Build for the iPhone5 and the AppStore

Similar Questions

• update my .ipa in DPS App Builder for the test does not work

  Hello

  I create my .ipa file in DPS App Builder for the test on my iPad, before I have to publish on the app store. No problem. I have tested and seen a few changes to make. I made the changes on my folio, updated in the generator of folio of indesign (in the cloud). Then I go back to DPS App Builder and rebuild a file .ipa from 'Manage' and 'Edit', download and test my certifates, windows seems to work ok. Then I created the new .ipa file (after deletion of the one on my desktop and iTunes) but when I sync it back on my iPad is not up-to-date. It is always the first version of my folio without changes.

  I tried to create a new application from the beginning, but the serial number unique edition no longer works. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I found no answer in the guide step by step on this issue.

  Or is it possible to completely delete the first version in DPS App Builder to recreate it without losing my serial number unique edition I have has not itself present Apple yet?

  I have something to do in the Folio Producer?

  Thanks for your help.

  Julien.

  Single edition series is a use of time, so change is not possible your end directly in case you want to use the same serial number. In this case, you must contact the technical support of DPS, who can get an approval on a serial number reset after reviewing the need.

  In this case, I'll take this offline with you regarding the forum post # http://forums.adobe.com/message/5597607.

• Building for all resolutions and the OS app

  Hi all

  a very strong issue for me: I want my application to support a lot of existing resolutions and operating systems, from 4.6 to 6.0. I know how to write this code, so my headache lies in another field - compatibility. Typical problems and pitfalls one may face? It's a way to write * secure * code that works both touch and non touch devices smoothly?

  Some APIs are available only in the newer versions, some are deprecated. For example, now I use "navigationClick" to manage both trackball and touch events, and it works fine. What other functions handle that you know will work for sure on touch and non touch devices?

  Yes, 4.6 and 4.7 + need to the different versions, not so much because of the new API, but because 4.7 devices set lower versions in a ugly compatibility mode.

  I have much experience with coding special touch features that I have them never required in my applications. I've implemented workaround found a colleague-based features:

  You can detect a touch device using canvas.

  public static final boolean IS_TOUCHDEVICE = new Canvas() {}
  protected void paint (Graphics graphics) {}
  }
  }. hasPointerEvents().

  based on this value I double the size of some input fields, so people with sausage instead of fingers can manage the

  As there are a lot of resolutions and new devices bring even more I would never consider to create a version by resolution, it would never end!
  a possible solution would be to create an additional library that contains only the graphics for a resolution, but it depends on your application if saved space would be worth for the extra complexity (and the cost of the added support).

• Build for the success of peripheral liberation but build for debugging device failed

  Hi, I have created new project with the new SDK of my previous old SDK which is already can build release and debug of the device device.

  I'm just copying the file in the src folder and active and made the minor change due change of myApp.cpp to applicationui.cpp

  (I'm doing this because when create export release build, the size of .bar .bar file is big - I'm already the clean)

  When I build this device release is success but for device debugging failed.

  The error is:

  make: * [Device-Debug] error 2

  make [1]: * [debug] error 2

  make [2]: * [o.le - v7-g/myApp] error 1

  How to solve this problem?

  Something I forgot? or things usually cause this?

  Thank you

  Ah I found the solution.

  Must add the .pro file:

  LIBS +=-lbb

  Maybe on the old SDK don't project any need to add this, but the new SDK project may need this (I don't know). But after that I added this on my .pro, the success of my project build on the device debugging.

  Thank you

• Purchased pack OEM system builder for desktop computer and want to install it on my laptop

  I bought the Win 7 Prof OEM System Builder Pack for my office and now wish to uninstall/drop it and install the same on my laptop. You please suggest the procedure to do this.

  Concerning
  Sanon

  You can not, the first computer, you install on it is linked to life.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Popup in lieu where build for the installer

  When I build the installer, it popup the request of LV8.2.1 installation location.

  I put LV8.2.0 CD and the CD of driver, all may not work.

  Any suggestion?

  Hi Turbot,

  I tried a bit of searching in the forum. Please browse the forum below and see if you can solve the problem of the solution or not:

  http://forums.NI.com/NI/board/message?board.ID=200&message.ID=18878&requireLogin=false

  http://forums.NI.com/NI/board/message?board.ID=140&message.ID=23509

  You can consult this KB:

  http://digital.NI.com/public.nsf/allkb/C3666BA408F81E59862570D20056E692?OpenDocument

  http://digital.NI.com/public.nsf/allkb/5C55288F366FC5CA862570F500680F7C?OpenDocument

  Let me know if the article has solved your problem or not.

