Build the release version

Similar Questions

• Race of library slow when Alchemy app disabled in the Release version

  Hello

  I'm working on an application that an operation running through a library of Alchemy (written in C and exposed as .as) long.

  Here are the high-level logic to illustrate the idea:

  QNXSystem.system.inactivePowerMode = QNXSystemPowerMode.NORMAL;

  addEventListener (AlchemyLibraryEvent.PROGRESS, onProgress);

  addEventListener (AlchemyLibraryEvent.COMPLETE, onComplete);

  Call the library of Alchemy;

  private void onProgress(event: AlchemyLibraryEvent) {}

  update of the progress made in the user interface;

  }

  private void onComplete(event: AlchemyLibraryEvent) {}

  QNXSystem.system.inactivePowerMode = QNXSystemPowerMode.STANDBY;

  If app is in {disabled state

  QNXSystem.system.powerMode = QNXSystemPowerMode.STANDBY;

  }

  }

  In the bar-descriptor:

  run_when_backgrounded

  What happens is that the app works perfectly well (no matter the app is active, put off the power, the unit standby) in a debug build (by token of debugging).  However, when it is exported as a signed bar and running on the same physical device BB10, it normally only works when the application is active.  Whenever the application is disabled (when the screen is off, or app pushed back and another application is brought to the foreground), the application runs always, but at a very slow speed (about 1/15 of the original speed).

  I did some debugging and confirmed that when the application is disabled, she was continuing with NORMAL power at the rate of 60 frames per second, which seems to be quite normal.  What I don't understand is why the chemistry library runs a lot slower in the background in the Release version.

  As a proof of concept, I added the following code just before inactivePowerMode to NORMAL:

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  The build version will run at normal speed and the screen turn off.  However, if I press the device power button, or push the app thoroughly (and make another application in the foreground), he repeats the same behavior running slowly.

  Any ideas would be much appreciated!

  No, there is no way to take more CPU power when in the background. The operating system applies this to the user, so they have no apps churning through their battery on them. I would recommend that you inform users of this, so they can decide what they want to do. BlackBerry 10 is expected for the multitasking well, so I expect that they will enjoy and put the application in the background.

• How to write image files in the current folder in the Release version

  I'm able to do in the sims and on real devices in debug mode, but for some reason when I'm building a Release version I can not write in the current folder. I get write errors.

  I want to write the image easily in qml files in this folder as read when I write in the current folder.

  Write to the data directory instead - unable to write to the application folder & active

• Debugging in the Release version

  Hello world

  my new app uses a card to process the data. The data processor triggers a signal and slot this respons by closing the card. Well, at least while debugging. I tried the release just before you download for the BlackBerry World and I noticed that the card don't be closed. Data are transformed very well, but somehow the signal is not properly raised or the card cannot be closed. I have attached a bit of code to illustrate my operation.

  The processing of the data

  void WebpageFetcher::done()
  {
      DbHelper* dbHelper = DbHelper::getInstance();
      dbHelper->insert(some data);
      //Signal that we're done!
      emit fetchDone("Success!");
      delete dbHelper;
  }
  

  The Application

  fetcher = new WebpageFetcher(uri);
  connect(fetcher, SIGNAL(fetchDone(QString)), this, SLOT(fetchingDone(QString)));
  

  void ApplicationUI::fetchingDone(QString msg)
  {
      // Assemble message
      CardDoneMessage message;
      message.setData(msg);
      message.setDataType("text/plain");
      message.setReason("Success!");
      // Send message
      m_invokeManager->sendCardDone(message);
  }
  

  Now my question is: How can I see the output in Release version? qDebug will obviously not work, but I need a tool to help me understand this issue.

  Looks like the culprit was "build automatically" neglected my amendments to the code for the Release version. Although 4 wasted hours, could be worse

• Conditional with Ant (withdrawal, the Release version of debugger instrumentation code)

  I started to try the MonsterDebugger of. On the first thing that comes to my mind was the instrumentation code and have it in the Release version of the application.

  Does anyone have a good tip on how to make a conditional generation with Ant to remove this code?

  Unit tests are easy to remove by the exclusion of the name of file, since the tests do not alter the unit under test, but for the debugger, I need to at least import the debugger class and instantiate in the code.

  Thank you.

  You mean like this: http://livedocs.adobe.com/flex/3/html/compilers_21.html ?

• Conversion error has no platform during the Release version

  It is a very annoying problem for the release build file generation. Here are the steps that I have while buiding:

  1. Select project > export release build

  2. Select signed native installer

  3. import a certificate

  4. click on next.

