Building a dynamic array or the live 3D route

Similar Questions

• How to build a dynamic array index in the attribute 'to' house arrest

  Hi all
  
  I need to generate xml output with the appearance of multiples of the same complex element. The number of items is calculated dynamically. I use bpelx: append to add items, but I'm crashes when I try to assign values to elements using a variable to index items.
  
  How can you dynamically assign an array index variable in the attribute 'to' a copy instruction? I was able to do in the attribute 'from' the copy statement, following the examples indicated in the documentation for the xpath function. But when I use the concept of intermediate variable, I get a compiler error stating that the query attribute must start with ' / '.
  It works fine when I hard code the index in the attribute of "query" in the statement "copy to".
  
  I use 10.3.3 version JDev and 10.3.3.0 PM BPEL version.
  
  Here are the two methods I've tried:
  ----------------------
  < copy >
  < expression = "concat ('/ client: assTestProcessResponse / client: ScreeningComments / client: CommentItem [', bpws:getVariableData('notesCount'),'] / client: CommentText')" / >
  < variable = "queryText" / >
  < / copy >
  < copy >
  < expression = "bpws:getVariableData('noteText')" / >
  < variable = part of the 'outputVariable"="payload ".
  Query = "bpws:getVariableData('queryText')" / >
  < / copy >
  ----------------------
  < copy >
  < expression = "bpws:getVariableData('noteText')" / >
  < variable = part of the 'outputVariable"="payload ".
  Query = "/ client: assTestProcessResponse / client: ScreeningComments / client: CommentItem ["bpws:getVariableData(&quot;notesCount&quot;) " ""] / client: CommentText "/ >
  < / copy >
  
  ----------------------
  
  Has anyone had a similar problem? Please let me know this is doable and how.
  
  Thank you
  A.T.

  Hello

  I don't know if the following solution is what you want, but I'll try to explain how this would work; (o)

  I understand your question, you have a following like the watch of simple structure xml schema:

  The element is a complex type that has as a child element.
  The element can have 1.. * items

  As you explained that you know how to add loose, common is to use an XML Fragment example

  As you can see now there are two elements with the child element

  After the task to assign the variable content looks like:

  After adding the fragment, you can set the value for the for the first content element in the following way:

  The important thing is to know how to point to the correct position within the payload. It works with that part of the query statement

  [position()=1]
  

  or you can of course use the short version

  [1]
  

  The next task is to dynamically create the reference to the position. Therefore, you can for example use a variable. You can for example something like this:

  And the last step is to set the element of content dynamically using the defined variable

  The only thing to use the defined variable is that part of the query:

  [position()=bpws:getVariableData('Position_Variable')]
  

  Finally, the XML Structure should look like this:

  
    
      
        
          
            Content1
          
          
            Content2
          
        
      
    
  
  

  Concerning

  Alex

• How to fill a dynamic array in the form of Adobe Livecycle with cfpdfform?

  Hi all

  After two days of searching about it without results, I hope someone here can help me.

  The problem:

  I have an Adobe PDF form created with Adobe Livecycle Designer that has a dynamic table inside. The Table1 table consists of a header line with 4-cell text and a data line Row1 with four cells each with a Textfield Cell1 and Cell2, Cell4 Cell3.

  Table 1 is inside a subform mytable. The subform is made to flow and the Row1 the link line repeat for each item of verified data.

  Everything is included in the form1 form standard subform.

  When I use the following code, I assumed that the table should have two rows... because it says it will be dynamic:

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Untitled Document < /title >
  < / head >

  < body >

  "< cfpdfform action ="fill"source ="test.pdf"destination =" testout.pdf "overwrite ="yes">
  < cfpdfsubform name = "form1" >
  < cfpdfsubform name = "mytable" >
  < cfpdfsubform name = "Table1" >
  < cfpdfsubform name = "Row1" >
  < cfpdfformparam name = "Cell1" value = "1" >
  < cfpdfformparam name = "Cell2" value = "2" >
  < cfpdfformparam name = "Cell3" value = "3" >
  < cfpdfformparam name = "Cell4" value = "4" >
  < / cfpdfsubform >
  < cfpdfsubform name = "Row2" >
  < cfpdfformparam name = "Cell1" value = "5" >
  < cfpdfformparam name = "Cell2" value = "6" >
  < cfpdfformparam name = "Cell3" value = "7" >
  < cfpdfformparam name = "Cell4" value = "8" >
  < / cfpdfsubform >
  < / cfpdfsubform >
  < / cfpdfsubform >
  < / cfpdfsubform >
  < / cfpdfform >

  
  < cfpdfform action = "read" source = "testout.pdf" result = "testout" / > "
  < cfdump var = "#testout #" >
  < / body >
  < / html >

  What caught is:

  The testout.pdf displays a single row, with values 1,2,3,4 the second row is visible only when I export data in xml format, but not in the PDF file.