  Sincerely,

  Krisna Wisnu

• Why my compiled exe asks for the location of the subvis when it is installed on a different computer?

  Hello

  I have a piece of deployable software, I developed and so I created two build specifications to produce an .exe file and a Setup program.

  The build for the installer specification includes the exe compiled and all the SubVIs necessary to reside in a subdirectory in the installation directory, and when it is installed on another computer, the SubVIs are in the right place.

  However, when I install and run it on another computer, a dialog box appears prompting for the location of the SubVIs, I select whoever he wants, and he then charge the remaining screws and works normally.

  Is it something to fundamentally miss the way SubVIs are called after using an installer, or y at - it a way to group them in the .exe or the installer so that I do not receive the dialog box?

  Many thanks in advance,

  Sam

  
  

• For the first time using BMP - app ever built, plugin file error constant

  Hello - I am trying to build for the first time and many plugins are errors. I am commenting them one at a time from the XML config and one of the culprits is the plugin file that I need to use. The other is the network plugin which also gives errors. The State errors that are not compatible with CLI 6.3.0

  I know it's the plugin developer to make compatible - y at - it something somewhere that indicates which versions of the plugins are compatible with versions of BMP? How can I find out what previous version of BMP is compatible with anything?

  Also, and this might be relevant to the question - when I look at the BMP to see what are the versions that I build for, I see that apparently I'm targeting iOS4.2?

  http://www.rickluna.com/pgb_err.PNG

  In my XML I'm deploying to iOS 9 but does not change the value of GBP v 4.2

  < preference name = "deployment target" value = "9.0" / >

  DRM for suggestions!

  r

  These plugins are all using the deprecated point rating. You must use:

  etc.

  Can I ask where you got to go to? I want to assure you that the resource is updated to the correct format.

• Hi I organize a creative cloud membership, are there additional costs for the Enterprise edition DPS? Thank you!

  I am willing to produce a monthly magazine using the DPS and I was wondering if there is any additional charges or if everything is included with membership full creative cloud.

  Ive seen that only editions for ipad are free, but I need to build for multiple platforms and think that the Enterprise edition would be preferable.

  Can someone advise.

  Thank you

  Yes... and these costs are important.

• [Consolidation-locked] Support for the Nikon D600 RAW?

  When the update of Adobe RAW will build for the Nikon D600?

  Title of the message was edited by: Brett N

  Lightroom and Camera Raw 7.2 4.2 (11 items) are currently available and provide support for the Nikon D600.

  Go to help > (check) updates installed.

  Please visit: http://forums.adobe.com/message/4785056

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• Two build for two different OS version

  Hello

  I have two different construction for two different OS version of the same application.

  It's a build for v5.0 and one for version 6.0.

  So how can I download this two builds on appworld

  can I download two builds?

  How appworld process works for different os?

  -David

  When you set your release simply add two bundles, for example MyApp50 and MyApp60. Download the file of cod for OS5.0 and speify minimum supported OS version 5.0. After that, download the 6.0 bundle and specify minimum supported OS version 6.0. And select all of the possible devices for two cod.

  App World will do the rest is the latest version that is possible for a given user, so users with 6.0 and above will receive 6.0 cod, while users with OS5.0 will receive the 5.0 file cod.

• App integrated with Flash Builder 4.6 and compiled for iOS, error now when loading to the appstore

  I built a simple application using Flash Builder 4.6 and have successfully deployed to the Android Market (after testing on my own Android device).  I also took this same application and compiled for iOS and tested on my iPad.

  I then did the Release with the final 'Release for App Store Distribution' option in the release generation Wizard.  I have all the certificates supply correct in place and compiled the application in a .ipa file.

  At this point, you use a MAC, I ran the Application Loader utility to upload my app to itunesConnect portal to get it in the appstore.  I already went through the steps to enter metadata, pricing, and screenshots in itunes connect portal and just need to download it for review.

  When I download the .ipa file into the application loader, it gives me the following error:

  "iPhone/iPod Touch: contains executables of the application not supported architectures: arm.

  Anyone have any idea what this means and how I can fix this?  Any help is greatly appreciated!

  Thanks in advance!

  He solved.  Just add the following text in the tag for iPhone in my app descriptor XML file:

  UIRequiredDeviceCapabilities

  WiFi

  ARMv6

  ARMv7

• Tried to use iTunes to restore iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the mode of recovery, apple server and the internet. Help?

  I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?

  Error 17 refers to network problems. Take a look at these articles and try the suggestions:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...