  I've always had the following error:

  

  I have the following configuration:

  OS: Windows 8.1

  System type: 64-bit

  The Flash Builder Version: 4.6 Premium

  Installed FB: FlashBuilder_4_6_LS10.exe

  Help, please. It gives me a lot of headaches for a few days now.

  I tried to install windows 7 32-bit operating system and I have more problems on the export of release builds. I wonder if Adobe has released Flash Builder 4.6 for x 64 operating systems.

• build the specification version BUG VI

  Nor has screws to set and read the version of a specification of construction in a project of LV. However, I believe that when you try to assign a part of version 0 (zero), this value is does.

  This seems to be a bug in the theNI_App_Builder_API called VI

  Define .vi build Specifrication (path)

  My appliction for this is to restore the versions of the generation of all generations in a project 1.0.0.0. I'm goig to dig into the XML tags and to understand it on my own.

  Oops, he's had one but in the code I posted. Here is the new version.

• Signals of Touch will not work in the Release version, debug is ok.

  I have two containers that accept the touchEvents that are visible at the same time, one under the other.  Checking for one horizontal sweep, one for a vertical sweep.

  The debug version of my app past touch events in two containers.

  The release, however, only sends the key event to the top most container.  When I turn off the key up to the container page, the background container leads them.

  Is it possible to make "cross" to the lower container or to ensure that the two containers receive signals in a release?

  Has not initialized correctly, boolean indicator which controlled so if we allow the connection to establish.

  Sometimes, was true and another fake time.

  

• Best/Recommended way to record information in the Release version

  Hello

  I've searched around, but don't see any results on the issue yet. Then I would ask what is the best/recommended way to record Release version information?

  I use Momentics IDE 10.2. When I choose run or Debug, qDebug() & qWarning display information very well in the console of the IDE, but with "run" they don't show anything in the console. Tested on both Q10 & Simulator.

  Thank you

  Install your own messages QDebug Manager, do write to a file, for example newspapers newspaper. Then open a terminal on the device, navigate to the file and the type of your application:

  # tail -f logs/log
  

  to view the log file.

  Change your main.cpp along these lines:

  #include 
  
  static FILE * logFile;
  
  void logger(QtMsgType type, const char * msg)
  {
      Q_UNUSED(type);
      std::fprintf(logFile, "%s\n", msg);
      std::fflush(logFile);
  }
  
  Q_DECL_EXPORT int main(int argc, char **argv)
  {
      logFile = fopen("logs/log", "a");
      qInstallMsgHandler(logger);
      Application app(argc, argv);
  
      // Create the Application UI object, this is where the main.qml file
      // is loaded and the application scene is set.
      new ApplicationUI(&app);
  
      // Enter the application main event loop.
      return Application::exec();
  }
  

  Note: the file will be closed by the operating system, more messages are seen if you don't shut it down at the bottom of the hand. Why? because c is destorying local variables (app) at the end of the main, and who calls the string whole qt of parent-child destructor for your class of application as well.

• Deploy the Release version of the dictionary on the AIR

  People, Squiggly works well in debugging.  What should I do to deploy a release into the AIR?   I use the default AdobeSpellingConfig.xml.  And nothing complicated.  I must welcome the *.aff and *.dic on remote server and reference them?

  Thank you.  : ]

  If you don't mind, could mark this as answer?  Thank you.

  -Bruce, Adobe

• Cannot build the sample application headlesservice.

  downloaded the two service without head and UI sample app and imported 10.2 sdk.

  When you build the release version for app headlesservice it gives this error message

  Package failed: 1
  Error: Path access valid asset "active".
  (Point of the error: MD 31 October 2013 16:53:40)

  If I remove the current item in the asset, then the following error message

  Package failed: 1
  Error: Path access valid asset 'arm/o.le-v7-g/headlesservice.so '.
  (Point of the error: MD 31 October 2013 16:49:44)

  https://github.com/BlackBerry/Cascades-samples/tree/master/headlesservice

  garydev wrote:

  What version of the IDE are you running?  (version 10.2.x?)  Please notify.

  g

  SDK 10.2.1 bulid #201308081807 is not the Gold version.

• Application failed (MFC) in the release through the optimization of the compiler, but works well in the debug version

  I am facing problem with the Release version. Application works fine in the Debug version, but in the Release version a pointer initialized to contain the object of another class becomes allocation to different addresses, causing corruption to its values.

