build installer with include file 2009

Similar Questions

• How to clone a Dual Boot XP Installation with only files Bootloader on C:\

  For me one of the hardest things to do with a problem in a discussion text is to indicate clearly what disk and partition that I want to talk.  For those who need a refresher in the nomenclature of charger for the startup of Microsoft, it's here.  Others may wish to move on to the next paragraph.  The specification of a given partition is of the form multi (a) disk (b) rdisk (c) partition (d).  But for any ordinary computer, a = b = 0, so we cannot forget for the discussion thereon.  The c value is the number of the disk in the boot order, with the boot drive with c = 0.  The value d is the partition number with the first partition on the disk with d = 1.

  In the interests of my presentation that follows, I will refer to rdisk (0) partition (1) as r0p1, rdisk (1) partition (3) like r1p3, etc to save space and we hope to maintain a clarity of thought.

  My intention was to clone successfully my dual boot Windows XP Edition family, and Windows XP Pro installation from a larger drive to a smaller drive.  Unfortunately, technical cloning of hard disk Partition Wizard Home failed due to the fact that there is more data on disk more capacity that fits on the smaller disk.  To be precise, there are a score of additional data on the largest drive F:\ r0p4.  So I used Partition Wizard Home to the clone C:\ r0p1 (the system partition that has the XP bootloader files), D:\ r0p2 (Windows XP Pro) and r0p3 E:\ (Windows XP Home) one at a time.  Because I'm using a disk controller hard PATA TX2 promise with the bios settings fixed, the only way to change the order in which the bios starts the disks is to change disks data wiring. I made that as simple as possible by using the two captains of PATA.  Note that the partitions that I cloned were G:\ r1p1 H:\ r1p2 and I:\ r1p3.

  To help the reader understand the placement of hard drive partition, repeat myself below.
  C:\ r0p1 Windows Bootloader files only (System, active) Bootloader of Windows r1p1 only file G:\
  Windows XP Pro H:\ r1p2 r0p2 D:\ Clone Windows XP Pro
  R0p3 Windows XP Home Edition (Boot) I:\ r1p3 E:\ Clone Windows XP Home
  R0p4 F:\ data partition

  After cloning, I made the following changes to starting XP r0p1 and r1p1 Chargers.  I added the ability to each Boot.ini file to start, r0p2, r0p3, r1p2 or r1p3 to eliminate the duty the wiring to study how the work was going.  I have created a boot loader diskette bootable with the same exact boot loader files in it, too.

  I discovered the original disc start, I could successfully start all four of XP with the r0p1 bootloader or the floppy boot loader.  But when I switched the order of disc, only the floppy drive would start in all four of XP.  The bootstrapper on r0p1 never appeared.

  I take this to mean that a redirect command where Windows is to search the bootstrapper may be necessary.  I boot from my Windows XP SP3 slipstreamed boot drive and access the repair console.  First I ran bootcfg/list and to my surprise, there is no entry found.  I took this to mean that windows searches for the bootloader files in the right place.  Is it possible to redirect windows to their position?  Think I remember reading something on the redirection of the search for the bootstrapper files.  I also thought about the command that rewrites the MBR, but got a warning that my MBR was specially built and serious consequences could occur, so I'll stop before making a misinformed choice.

  While I'm hoping for a generous person offers help, I got back to the top of all partitions on both disks using Acronis True Image.  Then if worst comes to worst, I can experiment with the controls of recovery without fear of losing all my work so far.

  Best regards
  Max

  I finally discovered that the two related errors that I made which prevented me from being able to start the operating systems Windows XP cloned using the files of Bootstrapper on the cloned C:\ partition.  Unfortunately, I had never taken the time to check the veracity of 'files bootloader being on the C:\ partition cloned'.  In fact the original C:\ partition was a primary partition, then the so-called C:\ partition "cloned" was a logical partition.  This fact makes no difference for the boot loader diskette XP that I had built, because he provided the bootloader files in a separate environment to that of the two hard drives.  But because the partition of the C:\ drive "cloned" was logical and not primary, there's no way I could do the C:\ partition "cloned" active, because only a primary partition can be active.  And the manufacturing process an active primary partition is crucial, precisely because it tells the computer where the Windows XP bootloader files.

