BUG: Windows Update, a negative impact on the user.

Similar Questions

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Window update problems, being of error "the server is not open.

  I tried to open Windows Update, I get a message "the server is not open. Microsoft Fix It can not solve the problem. Can anyone help?

  Alan-rr

  Hello

  1. what FIXIT did you use exactly?

  2. is the computer on a domain?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  You can try the steps under I would fix it myself and check if it helps.

  Hope it will be useful and keep us informed if you need help.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Windows update keeps reminding me with the same updates

  Windows update keeps reminding me with the same updates

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 22:22 Monday, may 28, 2012

• A fix with one click for Windows Update problems - how to reset the Windows Update components?

  I can't check, download or install updates through Windows Update.  Help!

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the button below and follow the instructions.

  
  Solve this problem

  For more details on this solution, read the article here.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Error message, "unable to configure windows update. Try to restore the changes.

  Why is it I can't update windows? When I finished my update it says to reboot my PC and restarting, it says "could not configure windows update. Try to restore the changes.

  Please help me solve this problem.

  Hello

  1. the updates of windows do not settle?

  2. don't you make changes on the computer before this problem?

  I suggest that you try the procedure described in the article mentioned below.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: Before you perform the upgrade in-place, I suggest you to save all your data.

  Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

• Satellite L25 - after that Windows update is unable to use the Wi - Fi button

  I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

  What I have to do is disable the adapter, turn it on, then re-boot.
  If I turned off the computer, I di everything again.

  This will make the button work? Or is there a setting that is always on?

  Hello

  > after a windows update, cannot use wi - fi on the front button
  Do you mean the button that launches Internet Explorer?

  According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
  Is this right?

  I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

  Welcome them