  Please can someone enlighten me?

  Thanks and greetings

  Gilbert

  When filling out your fields of pdf, you can search through all the records in a query as follows...

  
             
             
   

  He will manage two lines or thirty anyway.  In this case my fields in the pdf file have the line # as a suffix.

• build a dynamic array to an array of 1 D of waveforms 4 graphics, including time and all data information

  Hallo!

  I tried to put entries generated in a table with the current value of the time stamp in the first column and the data of a table 1 d of waveforms of 4 cards in the other 4 columns.

  I have some difficulties to match the data in the table. I ve simulated the code I've written and I see that the time stamp but I ve got none of the values of data in my table. I want to ask you what you think of my code and how can I achieve my goal?

  Corresponding VI is attached below.

  Thanks in advance for the answer.

  I think you're looking for it.

• 8600 HP all-in-one more: 8600 wireless printer can accept dynamic address of the cable mode, / router?

  Got new Suddenlink cable modem/wireless router that uses dynamic addresses - only but the 8600 all-in-one printer uses static-how to to get wireless printing? The printer can be reconfigured to accept dynamic? How?

  Thank you

  Yes, it can, information in your printer manual. You can reset the network for DHCP settings. In addition, your router supports IP static. You just need to configure it. Info is in the router manual or call them.

• How to fill a dynamic array according to the choice of the Viewer

  Hello

  I came across a dead end on my page "events".

  There is a dynamic array, get the information from a database. Initially, it will display upcoming events.

  At this point, my question is this:

  * Can fill the dynamic table based on a condition where the current date and the date of the event (as in the comic book) will be compared and if the date of the event is aware of the date, it will appear in the table. Otherwise, it will not.

  If I can do it, can someone please help me with the code?

  In addition, on the right side of the page there are 3 options for the Viewer:

  1. display upcoming events

  2 discovered past events

  3 search for events by month and year

  What I want to do, is that when the viewer clicks on 'past events', the table will be reset and populated by these events, whose date is exceeded.

  When the viewer clicks on "upcoming events", the table is reset again and filled with the relevant events.

  When the viewer selects a month and a year, the database to find reviews of research.

  Can we write this in php? Since I read smwhere that php does not work with onclick functions... I got confused. Cuz in my table data should vary depending on what the Viewer is clicking (coming events/events/research past events). I do not want to create pages for each type of event.

  If anyone has a better suggestion to complete this task, please share!

  Thank you!

  > Can I complete the dynamic table based on a condition if the current date and the event date (as in the comic book)

  > will be compared and if the event date is later than the current date, it will appear in the table. Otherwise, it will not.

  Of course. Just compare the date field in your database with the current time as returned by the function of date of your DBMS. Assuming you are using MySQL, you would compare your column with the currdate() function and the appropriate use of upper / lower to operators in the WHERE clause. If you don't know what a WHERE clause is then I invite you to learn SQL as soon as possible. You can't build data sites without a basic knowledge of SQL.

  > Since I read smwhere that php does not work with onclick functions...

  This means that php is a server side, where interactions with the user always occur on the client's site. But that doesn't mean that you can't call action from the side event on the client side server. Certainly, you can and would be.

  You should consider adding links to the page of dynamic array passing a querystring to the php script that determine which filter to add in the future WHERE clause to the current date, less, etc..

  Also, in the future, please post those questions on the application development forum.

• How to change the display of a dynamic array limits?

  Hi people,

  I use DW CS4 and PHP. I have a php page with a dynamic array and the repeating region that I built for my client. This table lists our list any active member. Initially, I built the PivotTable to display records that only 50 to 300 + records because both made a long page. My client wants to now all records on a single page, because he does not like to click on through the first Recordset Paging - next - previous - last list to find who he is looking for. I tried to change the behaviour of repeat in all records (rather only 50) region, but it still shows that 50. I don't know that it is because initially when I set up the dynamic table, I limited to 50 it. Is there an easy way to change the dynamic array of 50 to all records, without rebuilding the whole page? I have looked in many places and cannot find a way to change this. Thanks for your help,

  Gail

  If the page in question is - apart from the table - not too complex, the probably simplest is to...

  (a) copy the table * code * to the Clipboard and paste it in, say, a simple text editor such as Notepad

  (b) to rename the current document to something else for backup purposes

  (c) create a new document and insert a simple recordset (must be named identically to allow an easy transition)

  (d) to paste the code in the table in here

• Build/update dynamically the table 3D

  Hi all

  I'm having a problem with the dynamic generation of a 3D of the following set of data table:

  x: {1,2,3,4,5}

  y: {1,2,3,4,5}

  Z_1: {1,2,3,4,5}

  Z_2: {1,2,3,4,5}

  Z_3: {1,2,3,4,5}

  Z_4: {1,2,3,4,5}

  Z_5: {1,2,3,4,5}

  where there is (5) Z amplitudes associated with each measurement location.  What I am able to statically (from the above values x and y tables 1 d and 2D table Z) is to create a 3D Board made up of x and is indexed intensity to the graphic format of the 2D tables.  Each page of the table corresponds to each of the 5 Z amplitudes measured at each location.  In the attached VI, the Array Build function works perfectly for the static case where the entire data is available.  I followed the example of a another discussion forum will be subject to the provisions of nest two loops construction 2D array in the inner loop and incrementing the pages on the outer loop. The static situation is resolved.

