bugs in firmware for the photo frame digital df800b2
I have the same frame and the same question! I tried the solution and it did NOT solve my problem. Pictures are not displayed in sequential order (they jump around a bit in sequential mode).
used file names...
001_MG_2755.jpg
002_MG_2756.jpg
003_MG_2757.jpg
004_MG_2758.jpg
... etc...
By any measure, these are sequential file names!
I understand that there is a firmware update available, according to the comments on other forums. Can HP please post the updated firmware for this forum or PM it me at least? There are many bugs in the firmware originally supplied with the chassis and I think HP should blithely seek to make their customers happy with the purchase of HP products! This firmware update should be available.
My framework model is "df800b2-16". I can provide S/N on request email from HP, if that's what it takes.
----------------
As an experiment, I even changed all the names of the file 001.jpg, 002.jpg, 003.jpg... etc.
He still jumps around (jump 2-3 images back anyway - not 100% sure how, but clearly to jump some photos) and about runs in the REVERSE order. (Top number first!)
This is clearly what is expected in a "sequential" display of images!
------------------
Next experiment was to 10 images with the name of the file (number) on each image... 001.exe jpg by 010 jpg file names.
Value sequential mode, 5 seconds interval, no transition, read CF card, I get the following "sequence":
5,4,6,3,7,2,8,1,9,10, 5,4,6,3,7,2,8,1,9,10... (repeat this pattern - sequential sentence!)
Please send/post fixed firmware!
Appreciated your fast response!
Finally got solved... see this other thread:
http://h30434.www3.HP.com/PSG/board/message?board.ID=Other1&message.ID=514#M514
Tags: Notebooks
Similar Questions
-
How can I resize the photo frames to adjust photos cropped to Blurb photo book?
I want to put the pictures as a photo using Lightroom book and the Blurb photo book module. Question: I do not see how to drag the sides of the photo frame individually to fit my photos, which are often cropped produced long skinny shots or those wider than the usual 4:3 format (not to make the frame of the photo, but to make the image go up the photo. I can easily do in Apple Aperture, but cannot see how to do in Lightroom in the Blurb module. I contacted directly the text of presentation that told me to contact Adobe - and this seems to be the only way to communicate with them. Help, please!
Hello
It's actually pretty simple, so, of course, I understood your request with precision.
It is possible for the two control the zoom and the frame of the size on a page.
Let's say you want the entire image on the page to a size different from the default.
All that is necessary is to select a particular page by clicking on it.
You know that he was selected by the yellow outline around the page.
Then, hover on the edge of the image as it exists on the page.
Try both horizontal and vertical edges as needed until you get a change in the cursor of the mouse that looks like a cross with arrow heads.
L click and drag the image around until it is the size you want on the page.
The image remains centered on the page.
The proportions of the image is not altered.
If you choose, there is an additional control to zoom the image, and then move the image around, in part, to get the framing you want.
See how you go.
Thank you
-
How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?
See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8
-
Cannot find the latest firmware for the Toshiba 40TL838G
Hello
I am trying to download the latest firmware for the 40TL838G model, but I'm not.
Where can I find it?
Thank you.
The same has been asked in this thread
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914We can receive the update only via a network update
In which case you will not receive updates via the network, your firmware is up to date. -
What is the latest firmware for the A65 Alpha as of February 17, 2013
From this date, Version 1.07 is the last update of the firmware for the camera I AM-A65V. It can be downloaded from the Sony eSupport at http://esupport.sony.com/LA/p/model-home.pl?mdl=SLTA65Vsite.
If my post answered your question, please mark it as an "accepted Solution". This will allow users to more quickly find verified solutions.
-
Need new firmware for the drive (Mat * un UJDA750)
I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?
THX.
Hello
I put t know why you need a firmware for your combo drive.
As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.Good bye
-
After you import an image (.jpeg) file for the Photos on my Mac app, can I safely delete this image file to save space on my hard drive?