  In my case after that I discovered that the C:\ "cloned" was logical, I used Partiton Wizard to convert it to a primary school.  But even in this case, Windows XP could not find the XP boot loader.  It was only when I started Wizard Partition a disk using and marked the partition C:\ cloned as assets that the bootloader has finally appeared.

  Even in this case I was not completely out of the Woods.  Because I had left the original source of the operating systems that are copied to the computer while the problem of bootloader, Windows had kept the previous drive letter assignments after that hard drives starting positions were exchanged.  So when I started out in what should have been Windows Home on E:\ drive, I discovered that Windows had kept the previous letter of partitions I:\.  And the drive system has even changed the C:\ drive to drive G:\.

  Less than a year, I would have thrown to the top of my hands which happened and began on with the cloning operation.  But because I googled for Windows XP system or start letter has changed, I discovered that what I had to do was to go into the registry and swap disks back E:\ and I:\ value names, and do the same for the discs back, C:\ and G:\.  And when I got to Windows XP Pro, I also had to swap the disks back D:\ and H:\ value names.  The only drive on that I had not to swap names was my original data F:\ disc.

  Finally, I believe that it is time for me to say why I went to all this trouble because I leave the two disks on the computer.  2 years 1 TB WDC Green Player is coupled to the drive controller Promise TX2 PATA is to use a SATA converter IDE, during the five year drive natively 300 GB Maxtor PATA.  Using the free software software Disk Bench with the windows pagefile disabled, I repeatedly timed 480 MB creating files on both hard drives on all the different partitions and there seems to be an advantage of the maximum speed of 10 Mbps on the old Maxtor PATA drive converted SATA drive.  But the speed of creation for the two ranges of 20 MB/sec to 65 MB/s using the PATA drive, while the beaches of SATA drive about 20 MB/sec-55 MB/sec.  It would be nice to point out, however, that the WDC Green drive is environmentally friendly, but not a 7200 RPM drive.  I plan to study if measurements with Disk Bench with the exchanged boot disks and the disabled swap file will make a difference in the time it takes to create the file.

  Best regards

  Max

• I have 2 failure windows 7 installs with 35 GB of hard drive space, but I find no windows.old file?

  I have 2 failure windows 7 installs with 35 GB of hard drive space. but I find no windows.old file?

  The first installation failed because I had a copy of counterfeit Windows 7.

  I bought another copy and installed. Then, I got a horrible virus/worm that disabled all .exe files and the fix was just beyond me!

  I installed again but did not know that the previous facility where still there.

  I tried to clean the disc, but I don't me "from previous versions of windows" to clean.

  I find no windows.old file. (Enabled hidden files)

  Only I have a disc ssd 60gig and want the missing 35gig kindly returned to use.

  Can someone help?

  Check the system restore to see how much disk space it uses:

  Click Start

  Right click on computer

  Click on properties

  Click on advanced system settings

  Click on the System Protection

  Click on configure

  Adjust the amount of disk space allocated to system restore.

  In addition, the amount of RAM you have installed, it will take more disk space for paging, hibernation, and dump files.

• . Missing DLL? (nilvaiu.dll).. .when an installer of construction in 2009.

  OK, what we have here is a little grope in the dark... I have not built an executable/installer because I was working with LV8.6, so please bear with me here... before any such request, yes I find!

  Here's my process at this stage...

  I have a VI that works the way you want.  I want to make cela a stand-alone executable that I can run on a different computer to manage some controls.

  I have the runtime of LV 2009 installed on such computer.

  I then open my VI, yet once make sure it works as you wish and add a new project.

  This VI is added to the project.

  I now have the open Project Explorer and select Build specifications and select New/Application (EXE)

  On the following tabs, I get the following...

  Information... No action taken

  Source files... I select the VI and add it to the startup list screws

  Destinations... No action taken

  The source file settings... No action taken

  .. .and essentially leave everything to their default values.

  Generation hit and he built "My application", which is added under the specifications to build file.

  I took that target the folder containing the executable file included and tried to run it on my computer and it just missing the aforementioned nilvaiu.dll

  Now, I'm doing that too simple?  Missing a few steps?  I also went on the way to an installer and get the same missing dll when I run.

  I am more than willing to read and learn, but I'm just not be quality for the correct terms or in the right places.  A point in the right direction would be much appreciated guys!