  However, my goal is to graphically present data he is taken, point by point, to the user.  The other attached VI simulates this scenario, incrementation of x and y positions based on the measure button.  Z matrix indicator shows that the 2D Array (each individual page) is in the proper format.  The construction of the 3D picture is dynamically where I'm having problems.  I tried to build table and replace a subset of table, but none of these functions to produce the desired result.

  In the case of building table, 3D table is correctly based on the first measure: for x = y = 1, 2D array page0 is set Z_1 in position (1,1), page1 has the Z_2 value in the position (1,1), page2 Z_3, etc..  However, on the second measure, as expected, the berries are concatenated page5 have Z_1 values in the (1,1) and (2,2) positions.  This result is properly formatted, however, should the counted array 3D page is limited to 5 (page0, 1, 2, 3, 4).  So ideally, page5 should in this case replace page0.  So build array results in the correct format but concatenation is not desirable.

  The subset of spare board was made with the index of the page (outside of the loop) number to specify the subset of the 3D Board needs to be replaced.  The result was an empty 3D array.

  Thank you any help to solve this problem.

  kmsk wrote:

  Any suggestions on how to handle filling out table 3D of unknown size?

  If the size of the final table has a reasonable upper limit, you can initialize an array of slightly oversized, then keep using the subset of the table replace. It will be much faster and more effective memory than gradually more and more large networks.

  When the purchase is made, you can cut to the final size.

  Aircraft add to a table 3D using 'insert into array' or 'Build array' (favorite?), cause memory frequent shifts and might slow down your code by orders of magnitude in casing of excessive fragmentation of memory.

• Dynamic array, not filling, works very well with the test button

  I built a recordset object and tested with the Test button and the Recordset returns my data on my remote server.  I then put a dynamic array on my php page that it points to the recordset of this work and that the PivotTable is empty.  The table displayed in design mode correctly with the recordset.vcolname, but when running that data are not to be connected.  I even tried just drag a few pieces of data on and still no data.  Any help would be appreciated.  Have a great day!

  There are a lot of things I want to mention, but do not have the time to.

  I'll start with the fact that you are using soon be deprecated MySQL instead of MySQLi or PDO.

  Second, you can't have your markup in the head section of your document as in

  Third, none of the session variables will not work if you start the session after your conditional statements. In other words, session_start() should be at the top of your document.

  There is more, but lack of time prevents me from analyzing those.

  My advice is to start with my third point, which is to place the session_start() at the beginning of your document and see if that changes things.

• How to activate the filtering and sorting in a dynamic array

  Hello everyone,
  I'm going crazy with this problem, hope that someone could help me! I have a dynamic array based on a view that changes its application programmatically. For its dynamic nature, I did in my mainPageDef no reference to the attributes of the table:
  
  <>executables
  < variableIterator id = "variables" / >
  < iterator lie = "DLOV_1" RangeSize = "25".
  DataControl = "DLOV_AppModuleDataControl" id = "DLOV_1Iterator".
  R = "always" Sortable = "true" / >
  < / executables >
  < links >
  < Tree IterBinding = "DLOV_1Iterator" id = "DLOV_1" >
  < nodeDefinition Name = "DLOV_10" >
  < / nodeDefinition >
  < / tree >
  < / links >
  
  
  Jspx page I have:
  
  
  < af:table value = "#{bindings." DLOV_1.collectionModel}.
  var = "row".
  lines = ' #{bindings. " DLOV_1.rangeSize}.
  emptyText = "#{bindings." DLOV_1.viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." DLOV_1.rangeSize}.
  rowBandingInterval = '0 '.
  filterVisible = "true" varStatus = "vs."
  selectedRowKeys = ' #{bindings. " DLOV_1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." DLOV_1.collectionModel.makeCurrent}.
  rowSelection = "single" id = "t1" >
  < af:forEach elements = "#{bindings." DLOV_1Iterator.attributeDefs}.
  var = 'def' >
  < af:column headerText = "#{def.name} '"
  sortable = "true" id = "c1".
  filterable = 'true '.
  filterFeatures = "caseInsensitive" >
  < af:outputText value = "#{row [def.name]}" "
  ID = "ot1" / >
  < / af:column >
  < / af:forEach >
  < / af:table >
  
  
  which works really well with the code of my bean (the one who changes the query and execute it):
  