Yes, you can remove the file from the imported image, if you have imported the image as managed. IE preferences in ave Photos settled on "import: copy items to the photo library" being the default.
-
How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.
Hi Infogoddess,
Thank you for using communities Support from Apple! If you try to find the serial number of your iPod touch or another Apple product, you can find information and the steps in the following articles useful:
iPod: how to find the serial number - Apple Support
Find the serial number of your Apple - Apple Support product
See you soon
-
I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.
I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).
In the document:
High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
is written:
Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
With what other subsystem on the device can generate a source of the clock? How?It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
initialDelay, freq, the duty cycle); worksBut it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clockThe sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the taskBut it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0Hi datafriend,
using what it says is correct:
Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.
There are also 2 ANSI C examples in this regard:
http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485
http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488
So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)
-
When comes out the next firmware for the "rocket"?
When comes out the next firmware for the "rocket"?
Sometimes in the coming months
-
Also, I don't want the same tag for the photo n ° 1 to appear as a tag for the following pictures.
I called Hewlett Packard on this problem and they told me that there is a problem with Microsoft software. They took control of my computer remotely and were not able to remove the old labels of previous photos.
Hello the first question,
Thank you for visiting the Microsoft answers Site.
The relay please if you use Windows Photo Gallery to edit tags or properties file of photos. To remove a tag to a picture using Windows Photo Gallery, Windows Photo Gallery navigation pane you can right-click the label, and then click on remove. When a label is removed in Windows Photo Gallery navigation pane, the tag is removed from all the photos and videos that use the tag.
You can also manually add a Tag or change file properties for a picture using Windows Photo Gallery.
For more information on the use of tags and Windows Photo Gallery, you can view the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/tag-pictures-so-theyre-easier-to-find
You can also see the answer to your earlier post below:
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Updates firmware for the isa550w
y at - he's going to be more updates of firmware for the isa550w or a cisco decide to stop making the deadline of November 14, 2014? I know that this product is reached it's end of life cycle soon not if cisco decides to make the updates of firmware for this product earlier than November, it would be good to know
link to your solution two to the following: -.
http://www.Cisco.com/c/en/us/products/collateral/security/small-business...
-
I love the develop module, but I'm doing something wrong in the library
In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr. Please help (PC user)
And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.
Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.
-
I signed up for the photos of 10 a month, and I chose pictures of licenses. However, when I download the pictures I have a license on my desk always have the "stock" of writing through them. How can I remove this? Thank you
Follow these steps to download: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?
-
I pay for the creative cloud for the Photo, but applications still saying, that I have to buy, and the time of the trial is over
Iron,
Please see this link:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Guinot
Maybe you are looking for
-
Update combo (why are there 2) 10.11.2
I went to download the Combo update for 10.11.2 but there are 2 (two) Combo updates: a watch (file size 1.4y GB) and the other (file size 1.4 GB). While I've updated? Here the link ID: Apple - Support - downloads
-
brother printers are compatible with the HP laptop
My brother MFC-7420 printer is compatible with my new HP laptop? The software is not installed. In fact, any other software, I tried to download from a CD will not be installed. Y at - it secret inatalling software on HP laptop? It was so easy on my
-
Issues with the display settings - all super tiny
I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny. I found a page via th
-
You wonder where he went the folder all users in Windows 7
I was wondering if there where to the default desktop icons in windows 7.In general just edit the users folder XP all, as my company does a lot of work remotely, this folder is convenient to be able to change the icons by default etc.So I was wonderi
-
IPSEC tunnel upward - traffic has failed. TTL expired on one side.
Soho office: Site has, ASA 5505 10.29.0.XX/24 Main office: Site b, ASA 5540 10.75.0.XX/24 Tunnel establishes - phase one and two good. Packet tracer completes successfully on both sides. A customer on the site of soho cannot send pings to 10.75.0.x