Build error on install

Similar Questions

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Upgrade 'Stacked vs. Non-Stack Build' error-

  During the upgrade from Vista to Win7, I am stopped by an "stacked vs. non-Stack build" Error Message... which means this message - means and how to successfully upgrade to Win7?

  For all questions, installation of Windows 7, the Windows 7 Forums are the best place to ask, as they came across these errors before:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• chronic build error

  Since today, I get a build error in all of my projects:

  Error occurred during the build.

  Errors under builder "App descriptor Validator" of the project "MNKit".

  java.lang.NullPointerException

  Google gives no guidance on this. Restarting Momentics, or clean up projects does not help.

  At the opening of bar - descriptor.xml, I get:

  java.lang.NullPointerException
  to com.qnx.tools.bbt.core.signing.BarSignerTool. (BarSignerTool.java:105)
  to com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider$ BBTNativeSDKDescriptor.getBarSigner (BBTNativeSDKProvider.java:172)
  at com.qnx.tools.bbt.core.sdk.AbstractBlackBerryTabletSDKDescriptor.getValidator(AbstractBlackBerryTabletSDKDescriptor.java:122)
  at com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider.getValidSDKs(BBTNativeSDKProvider.java:97)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.collectValidSDKs (IBlackBerryTabletSDKDescriptor.java:327)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.getValidSDKs (IBlackBerryTabletSDKDescriptor.java:311)
  at com.qnx.tools.bbt.internal.core.utils.BlackberryTabletSDKUtils.getAvailableTargetPlatformVersions(BlackberryTabletSDKUtils.java:130)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart.getAvailablePlatformVersions(GeneralAdvancedPart.java:146)
  to com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart. (GeneralAdvancedPart.java:69)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createLeftContent(GeneralPage.java:65)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createFormContent(GeneralPage.java:54)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.BBTFormPage.createFormContent(BBTFormPage.java:92)
  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:241)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:325)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:211)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:308)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addBBTPage(BBTXMLEditor.java:233)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.createGeneralPage(BBTXMLEditor.java:240)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addPages(BBTXMLEditor.java:324)
  at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:348)
  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)
  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)
  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)
  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2764)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610)
  at org.eclipse.ui.actions.OpenFileAction.openFile(OpenFileAction.java:99)
  at org.eclipse.ui.actions.OpenSystemEditorAction.run(OpenSystemEditorAction.java:99)
  at org.eclipse.ui.actions.RetargetAction.run(RetargetAction.java:221)
  to org.eclipse.ui.navigator.CommonNavigatorManager$ 3.open(CommonNavigatorManager.java:185)
  to org.eclipse.ui.OpenAndLinkWithEditorHelper$ InternalListener.open (OpenAndLinkWithEditorHelper.java:48)
  to org.eclipse.jface.viewers.StructuredViewer$ 2.run(StructuredViewer.java:866)
  at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
  to org.eclipse.ui.internal.JFaceUtil$ 1.run(JFaceUtil.java:49)
  at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
  at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:864)
  at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1152)
  at org.eclipse.ui.navigator.CommonViewer.handleOpen(CommonViewer.java:462)
  to org.eclipse.jface.viewers.StructuredViewer$ 6.handleOpen(StructuredViewer.java:1256)
  at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:275)
  to org.eclipse.jface.util.OpenStrategy.access$ 2 (OpenStrategy.java:269)
  to org.eclipse.jface.util.OpenStrategy$ 1.handleEvent(OpenStrategy.java:309)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701)
  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665)
  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2499)
  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:679)
  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668)
  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
  at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123)
  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  I am running on a Mac with the new Oracle Java 1.6.0.37 Mountain Lion.

  solved.

  Re-install Momentics and the simutaor is done.

• Removal of Flash Builder 4.5 installing Flash Builder 4.5 for PHP

  There is a very serious mistake with the Flash Builder 4.5 to install PHP (of http://static.zend.com/topics/Flash-Builder-for-PHP-4.5.0-Release-Notes.txt ):

  If Flash Builder 4.5 (not PHP) is already installed on the machine, and the 
    product (Flash Builder for PHP 4.5) is then installed in a different location, 
    the user gets the "FB is installed" dialog.
    After clicking OK, the installation rolls back and removes both Flash Builder
    and Flash Builder for PHP.

  My questions:

  Can Flash Builder 4.5 for PHP be installed in the same location without deleting Flash Builder 4.5? If so, please define 'location '.

  Is there a work around for installing the two flavors of Flash Builder 4.5 and avoiding the issue of the above deletion?

  Can be a single version of do-it-all of Flash Builder 4.5 install that combines the features of these two flavors of the SDK and Flash Builder 4.5 product?

  Flash Builder 4.5 for PHP includes the exact version of Flash Builder 4.5. We do not allow facilities side by side of Flash Builder 4.5 and Flash Builder 4.5 for PHP, you need to uninstall Flash Builder 4.5 before installing Flash Builder 4.5 for PHP. The error message you see is that we have not detected FB 4.5 earlier in the installation process, but after you close the dialog box you should just be able to run the FBPHP installation program once again without a problem.

  Hope that makes sense!
  -Heidi

• Satellite A50-111: I get an error: cannot install MBR disks

  I have a satellite A50-111. The system with the error would not start a system disk and tried to boot from the network.

  To get the pc working, I tried to reinstall Win XP Pro, but I get an error: cannot install MBR disks

  How to solve this?

  Jon

  Hello

  Have you tried to install the unit using the supplied restore CD?

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• 670 error when installing the update for silverlight KB2416427

  Original title: cannot install the update for silverlight KB2416427

  • 670 error cannot install the update for silverlight KB2416427

  Hi ithakiman,

  1. which version of the operating system?

  2. have you tried to install the update manually?

  First try to install the update manually and check.

  See the links to download the update below:

  http://www.Microsoft.com/Silverlight/

  Description of the update for Microsoft Silverlight: 28 September 2010

  http://support.Microsoft.com/kb/2416427

  Also you can post your question in the Silverlight forum for further assistance:

  http://forums.Silverlight.NET/forums/13.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.

  I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge.  I pointed out quite in the restart including manual online, the fact to unplug printer, etc..

  Help, please.

  This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
  http://goo.GL/Nlqpg

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you!

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Upgrading from Quickbooks 2012 gives error Windows install is not properly installed

  Received system error. Installed Windows is not installed corredtly

  During the upgrade from Quickbooks 2012 received the "F:\\thirdparty\dotnet40\dotnetfx40_full_x86_x64.exe" message that ends above message.

  Try the procedure described here: http://support.microsoft.com/kb/315346

• 302 error when installing my wireless router

  302 error when installing my wireless router

  Wireless routers are generally not required to be "installed", so please explain exactly what steps you follow, and when the error message appears.

  Be sure to include:

  • Full text of the error message, without paraphrasing.
  • Brand and model of wireless router.
  • Windows version, including service pack (start > run > winver > OK).

• error message "install server does not.

  Trying to install NERO 7, windows Setup hangs on preparing for installation & finally gives error message "install the server does not. Any suggestions?

  Hi JasonL6606,
   
  -You are able to install other applications without any problem?
   
  The process of installing or uninstalling a program may fail for several reasons. This article describes the causes and offers a resolution for this problem. Check if it also helps you to fix the problem:
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.