  
  If (am.findViewObject ("DLOV_1")! = null) {}
  am.findViewObject("DLOV_1").remove ();
  System.out.println ("off");
  }
  ViewObjectImpl dLovView = (ViewObjectImpl) am.createViewObjectFromQueryStmt ("DLOV_1", (String) qryTxt.getValue ());
  dLovView.executeQuery ();
  AdfFacesContext.getCurrentInstance () .addPartialTarget (lovTable);
  
  
  Now the problem is I can't get the functionality of filtering and sorting of column. How can I achieve that? I noticed that you define the defName in the nodeDefinition to provide a 'model', but I can't do that because my table does not have a fixed structure.
  Is there a solution?
  Thanks in advance!

  You can pass me the sample, will take a look - use the same mail id that you will find my profile

• Dynamic array

  Hello.

  Im using netDDE, data acquisition over a hundred plant.

  DDE advise check Multi.vi scans all channels but outputs only changed data using refnum as an index.

  I was able to build a picture 2D with refnum and the change data.

  In fact, I would like to create a dynamic array where:

  (1) .data again scan is identical to the previous if DDE advise is not the output data

  (2) data for new scan are updated

  Of course the size of the las table must be always the same, i.e. the number of my data channels.

  Is there a clever way to do this?

  Thank you very much

  Antonio

  Hi Antonio,.

  change the function "Insert table" with "array to replace Element.

  Mike

• several images capture and read their path to send the byte array to the web service

  Hello

  Have a problem when the image capture, the requirement is to open the camera and capture multiple images, and once done it should send the array of bytes to the web service, wrote the class with reader and Video Control of the code and then using the saved file to store image API, but when the user capture multiple images it replaces previous if I keep the path to say dynamic by using the date and time then how I just know what images are recently captured and their path, one time I know that the path of recently captured using new fileconnection images can read the image byte array.

  Hi Nishant,

  find the attached code. In this demo, you will find:

  (1) the use of the listner log file system

  (2) how to move data from one folder to another.

  (3) how to read file system byteArray.

• How to fill a dynamic role with the members of the ad group

  Hoping someone can help with that I don't know where to start.

  I want to build a dynamic role that pulls in the members of certain groups from Active Directory.  Let's say I have two Active Directory groups: GROUPA and GroupB.  My goal would be to have the dynamic, filled with each group the user role.

  Someone at - it an example of SQL code snippet they could share?

  You can build this quite easily with the wizard:

  

  Which generates the SQL code:

  (UID_Person in (select UID_Person from the UNSAccount join UNSAccountInUNSGroup on UNSAccount.UID_UNSAccount = UNSAccountInUNSGroup.UID_UNSAccount where (UNSAccount.UID_UNSRoot = no * YOUR UID FIELD *') and (UNSAccountInUNSGroup.UID_UNSGroup in (select UID_UNSGroup in the UNSGroup where cn = is placed '))) and (UID_Person in (select UID_Person in the UNSAccount join UNSAccountInUNSGroup on UNSAccount.UID_UNSAccount = UNSAccountInUNSGroup.UID_UNSAccount where (UNSAccount.UID_UNSRoot = no * YOUR UID FIELD *') and (UNSAccountInUNSGroup.UID_UNSGroup in (select UID_UNSGroup in the UNSGroup where cn = GroupB')))))

• Any success with the creation of dynamic content with the api?

  My company is looking to build a dynamic newsletter and we usually have a lot of articles, but we want to connect with elequa auto generate dynamic content. Then we can use this content to build the newsletter in a model. ? Someone at - it do something similar to this?

  This is an old issue, but for someone who comes here looking for answers:

  Your best bet in the future is to create a content Service AppCloud (develop a content AppCloud Service) under the new Framework Developer Eloqua AppCloud (Introducing Eloqua of AppCloud Developer Framework).  This will allow you to insert dynamically content in landing pages and emails.

• Shading on a dynamic array (file included)

  Hello!

  I have a dynamic array with a "repeating" section (which consists of Row1 and Row2). Each "section" needs to switch to a different color. I tried the box 'shading alternating' on the palette object but it works the way I need to I'm looking to see if this can be done in the code. Do not try to do the 'lines' replacing. I need the "sections" in alternation. I did some research and could not really find something to help me with.

  My colors:

  First: 255, 255, 242

  Second: 236,245,255

  Here is the file:

  https://files.Acrobat.com/preview/592e1cb8-A0DE-4337-A323-321dd66ba261

  Thanks in advance!

  You can try to put this script in the layout event: loan of both of your lines:

  if (this.parent.index % 2 == 0)
            this.fillColor = "255, 255, 242";
  else
            this.fillColor = "236,245,255";
  

  Kyle