  My main application class is K32App
  code in K32App.h file
  CSheetPrintManager* m_pSheetPrintManager;
  CSheetPrintManager* GetSheetPrintManager() { return m_pSheetPrintManager; }
  
  In file K32App.cpp
  K32App::K32App()
  {
    m_pSheetPrintManager= NULL;
  }
  BOOL K32App::InitInstance()
  {
    if(!m_pSheetPrintManager)
      m_pSheetPrintManager= new CSheetPrintManager();
  }
  K32App::~K32App()
  {
    if(m_pSheetPrintManager)
      delete(m_pSheetPrintManager)
  }
  
   In my file  CSheetPrintManager.cpp
   void CSheetPrintManager::CSheetPrintManager()
   {
     //Initialized all member variables to default values.
     Init();
  
   }
   void CSheetPrintManager::Init()
   {
     m_nSheetType = SheetIllegalNone;  //long
     m_sBankEntry.Empty();         //CString
     m_bHistorical = FALSE;        //BOOL
     m_bDebitDetailsSet = FALSE;  //BOOL
     m_mapRequested.RemoveAll(); // Type CMap
   }
  

  During the startup of the application, when it reaches

    if(!m_pSheetPrintManager)
      CSheetPrintManager= new CSheetPrintManager();
  

  and trying to create a m_pSheetPrintManager object, a 'this' inside the CSheetPrintManager.cpp pointer shows a valid address (0x03768ce0) at the stop just to brace {, once I more in CSheetPrintManager.Init (), not 'this' gets different location and starting point to a different address (0 x 0000000) and then passing more its starting pointing to an another rental (0x03786ce0)} ", then arriving to m_mapRequested.RemoveAll(); 'this' points to some other location. back to main application C32App.cpp file I get next to 'm_pSheetPrintManager' error CXX0030 ' expression cannot be evaluated" in the window of the car. and application continues to run. See what get when move mouse m_pSheetPrintManager (can't post the image because need 10 reputation for him :) so antisocial)Auto window studio screenshot 

  In debug mode, I get m_pSheetPrintManager pointing to the same location during all the processing of the application and members are always correctly initialized.

  But in Release mode, m_pSheetPrintManager continues to point to the different location (address in the window of Auto value). and all the class member variables CSheetPrintManager garbage (Uninitialized) values with each line of treatment within the CSheetPrintManager class.

  If I disable the optimization of the c++ in Release Mode then it works very well without any problems.

  Any help/advice/suggestion is the most popular. Thanks in advance.

  PS: This is my first question here so please excuse if you lack something to point or express properly.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Headless app - Release version

  Hi guys

  It's time I was here there is .

  I have a little problem. With app without a head. I create myself a project of default app model headless in Momentics IDE.

  Make changes, because I need the monitoring of calls. Everuything works if I run the IDE app, all functions, process headless, etc...

  But... If I create a BAR as a "Release Build" file and install it on the phone DON'T WORK.

  Process without head told me, which is started. If I also check the monitor process and device then there is, but nothing WORKS.

  You guys have some ideas where could be the problem why the app stop working in the Release version?

  THX

  Jesus, I'm real BFU 

  Problem solved. I have permissions for control of phone etc. within a request not to the Headless entrypoint process entry point. So I just moved them.

• Build the DNG SDK on Mac with XCode 6.2

  Hi all

  I am trying to build the DNG_SDK Version 1.4 with XCode 6.2. I downloaded all the third party for the xmp and dng sdk libraries. After connecting with the current xmp sdk 201412 errors, I tried to compile DNG_SDK with XMP SDK Version CS6. The subproject XMP is in my DNG_SDK and is built successfully.

  For the DNG SDK, I always get errors from the linker and I have no idea why (without worrying which architecture I select i386 or x 64):

  LD/Users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/targets/mac/release/dng_validate normal i386

  CD/Users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/projects/mac

  export MACOSX_DEPLOYMENT_TARGET appears = 10.9

  /Applications/XCode.app/Contents/developer/toolchains/XcodeDefault.xctoolchain/usr/bin/CL ang ++ - arch i386 - isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOS X10.9.sdk-L/users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/objectives/mac/release - F/users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/objectives/mac/release - list of files/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy udz/Build/Intermediates/dng_validate.build/Default/dng_validate\ release.build/Objects-normal/i386/dng_validate. LinkFileList - mmacosx-version-min = 10.9/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy udz/Build/Products/libXMPFilesStatic.a/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy carbon udz/Build/Products/libXMPCoreStatic.a-cadre-Xlinker dependency_info - Xlinker/Users/sboegel/Library/Developer/Xcode/DerivedData/dng_validate-fjjibtptniqsozaqnhhmkybxy udz/Build/Intermediates/dng_validate.build/Default/dng_validate\ release.build/Objects-normal/i386/dng_validate_dependency_info.dat o/Users/sboegel/Downloads/dng_sdk_1_4/dng_sdk/targets/mac/release/dng_validate