  Thank you

  Chad

  

  nilvaiu.dll installs with DAQmx

• fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.
  I found a lot of files, but only does not NiVisaComponent.h, anyone know how to download or is this file has changed the name?

  I already install the driver NI-VISA v15.0 but still does not have this file.

  I have not "C:\Program NIUninstaller Instruments\MeasurementStudioVS2005\VCNET\Include" because my laptop is 64-bit.

  Hello

  If you see the file Readme VISA 15, you'll see that Visual Studio 2005 is not supported. It seems that the most recent version of VISA that supports VS 2005 is Version 5.2 for c# / VB.NET and 5.0.2 for MFC C++ (with Measurement Studio 2009).

• Measurment Studio 2015 Builder installer not conditioning not DLL Analysis.Professional

  Hello

  My application uses the package MS Anaylsis I want is not included in the Installer Setup Builder installer. I checked the "OR Measurement Studio Anaylysis .NET language runtime 2015 for .NET 4.5" in the Section of the driver NOR.

  After the execution of the installation on a machine of own generation Win8-64 my application generates a "could not find error Assembly" to "NationalInstruments.Anaylsis.Professional, 13.0.45.242 Version.

  A careful review of all available libraries does not suggest there is a more appropriate library to include in the build. My installation Builder is for a mixed environment, but my request is built as x 64.

  Can anyone suggest a solution?

  Thank you, Frank.

  Hi, Frank

  On your deployed machine, can you check the following directory and take a screenshot?

  C:\Windows\Microsoft.NET\assembly\GAC_MSIL\NationalInstruments.Analysis.Professional

  It is possible that this happens because your application was built against the 13.0.45.242 version of NationalInstruments.Analysis.Professional, but the version installs the 15.0.45.49153 OR Measurement Studio analysis .NET Language Runtime install. If this is the case, you can do two things:

  • (Recommended) Rebuild your application against the Measurement Studio .NET assemblies 2015 versions before you redeploy using the 2015 runtime installation programs.
  
  
  • Create an application configuration file that redirects 13.0.45.xxxx to 15.0.45.49153 NationalInstruments.Analysis.Professional.

• Build installer undefined error - 12 CDK_CreateNewWizard_Invoke.vi

  Search in the forum without solution for my mistake. I tried to build an installer with LabVIEW 2009 and I have each time the same error undefined-12. Here what I did:

  -J' made a very simple vi, build an application and Installer, the same error

  -J' downloaded the evaluation version of LabVIEW 2010, same error.

  -J' uninstalled DAQmx, same error

  -J' uninstalled my antivirus, same error

  -J' installed the evaluation version of LabVIEW 2010 on another PC, same error

  I joined the window with LabVIEW 2010 description of the error.

  Thanks for your help.

  DO NOT USE THE SOFTWARE FOR ADVANCED SYSTEM CARE. He deleted something you need to do an installer.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Update HTML files with nonstandard file extensions

  I use DW8/Mac to update my company's Web site. Recently, we have decided to make the site multilingual. To this end, our web server has been redesigned with multiple views. All the .html files have been renamed to. HTML.en and others. HTML.es files have been created for the Spanish version. And here, I came across a series of problems:
  
  (1) DW8 does not recognize files with. HTML.en &. HTML.es extensions to HTML. I scoured the Internet and found a solution for this one - I edited the /Configuration/DocumentTypes/MMDocumentTypes.xml file in the installation of DW to include new file extensions: .fr & .es. They now appear correctly coded by color in the editor of DW. Yes, Jose is more a problem, unless the DW gurus could direct me towards a better solution.
  
  (2) the real problem is this. Since I changed the file extensions for HTML files, the files are up to date is no longer automatically once I modified a DreamWeaver template file. I rebuilt the site cache - did not help. I tried "Edit-> Templates-> update Pages... ', this does not work either.
  
  I even tried to open a single page and make "Edit-> Templates-> apply a Page template", by checking the check against "Page updated when the template is changed" was present. Doing so change the page, but only once. Whenever I have change the model, this page does not change, because it is supposed to.
  
