  Here is the code of a project without empty head, which includes the instant preview by default (sorry for the formatting, I'm on mobile):
  Parameters of NotificationDefaultApplicationSettings;
  settings.setPreview (NotificationPriorityPolicy::Allow);
  Settings.Apply ();

• Realtek Fast Ethernet Controller RTL8139 works do not under Windows 7.

  I have a problem getting my Realtek Fast Ethernet RTL8139 controller working under Windows 7. During my first installation of windows, in which the controller was visible device manager, I think to remember, but after the first reboot, it disappeared.
  I have two controllers active ethernet in my system, the first one mentioned above and the second: Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [on board].
  Certainly, the controller who is not found is working because LEDS are light when I connect the card to a cable. The other computer that is connected to my PC even shows that a 100 Mbit connection has been created (with problems though). However, it is not possible to communicate.
  I already tried to install the latest drivers from Realtek for Win7 page (dated on the 22.09.2009) but it did not help.

  System Specs:

  Processor: Pentium Dual-Core CPU E5300 @ 2.60 GHz
  (Vivid RAM) memory: 4.00 GB
  Graphics: NVIDIA GeForce 9500 GT

  System

  Manufacturer: Gigabyte Technology Co., Ltd..
  Model: G31M-ES2L
  SystemType: 64 Bit - OS
  Number of cores: 2

  Network card:

  Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [work]!
  Realtek RTL8139 Fast Ethernet Controller (NDIS 5.1) [DOES not work!]
   
  OS: Windows 7 Professional (Version 6.1.7600)

  Hello

  Uninstall the audio player of the program and features.

  Then install the Realtek driver by downloading it from the link below:
  http://America.Giga-Byte.com/filelist/Driver/motherboard_driver_audio_realtek_azalia.exe

  Cheers and enjoy... :))

• EFEX Pro works do not under El captain

  Hello, if anyone can help that would be great

  EfEx Pro installed but does not work in Photoshop elements 12 under El Capitan, ok on the Mavericks.

  I have watched a few posts but include no bugs.

  When I look at the filters there is no EfEx Pro options

  Thank you very much

  Roger

  HI Jon,

  I left elements and now he manifests

  Thank you

  Roger

• Loading multiple SWFs and saving them (code works is not under Chrome and Firefox 23)

  Hey guys,.

  Anyone has an idea why this suddenly does not work? (It works under internet explore but not firefox and chrome)

  The code below is placed on my main swf to preload all my external swf and store them for not having to wait too long to get there.

  Thank you guys.

  I took the code by btw: http://www.beautifycode.com/the-finer-art-of-loading-2-handling-multiple-swfs#snippet

  I am running flash player 11.8.800.94... He used to work under Firefox and Chrome

  	var _swfLoader:Loader;
  	var _swfRequest:URLRequest;
  	var _swfPathArr:Array = new Array) '00.swf', '01.swf', '02.swf' );
  	var _swfClipsArr:Array = new Array();
  	var _swfTempClip:MovieClip;
  	var _loadedSWFs:int;
  	startLoading (_swfPathArr);
  	function startLoading(pathArr:Array):void {}
  	_swfLoader = new Loader();
  	_swfRequest = new URLRequest();
  	loadSWF(pathArr[1]);
  	};
  	function loadSWF(path:String):void {}
  	setupListeners (_swfLoader.contentLoaderInfo);
  	_swfRequest.URL = path;
  	_swfLoader.load (_swfRequest);
  	};
  	function setupListeners(dispatcher:IEventDispatcher):void {}
  	dispatcher.addEventListener (Event.COMPLETE, onSwfComplete);
  	};
  	function onSwfComplete(event:Event):void {}
  	event.target.removeEventListener (Event.COMPLETE, onSwfComplete);
  	_swfTempClip = event.target.content;
  	_swfTempClip.customID = _loadedSWFs;
  	_swfClipsArr.push (_swfTempClip);
  	If (_loadedSWFs < _swfPathArr.length - 1) {}
  	_loadedSWFs ++;
  	loadSWF (_swfPathArr [_loadedSWFs]);
  	} else {}
  			//
  	}
  	};

  I have no problem with ff and I don't see any problem in chrome.

  You probably have a typo in if:

  loadSWF(pathArr[1]);

  should be

  loadSWF(pathArr[0]);