  Undefined symbols for the i386 architecture:

  "< Std::string > TXMPMeta: Initialize() ', referenced from:

  XMPFiles::Initialize (unsigned int, const char *, const char *) in libXMPFilesStatic.a (XMPFiles.o)

  "TXMPMeta < std::string >: SetProperty (const char *, const char *, const std::string &, unsigned int) ', referenced from:

  P2_MetaHandler::SetAudioInfoFromLegacyXML (bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetVideoFrameInfoFromLegacyXML (XML_Node *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  MP3_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MP3_Handler.o)

  ReadIDXFile (const std::string &, const std::string &, TXMPMeta < std::string > *, bool &, MD5_CTX *, bool) in libXMPFilesStatic.a (SonyHDV_Handler.o)

  XDCAMEX_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (XDCAMEX_Handler.o)

  XDCAM_Support::GetLegacyMetadata (TXMPMeta < std::string > *, XML_Node *, const char *, bool, std::string &) in libXMPFilesStatic.a (XDCAM_Support.o)

  RIFF::importProperties(RIFF_MetaHandler*) in libXMPFilesStatic.a (RIFF_Support.o)

  ...

  "TXMPMeta < std::string >: SetProperty (const char *, const char *, const char *, unsigned int) ', referenced from:

  ID3_Support::ID3v1Tag:read(XMP_IO*,_TXMPMeta<Std::String>*) in libXMPFilesStatic.a (ID3_Support.o)

  P2_MetaHandler::SetXMPPropertyFromLegacyXML (bool, XML_Node *, char const *, char const *, char const *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetGPSPropertyFromLegacyXML (XML_Node *, bool, const char *, const char *) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetAltitudeFromLegacyXML (XML_Node *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  MP3_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MP3_Handler.o)

  MPEG4_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MPEG4_Handler.o)

  ReadIDXFile (const std::string &, const std::string &, TXMPMeta < std::string > *, bool &, MD5_CTX *, bool) in libXMPFilesStatic.a (SonyHDV_Handler.o)

  ...

  "TXMPMeta < std::string >: DeleteProperty (const char *, const char *) ', referenced from:

  P2_MetaHandler::SetRelationsFromLegacyXML (bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetDurationFromLegacyXML (bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetGPSPropertyFromLegacyXML (XML_Node *, bool, const char *, const char *) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::SetAltitudeFromLegacyXML (XML_Node *, bool) in libXMPFilesStatic.a (P2_Handler.o)

  P2_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (P2_Handler.o)

  JPEG_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (JPEG_Handler.o)

  MPEG4_MetaHandler::ProcessXMP() in libXMPFilesStatic.a (MPEG4_Handler.o)

  ...

  Any hint is appreciated. Thank you

  I found a trick here (Xcode Compile Error Undefined symbols for architecture x86_64: "TXMPMeta < std::string >: Initialize () which lacks an include statement, but which is defined in the sdk dng (dng_xmp_sdk.cpp):")

  #if qMacOS

  #ifndef MAC_ENV

  #define MAC_ENV 1

  #endif

  #endif

  #if qWinOS

  #ifndef WIN_ENV

  #define WIN_ENV 1

  #endif

  #endif

  #include < new >

  #include < String >

  #define std::string TXMP_STRING_TYPE

  #define XMP_INCLUDE_XMPFILES qDNGXMPFiles

  #define XMP_StaticBuild 1

  #include "XMP.incl_cpp".

  This cannot be the reason...

  Hi I came across similar issues. Try changing the X operating system deployment target "OS X 10.8" in the deployment section parameters build for the dng_validate project.

• Help, please! White screen IOS Release version

  IM do crazy for it, but when I export the Release version and install the application on my iphone, I get just the splash screen. The debug version works well in the iphone and the Simulator.

  I'm using Flash Builder 4.6

  Please help me

  Thank you

  Hello

  of course, you can!

  On your mobile phone, as you do with the debug!

  You should always try the Release version!

  I found my bug in the debug version worked perfectly.

  Have a look here

  http://forums.Adobe.com/message/4516888?TSTART=0

  It was the same for me!