  Please advise!

  http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410

  I'm not sure that this will help the problem of model, though.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "oley-of-dragonia" wrote in message
  News:fe74ih$5ki$1@forums. Macromedia.com...
  > I use DW8/Mac to update my company's Web site. Recently, we have
  > decided to make the site multilingual. For this purpose our web server
  > was
  > upgraded to multiple views. All the .html files have been renamed to. HTML.en
  > and
  > additional. HTML.es files have been created for the Spanish version. And here I
  > ran
  > in a set of problems:
  >
  > 1) DW8 does not recognize files with. HTML.en &. HTML.es extensions as
  > HTML.
  > I've scoured the Internet and found a solution for this one - I've edited the
  > /Configuration/DocumentTypes/MMDocumentTypes.xml file within the DW
  > installation to include new file extensions: .fr & .es. They now appear
  > properly colour coded in the DW Editor. Yes, Jose is no longer a problem,
  > unless
  > DW gurus could direct me towards a better solution.
  >
  (> 2) the real problem is this. Since I changed file extensions
  > for
  > HTML files, the files are updated is no longer automatically once I modified a
  > DreamWeaver template file. I rebuilt the site cache - did not help. I tried
  > "Change-> them models-> update... Pages". ', this does not work either.
  >
  > I tried opening a single page and do "Edit-> models->.
  > Apply
  "> Model of Page ', ensuring that the check against"page update ".
  > When
  ' > changes to the model "was present. Then turn the page, but only
  > once.
  > Whenever I have change the model, this page does not change as it is supposed to
  > to.
  >
  > Please advise!
  >

• SMTP E-mail with attachment file - table error

  Hi, I am trying to send an e-mail with an attached file. The file I want to include is generated by the function "write into the file of measure" with a file specified by the user to input path. When I try to connect the path to the file in VI of attachments SMTP, I get an error saying that the source is a path, but the sink is looking for a 1 d of the pathnames table. Is it possible to convert the path to the original file in a table of paths, or another method to attach the file?

  I also tried using the old "SMTP send Email with attachments" feature by converting the path of the file in a string, and takes as the path of attachment, but he also didn't work.

  Thank you!

  With the help of the tool table of generation in the tables menu should do exactly what you are looking for.

  

• upgrade of streets & trips between 2009 and 2013, I'll lose my files 2009

  Lose 2009 files?

  Hello

  You should be able to save files 2009 However preferable to check with streets
  and travel of support from the community and Forum.

  Streets & Trips
  http://www.Microsoft.com/streets/en-us/default.aspx

  Streets & Trips - help and Support
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

  Streets and travel community
  http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Streets and travel Forum
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• I have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send.

  Original title: pdf files

  I am running microsoft windows xp home edition 2002. I always have problems with pdf files, sent to me by e-mail, download doc on my canon printer and the creation of pdf file to send. I use microsoft works Task Launcher 2004 edition.

  Is there an easy way to pass so I can handle pdf files?  Can anyone help?

  Thank you Tim

  Hello

  Please provide us with more specific information on the issue. Your post is a bit confusing.

  If you need to open the PDF files, you will need to install a PDF reader.

  If you try to print in PDF format, you must install Adobe Reader.

  Reference: http://www.adobe.com/downloads/

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• NEITHER supplied include files copied to project files?

  I pulled out a project compiled and disseminated under a particular version of the CVI [8.1.x].

  Then some time later, another person retrieved the project for maintenance and has tried to compile it, they could not find the NOR include files.

  They come back to me!

  The reason why they could not compile the project was that they used the CVI 9.x.

  The project was looking for the include files in \Program Files\CVI81. Complaints went to the Manager.

  So, the question is a practical common.

  If the list of project files, point on the NOR prescribed [installed] folder locations.

  or if the necessary include files be copied manually in 'local' project folders before the release?

  Thank you

  Scott Youngren

  Northrop/Grumman electronic systems

  The short answer is no: OR the include files must remain in their repertoire; the IDE should solve all the paths by itself.

  To learn more:

  • #include directives must only list the names of files, not the path names
  • All basic guidelines OR files include must go in the support of style (for example #include )
  • Instruments include files should go in the style of the quotes (e.g., "inifile.h" #include)
  • Your include files may go to the source folder or other folders of your choice (see following)
  • Change project options to set 'Include path' (i.e. folders where the include files are searched): applied to all the draft instruments loaded like a library specific to the current project for application-specific include paths

  I always got my projects in accordance with these rules and never had a problem in the upgrade version of the IDE while developing. You will see that most of them is automatically defined by CVI (e.g. when the system asks you to include some files needed for some statement: it uses the correct style).